Camera on Satellite A300 with Windows 7 - video works, microphone not detected

Similar Questions

• Bluetooth kit Satellite A300 with Windows XP

  How will I know if my Satellite A300 is equipped with a bluetooth module? It has a Wi - Fi connection and I pay with bluetooh but when I installed Win XP (it comes with Vista) and install the bluetooh monitor, nothing happened in the Panel.

  I don't see incontinence of bluetooth devices.

  Bluetooth must be inserted in such a silver Bluetooth sticker is at the bottom of your laptop.

• Satellite A300 - FN key doesn't work is not in Windows 7

  I just upgraded my laptop Windows 7 64 bit.
  Since I upgraded the keys FN "F1 - F12" did not work, light on the keyboard lights up when I press the 'FN' key so the button seems to work and the front NATIONAL arow and keys still work but not the keys "F1 - F12.

  Anyone know how to fix this?

  Hello

  Have you installed the package of value added?
  If this isn't it!

  In addition, you should check if the Flash from Toshiba card utility is enabled/activated.
  You can check this in Programs\Toshiba\ Flash Card Utility

  Check it!

• Music satellite A300 PSAG4A keys doesn't work do not

  Hello

  I am new to this forum and in fact Toshiba problems in general. : P

  I have a laptop Toshiba Satellite A300-PSAG4A running on Vista 32 bit. A few days ago the music keys Harman/Kardon lighting on it suddenly stopped working. When I use my cell phone, I usually put in mode 'sleep' and normally wake him using these support the keys - but for some reason, they stopped randomly light up and answer.

  I tried used - by restarting the computer laptop and test frantically buttons, but of course, they do not react. Keys and the laptop itself served very well up to now I can't think of any reason why this is happening now.

  I'm not super computer savvy but I did some reading on the subject of these keys and wanted to try to reinstall the Toshiba Value added Package method - but I couldn't find the PVAT file anywhere on my laptop.

  In addition, Toshiba does not offer support for my laptop computer series (A300-PSAG4A); their download section is only for the ST series. Please correct me if I'm wrong - I could be looking right or whatever.

  I did a system health report to check if it is a driver problem and it came with the following text:
  Error messages two affirming that "the device for the Base system device driver has not been installed" and the other saying that "the device driver for #UNKNOWN # has not been installed."

  I don't know that anyone say or if they are relevant to my problem.

  Help, please?

  > I'm not super computer savvy but I did some reading on the subject of these keys and wanted to try to reinstall the Toshiba Value added Package method - but I couldn't find the PVAT file anywhere on my laptop.

  Hi, you can download the VAP (value added package) for a Toshiba driver page.

  > Also, Toshiba does not offer support for my laptop computer series (A300-PSAG4A); their download section is only for the ST series. Please correct me if I'm wrong - I could be looking right or whatever.

  Surely, they do think you searched on a fake page the A300 PSAG4A seems to be an Australian series of Toshiba and therefore, you should check page driver Toshiba to THE.
  http://www.MyToshiba.com.au/support/download

  Here you should find the VAP

  Recommend to uninstall the first PPV, and after new reboot you could install the package again.

• Adobe photoshop 3.0 compatible with windows 7 system works, if not what do I do?

  How can I run adobe photoshop 3.0 in windows 7?

  I guess you mean CS3 Photoshop version 12 and not real version 3 of 1992.

  I have CS3 running on Windows 10 without problem, so there should be no problem in Windows 7.

• How do I defragment & cleaning Satellite C650 with Windows 7

  How do I defragment & cleaning Satellite C650 with Windows 7?

  Hi toddlingham,

  I agree with Akuma. Disk Defragmenter tool is also available on Windows 7 and CCleaner may clean the registry and delete the temporary files and not used. It is very nice tool.

  Also I recommend you to uninstall all the programs you n t need more to clean install. For example, you can remove all evaluation software and applications that you don't need.

• Update BIOS on Satellite A300 with Vista 64-bit

  How can I update the Bios on a Satellite A300 with Vista 64 bit.

  There is only one available 32-bit update utility.

  So don t update the BIOS if the compatible version is not available.
  BIOS for Vista 32-bit is not compatible with Vista 64-bit!

  See you soon

• I have a Dell Inspiron with windows XP and I can not start. I have the windows disc but do not know how to clean and reinstall. Please help me

  I have a Dell Inspiron with windows XP and I can not start.  I have the windows disc but do not know how to clean and reinstall.   Please help me

  You can repair XP or try the following:
  http://support.Microsoft.com/kb/917964
  http://support.Microsoft.com/kb/307545

  TO

  Re - install http://support.microsoft.com/kb/978788

• How do I burn a cd with windows media player and have not any second 3 breaks inbetween the songs?

  How do I burn a cd with windows media player and have not any second 3 breaks inbetween the songs?

  In the following FAQ... scroll to the bottom for...:
  "Why are there gaps sometimes long between songs on the CD I burn?

  Windows Vista - burn a CD or DVD in Windows Media Player:
  Frequently asked questions
  http://Windows.Microsoft.com/en-us/Windows-Vista/burn-a-CD-or-DVD-in-Windows-Media-Player-frequently-asked-questions

  The free software CDBurnerXP has an option to burn a
  CD music with or without addition of gaps.

  (if the audio has static air at the beginning or at the end...
  which will need to be deleted manually with an audio
  Editor-in-Chief).

  (FWIW) It's always a good idea to create a system
  Restore point before installing software or updates)

  CDBurnerXP
  http://www.CDBurnerXP.se/
  (Yes, it works on XP, Vista, 7)

  CDBurnerXP to make Audio disc
  http://CDBurnerXP.se/help/audio/compileaudio

• Dell PowerEdge R710 with windows server 2003 R2 is not start windows in normal mode.

  Hi Sir,

  Dell PowerEdge R710 with windows server 2003 R2 is not start windows in normal mode after upgrading the RAM to 64 GB.

  Arrangement of RAM is made 4 our 16 GB of RAM on 2 channels. I get no error message about the RAM configuration. It is booting in safe mode but not start in normal mode, his hanging during windows startup.

  Please give me guide to solve this problem.

  I thank & regards

  Ramanantsoa D

  Thanks for the reply.

  My version of windows is 32-bit Windows server 2003 Enterprise Edition Service Pack 2.

  Although I have not tried switching/EAP, I will try that and get back to you.

  And again something I have an idea of the installation of windows server 2008 R2 Standard version on this server, it will support? Please let me know Chris.

  Thank you.

• How to do a system restore with windows 8. my mouse is not working but the keyboard works

  How to do a system restore with windows 8. my mouse does not work but the keyboard works.

  I've updated some drivers and now my mouse does not work

  Press the Windows key and press 'R '. Type "appwiz.cpl" without the quotes in the box run. Use the arrow keys to scroll down for updated drivers. When the driver is highlighted Press 'enter '. Use the arrow keys to select Yes in the uninstall confirmation dialog box. Restart the computer.

  You can run the restoration of the system from a command prompt if you are unable to uninstall the drivers. Press the Windows key and 'X', use the arrow keys to select the type of command (Admin) line "rstrui.exe" without the quotes. Use the arrow keys to navigate the windows system restore.

  Jim

• I have a problem I bought the collection master in 2012 for Mac just got a new computer with Windows 10 and I do not know how to download and install master collection on my new computer, can someone help me?

  I have a problem I bought the collection master in 2012 for Mac just got a new computer with Windows 10 and I do not know how to download and install master collection on my new computer, can someone help me?

  Available downloadable Setup files:

  • Suites and programs: CC 2015 | CC 2014 | CC | CS6 | CS5.5 | CS5 | CS4, CS4 Web Standard | CS3
  • Acrobat: DC, XI, X | Suite X | 9,8 | 9 standard | 8 standard
  • Captivate: 8 | 7 | 6 | 5.5, 5 | 1
  • Cold Fusion: 11: 10 | 9.0.2 version 9.0.0, 9.0.1, 8.0.1, 8.0.0, 7.0, 6.1, 6.0, 5.0, 4.0
  • Contribute: CS5 | CS4, CS3 | 3,2
  • FrameMaker: 12, 11, 10, 9, 8, 7.2
  • Lightroom: 6| 5.7.1| 5 | 4 | 3
  • Photoshop Elements: 14,13,12,11,10 | 9,8,7 win | 8 mac | 7 mac
  • Premiere Elements: 14,13,12,11,10| 9, 8, 7 win | 8 mac | 7 mac

  Download and installation help links Adobe

  Help download and installation to Prodesigntools links can be found on the most linked pages.  They are essential; especially steps 1, 2 and 3.  If you click on a link that does not have these listed steps, open a second window by using the link to Lightroom 3 to see these "important Instructions".

• My wifi works on windows 7, but it is not detected on windows 8

  Original title:

  Windows problem 8

  having powercars. My wifi works on windows 7, but it is not detected on windows 8 in my computer dell laptop. How to connect to wifi in windows 8. I tried Fn + F2 but it makes only bluetoth on and outside. I am not able to see too much on window 8 vertical icon bar. How can I connect to wifi on windos 8 too?

  Hi Yvon,.

  1. What is the model of your Dell laptop?
  2. What is the brand and model of the router?

  Adding to the suggestion of SilverBack_1 you can also refer to:

  http://Windows.Microsoft.com/en-in/Windows-8/cant-find-wireless-network

  You can consult the following links for more information.

  http://www.Dell.com/support/troubleshooting/us/en/19/KCS/KcsArticles/ArticleView?c=&l=&s=&docid=420860

  http://Windows.Microsoft.com/en-GB/Windows/network-connection-problem-help#network-problems=Windows-81&V1H=win81tab1&V2H=win7tab1&V3H=winvistatab1&v4h=winxptab1

  I hope this helps. Please post with the State of the question.

• My Fire Fox download video in support not detected on you tube. It is always shows only the first video that i was downloaded.pls help

  My Fire Fox download video in support not detected on you tube. It is always shows only the first video that i was downloaded.pls help

  I don't think there is much you can do about it outside the use of workaround to reload the page until this problem is corrected.

  There is this bug on this problem:

  • http://Bugzilla.DownloadHelper.NET:8080 / show_bug.cgi? id = 642

  I don't know if other extensions download suffer from this issue, as well, so you can try a little more try the website of the add-on and if possible use a different format like WebM, if they are available.

  Also note that not all videos are downloaded and registered correctly. Some may have a size of 0 bytes and fail to download, so, best is to check in downloads of the toolbar Manager in the drop-down list to make sure that the file size is correct (i.e. neither 0 bytes, but a more likely size).

  YouTube streaming makes changes to the code and the way its web pages work, so extensions can fail at any time.

• Satellite A300-1J1 - sound doesn't work only with Windows XP

  I have a problem, yesterday I installed on my Toshiba Satellite A300 1J1 WindowXP, but no sound!

  I tried all sound driver Toshiba on the Toshiba web site but no result!
  Some can help us?

  Hello

  Your laptop is a Realtek audio chip. If you install a Microsoft hotfix before installing the drivers.

  Check out these links:
  http://support.Microsoft.com/kb/835221
  http://support.Microsoft.com/kb/888111

  Welcome them