Camera FireWire not recognized unless you turn on after pc started.

If my Firewire camera is lit in front of my pc, then it does not get recognized in windows XP pro unless I turn the camera off then on again. Any ideas? I tried this on 2 different pc running windows XP pro sp3.

Once recognized, can I switch the camera on and off as many times I want and the pc still recognizes. It's only a problem when turned on before the pc started.

Any ideas?
Thank you

Hello
I have the latest drivers installed. I contacted the manufacturer of the camera and they made sure that I got the last.

I found another pc, I tried the camera on had no such problem, so guessed it was down to my hardware.

To make life simpler, I have attached a firewire hub to my pc to save me from climbing under my desk whenever I started. This seems to have solved the problem! I have to unplug my camera to get my pc to post it since!

See you soon

Tags: Windows

Similar Questions

  • my camera is not recognized when you try to shoot teathered into lightroom, I spin el capitan, someone knows how to solve this problem

    my camera is not recognized when you try to shoot teathered into lightroom, I spin el capitan, someone knows how to solve this problem

    Return to the previous MAC OS until it's resolved.

    Lightroom and El Capitan | Mac OS 10.11

  • my keyboard strokes are not made, unless you type very slowly and hold down the key until the particular letter is displayed

    my keyboard strokes are not made, unless you type very slowly and hold down the key until the particular letter is displayed

    Hi Kdooley,

    Are a. When you facing this problem?

    B. using a laptop or a desktop computer?

    C. is - what happens with specific applications?

    D. don't you plug a different keyboard to check?

    Method 1

    I suggest you to connect this keyboard on another computer and see if it even. If the problem persists, try Method 2

    Method 2

    Try to change the rate of repeat on the keyboard and check if it helps.

    1. Open keyboard by clicking the Start button, clicking on Control Panel, hardware and sound, tap keyboard.
    2. Under character repeat, move the repeat rate slider to the left to keyboard characters repeat more slowly, or to the right to make them repeat faster.

    http://Windows.Microsoft.com/en-us/Windows-Vista/change-keyboard-settings

    If the problem persists, then it might be a problem with the keyboard itself.

    Kind regards
    Bindu S - Microsoft Support
    Visit our Microsoft answers feedback Forum and let us know what you think

  • Devices not recognized unless it is connected through a USB expansion port

    Came to use a scanner that was not used for some time and unrecognized device.  Tried reloading drivers, but still no good. Bought the new scanner/printer combo, but not recognized after loading software.  Finally managed to make it work via WiFi. Thought, I'd better try another material... iPOD touch... "unrecognized ', Sony e-raeder..." not recognized '... panic!  Has finally got the devices to be recognized by the connection via an expansion Belkin 4 port hub.  Any ideas on how to solve the problem of USB ports not recognize my hardware when connected directly.

    Have you tried to update the drivers from the chipset manufacturer of PC or motherboard manufacturers websites?

  • Disc not recognized when you try to install a program

    OP: try to install the program

    try to install the program "Family TreeMaker" and cd/dvd-rom does not recognize the disc. I tried to type in setup.exe at the beginning and still can not get the computer to recognize that there is a program disk in drive E:. It just keeps wanting to "burn" on a CD. What can I do? I tried to go to the Control Panel, tried to restart the computer with the disk in the drive. I have Vista home edition,

    Hello dragonfly1814,

    If the drive is not recognized, try and check if the drive works on another computer. If the computer still does not recognize the drive, the best idea would be to contact the manufacturer or seller to obtain a replacement CD-ROM.

    Thank you
    Irfan H, Engineer Support Microsoft Answers. Visit ourMicrosoft answers feedback Forum and let us know what you think.

  • my keys do not touch unless you hit hard

    key strokes do not respond unless I hit everyone very slow and difficult. Is there a sensativity to keyboard setting in the menu of my phone?

    Check in the Control Panel (large or small icons |) Keyboard. Nor (Dells) laptops in my House have a sensitivity of the keyboard setting, but it's worth a glance.

    Is this a new laptop and the keys have always been difficult to support on? Or have you gradually to support stronger over time?

    If this is a new machine and still under warranty, and you believe that there may be something wrong with the keyboard ("very slow and difficult" are difficult to really feel in a forum), I suggest you contact the support site of the manufacturer that there could be a defect or one of the layers under the keys can have slightly shifted. And if you're like me, the day after the expiration of the warranty the device will die; )

    Computer manufacturers
     http://Windows.Microsoft.com/en-us/Windows/help/contact-support/computer-manufacturers

    If the laptop is not under warranty and you think he needs repair, contact a local reputed store with mobile experience (please do not go for the geeks of the supermarket brand, ask friends and co-workers for recommendations) and ask about the costs of repair/replacement. It the machine is too old to find replacement/keyboard parts can be difficult.

    The below page will give you an idea of the inside of the keyboard:

    How to disassemble the laptop keyboard
     http://www.laptoprepair101.com/laptop/2009/12/05/How-to-disassemble-laptop-keyboard/

    Kind regards

  • ORA-01821: date format not recognized when you use the format TSH:TZM model

    Hi all

    Running on the Oracle 11 g Enterprise Edition Release 11.2.0.2.0 - 64 bit Production database

    I guess I am missing something here... but the following SQL code raises the exception ORA-01821.

    SELECT to_char(CAST(to_timestamp(SYSDATE) AS TIMESTAMP WITH LOCAL TIME ZONE),'YYYY-MM-DD"T"HH24:MI:SSTZH:TZM') as date_updated FROM DUAL;
    

    ORA-01821: date format not recognized

    01821 00000 - "date format not recognized".

    * Cause:

    * Action:

    If I change the model of TZDS or TZR time zone format... This works.

    SELECT to_char(CAST(to_timestamp(SYSDATE) AS TIMESTAMP WITH LOCAL TIME ZONE),'YYYY-MM-DD"T"HH24:MI:SSTZD') as date_updated FROM DUAL;
    

    2013-09 - 04T 13: 24:16EDT

    I need to format a date in a date in the correct format with time zone for an Atom (RFC3339) feed

    for example. 2013-09 - 04T 14: 11:09 - 05:00

    I do not know why the TZH:TZM triggers the error...

    Database NLS settings have anything to do with it?

    NLS_TIME_FORMAT = HH.MI. SSXFF AM

    NLS_TIMESTAMP_FORMAT = DD-MON-RR HH.MI. SSXFF AM

    NLS_TIME_TZ_FORMAT = HH.MI. SSXFF AM TZR

    NLS_TIMESTAMP_TZ_FORMAT = DD-MON-RR HH.MI. SSXFF AM TZR

    Thanks for the help

    If you want to change the display format, can you use to_char with the expected format

    SELECT to_char (TO_TIMESTAMP_TZ (to_char (sysdate,' YYYY-MM-DD HH), "YYYY-MM-DD HH:MI:SSTZH:TZM"), "YYYY-MM-DD"T"HH:MI:SSTZH:TZM") t1d FROM DUAL;

  • 3.0.98 (2.1) camera problem: not shown on the big screen after taking photo

    It's strange to me that no one has noticed this earlier. Here's what's happening. When I take a picture, after the message "Capture."... "on the screen that will briefly dark, unlike in 1.5 (or any other phone or camera non-telephone), it is no more that 3-4 seconds while you can see the last picture taken. The captured image will immediately in the small tile in the corner of the screen. Whereas, on the backflip (even with the review of photo 1, 5), the last photo you see and the image that is actually taken can be very different, I see this as potentially troublesome for users. It is if they need to click on the thumbnail of each time they want to check if the picture is good because the thumbnail does not provide any information on sharpness.

    Someone else can also try to take a picture and check if this is the case for all phone?

    Not confirmed - there is no setting to photo review in camera and the photo taken just does not control when you take a picture.

    Edit: just looked at my original phone and it doesn't have a framework of control of the image, it just makes.

    I know that when I use my digital camera still disable the functionality of review when I need take snapshots of back to back quickly. A setting to turn this power would provide the best user experience.

  • Camera GE not recognized Vista

    I can't get my vista based system to recognize my camera GE A1250 digital camera via usb conn. The camera is recognized on my computer laptop windows 7. Is there a driver that I need and how do I get it?

    Contact the manufacturer: GE.

    Look for a section drivers and downloads on their Web site.

    See you soon. Mick Murphy - Microsoft partner

  • MINI DV-D016H car Keychain camera usb not recognized because it has detected a malfunction

    I bought this camera Keychain car MINI DV-D016H. When I connect it to the laptop which uses Windows 7 home premium, it says the USB device does not recognize by windows because it has detected a malfunction. What can I do? What can I do to continue using this device with the laptop?

    Hello

    -You are aware of any changes made on the computer before this problem?
    -Have you tried it on another computer?
    -How are you trying to connect the device to the computer?
     
    Method 1: Run the Microsoft FIXIT from the link below, and if that helps.
    Hardware devices do not work or are not detected in Windows
     
    Method 2: Run the troubleshooting utility from the link below and check if the problem persists.
    Open the hardware and devices Troubleshooter
     
    Hope this information helps.
  • Maxtor OneTouch II 300 GB external hard drive USB/FireWire not recognized by the computer

    Title: Maxtor OneTouch II 300 GB USB/FireWire external hard drive of origin

    I found my old external hard drive and I wanted to access some old photos. Since I bought the drive, I have upgraded to Windows 7. Windows does not see the hard drive after updating the usb drivers. I look in the tab of the computer and no hard drive. I looked in disk management and I see it but it won't initialize. Shows the error, and that's all... HELP!!!!!!!!!!!!!!!!!

    Hello


    1. have you checked if the external drive is detected on another computer?
    2. What is the exact error message you get when the task fails?
     
    To work with the issue, check out the following link.

    My drive does not appear in Windows Explorer

    Check if it helps.
  • My FE - 370 camera is not recognized in Windows.

    FE - 370 camera

    I don't have a disc with my camera. When I plug it to the computer, the screen of the device lights up, there is a noise of 'knocking' of the computer, I press OK. the display shows "wait a moment" - and nothing happens! Help!

    I don't have a disc with my camera. When I plug it to the computer, the screen of the device lights up, there is a noise of 'knocking' of the computer, I press OK. the display shows "wait a moment" - and nothing happens! Help!

    So, in fact, you have a digital camera Olympus FE-370?

    It is not * really * compatible (Olympus can't in fact) under Windows 7.

    It has a removable memory though - I suggest that you get a compatible drive and simply start to remove the card and use it as an external drive when you want pictures.

  • Zoom camera Q4 not recognized as 'on '.

    Any suggestions? It appears as a choice in the express video options menu, but when that the camera is turned on there is no live stream. Works well with Skype and other etc web cam software

    Presenter works very well with the Logitech webcam alternative that I have that id like to get the Q4 to work!

    I tested today the Q4 with a completely different PC and Adobe Presenter software - it will NOT work as a webcam with this software.

    NEEDLESS TO SAY, THERE WAS ZERO LINE FROM ADOBE ON THIS PROBLEM.

  • An 8GB SD HC card that I bought for my camera is not recognized by Win XP SP3.

    I downloaded an update of Windows, informed me that it wouldn't load because I already had the necessary software through my SP3 update.  The new 8 GB card is recognized on a Windows 7 computer.   My XP computer recognizes 2 GB and smaller SD cards.

    Thank you.

    You need a player who is able to read SDHC cards: http://www.google.com/#hl=en&xhr=t&q=sdhc+card+reader

  • HP Color Laserjet 4700n does not print unless you press the button "Refresh" on the printer...

    Hello

    Trying to support a printer down in our Australian Branch, so I can't see the printer, what users say just.  This problem occurs for everyone down in this office (about 20 users).

    It is connect via LAN to everyone and it does not seem printer for everyone until they go up to the printer and press the button "Refresh" on the printer itself.  It's a HP 4700n color jaserjet printer.  I got them to recycle the power on the printer leave unplugged for about 5 minutes and also tried to reset service print spooler on a user's computer and the server, but none of these options helped.  I also tried to remove and time the printer to a computer to users, but that did not help either.

    Any suggestions?

    Thank you!

    Hi, thanks to send additional information.  It really helped.

    The following is taken from the User Guide which can be found here:

    http://h20000.www2.hp.com/bizsupport/TechSupport/CoreRedirect.jsp?redirectReason=DocIndexPDF&prodSeriesId=473038&targetPage=http%3A%2F%2Fbizsupport1.austin.hp.com%2Fbc%2Fdocs%2Fsupport%2FSupportManual%2Fc00366053%2Fc00366053.pdf

    The message that users see is a Media fast charge.

    On Page 198, there is a section on the message they see.  It also includes measures to address the message.

    It is likely that the tray is already loaded with media of the letter otherwise, they would get another error after pressing the button to check twice.  However, media guides are very likely out of position and causing the printer to think that the letter is not loaded.

    For step 2 to verify the media guides see page 97: "setting up trays of food.

    When you load paper into tray 2 and have the media guides correctly aligned, after the closing of the tray of the printer, you should see a prompt saying that plain letter was loaded in tray 2.  This prompt is to change the type, size is automatically detected by the tray.  You see a different size than the letter when the tray is closed, which means that the guides are not good position and should be adjusted.

    You can also check which think that the printer is loaded by accessing the paper handling menu as described on page 98.

    Once you have the printer thinking that plain letter is installed in tray 2, the jobs of users requesting letter tray 2 should not more the prompt.

    What happens if you check that the guides are in the right position, but you don't always get a letter in the status bar?  It is an indication that the size of detection does not work correctly.

    Check the guide position tray holder should solve the problem. It may have been moved from its position when the new document has been loaded.  If this does not resolve the problem, please after return.  Let me know the size of the media and type that the printer thinks is in tray 2, the driver that you are using as well as the driver for the work of the user settings.  This will allow me to try additional things at the office.

    (Edited to remove extra lines)

Maybe you are looking for