camera button does not properly

Similar Questions

• Compact Z5 camera away from the lock screen and the camera button does not work as well

  Don't know what that happen but the icon of the camera on the lock screen suddenly disappeared and camera quick launch button does not work as well. Can I still use the camera from apps however.

  Problem solved through launch quick adjustment of the device. However, didn't turn off in the first place. Hoping that this is just a small problem

• The ARC mouse left button does not properly

  The other day, I bought a mouse Arc.  My right button works fine, but my left button does not respond unless I have push down hard and hold the button for one second.   Simple click, it translates the button press then to click but nothing happens.  I guess it's just a bad mouse and not a systematic design problem?

  * original title - Arc 'hard click' buttons *.

  Hello

  · Do you remember the latest changes on the computer before the show?

  · What is the service pack installed?

  Try the steps listed in the link below: troubleshooting failures in the response to the mouse or wireless keyboard: http://support.microsoft.com/kb/838398

• Camera button does not

  Hi, from today, that the quick button for the camera does not work, also quick cover display camera (at the opening of phone) is not here more is there a way to fix?

  @xChaoscould you start in safe mode and check again?

  In addition, settings > apps > all > camera > clear data > restart the phone

  How to start safe mode

  How to boot mode safe on lollipop

• Simple button does not properly?

  The button works correctly, but for some reason when I run the flash page, the button looks with the alpha to 50%. I reduced to var elasticTween3:Tween = new Tween (my_box, "alpha", Strong.easeOut, 0.5, 1, 1, true);  line of code, but I need this line to fade the alpha of 50% to 100% when the mouse over occurs. Am I missing something?

  Here is my code:

  Import fl.transitions.Tween;

  Fl.transitions.easing import. *;

  Import fl.transitions.TweenEvent;

  import flash.events.MouseEvent;

  var myTween:Tween = new Tween (my_box, "alpha", Strong.easeOut, 1, 0.5, 1, true);

  myTween.stop ();

  var elasticTween1:Tween = new Tween (my_box, "x", Elastic.easeOut, 35, 45, 1.5, true);

  var elasticTween2:Tween = new Tween (my_box, "x", Elastic.easeOut, 45, 35, 1.5, true);

  elasticTween1.stop ();

  elasticTween2.stop ();

  my_btn.addEventListener (MouseEvent.MOUSE_OVER, hover);

  function hover (e:MouseEvent) {}

  myTween.start ();

  elasticTween1.start ();

  elasticTween2.start ();

  }

  var elasticTween3:Tween = new Tween (my_box, "alpha", Strong.easeOut, 0.5, 1, 1, true);

  elasticTween3.stop ();

  my_btn.addEventListener (MouseEvent.MOUSE_OUT, out);

  function on {(e:MouseEvent)}

  elasticTween3.start ();

  elasticTween1.start ();

  elasticTween2.start ();

  }

  Make sure that the code runs only once.  That is to say, this image should not be reinstated.  Use the trace() function to confirm, if you think that you have prevented the re-entry.

  :

  Import fl.transitions.Tween;

  Fl.transitions.easing import. *;

  Import fl.transitions.TweenEvent;

  import flash.events.MouseEvent;

  var myTween:Tween = new Tween (my_box, "alpha", Strong.easeOut, 1, 0.5, 1, true);

  myTween.stop ();

  var elasticTween1:Tween = new Tween (my_box, "x", Elastic.easeOut, 35, 45, 1.5, true);

  var elasticTween2:Tween = new Tween (my_box, "x", Elastic.easeOut, 45, 35, 1.5, true);

  elasticTween1.stop ();

  elasticTween2.stop ();

  my_btn.addEventListener (MouseEvent.MOUSE_OVER, hover);

  function hover (e:MouseEvent) {}

  myTween.start ();

  elasticTween1.start ();

  elasticTween2.start ();

  }

  var elasticTween3:Tween = new Tween (my_box, "alpha", Strong.easeOut, 0.5, 1, 1, true);

  elasticTween3.stop ();

  my_btn.addEventListener (MouseEvent.MOUSE_OUT, out);

  function on {(e:MouseEvent)}

  elasticTween3.start ();

  elasticTween1.start ();

  elasticTween2.start ();

  }

• Xperia Z3 camera button does not work.

  Hello.

  In my new Z3 I can't use the trigger aside.
  I can start the camera but, but doesn't take much photos when you press.
  It only flashes and makes a sound, without a store's image.

  Before attempting the repair of software, check camera settings if quick launch is enabled. In addition, there are 2 steps to take a photo: first focus and press a little more to shoot.

• button does not properly

  Hi all

  I created my first website. I managed to create a home page. On the home page is a key enter site, which once pressed begins the

  timeline... I have a layer of measures/labels that I write my code in. The number 'one' is my code below.

  Stop ();

  enter_site_btn.addEventListener (MouseEvent.CLICK, buttonClicked)

  function buttonClicked (event: MouseEvent): void

  {

  Play();

  }

  So far so good.

  Once I click the entry site of the screenplay scrolls along on my content page (label 2 in the actions/labels layer). This page has more buttons that will lead to different pages of the site: about, showreel, contact etc. I created these pages button symbols, and each has its own layer on the timeline.

  On the keyframe 93 where the second label is I put a stop (); action. The chronology ends here. I want to now click on one of my new buttons and the chronology of the Act, to this page. This is where I'm having a problem. I thought that I copy and paste the code for the button at the top and change the name of the button page_1, but when I test the movie is no longer stops on image one and runs through the end of the timeline with nonstop.

  I get a compilation error:

  
  

  Location Scene 1, Layer ' actions/labels', box 93, line 5

  Description 1021: duplicate function definition

  Source function buttonClicked (event: MouseEvent): void

  on the content page, my second home label, in line with the actions/labels, I used this code:

  Stop ();

  page_1_btn.addEventListener (MouseEvent.CLICK, buttonClicked)

  function buttonClicked (event: MouseEvent): void

  {

  Play();

  }

  See you soon,.

  Spaldo

  leave the code below unchanged:

  Stop ();

  enter_site_btn.addEventListener (MouseEvent.CLICK, buttonClicked)

  function buttonClicked (event: MouseEvent): void

  {

  Play();

  }

  .

  On the image key 93 where the second label is, join:

  Stop ();

  page_1_btn.addEventListener (MouseEvent.CLICK, buttonClicked)

• Volume up button does not work like the shutter of the camera

  I have an iPhone 5 with iOS 9.2.1 (13D 15). The volume up button does not work on it like a camera shutter. I think that it used for, and iPhone to my wife 6 with the same iOS version works fine. It is a problem, because I am using this phone with a stick of selfie, which triggers photos by simulating the volume press up button, so it doesn't work at all for me. The physical button works - I can control the volume with her settings. And when I try to use the stick selfie, I get the volume until the display on the phone, so I can see that the signal of the selfie stick is received correctly by the phone. And the stick of selfie works with my other phone that is not a problem with the volume up button.

  Work began after restarting the phone. So it's a bug to Apple report, the solution is to reboot the phone.

• Camera RAW does not display my Canon 5 d MK III properly files.

  Camera RAW does not display my Canon 5 d MK III properly files. I have version 9.3.1. The same file is correctly shown in Lightroom and when I open this file in Camera RAW in Photoshop the image appears correctly.

  Please watch

  Hi Theovanh,

  Could you please let me know what is the problem with images in Camera Raw.

  Also, please uncheck the option "use graphics processor" in Camera Raw preferences.

  Kind regards

  Tanuj

• Satellite A300-15J: touch button does not work properly from standby

  Recently I bought this laptop, works great except one problem...

  There is touchbutton for LED switching power.
  When I close or put the laptop in sleep, this button does not work like that but activates or disables the sound.

  I'm using Vista, I wonder if there is any patch or something for this problem.
  Thank you

  Andrew

  Can you please tell me if that happen after the day before, or after using the hibernation mode too?

• Buttons on the touch pad G505s does not properly in game?

  This is the second time I am posting this because of no response:

  I recently bought a Lenovo G505s about a month ago. Everything goes well with her until I downloaded Steam and downloaded games. 3 games I downloaded are snipers and therefore requires the left button of the mouse. But when I click it to shoot, he is sometimes unresponsive and is very laggy. This isn't the fault of the game, as I tried in different, but the problem is still there. I tried to change the round buttons (so that the right button is left to aim and shoot) and it works fine. I'd rather have the usual way around fact does anyone have a way to solve this problem? has this happened to you?

  If it is necessary here are some specs for the pc:

  AMD A8

  6 GB of ram

  WIndows 8.1

  also the buttons and trackpad works quite well with everything else except the game like Minecraft. It seems that when I move with WASD, the button does not work but the click of the button.

  Can someone give me an answer please?

  only, I have solved my problem. While randomly browsing settings for my PC, I stumbled upon the Windows mouse settings and it turns out that the time for clicks has been in the Middle, which explains the shift. I have this disables and problem solved without help of Lenovo at all. Lenovo support team good job

• Why not Firefox 4.0 back button does not work since the homepage or google search?

  I've just upgraded to firefox 4.0 tonight, and the back button is not working properly of my homepage or certain types of google searches.

  I can reproduce this problem every time by following these steps:

  (1) open a new tab, and I get a blank page.
  (2) select the Home button. I find myself at http://www.google.com/ig
  (3) go to the address bar type in a new URI, and press return

  Now, I leave my home page and go to the new page, but I can't go back to my home page.

  Similar behavior happens if I do a search on google for the address of quick search in the upper right.

  (1) start a new tab.
  (2) enter a search term and press enter
  3) click on one of the links to research and you transition to the new page, but the back button does not work.

  It works fine if I do something like:
  (1) open a new tab.
  (2) enter google.com in the address bar and press to enter.
  (3) do a GOOGLES search arae.
  4) click a search result link.

  This works very well for me.

  In my case, I turn off the Add McAfee SiteAdvisor 3.3.1 and the problem goes away.

• Camileo HD menu button does not work

  This msg is a continuation of a previous thread where my Camileo HD screen does not stay on.
  After connecting the camera to a TV screen where I could see, I discovered that the "menu" button does not work although other functions, such as zoom and replay works OK buttons.
  Do you know how to solve this problem?

  > This msg is a continuation of a previous thread where my Camileo HD screen does not stay on
  Why you open new thread so don t follow your first thread on this topic:
  http://forums.computers.Toshiba-Europe.com/forums//message.jspa?MessageID=189575

• Satellite A300D-158 illumination button does not work on Vista

  Buttons light Toshiba does not work under Vista.

  I installed added package versions available in Toshiba support page, but Toshiba Assist do not see the list of function buttons where I can change the feature keys.

  When this value added package is uninstalled all buttons works with WMP, but during the installation - do not.
  Illumination power button is not working do not by the press.

  This means support to toshiba button does not work properly with vista.

  I don't have these problems with XP

  Hello

  As far as I know, you can enable and disable the lighting in the BIOS.
  Go to BIOS and check if you can activate it.

  By the way; you said that buttons don t work with Vista.
  Have you tested this with Vista OS preinstalled Toshiba?

  You should do this!

• If the action button does not have my document?

  I scanned a document private on my printer using the iPad Printercontrol app, I wanted to send the document to myself, so I went into the menu files, selected the scanned document and instead press the arrow icon (share), I pressed the button share instead. Now, I don't know where the document has been "shared" at. Where exactly is he? I don't see all the settings as to where a document would be shared, whether it's on social media networks, that I have accounts or a location in my network.

  Hey CommandereON,

  I see that you use the PrinterControl application and analysis.  I'm guessing that you pressed the ' share' button at the bottom left of the screen when you try to share your emails.  I just tested this option and this button does not send the document from anywhere.  He shares the file outside the control application printer at the Gallery of the camera itself.  You use the button at the top right to share in places such as social networks and e-mail.

  Hope this helps to clarify your question,

  Jason