Camera connected DV Firewire/IEEE 1394 is not recognized - Qosmio F20

Similar Questions

• Firewire IEEE 1394 - lost installation Pulg-and - Play

  I have two firewire devices. A DV video camera and a 1 TB hard drive. Since the installation of the hard disk, I lost two of my Firewire IEEE 1394 connections.

  I tried:

  1 switch the DV camera and the hard drive, but the system does not detect the connection.

  2. I visited the Device Manager and checked the unit is activated and working properly.
  3. I'm sure the device driver is fully up-to-date.

  I have a Firewire connection on the front and the back of my PC, and both do not work.

  I am currently using my hard drive of 1 TB via a USB 2 port.

  Can anyone help

  See you soon

  Graham

  Hi Graham EF G,.

  To check the State current, the DV camera and the external hard drive not detected? The external hard drive has worked successfully before? Please also relay if there are error messages when you try to access the external drive.

  If devices are detected not below are some steps to solve the problem:

  You can check that both devices are compatible with Windows Vista by visiting the Windows Vista Compatibility Center, which includes a list of drivers, hardware and applications that are compatible with Windows Vista.

  For reference, the link to the Windows Vista Compatibility Center is included below:

  http://www.Microsoft.com/Windows/compatibility/

  Then, if the external hard drive is not detected in Device Manager, please check if the external drive is detected in the management of the computer:

  You can check this by going to: start then click on computer

  When it is connected and switched on, the drive should appear as a drive letter on the computer (ie: drive E:, F: or another letter.) An Autorun window may also appear if the drive is detected.

  If the external drive does not appear, please check the following:

  ·         Check the power supply and check if it works normally.

  ·         Check the wiring and confirm that your USB/Firewire cable is plugged into a port. You can also try a different USB or Firewire port.

  ·         Check disk management to see if the drive is detected it:

  1. right click on computer, select manage, select disk management.

  2. check the upper and lower windows to find if the drive is detected.

  If the external hard drive is not detected, try to connect the external drive to another PC to check if the unit is working normally.

  Then please check if Windows Vista Service Pack 1 is installed currently.  If WVSP1 is not installed, you can try to install this service pack and check if the problem still persists.

  For reference, the link below contains information. about how to obtain the latest Windows Vista service pack:

  http://support.Microsoft.com/kb/935791/

  If the problem is not resolved after the above steps, please see the link which includes a fix for the problem of an IEEE 1394 being more available device.

  http://support.Microsoft.com/kb/930495

  The relay please status after the above steps so that we will offer any additional assistance.

  Thank you

  Mary
  Microsoft Answers Support Engineer
  Visit our Microsoft answers feedback Forum and let us know what you think.

• HP HDX X18T eSATA - SPECIFICATIONS Firewire IEEE 1394

  I have difficulties to find specifications for eSATA and Firewire IEEE 1394.  I am looking for an external hard drive that has one or two of these connections.  Some have a selection of Firewire 400 or 800, and the list as IEEE 1394 Firewire specifications.  Granted that my laptop is 2009, but it is a workaholic.

  I have several Office Iomega esata drives, but I'm looking for a laptop.

  Thanks for your help,

  Ruth

  It is certainly the firewire 400 and eSATA will be SATA I speed. What else do you need help with?

• HP FireWire IEEE 1394

  I have a HP pavilion 6803w with windows 7. Can I use this card, HP FireWire IEEE 1394, for capturing from my Canon camera?

  Your HP a6803w expansion slot: 1 PCI Express x 16 slot for a graphics card, 2 PCI Express x 1 slots and 1 PCI slot... 1 slot PCIe x 1 used for the 56 K modem.

  That leaves 1 PCI slot or 1 slot PCIe x 1 for your Firewire card. According to the exact p/n of the HP Firewire card, it must fit into one or the other location.

  If your camcorder Canon provided with a Firewire cable and has a port Firewire/plug top then you'd be good to go.

  Frank

• How to connect a camera Digital Video through IEEE 1394 on my A50 port?

  Hello
  I tried to connect a video camera to my laptop SA50-109 through port IEEE 1394... but the laptop doesn't recognize any camera...
  Although the shows 'DV-in' camera when I plug the cable witch is DV (4-pin to 4-pin) cable...
  is there something I need to do before to make it work?
  any ideas... Please?

  Hi Isabelle,.

  I think that the normal login procedure is: -.

  1. connect the firewire cable to the camcorder.

  2. connect the other end to the laptop.

  3. turn on the camcorder (in play rather than camera mode).

  4. Windows will detect the camcorder and will make available as input source for your capture software.

  HTH

• Interface not found error when using Snap example for Firewire (IEEE 1394)

  Recently, I installed a SONY XCD-SX910 in interface with Labview 8.2.  When you choose the driver, only the Legacy driver would work for the installation of Firewire (R) (or IEEE 1394).  After installing the driver, I have images of the inteface to MAX.  However, when you attempt to trace through the example of Snap 1394 legacy since the document installation IEEE 1394, I get the error "Interface not found".  I tried a few iterations to try to name the camera as "cam0' (the name given to the camera to the MAX) and" cam0: SONY XCD-SX910.  However, the error continues.

  What should I name my camera so he could find the interface?  Will there be another underlying problem that is not obvious?

  Control of IO is not something that will be filled when you use the Legacy 1394 driver. If you use IMAQdx as your driver, it will fill. Thus, when you use the Legacy 1394 driver, you have control of the chain on your façade. When you use control of the chain, you must set the name of the camera as "cam0" as you did before. As long as this corresponds to what is able & Automation Explorer, you should be good as long as MAX uses the same driver that you are trying to use.

• Equium A100-299: the Firewire (IEEE 1394) port is not recognized

  I have a new A100299.
  It seems that the firewire port is not recognized. Y at - it software or a driver that is not installed? Or what can I do?

  Concerning
  U Molin

  Hello

  What do you mean with not recognized? Have you checked the Device Manager and there is a yellow exclamation point or what?

  To my knowledge the Windows XP uses own firewire drivers and you need t use the advantage drivers 3rd for activate the IEEE1394 port.

  As I said above, please check device manager if the port is listed correctly. If there is no yellow exclamation that everything has been installed correctly.

  By the way: you reinstall the OS?
  If yes how did you install it? Have you installed the chipset utility.

• Satellite M70 (PSM71E) Firewire / IEEE 1394 Device number

  I recently bought an Iomega eGo 250 GB Portable Hard Drive with USB 2.0 connections and Firewire 400.

  The Firewire port on the drive's type 6 pins. My Satellite M70 notebook computer has a Firewire 4 socket pins on the left side. I have an external power supply for the reader of the eGo. When I connect it to my laptop using a cable Firewire 4 pin 6 pin is not recognized. Nothing happens at all. I tried to disable the IEEE 1394 network adapter and reboot of Windows XP Home Edition with no luck. This drive connects and works very well using the USB cable, but I prefer using Firewire. The reader connects and works very well using the Firewire cable 6-pin 6-pin on my PC at home.

  Is there something I need to do to make the drive work using the Firewire port? I have no other Firewire devices to test the port with.

  Any help would be appreciated!

  Maybe the cable is defective? Is it the cable supplied with the HARD drive or did you buy it separately?

  You can buy more 6-pin to 4-pin adapter online. Google "firewire 6-pin to 4-pin adapter.

• question about firewire ieee 1394 via chip.

  I have a hp pavilion a705w, missing a chip called "via vt6307" I see online is for ieee 1394, if I use not any device with a firewire port to this computer if they have problems or be less safe, or that make a difference, the chip has disappeared from the motherboard.

  Hi vilig,

  It is a design of single chip with full "plug and play" capabilities for integration in PC systems and electronic public, equipped with an interface HCI open and logical functions initialization and bus arbitration.

  Flexibility
  Has 2 ports supporting transmission rates up to 400 Mbps, allowing the use of multiple devices broadband simultaneously.

  If the chip is placed on the motherboard, it would be preferable that you contact the manufacturer for help on this issue.

• Uninstalled Cisco Connect to the router password now not recognized

  I uninstalled Cisco Connect and now I can't connect to my wifi router.  The password is not recognized.  Do I have to reset the router as a whole?

  Reset would do the trick.

• Satellite A30 921: XP does not detect the Firewire IEEE 1394 port

  I have a satellite A30 921.
  There I link port aswell. My problem is that im trying to connect my camcorder dv via I LINK and this is the first time since I bought this laptop. But XP won't dectecting it.

  Can someone help me on this problem?

  Hmm, it seems that the satellite A30 921 supports really 4pol IEEE1334 Firewire/iLink interface. Therefore, it should be possible to connect your external camcorder without big problems.

  May I ask if you are using Win XP with SP2 preinstalled?
  You should do it.

  AFAIK the SP2 contains a bug which has affected the firewire port.
  But it has been resolved with the additional patch. Check this box:

  + * Performance of 1394 devices may decrease after you install Windows XP Service Pack 2 * +.
  http://support.Microsoft.com/kb/885222

  I also recommend to check the firewire port in Device Manager.
  It would be desirable to remove it from the list of Device Manager, then restart the laptop for reinstalling the port once more.

  Welcome them

• SatProA60 XP SP2 removes device firewire iEEE 1394 after standby

  I have an external dvd writer 1394 IEEE USB2.0 (LG GSA 5163D) with my Satellite Pro A60 and discovered a problem very embarrassing when the computer comes out of standby the dvd burner is removed by the system. IF I have it plugged into the USB port everything is OK.

  I have the latest BIOS installed 1.9 B
  Does anyone know a fix for this problem?
  Is this a Microsoft problem?

  Thank you

  John Newman

  Hello John

  It is really not easy to tell exactly what is happening, but the fact is that Toshiba don t need driver iEEE as the iEEE port is recognized and installed by the operating system. Any kind of fix is unknown to me.

• Belkin Firewire-IEEE 1394

  It's a long story! This is my 3rd Windows re - install after problems with Windows updates.

  After the second installation of service packs2 to my Firewire driver disappeared. Windows then crashed. I reinstalled windows once, all updates have been installed, and now I want to connect my video camera.

  Is it safe to try again? I can't to traverse a full Windows reinstall again.

  Desperate!

  Hi emily_elizabeth,

  First of all, make sure that the thread of the camera or a fire is compatible with Windows vista by using the Compatibility Center.

  http://www.Microsoft.com/Windows/compatibility/Windows-Vista/

  Also, make sure that you have installed the updated drivers for the video camera on the manufacturer's Web site and check the device manual for installation instructions.

  Import video from a videotape
  http://Windows.Microsoft.com/en-us/Windows-Vista/import-video-from-a-videotape

  I hope this helps!

  Halima S - Microsoft technical support.
  Visit our Microsoft answers feedback Forum and let us know what you think.

• Satellite P10: Controller USB and IEEE 1394 do not work after WXP re - install

  Does anyone know how to fix this problem?

  I recently reinstalled WXP home on my satellite p10 computer laptop and then installed all drivers and utilities from the support CD that follows with Notepad.

  Everything works except for USB and Firewire.
  Very strange screen system shows me that I have bad driver for usb controller, but when I run the utility chipset problem remains. I even downloaded the drivers on the Toshiba support home page in the hope that it would be a different version and they would work, but nada... same problem persists.

  Someone knows how to solve this problem, or what is suitable driver for the controller USB on satellite p10 554 and where can I find this driver (without the entire chipset utility?)

  Thank you in advance for your help!
  David

  Hello

  the funny thing is that USB is IN the chipset. The problem is that you can extract some drivers you need, given that utilities chipset intel are a complete set.

  So, I suggest you go to the website of intel (www.intel.com) and then download the chipset utility. Don t forget to update your windows (Service pack, updates, bugfixes) because the operating system has sometimes problems with the hardware installed, then an update will solve this...

  I hope that you have little luck with the original software of the chipset intel.
  Give a few comments after completing the makings and let us know if it worked.

  Good bye

• Chromebook C720 - no mobile internet connection with my usb dongle - even not recognized.

  Hello

  Your help please. I use an Acer C720 Chromebook bought in England but I am now at the Brazil and I can't access my mobile data plan - the operator is TIM and the dongle is Olivetti, Olicard 160. I can access the WiFi from the nearby square, but this means I have to perch on the edge of 3 inches from my room window, is not comfortable. I have an Acer Aspire One D255 with me as a return to the top (good job, I) and it uses the same USB dongle without any problems - but in 3 years much more slow and clumsy as the chromebbok for inernet - but it works. Back to my problem, why when I plug the USB to TIM with SIM in my Chromebook C720, is it not recognised? All opinions more welcome, because I'd use this Chromebook sitting at my table, if possible to the Brazil! Thank you very much, Baldocci - a semi luddite.

  Not a lot of support for this kind of material in Chromebooks. I've heard more support cell adapter is coming, but I've heard that for a while. Many even dongles are not working with Mac so your best option is a personal mobile device, MyFi. In this way, you can connect your Chromebook through the WiFi of this adapter part.