Camara photos do not show when plug into the computer's time a 2nd
If I plug my camara to the computer and show the image files and now when I plug it for the second time that the file showed that copy and the custom of photos to display at all in my computer or any other computer. who is wrong?
Does this have to do with Internet Explorer 9? In any case...
-brand and model of the camera;
-format of images, for example,. JPG or. NAVE;
-the version of Windows you are using.
There is usually a setting in the camera software on the PC that allows deletion of files on the camera after the files have been transferred. If you have not enabled then whenever you connect your camera, it will transfer all the files on the camera again.
In regards to pictures displayed, this may be due pictures in a raw owner who is not recognized by Windows 7, unless you install the codec from a specific manufacturer. Try making sure that your device is set to take the files. JPG or. Format JPEG as Windows will recognize these (or install the codec).
It is a very new problem for me. I had the iPad the same docking for the months and not had a problem. But now when I plug in, the iPad now tells me in the upper corner is it 'not supported' y at - it something I can do to fix this?
There seems to be something that is changed with iOS modified 10 power requirements for the load.
No idea when or if things will change, so all users can make use of the work load by plugging into the wall.
When my printer is not plugged, it is all set up and ready to print. But when I plug it into my laptop, the button just flashes, all other buttons are not on and the screen is blank as well as this, it is not picked up at all of my laptop.
If anyone has an idea why it continues to be please help! Thank you
Thank you for joining the HP Forums!
I understand that you get a white screen and the button flashes with your printer HP Deskjet 3632. I'm happy to help you!
Are you able to print a test page without the printer being connected to the computer?
Print a test page to make sure that the equipment is working properly.
Make sure that there is no US letter or A4 size, unused, plain paper in the input tray.
Press and hold the power button / , then press the Cancel button .
Release the button cancel, then the power button.
The test page will print.
Figure: Example of a test page
In the meantime, please take a look at this guide, the lights flash.
If you are unable to reach a resolution, please click on accept solution. If you appreciate my help, please click on the thumbs up icon. The two icons are below this post.
I hope hear from you soon!
Can Hiow I install a plugin of the mouse.
A standard USB mouse is supported natively by Windows itself and requires no driver work.
Simply plug waiting for 30 to 45 seconds, and it should work. This should work even for the wireless mouse.
My old iphone 6s is completely broken, it does not or registry that it is connected when plugged into a computer. I'm able to recover photos from the SIM card with an adapter USB SIM card or through any other way?
My old iphone 6s is completely broken, it does not or registry that it is connected when plugged into a computer. I'm able to recover photos from the SIM card with an adapter USB SIM card or through any other way? I also do not save anything with AllAccess, icloud, or through my computer as you would with a digital camera.
The photos are not stored on the sims, sorry.
You can always try the Recovery Mode, little to lose at this point. If it doesn't, I suggest taking it to an Apple Store for testing.
Turn off your iOS device.
Plug charge cable to the computer only (not to the device yet).
Open iTunes on your computer.
Hold the button to power on your device and do not let go.
Plug the cable into the device while keeping the power button.
Wait for the computer to detect the device and wait that he eat.
Restore as New first, then restore sauvegardΘ if you wish.
My iphone does not appear as a device in itunes when plugged into my computer, how can I solve this pls help
Msconfig does not start when typed into the starting box?
Original title: windows
What is the listed program in 'C:\Windows\System32' if you look in Windows Explorer?
If this is the case, it starts if you click on it?
Update your anti-virus software and run a full scan.
Then download, install, update and run a full scan with malwarebytesfree. (Keep free, no need to enter in any trial etc.).
Then run a sfc/scannow to see what that brings.
I have a Macbook Pro with a WD passport for mac that I keep all my photos on. I know that time machine will back up there if I plug it into the mac and select it to be excluded from the United Nations through the time machine preferences, which I did, but I generally keep the Passport plugged into the time machine itself and use wireless.
However, I don't really know if time machine is it backs up this way, or if it's just a wireless router that allows me to access the Passport.
How will I know if it is saved? And if not, how can I save it while it is plugged into the time machine?
Unfortunately, it seems as if you are confused about the terms of Time Machine and Time Capsule.
Time Machine is a software on your Mac, which is used to back up your Mac hard disk... like a Time Capsule
A Time Capsule is material... more precisely a wireless router with a built-in hard drive that can be used to store backups Time Machine .
With this information in mind, can clarify you what it is you want to do?
Hello! I have a MacBook Air (Early 2015) and when I load it, the plug that plugs into the laptop is very hot (I can barely touch). This only happens when I use the computer while I am it loads. When MacBook is in mode 'sleep' the plug only heat. Is this normal or something in my MacBook is broken?
Make sure it is well ventilated > use and maintenance your Apple MagSafe adapter - Apple Support
Hello. When I got the computer to wake from sleep or sleep, the computer brings me straight to the Windows session without asking for a login. There is no quick login screen. Any ideas on why that is? I put my plan options to be able to ask for a password on wake up in the control panel already.
Welcome to the community of Microsoft and thanks for posting the question. I've surely you will help find a solution on the issue.
I suggest you to read this article for more information
Missing in wake of his sleep - login screen requires hard stop
Hope this information helps. Please reply back with the State so that we can help you.
but the charges when it is connected to the power supply Anker. Using iOS 8 now. Tried to connect it to a laptop and PC, two different outlets, two different adapters Apple iPad, a car adapter, three different cables, and I get the same result. no load or no Flash. It seems to be a very slow load when it is connected to the power/computer Jack. The iPad acknowledges that the cable is connected but does not load properly. This started happening about 3 hours ago.
I spoke to Apple support, and the diagnosis showed that the battery was fine and not depleted and I had the old iOS. That could be what is causing the problem and if so... Why now? I can't upgrade to the new iOS until I reached 50% since it does not record it is plugged into an outlet.
In general, the load on the computer USB is slower that a wall jack - however in your case you indicated that even the outlet wasn't au. Well, if you can get the iPad to 50% and update the iOS - it is certainly useful to see if he can solve your problems. The other option would be to go back to iTunes and do a factory restore
I have a problem that has caused me a lot of irritation just because it seems so simple to fix, but Ive tried practically everything that I can think to do better and it has really improved.
I was skyping the other day and I took my headphones into the headphone. They have a microphone in them. When I plugged hide them in, I could hear the other person, but they could not hear me. It was the first time Id used for Skype, but still, something must happen in this brief moment of ruin.
So I did some research here and on google and I couldn't find much. The page here titled "Why slope my friend hear me on Skype" seemed to work correctly the first time, I followed his instructions, but to test it, I unplugged my helmet again. Once again, it fouling all upward. I even wrote the settings he was conducting (apple System Preferences) and Skype and when I put them in the way it was when it worked, it worked this time.
Just to be clear, I fixed it, but then to test it, I took out my helmet again and it has stopped working and even with the same settings, it will not work. It's extremely frustrating.
It will work when I plug my headphones into the audio jack, but then I can't out of my helmet, which defeats the purpose of having them.
My headset is not broken and my helmet is not broken because I can listen to music through my headphones and use my headset to call my friend on my helmet.
I feel that somehow, my helmet (which previously was transmitting my input headphone MIC perfectly) has become messed up somehow (I feel like there must be a setting or something that Im overlooking) and I just need to configure it to work at the time of entry and exit instead of having input/output divided between the helmet and the microphone port.
I hope this was clear enough. Please do not hesitate to ask me any questions that you may find useful.
I can't tell if it's a Skype problem or a problem of mac, but Im asking here just see what I can learn.
Thanks in advance
Too bad. I forgot the first rule to set anything on the computer: turn off and on. It works, but it seems absurd that something like that (what I think is something fairly common) would need to restart your computer.
I received an email from HP recommend I install new software for my Officejet Pro 8500. I downloaded the software and installed. The printer was working, but it would not scan. I got an error message telling me to re install the software because the analysis part has not been installed. I have downlaoded software again and installed it. During installation, the mode had to unplug the printer, so I did. (It is connected using the usb cable directly to the back of the computer). When installation instructions came at a certain time, it told me to plug the printer. I did, but it was not recognized. I checked the box to install all the software and install the printer later. Now is back, and the printer is still not recognized by the computer. Help, please.
What operating system you have installed on the computer?
Have you tried a new USB cable or a USB port on the computer?
I have a macbook pro 2012 middle and when plug my headphones in the headphone plug-in, and only the left earpiece works. Ive tried several types of headphones, all with the same result and then tried in my iPhone and they work fine. Any suggestions would be greatly appreciated!
The sound balance is set in the sound preferences, right (in the Middle, I mean).
I'm trying to sync music to my windows 10 PC on my iPhone 6 times and for some reason, the computer does not recognize the phone. What would cause that?
The steps detailed here to try to see if they help.
Maybe you are looking for
Hello We have a problem with nine Tecra S11 / Windows 7 64-bit. The CPU fan is noisy high speed during ignition and start Windows. No change after logon. Speed remains unchanged up to go to the sleep mode once. After waking up, everything is OK. For
Hi, my iphone 5s is overheating
Hello I have a satellite Pro L20 running xp pro. We use at the school, connected to a projector to display on the screen for children to see. the problem is that we use the Fn + F5 key on the laptop to scroll the screen option (two screens or not) bu
SOMEONE CAN ME SAY HOW RECOVER MY BLOCKED EMAIL ACCOUNT, IT HAS BEEN HACKED AND I CAN'T ACCESS IT. IT A STUF IMPORTANT ON IT. Thank you
Who downloaded Update for Windows 7 for 2011, switching on computer the first messge I receive is the entry point of procedure regarding the height etc etc and ending with OXCore.dll how we can remove this?