Camera memory card does not work in the computer

Until today, I inserted 2 cameras memory cards in the drive of Dell computer and they worked very well. Today, they do not. I use Windows 7. Any suggestions?

Memory cards are frequently blur when windows write process fails to complete properly, causing incomplete information to write in the card.

It is a question of the computer, you see not no map at all, or he sees the card but you said it must be formatted before you can proceed?

Tags: Windows

Similar Questions

  • ATI Radeon HD 4600 Series AGP Grapics card does not work since the installation of service pack of windows 7

    ATI Radeon HD 4600 Series AGP Grapics card does not work since the installation of service windows 7 pack has worked before

    Is not fully compatible with win7, some patches are available from ATI

    http://support.AMD.com/us/KbArticles/pages/CatalystAGPHotfix.aspx

  • Graphics card does not work on the Satellite L850 PSKFWA

    Hello

    I have a Satellite XC 250895 Q. Windows 8 keeps giving me a message that my graphics card does not work correctly.
    I go to the Radeon website and click on the appropriate boxes and let Radeon check my system to see if the drivers are up to date. He tells me that I have to download something (?) New driver) but when I do it tells me there is a problem with the compatibility with my system.

    I haven't noticed any problem with the graphics.
    It may be a Radeon problem, but what I have on my system, which was installed at the factory.

    Thanks for everything back
    Hetty

    + The message was edited: model nr. Add the object +.

    Can you please tell us once more what model of laptop you have exactly?
    Are you using the original Win8 preinstalled?

  • 128 - GB MicroSD card does not work with the new Clip +.

    My old Clip + (black, 8 GB) was getting very long in the tooth, so I ordered a replacement off Amazon.  As far as I know, it is identical to the old, but a very unpleasant difference is presented - it does not work with the MicroSD card which has been a huge part of why I got a Sansa at all.  He acknowledges, but after a media updated I'm lucky if more than one album appears.  And that's what's so crazy!  You just blow through the update in a few seconds, and when I navigate on the map, there is nothing or a handful of albums random, orphaned.  That's happened?  I updated the new Clip + for the current firmware (as I had done with previous); I made sure to reproduce all the parameters that I would be put in place before--I can't imagine what could be the cause!

    Treats quick closing:

    The card is formatted in FAT32 with the same sector size in storage aboard the player (32 768 bytes).

    A 64 GB card format works even without any problem.

    I tried to update the media in MTP and MSC mode; the problem is the same in both.

    There is ample space for MTABLE. SYS - I have not yet loaded all the music on the Clip + itself.

    Rockbox plays the card without problem, but the sound quality is horrible (at least on this player; I'm sure that other versions sound best), and its interface is a headache.  No thanks.

    HM.  Looks like to run CHKDSK /F on the map the problem resolved!

  • Memory card does not work on my Satellite L305D-s5893

    Hello

    I reinstalled the operating system and downloaded the drivers from Toshiba s drivers page, the only driver (I thought) doesn't you work the card reader.
    I put an SD card in the card reader, but the OS does not read anything.
    Is there another drive for the card reader, or maybe the card reader does not work?
    How do I know this?

    Hello.

    If you can not use the driver from Toshiba, it is without doubt that the pilot is not suitbable for you. Toshiba has a lot of brands for Satellite L305, you may need to look at the correct driver for your model. From my experience, apart from the value Pack provided by Toshiba, I'll use Windows Vista update to find the most recent and correct drivers and download driver GP of supplier of the graphics card for my laptop after each new installation.

    Hope this can be your answer.

    Kind regards.

  • GADMEI USB TV Tuner card does not work on the new Windows 7 computer

    Original title: usb tv card is not supported in windows 7 x 64

    Hello

    I have new office... everything works fine, the problem is with my tv usb card.

    I tried gadmei model utv882e and utv332e... no one works with my office... but in my laptop with the same version of windows, two tv cards works very well.

    I have no other problems in my pc or tv... cards all drivers are up to date.

    Here is my desktop specs:

    model of motherboard is asus b85m-k

    Hello Faysal,

    Thank you for visiting Microsoft Community.

    As described in the question, I understand that your two cards of Gadmei USB TV Tuner does not work on your Windows 7 desktop. The same card works fine on another computer in Windows 7 with the same configuration.

    I would be grateful if you can provide us with the following information to help us better understand the issue.

    1. What happens when you plug-in card TV Tuner? Your computer will detect the device? Do you have a code or a message when it fails to connect?
    2. Did you check connecting them via a different USB port?

    There may be a possibility that drivers for Gadmei TV sticks are not correctly installed on the computer. We will try these methods below and check if that helps.

    Method 1:

    First of all, I suggest you to run the following Microsoft Fixit to get the problem diagnosed and fixed automatically.

    Hardware devices do not work or are not detected in Windows

    http://Support2.Microsoft.com/mats/hardware_device_problems?WA=wsignin1.0

    Method 2:

    If the fixit above does not resolve the problem, I suggest to download the best compatible driver on the device manufacturer (Gadmei) site or contact Gadmei to get the best driver for your computer and install it.

    You can also read the article below to help update the device driver.

    Updated a hardware driver that is not working properly
    http://Windows.Microsoft.com/en-in/Windows7/update-a-driver-for-hardware-that-isn ' t-work correctly

    I hope this helps. Please let us know the results. Do not hesitate to write back for any further assistance with Windows, we will be happy to help you.

  • wifi card does not work (asus laptop computer x53e)

    Hello

    I have laptop asus x53e sx1444v with Wi - Fi card inside. It was running Windows 7 Home Premium, but something was wrong with the system, so I reinstalled it completely. After you have installed all the drivers and updates from Asus, I discovered, that the wifi does not work. I tried all the drivers on the Asus Web sites, but nothing works. In Device Manager, it is listed as a network controller, but it is listed as unknown device. If I try to install the driver, it is listed as network card, as it is, but it has the error code 10 (this device cannot start).
    When I started to live linux, the wifi adapter works withnout any problems.
    The wireless card is intel 11230bnhmw (more info printscreened http://ctrlv.cz/mJMd here). I searched for the drivers but still nothing works listed as network controller.
    I tried to put the card and plug it into another of the HP laptop, it works in linux, but the same problem under windows.
    What should I do to make it work on Windows?
    Thank you.
    (Sorry for my bad English)

    I decided to change my OS, now I am running windows 8.1 and wifi card is working automatically, withnout need to install any driver.

  • Windows 7 Aero does not work after the computer and Lync 2010 screen sharing session force shutdown

    Hi guys,.

    I can't activate Aero, my theme is stuck on Basic after that I got a power issue and forced stop running Lync 2010 screen sharing (this disables Aero but it turns on when the sharing is stopped).

    I'm running Windows 7 Ultimate x 64 on a workstation with the following specifications:

    CPU: AMD Phenom II X 4 955

    RAM: 16GB DDR3 Corsair

    GPU: nVidia GTS 450 (1 GB of GDDR5 memory)

    My Windows experience index is 5.9 (determined by HDD SATAII, the rest scores are higher than 7).

    Troubleshooting I executed before writing these lines:

    • Updated my nVidia drivers
    • Checked the themes and DWM Session Manager services, both started, both the Auto value
    • Ran the store built, the problem cannot be resolved
    • Running the Wizard Microsoft Fix It, he pointed out that my graphics card does not support Aero Glass

    So the GPU is not the problem, I've been running Aero until this problem has occurred.

    Any ideas?

    Thank you!

    Hello

    It is better suited for the IT Pro TechNet public. Please post your question in the TechNet Forum.

    You can follow the link to your question:

    The customers TechNet Lync and devices Forum

    http://social.technet.Microsoft.com/forums/en-us/ocsclients/threads

  • My password does not work and the computer won't let me? What caused this and how to fix it?

    Friday when I signed up computer turned off, everything worked very well. Today it lit, and all of a sudden my password does not work. I had the computer about two years and everything was fine with the same password. Someone might have tried to sign without the correct password - would he have it? I don't know what to do, but must enter into the system! Any sugguestions?

    Friday when I signed up computer turned off, everything worked very well. Today it lit, and all of a sudden my password does not work. I had the computer about two years and everything was fine with the same password. Someone might have tried to sign without the correct password - would he have it? I don't know what to do, but must enter into the system! Any sugguestions?

    If you have a Vista DVD, please use this tutorial from Microsoft Support:
    http://support.Microsoft.com/kb/940765/en-us

    Here's another same tutorial, but from another source;
    How to regain access to your administrator account tutorial link For the benefits of others looking for answers, please mark as answer suggestion if it solves your problem.

  • Printing & working copy, but savings from the memory card does not work

    Photosmart Prem C310 printer with current driver and firmware

    Wireless connection

    PC is Windows 7

    When I try to record from memory card to the PC I get the message, «!» No set up.  You must install the software for the device. "on the touch screen of the printer.  What Miss me?

    Hi LZimmerman,

    Follow these steps to map the card reader

    1. Insert the memory card into the printer
    2. open my computer
    3. click on network drive mapping
    4 Select the letter of the drive you want and enter the folder \\192.168.1.101\memory_card

    Note: replace the 192.168.1.101 with the IP address assigned to your printer.
    5. click on finish, and the Player opens for access to the files

  • Satellite A300 - 20 p - MS Pro Duo memory card does not work

    I have a laptop Toshiba Satellite A300 - 20 p and MS DUO memory card stopped working.
    He always asks me to format the card.

    I tried three cards of the same type, but still the same problem.
    The cards work in my PSP and my Sonyericsson mobile as well as all computers laptops hp.
    I gave the phone to service center Toshiba here Bahrain and they tell me that this card is not compatible with Toshiba, but this card has worked before in this same laptop...

    My laptop isn't even four months, and this is the response I get.
    What is the use of the international warranty of two years if they cannot solve the problems...

    Please help me so sad, I bought a toshiba laptop...

    Thank you

    Hello

    The computer s laptop Satellite A300 card reader - 20 p are supported on these cards:

    8MB - 2 GB SD card
    4 GB to 16 GB SDHC card
    16MB - 2 GB xD Picture card
    Memory Stick 8 to 256 MB
    Memory Stick Pro 256 MB to 4 GB
    8MB - 2 GB MultiMediaCard
    miniSD (with adapter) 32 MB - 2 GB
    512 MB - 4 GB microSD (with adapter)
    Memory Stick Pro Duo(with adapter) 256 MB - 4 GB

    As you can see the Memory stick Pro Duo is compatible and can be used with the adapter. But only card up to 4 GB are supported.

    In your case I recommend you remove the card from the card reader location.
    -And then uninstall the driver from card reader in Device Manager.
    -Then download the driver for the card reader from the European driver Toshiba page.
    -Then install the card reader driver
    -restart the laptop and check the card reader again.

  • High capacity SD card does not work in the card slot

    I have problems using a a MicroSD card of 200 GB in my Macbook Air 13 inch card reader.

    SanDisk Ultra 200 GB MicroSDCX UHS - I card

    MacBook Air 13 inch MID 2012

    Yosemite OSX 10.10.5

    I have had this 200 GB card for a week and been using it with my Nifty mini-convoyeur. Previously I'd been using a memory card Micro SD of 64GC since mid-2012 without any problems so far.

    Since I use this 200 GB card a week ago she continually disassembles, becomes corrupted and unreadable, not mountable and lift all kinds of errors when I try to copy the data or even make a new folder. I have used about 20 times utility disc up, check, repair, and operate. I had re - format 6 times now and I've tried all the different formats and same partitioning it but still questions. Ive tried to identify the problem as follows.

    (1) I thought the card was defective at first, however I only get these questions when I put the SD card micro of 200 GB into a USB card reader and connect it via the USB port.

    (2) I thought that the OWL mini-convoyeur may be defective, but the problems do not occur with my 64 GB SD micro card.

    (3) as the problems occur even when I put the 200 GB Micro SD in a Standard SD adapter (in fact I've tried 3 different adapters just to be sure) and put it in the slot of the card. 64 GB card works fine, but the 200 GB card still has questions.

    So the only conclusion I can come to is that there are problems with the Macbook Air with cards 13 inches high capacity...

    The only question now, it's just my machine or all the SD integrated card readers? I don't know anyone who has another person to check if...

    Any suggestions, or an overview?

    I understand this card capacity of 200 GB is quite new, and I was not able to find someone with problems online. I may be the first, or it's just my computer/card reader that is faulty?

    Thank you, Chris.

    So I'm at a point where I can assure you:

    200GB SD card works fine via USB hub/MiniSD adapter. I can mount/dismount and copy to the card without any problems. 200GB SD Card will be mounted with the internal SD card slot, but try to copy to card gives me the following error:

    "The operation cannot be completed because an unexpected error occurred (error code - 50)."

    Using a smaller card gives me no problems at all.

    Ive also updated to El Capitan 10.11.2 (15 c 50).

  • Satellite P300 - Value Added package does not work after the computer restarts

    Hello

    I have a Toshiba Satellite P300 PSPCCA Windows vista ultimate x 64. I can't do my work button soft touch. I downloaded latetest VAT package and installed. After installation it asks to restart but I restart my laptop and I make just restart Flash Card and my button works all good touch app that is silent, Media Player, etc., but once I restart my laptop it stops working.

    I tried the uninstaller and reinstalling but no luck. I read in the forum toshiba on running CCleaner and do a fresh install but still have the same problem.

    Does anyone of you knows how to solve this problem.

    BTW, I got the software AVG internet security on my system, but have added folder toshiba for exclude of realtime scanning just in case if its causing problems but not luck. I searched qurantine folder and its nothing in there.

    Please help me get my work button soft touch.

    Thank you.
    Kind regards
    Jay

    Post edited by: Jay Padia

    Hello Jay

    I agree with Akuma. All you can do is remove VAP preinstalled system and reinstall the latest version. Why you didn t follow the instructions to restart the computer after the installation of VAP?

    I installed VAP several times on my Satellite P200 and Satellite A300 without any problem, but after installing the latest version, I rebooted phone immediately. The procedure of the facilities has been completed and necessary processes started in the background. I guess that's the problem on your Satellite P300.

    If nothing is done the last step is to install the OS by using the DVD facilities. After doing this you will own preinstalled OS and everything works well again.

  • Deliver the sound does not work on the computer.

    So sometimes the sound on my computer works just simply. This problem occurred recently: after watching a few movies on the computer using a double headphone output (I was watching with my sister) it worked fine, no problem. A day or two later, I tried to watch a video (on headphones) and the left earphone wasn't working - no sound didn't go out. I figured out the headphones were very good, but it's the computer problem. He started to work again the next day, but then most problems - sometimes no sound at all. No speakers or the headphones. Ever since then, it's like Russian Roulette, sometimes it is sound, sometimes it does not. I just wish the best. I tried troubleshooting and he said that he could not detect any problems. I tried to it turn on and off again? Yes, several times.

    I'm desperate for help! Thanks in advance.

    Hello

    If the computer has a separate sound card remove ALL power and then remove and reinstall
    the map. If it's built-in sound so either she developed a hardware problem or
    something interferes with him. If the device goes wrong it may be replaced if

    a separate device or it can be disabled in the BIOS or Device Manager and
    a card can be used OR a USB card sound.

    Check in the Device Manager - Sound - Driver tab - go to the site of the manufacturer of the audio device
    Download and install the latest driver.

    ========================================================

    Sometimes 3rd part antivirus/security or another program may be causing interference.

    How to perform a clean boot for a problem in Windows Vista, Windows 7,
    or Windows 8/8.1
    http://support.Microsoft.com/kb/929135

    Other programs to help:

    Autoruns - free - see what programs are configured to start automatically
    When your system boots and you connect. Autoruns also shows you the complete list
    locations of registry and files where applications can configure start automatic settings.
    http://TechNet.Microsoft.com/en-us/sysinternals/bb963902.aspx
    Process Explorer - free - find out what files, registry keys, and other objects
    processes have open, which DLLs they have loaded and more. This unique
    powerful utility will show you even owned by each process.
    http://TechNet.Microsoft.com/en-us/Sysinternals/bb896653.aspx
    =========================================================

    Check with support from the manufacturer of your system (manufacturer of motherboard for customized systems) their
    online resources and the drivers and ask questions in the forums about known problems.  Or
    with audio device manufacturers / real sound if a separate device/map.

    No sound in Windows - use the troubleshooting tool
    http://Windows.Microsoft.com/en-us/Windows/no-sound-help#no-sound=Windows-8&V1H=win8tab1&V2H=win7tab3&V3H=winvistatab1&v4h=winxptab1

    =========================================================

    Check if you have the latest available driver. Download and install the latest driver.
    If you have the latest driver to re - install the same.

    More troubleshooting if necessary:

    Microsoft - hardware and drivers
    http://Windows.Microsoft.com/en-us/Windows/hardware-drivers-help#hardware-drivers-help=Windows-8

    Why Windows is not find my device?
    http://Windows.Microsoft.com/en-us/Windows-8/why-isn ' t-windows-conclusion-device

    What happens if a device is not installed correctly
    http://Windows.Microsoft.com/en-us/Windows-8/what-device-isn ' t-installed-correctly

    Look at the sites of the manufacturer for drivers - and the manufacturer of the device manually.
    http://pcsupport.about.com/od/driverssupport/HT/driverdlmfgr.htm

    I hope this helps.

    Rob Brown - Microsoft MVP<- profile="" -="" windows="" expert="" -="" consumer="" :="" bicycle=""><- mark="" twain="" said="" it="">

  • Sound does not work after the computer Windows XP formatting.

    Hello

    I am the customer service representative who is to ask your question on behalf of the client. After reformatting his computer Windows XP and installed all the drivers, its only driver no longer works. It has an Assembly of Dell 3000 Windows XP Professional. The device that is not working is a Soundmax audio controller that has yellow mark in the Device Manager. It ran Windows update troubleshooted it and restarted the machine and the problem persists.

    Perhaps the sound card must be replaced.

Maybe you are looking for