Calls missed, received and places not connected to IP Phone 7945 after you have moved to another site

Similar Questions

• Virtual machines are not able to access the network after you have moved the host

  We moved our 4 ESX host to a different physical switch and now our VMs cannot access the network.

  I can access the host via client vsphere.  Our host has 2 network cards.  They are both members of the vSwitch0.  I have 1 VM network defined, and they are both members of it.  The network adapters, vmnic0 and vmnic1 are also part of my VMkernel which I do not know that I need because I have 1 ESX Server and do not use iscsi or NFS.

  the two cards are also part of my service console.

  According to my host "configuration / display: vitual switch, it looks like all my virtual machines are defined to use the vswitch."

  the two physical network adapters is connected to the same switch.  I did not go to any configuration on the switch.

  

  The steers would be appreciated.

  Thank you

  Paul

  

  Welcome to the community,

  It sounds as if the physical switch ports are not configured correctly. Please check that port security is disabled on the switch (switchport mode access) ports and spanning tree portfast is (if any).

  André

• Error iTunes - iTunes could not connect to the store purchases - if you have any firewall software, make sure it has been set to allow communication on port 443.

  My itunes has been fine. All of a sudden today it now gives me this error: error Itunes - iTunes could not connect to the store purchases - if you have a software firewall, make sure that it has been set to allow communication on port 443.

  I do not have my firewall active. I connected to itunes, quit itunes, reconnected - still a problem.

  Was there an update and now it's a bug? Help!

  Thank you!

  Run the Console application in one of the following ways:

  ☞ Enter the first letters of his name in a Spotlight search. Select from the results (it should be at the top).

  ☞ In the Finder, select go utilities ▹ of menu bar or press the combination of keys shift-command-U. The application is in the folder that opens.

  ☞ Open LaunchPad and start typing the name.

  The title of the Console window should be all Messages. If it isn't, select

  SYSTEM LOG QUERIES ▹ all Messages

  in the list of logs on the left. If you don't see this list, select

  List of newspapers seen ▹ display

  in the menu at the top of the screen bar.

  Click on the clear view icon in the toolbar. Then take an action that does not work the way you expect. Select all of the lines that appear in the Console window. Copy to the Clipboard by pressing Control-C key combination. Paste into a reply to this message by pressing command + V.

  The journal contains a large amount of information, almost everything that is not relevant to solve a particular problem. When you post a journal excerpt, be selective. A few dozen lines are almost always more than enough.

  Please don't dump blindly thousands of lines in the journal in this discussion.

  Please do not post screenshots of log messages - text poster.

  Some private information, such as your name or e-mail address, can appear in the log. Anonymize before posting.

  When you post the journal excerpt, an error message may appear on the web page: "you include content in your post that is not allowed", or "the message contains invalid characters." It's a bug in the forum software. Thanks for posting the text on Pastebin, then post here a link to the page you created.

  If you have an account on Pastebin, please do not select private in exposure menu to paste on the page, because no one else that you will be able to see it.

• should I connect to internet to install after you have entered the serial number

  should I connect to internet to install after you have entered the serial number

  Serial number for which program?

  You need an internet connection as well as your serial number will register and activate your program

• Message window "Not connected to the internet" appears when you have MS and downloads updates.

  Whenever I try to use Windows Update or download MSE I tells me that my computer is not connected to the internet.  My web browser works fine, only when updating or loading of a product of MS IE. Silverlight, LifeCam, MSE...

  I have not done the clean boot - no good

  I tried to add tusted sites - not good

  I disabled and deleted some security I could find - no good

  This is a brand new machine - Dell Studio XPS with Windows 7 installed.  No Malware or Spyware that I see.  Help, please.

  Q: you have no anti-virus application installed now?
  A: No.

  You see the effects of a hijackware infection. See...

  Cleaning a compromised system
       http://TechNet.Microsoft.com/en-us/library/cc700813.aspx

  Personal data backup (which none should be considered 100% reliable at this point) then format the HARD disk and do a clean install of Windows. Please note that a repair installation (upgrade AKA on-site) will NOT fix it!

  HOW to do a clean install of Win7: see "using the custom installation option" and formatting the hard drive section of http://windows.microsoft.com/en-us/windows7/Installing-and-reinstalling-Windows-7

  NOTE: If your computer came with a set of disks, there is a hidden partition restore (not to be confused with the restoration of the system) you would use to do the clean install (AKA a "destructive recovery").

  After the new installation, you will have the equivalent of a "new computer" in order to take care of EVERYTHING on the next page before connecting the machine to the internet or one local network (i.e. other computers) AND BEFORE to plug in a flash, SD card, or any other external drive to the computer otherwise:

  4 steps to help protect your new computer before going online
       http://www.Microsoft.com/security/pypc.aspx

  IMPORTANT! -Online any Norton or McAfee free trial which is preinstalled on the computer when you bought will be reinstalled (but invalid) when Windows is reinstalled. You MUST uninstall the trial for free AND download/run the removal tool appropriate before installing updates or IE upgrades AND BEFORE installing your new anti-virus application.

  Norton Removal Tool
       FTP://ftp.Symantec.com/public/english_us_canada/removal_tools/Norton_Removal_Tool.exe

  McAfee Consumer product removal tool
       http://download.McAfee.com/Products/Licensed/cust_support_patches/MCPR.exe

  See also:

  Risks & benefits of P2P file sharing
  http://www.Microsoft.com/protect/data/downloadfileshare/filesharing.aspx
  http://blogs.technet.com/MMPC/archive/2008/10/06/the-cost-of-free-software.aspx
  http://www.us-cert.gov/CAs/tips/ST05-007.html

  Measures to help prevent spyware
  http://www.Microsoft.com/security/spyware/prevent.aspx

  Measures to help prevent computer worms
  http://www.Microsoft.com/security/worms/prevent.aspx

  Avoid fake security software!
  http://www.Microsoft.com/security/antivirus/rogue.aspx

  If you need additional assistance with the clean install, please start a new thread in this forum: http://social.answers.microsoft.com/Forums/en-US/w7repair/threads

  If these procedures look too complex - and there is no shame in admitting this isn't your cup of tea - take the machine to a local, good reputation and stand-alone computer (that is, not BigBoxStoreUSA or Geek Squad) repair facility.

  Good luck!

  ~ Robear Dyer (PA Bear) ~ MS MVP (that is to say, mail, security, Windows & Update Services) since 2002 ~ WARNING: MS MVPs represent or work for Microsoft

• Unable to connect to the print server after you have disconnected from him

  We have a connected printer directly to a Windows 7 Pro computer, and then using this workstation to share the printer between about 4 other computers.  One of the computers randomly stopped printing to the printer.  I open devices and printers and deleted the printer in the list to try to add again.  Once I removed the printer, I tried to connect to the computer that is sharing the printer (start > \\computerName\), but could not even connect to the computer that hosts the printer in order to reconnect.  Someone had a similar problem? If so, please answer.

  Thank you!

  I discovered the problem resided with Kaspersky Anti-Virus blocking "network attacks".  Once this has been changed, I was able to connect and print.  Thank you, however!

• the WAN connection becomes too slow after you have configured the VPN (Site Site)

  Hello

  I have two branches connected via WAN (MPLS) connection using two 2921 routers.the connection is 2 M.

  I set up a VPN between these two sites, but after the connection has become very slow.

  y at - it something I can do to speed up the speed of connection.

  VPN proposals are:

  Proposals of the phase 1: 3DES, pre-shared,.

  Phase 2 proposals: esp-3des esp-sha-hmac

  I don't think that lower levels of security proposals will add a lot to the speed...

  Hi Marc,

  one thing you should definitely is a hardware encryption go if you do not already tht, it also reduces the load on your cpu

  You can try other things is play with mtu, according to your line mtu and what applications are mainly used. try setting the mtu of at least 60 odd bytes lower than the mtu and also sometimes server line recommended mtu settings like server many have obligation to mtu to 1300 or 1400, if that's not it can cause a lot of re transmissions, you can also try fragmentation before encryption

  http://www.Cisco.com/en/us/docs/interfaces_modules/services_modules/VSPA/configuration/guide/ivmvpnb.PDF

• Advisior segment showing only not USERS tablespace fregmented after you have moved the image

  All,
  
  OK, I did a simple test to see if the segment oracle Advisor will report whether the tablespace is fragmented or not.
  
  I had a tablespace USERS with about 9000 pictures and took about 2.2 GB in size. I created new tablespace to hold all the images and moved these images of USERS to my new tablespace. After that, I thought that my USERS will be very fregmented, because he settled on 2.2 GB of data. I ran Advisor segment on all areas of storage. However after viewing all DBA_Advisor views he didn't complain of the LOB segments of USERS tablespace.
  
  Am I missing something here?
  
  Thank you

  But still my USERS is fregemented correct?

  What metrics to what value quantifies the 'fragmentation '?

  How can I recover this wested space?

  The space is NOT wasted & there is nothing can be recovered.
  The vacant space will be reused when new data are inserted to the remaining users tablespace tables.

• After you have moved a large number of emails in a new folder, number of emails that are unrelated in time and the topic themselves grouped into son

  Recently, I moved a large number of emails (filtered by sender) in a new folder I created in Thunderbird.
  The emails themselves arranged in threads that are independent of any discernible factor. Some e-mails with 7 years in dfference are strung together. Also, date / reception function triage is not properly sort, IE the new emails are not at both ends of the sort, nor in the nets. Once again, no visible trend.
  I checked on gmail, where emails are hosted, and none of these issues is apparent.
  It's important questions to find emails, especially since when I enter a search term in the filter and it has no result, but then generate results when I use the search function.

  OK, right click on the folder, select properties and then repair. Just in case that helps.

• SRM does not start after you have moved the database

  We're under 4.1 SRM and moved its sql database to a new server sql (new server sql a different host name).  We moved successfully to the virtual center & Manager Update bases sql data, but after moving srm4.1 database, the srm service does not start...

  so far, I uninstalled SRM (DO NOT remove the SRM database)... After uninstalling SRM, I rebooted the server.  Then I have re-directed the SRM installation and started going through the installation of MRS... After pointing the SRM installed on the server vcenter, port 80, and pointing to an existing sql database, etc., I get a thumbnail of certificate message and a prompt on the creation of a new certificate, which i say 'yes' to... Installation continued on and arrived at the end when it says "create certificate"... then does not say "cannot install the certificate...". Database error has occurred. "At this point, the installation failed

  Any ideas on how to remove the old certificate or work around this error?

  Thank you

  I think the error message is misleading in this case and the problem is not related to the certificate.

  I still think that it is permission DB / configuration number.

  Following links may be useful:

  http://communities.VMware.com/thread/212157

  http:// http://KB.VMware.com/selfservice/microsites/search.do?language=en_US&cmd=displayKC&externalID=1015883

  Michael.

• How to connect all the image after you have moved the records?

  I have a lot of illustrator files in folder A and each file has tons of images from different folders (B, C, D). All of these files are inside a main root folder.

  Recently I moved this folder to an external hard drive, then all the illustrator files disconnect with the images. Is it possible to connect all these pictures all together instead of recreating a link one by one?

  Thank you!

  you open a file HAVE, when you get the dialog box "cannot find the file related ABC...". »,

  -Check the box 'apply to all '.

  -Click the 'repair '.

  -Navigate to the location of the new ABC file

  All images must automatically be relinked

  You would need to repeat for each file HAVE

• I do not use sync and am not connected? Why my favorites are synchronization?

  My desktop computer has a series of bookmarks that I use at work. My home PC has another, different set of bookmarks that I use at home. I do not use sync and am not connected to sync on each PC. Why my favorites are the synchronization between two PCs? For example, I noticed several bookmarks near the top of my bookmark menu over a line of separation that I do not have to work. I deleted them. I come home and find those missing same bookmarks from my PC at home. I do not want to synchronize anything between the two computers, why what is happening?

  Maybe an add-on is the sync these for you.

  Refresh (called "Reset" in older versions of Firefox) can solve a lot of problems in restaurant Firefox as his default factory while saving your bookmarks, history, passwords, cookies, and other essential information.

  Note: When you use this feature, you will lose all the extensions, toolbar customizations, and certain preferences. See article Firefox Refresh - reset modules and parameters for more information.

  Refresh for Firefox:

  1. Open the troubleshooting information page using one of the following methods:
     • Click the menu button

       

       click Help

       

       and select troubleshooting information. Should open a new tab containing your troubleshooting information.

     • If you are unable to access the Help menu, type Subject: support in your address bar to bring up the troubleshooting information page.
  2. At the top right of the page, you should see a button that says 'Refresh Firefox' ('reset Firefox' in older versions of Firefox). Click on it.
  3. Firefox closes. Once the update process is complete, Firefox will display a window with the imported information.
  4. Click Finish and reopen Firefox.

  This corrects the problem? Please report to us!

  Thank you.

• TUXEDO C server using Oracle 11 g ProC receives ORA-01012 not connected by mistake on EXEC SQL PREPARE

  Porting of some former service C code for TUXEDO that used Informix to Oracle... a trial.

  Service logic uses dynamic SQL to SQL and pre-compiler instructions to then run the

  Statement and return to the client in the form of an XML doc.

  Port is done now and during the test initial (after you have configured the TUXCONFIG, environment, Oracle DB, etc) am receiving an Oracle ORA-01012 not connected when the TUXEDO service routine tries to prepare the SQL SELECT statement.

  The statement in question is a simple "SELECT * FROM EMP".

  The server is defined in a group belonging to a group that has an OPENINFO string that connects to the Oracle DB.  This seems to be the case I see the sqlplus using the view v$ session where the user sessions connect when servers of launch.

  No idea why the EXEC SQL PREPARE is causing the server to disconnect from the DB?

  THX.

  W. MacKenzie

  It was with the inclusion of the DB = orcl tag in my OPENINFO in the TUXCONFIG.  Remove that and specify the database instance in the envfile for the configuration.  Works now.

• buy an iphone 5s by amazon and I came with iCloud blocked an account... {I called the seller and does not that I do that I'm from Venezuela please need your help}

  buy an iphone 5s by amazon and I came with iCloud blocked an account... I called the seller and does not that I do that I'm from Venezuela please need your help

  No one here can help you. The device is locked activation. Since you have made the purchase by Amazon, you can check with them to see if they will stand behind it. No one on the forum, or Apple can help you remove the lock. Only the previous owner can do this. I suggest that you demand a refund, so let's start a claim with Amazon about this dealer.

• Login password forgotten and could not connect to Desktop!

  Hello Robot Microsoft Community,

  I use a Local account to connect to the desktop forgotten my password and could not connect to the desktop more.

  My current operating system is Windows 7 ultimate, I don't want to clean install.

  I have some important files.

  Please help if you're not a robot!

  Hello

  You could try the following.  If it fails, it will be necessary to reinstall Windows.

  Microsoft's strategy concerning lost or forgotten passwords

  https://support.Microsoft.com/en-us/KB/189126

  Forgotten password and other connection problems

  http://Windows.Microsoft.com/en-us/Windows-Live/account-reset-password-forgot-FAQ

  * taking Smittychat here