Calls to Windows 7 usb port D: at first then 1 disk either

Similar Questions

• Bluetooth Windows 7 USB port problem

  Hello

  I use a bluetooth class 1 dongle (manufacturer unknown) with the V 8.00.03 Premium toshiba bluetooth stack and a bluetooth headset. The specifications for the dongle are: Bluetooth V1.2, compatible USB V1.2/2.0

  I have a strange problem when changing the USB dongle is plugged. If I change the dongle on another USB port, searching for devices fails. I tried to uninstall the battery and of course remove device from the bluetooth Manager window.

  Also, strangely, when I plug the dongle on a USB extension on the same port, it does not either. When I put the dongle into the same USB port it works fine as usual.

  I want to change the USB port so that I can get the best reception, like its plugged in to the back at the moment. Also, I want to use the usb expansion for the same reason, to bring out above the office. Oddly, if, as I say, it does not work with the extension (just a regular cable with USB male on one end and female on the other to plug the dongle in.)

  Is this something to do with voltage drop down a cable? And regarding the change of the ports usb is it something to do with ports being installed on this USB port bluetooth only? I don't know exactly how ports bluetooth works, how they settle etc.

  Thanks much for any help.

  Hello

  > Also, strangely, when I plug the dongle on a USB extension on the same port, it does not either. When I put the dongle into the same USB port it works fine as usual.

  I think you're wrong here buddy
  If you use another manufacturer's computer, and if you have problems using it, you should check the page of computer manufacturing support.

  In my opinion the question isn t linked to Toshiba BT stack but to the USB ports on your computer.

• Problem of 2007FP, Windows 10 USB ports,

  I have a Dell 2007fp monitor connected to an HP Pavilion Elite HPE Office 10 64-bit windows running. Recently I decided to start using the USB connections on the monitor, so I bought the USB upstream cable and plugged. When I do that, I get a message that says: USB device not recognized. If I check the Device Manager, I get an error message 43. I tried to uninstall the drivers for this port and resettlement. Turned the monitor off tension and back, restarted the computer, nothing seems to work. If I plug my phone into the USB monitors I will load but no other service. If I plug the phone directly into the computers USB I get full access. Suggestions of Ant on how to get the monitors USB ports working entirely?

  Because the old 2007FP of 10 years does not have a Windows 10 INF driver for Windows 10 to recognize, the USB hub in the 2007FP are 'invisible' correctly Windows 10. There is not a fix for this. The 2007FP 10 years, has been validated only in Windows 2000/XP.

• Tecra M11-134 - Windows 7 USB ports problems

  I have three USB ports, that which is a SATA port.

  SATA port stopped working earlier, but I reinstalled it, after what it worked again.

  One of the USB ports however stopped working earlier, and am now unsure as to if this particular port doesn't show even in Device Manager (I see two entries "Generic USB Hubs", two "USB host controllers", a "USB unit (composed)" and two "USB root hubs"), but who is refers to the regular USB ports and that the SATA port?

  One of these entries in the USB port which does not or does not show this port?

  In any case, I can't get one of the ports to work even after reinstalling all USB ports.
  Can anyone help?

  I hope that someone with the same machine will describe the own experience with this, but what I want to know is follow:
  Have you tried to reinstall original Win7 32-bit professional and test functionality with the factory settings?
  >... even after reinstalling all USB ports
  Out of curiosity, but how you did it? Have you reinstalled the chipset driver?

• Before TC M700 and Windows 10 USB ports

  I have a TC M700 and can't seem to find the drivers for the USB 3.0 front ports on the chassis of the tower. I installed all the drivers for chipset, that I could find. There, someone had this problem?

  Run Windows 10 Enterprise 64-bit

  Thank you!

  Thank you for your response and suggestions.

  I opened the case and concluded that the cable connecting the front ports was not connected. It came out during the transport or has never been connected to the factory. I reconnected it the cable and everything works!

• After Windows Vista update, the usb port does not recognize the external hard drive

  My external hard drive still worked, but once I have updated Windows Vista USB Port do not see at all. Once I plug it into the laptop (HP Compaq) the port next to the port I plug the also work stoppages which is a usb mouse. Usually, when I have something plugged into the usb ports the laptop would also a sound signal which it does not.

  http://www.bleepingcomputer.com/tutorials/tutorial140.html

  Understand the Extras in Windows Vista and Windows Update info is at the link above.

   

  Remove the Vista updates; two ways to do this:

  1. a System Restore to before the updates:

  Click Start > programs > Accessories > system tools > System Restore > restore time/choose your own date > next

  If you use Norton, disable it before using the system restore.

  If it is impossible to enter the Normal Mode, do a Safe Mode system restore:

  Press F8 at the startup/power and the list of startup options, use THE ARROW key to select Safe mode > and then press ENTER.

  System restore steps according to the info above.

  Also:

  2. click on start > right click on computer > properties > Windows updates down the lower left corner > updates installed in the lower left corner in the next window

  > then click the one that you don't want > uninstall will appear at the top > uninstall it.

  ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~

  In addition, on the page where you clicked "Installed updates", click on change settings at the top left corner it

  > Change update settings in the next page of AutoUpdate to "check for updates but let me choose etc" > OK ".

  When you take a look at pending updates, you can either download/install them one at the time, namely the update causing you problems.

  > or if you do not need an individual > right-click on > UAC prompt > hide it

  See you soon.

  Mick Murphy - Microsoft partner

• USB Port driver problems

  Windows XP Professional will not recognize my key USB flash drive in the USB ports before; However, it does not recognize the flash drive in the back USB ports of the Tower pc which is very annoying. How can I get the drive J it is called on the front USB port of the tower to recognize my flash drive? I want so that it can detect the flash drive as soon as I insert it into the front USB port. In addition, the front USB does not detect my Ipod USB port or USB digital camera.

  Sometimes the front USB ports are not yet connected, so it's good to open the suitcase and check. Sometimes these ports on the motherboard just died, especially if the computer is old.

  Have the ports before does not work, is a very common problem that can have various reasons:

  http://www.Google.com/#hl=en&source=HP&q=front+USB+ports+not+working&AQ=0&AQI=G10&OQ=front+USB+por&FP=be5ffa94030d2d34

  Unfortunately, it will be difficult for someone who is not practical with the computer to help effectively. It's strictly a hardware problem and nothing to do with Windows.

  A good solution is to buy a USB hub (I prefer those motorized), attach it to a rear USB port, but do it right from the start where it provides additional ports are easily accessible. USB hubs are not terribly expensive, around $ 25-30 for a motor home. MS - MVP - Elephant Boy computers - don't panic!

• Drivers & USB ports not working not not on Satellite C660D-10f

  Hi recently put windows 7 on my laptop & have no ethernet controller drivers network controllers or
  allso none of my usb ports work
  I have access to another pc, but cannot transfer any drivers I need because of the usb ports?

  first of all can someone please tell me how to get ports working?
  Secondly should what drivers I install to put the laptop on the line?

  Thanks in advance :)

  Hello

  Its nice that you ask for help, BUT what laptop do you have exactly?

  PS: Why you n t use recovery disk to install the system?

• * USB ports and my printer problems

  My laptop is Windows Xp edition sp2 family.

  My old HP laptop computer of 4 years has 4 USB ports. Unfortunately, 3 of the 4 ports broke physically, so I only have a single functional port.

  A port that works cost of my cell. So I know it works. But now, only 40% of the time it will print when I plug my 750 HP printer all in one in it.

  Otherwise, it will display a "?" on the printer in the taskbar icon. Once, I unplugged the USB cable and plugged into the broken USB port holding it still and it actually print my papers.  But as I said I have been lucky that day cause these 3 ports are broken.

  What can I do to make the only port 1 have, can work for all devices I. It seems not only act with the printer.

  In addition, supplants ports broken something painful, costly or difficult to do? I know it can vary depending on the brand of the phone... But overall, it might be an easy solution?

  Thank you all in advance...

  Hello
   
  Method 1.
  Let us run the fixIt in the article below and check.
  http://support.Microsoft.com/kb/925196/en-us

  Method 2.
  Let us, remove and reinstall the usb controllers and check.
  To remove and reinstall all USB controllers, follow these steps:
  a. Click Start, click Run, type sysdm.cpl in the Open box and then click OK.
  b. click on the Hardware tab.
  c. click the Device Manager button.
  d. expand Bus USB controllers.
  e. right click on each device under the Bus USB controllers node and then click on uninstall to remove them one at a time.
  f. restart the computer and reinstall the USB controllers.
  g. plug in the removable USB storage device and perform a test to ensure that the problem is solved.
   
  Reference:
  Advanced troubleshooting tips for General USB problems in Windows XP
  http://support.Microsoft.com/kb/310575
  You can also download and install the dricers from the link below.
  http://h20000.www2.HP.com/bizsupport/TechSupport/ProductList.jsp?lang=en&cc=us&TaskID=135&prodSeriesId=295845&prodTypeId=18972

  It is an alternative to repair broken ports, you can purchase a usb hub, you can insert it in the usb port that works, and then use the available ports on the hub. Find out the nearest computer to usb hub store.

  I hope this helps.

  Thank you, and in what concerns:
  Shekhar S - Microsoft technical support.

  Visit our Microsoft answers feedback Forum and let us know what you think.
  If this post can help solve your problem, please click the 'Mark as answer' or 'Useful' at the top of this message. Marking a post as answer, or relatively useful, you help others find the answer more quickly.

• Broken USB port does not recognize mouse or iPod.

  Original title: Broken USB port.

  My usb port broke on my laptop and wheb I try to use my second port is not recognize my mouse or my ipon. Can someone please help

  Hello Lainyb,

  Disconnect all USB ports as the first.

  1. click on start and type: devmgmt.msc in the start search box and press on enter. Click on continue if your computer requests.

  2. in Device Manager, double-click Bus USB controllers, right click on the controller host, click on uninstall and click Ok.

  3. Repeat step 2 to remove all items under 'USB Bus controllers'.

  Restart your PC and Windows will reinstall all USB ports.
   
   
   
  Greetings,

  DummyArbiter010 (NL)

• N5902 Input Device works not when the Dongle is attached directly to the USB Port of the 3.0

  It's a big problem because the port only 2.0 on my Lenovo Yoga 700 is also used for charging and unless I'm on battery so I have to fix the dongle because otherwise the USB device is not recognized and I can't use my N5902 input device. Someone has an idea, a driver so I can install it manually? I use Windows 10.

  I managed to find a solution, I applied "Solution 2" of https://www.drivereasy.com/knowledge/fix-issue-after-upgrade-system-to-windows-10-usb-ports-don ' t - wor...

• device works on some usb ports

  My iPad has stopped working on the USB port in the front on my PC. It keeps connecting and disconnecting.

  It works fine when connected to a USB port on the back of the PC.

  In windows, each USB port has its own driver.  This is why you see the message "installing device drivers" in the notification area when the device is plugges on a unused usb port...

  How can I remove the driver for the iPad that is associated with tha front port so that the iPad is recognized properly by Windows?

  Thank you.

  Frédéric

  The problem could be that the bus from the front port has other pulling just enough power for
  make a difference or other hardware issues.

  If it is not material, these steps can help.

  ------------------

  
  References to Vista also apply to Windows 7.

  Follow these steps to remove corruption and missing/damaged file system repair or replacement.

  Start - type in the search box - find command top - RIGHT CLICK – RUN AS ADMIN

  sfc/scannow

  How to fix the system files of Windows 7 with the System File Checker
  http://www.SevenForums.com/tutorials/1538-SFC-SCANNOW-Command-System-File-Checker.html

  Then run checkdisk (chkdsk).

  How to run check disk in Windows 7
  http://www.SevenForums.com/tutorials/433-disk-check.html

  -----------------------------------------------

  Then lets refresh the USB stack

  Control the click Control Panel - Device Manager - no matter where in the box of white/white - then the VIEW - see the
  Devices disabled - look around (with the exception of USB controllers) for your devices (can have
  zero or more than one) and top - right click UNINSTALL.

  Control Panel right CLICK on EVERYTHING - Serial USB controllers - device configuration-manager and
  UNINSTALL all but the category itself - REBOOT - it refreshes the driver and battery USB

  This KB shows XP how to and methods of Vista and Windows 7 are the same
  http://support.Microsoft.com/kb/310575

  This is a utility to help you, but do 1 above.

  USBDeview is a small utility that lists all USB devices currently connected to your computer.
  as well as all USB devices that you previously used. Run Options and tick three 1
  are there choices to see if any.

  http://www.NirSoft.NET/utils/usb_devices_view.html

  You must remove all instances of the devices and restart.

  ----------------------------------------------

  If necessary try these two:

  Tips for solving problems of USB devices - and a Mr Fixit
  http://windowshelp.Microsoft.com/Windows/en-us/help/c39bd203-f729-47a4-8351-83291e13c8a81033.mspx#EGB

  Hardware devices not detected or not working - Mr. Fixit
  http://support.Microsoft.com/GP/hardware_device_problems

  I hope this helps.

  Rob Brown - Microsoft MVP<- profile="" -="" windows="" expert="" -="" consumer="" :="" bicycle="" -="" mark="" twain="" said="" it="">

• Equium A200-1V0 - USB ports power

  On Equium A200-1V0, there are two USB 2.0 ports, is there power 5V 0, common to the two ports or separated from 0, 5V powersuply for each port?

  Thank you

  500mA is a standard USB. All manufactured goods that create devices USB knew this and must follow the rules.
  If a USB port is not enough then the speaker manufacturer should include a USB cable to the two USB ports.

• Satellite A300 - USB port and fingerprints issue

  Hello

  I'm starting this thread that I have problems with my fingerprint reader and my USB port.

  I have a Toshiba Satellite A300-C01 laoptop. It was purchased in September of last year. I have not used it much except for the first week I had it, I've been away (Overseas), and I didn't take my laptop with me (I took a former I). There is no chance that the laptop has been used so that I was absent because I live alone and that the cell phone was simply sitting in the computer room.

  I started using it again about 3 weeks. Around a week ago, I noticed a pop-up (bottom left of the screen) telling me that a USB port had problems. I put my FlashDrive on the first USB port and at first, it was not recognized. I tried with another flash drive I have and who has been recognized. However, every time I start the computer I get who pop up telling me that there is a problem with the USB port.

  I also met a problem with the fingerprint reader. A pop up appears in the lower left side of the screen and say that the fingerprint reader was having problems. Happened since then that the problem with my USB port began to appear. About an hour ago, I checked the Device Manager and the fingerprints fingerprints/biometrics scanner does not appear in Device Manager.

  Has anyone else had this type of problem?

  What did you do to solve it?

  I would appreciate comments that I have no other choice at this time until Monday when the Toshiba support is available (they are available Monday to Friday).

  Thanks in advance,

  Deanne.

  First of all, you should try to update the chipset drivers and software of fingerprint. The two you can find on the Toshiba site:
  http://EU.computers.Toshiba-Europe.com-online decision-making supported Downloads & => Download drivers

  If it doesn't work you should try to update the BIOS. Check the Toshiba site for an update.

  In the worst case, you must reinstall the laptop with the Toshiba recovery disc. So you can make sure if it s a hardware issue or not.

• HP a6554f: Front USB Ports not working for a6554f

  Hi, I cleaned the dust from my computer yesterday for the first time because the computer kept crashing. I removed the motherboard, so I unplugged everything that was clinging to her and I also removed the hard drive then plugged everything once I had finished, (do not know if I just plugged in as it was, even if I took a video of it, but the wasen can't good quality so I had to guess a little). I also added thermal compound to the cpu.

  Anyway, everyhting seems to work except the 2 usb ports front of the case. It was working fine until I opened the case (this is why I do not open the computers, but the dust was just too). The audio ports and microphone located in the front work correctly. And the rear USB ports are working properly.

  What I've done so far is running pilot Booster and also I went to Device Manager > USB Bus controllers, then I turned off everything on the list, then allowed them again. And nothing has worked.

  I don't know much about computers so I don't want to go to the hassle of opening the case cause once again I was scared lol but could I maybe hooked up a cable in the port of fake?

  Also, is there a diagram to show where each cable goes to the a6554f model?

  As you pointed out the audio before and MIC ports are working, then it might be just the plug for the ports before USB is not properly or is in the wrong place.  Here is a page that relates to the motherboard. In the lower right corner of the image or the page layout scheme, there are two blocks header before normally taken into USB ports.  Says F_USB1 and F_USB2.  Either we must work to the front ports.  Check to make sure that the wiring box beam (which has the wires going to the front USB ports) is connected on one of them.