Camera photo & OCR

I just finished an application that uses a camera to get the video and image, through assistance in this forum, I have received.

Now I want to use this image, which is displayed in the snap-snap-in screen image and use OCR to get the letters and numbers in the image.

The problem I have is that the code that I currently have, calls the image to a directory, and I need to get the image of the camera.

I changed this setting in the acquisition of the vision, but I always get an error when I connect the image that is taken every 0.5 s, on the way to construction.

Can someone help me please?

Thanks in advance!

I just figured out how to do this.

You just need to double click on the acquisition of the vision, and then select the device that you want to recover the image of nd, you must also click on the play button.

Then you must click Finish and after that you need to erase what is no longer needed.

Tags: NI Software

Similar Questions

  • I downloaded my camera photos to "my pictures", but they are separated. How do you put them all in one folder?

    original title: My Pictures folder

    I downloaded my camera photos to "my pictures", but they are separated. How do you put them all in one folder?

    Open my pictures. File | New | Folder and create a new folder. Hold down the CTRL key while you click on all the pix for highlight and drag them into the new folder. Bruce Hagen
    MS - MVP October 1, 2004 ~ September 30, 2010
    Imperial Beach, CA

  • Web cam photos

    When I insert my chip of my trail cam, a message indicates that there is no file and does not show the photos.

    How can I change this so that I can see the pictures?

    It would be a question for web cam manufacturer or their manual/instruction files. Visit their Web site.

  • Can I transfer my photos from my camera photos and how

    I want to put my favorite photo that are on in my images on or in my camera so they can be transferred to the image of Sony.

    I want to put my favorite photo that are on in my images on or in my camera so they can be transferred to the image of Sony.

    You will need to have a usb cable that is able to connect to your camera or your camera must have a memory card. Be advised that if you use the method of memory card, that your computer must have a memory card reader or you could buy a usb memory card reader. They are reasonably cheap.

  • PC offers more download automatic digital camera photos

    When connecting my Panasonic digital camera to the pc I get is no longer a pop-up on the pc screen asking where I want the photos to go. AVG Free has been deleted recently and I installed the Microsoft Security Essential. Is - this blocking the connection? I can't read the discs either?

    Hello - tried these two options and I fear that this still does not work!  Changes made to the computer before it was the removal of the free AVG software and then the installation of Microsoft Security essential in its place.

    The only way at the moment to download my photos has been recommended by another user - who had to go D drive removal and click on a file called DCIM - photos are there and you move them in a file on your computer. This works very well, but removes the images from the camera after being transferred!

    Thank you

    Mikey

  • Xperia z3 compact camera photos in low resolution of loading

    Hi, I have a problem when you want to see my photos from the camera to the app "album". When double tapping the images (to zoom) that often, but not always zooms in to a very low resolution and blocky image quality.

    The photos are saved on the sd card (class 10 sandisk ultra 32gig).

    All this experience?

    Thanks in advance for any help

    Settings-applications-all-album storage and media, stop and erase the data. Turn it back on.

  • Roll in camera photo import does not

    Then my wife came to me and said her phone was strange. After investigation, I found that she had memory 0 left in the 'use' tab in the settings! Pursuit of the investigation, he said she had 2.4 GB of "messages". I didn't even know the messages could be "saved". So I decided to import all his pictures his phone on our PC (Acer 5250-0450 running Windows 7-64 bit) is turned off and plugged the phone on the computer and autoplay opened as usual, however it beeps and says "no images found on this device"... but here I am looking at 142 pictures in the camera, not yet on my computer , and autoplay is to say there is nothing there to import! It makes no sense at all. This leads directly to the question in the same sense of 'storage'... when I open iTunes with my wife's phone connected (that's me as well) it shows tons of used for the 'documents and data' and 'other' space, but there is no option to select theses of storage areas and make destruction or adjustments to recover any space (we both 5 phones gig so space is at a premium). I hope there is someone out there who has worked through these types of problems and can help my wife and I recover a semblance of space on our phones. My wife has only 7 apps and 1 gig of songs she listens to at work... There is NO REASON there should be 0 KB of memory on his phone!

    Because you mention iTunes and "film", I suppose that you have an iPhone of some sort.  Seek help or ask your question here--> https://discussions.apple.com/community/iphone/using_iphone

    Space on your iPhone iTunes shows as 'other' is particularly difficult to treat.  There are many, many posts on this topic.  See, for example, https://www.google.com/search?q=iphone+reduce+other+space&ie=utf-8&oe=utf-8

    As far as images go, I never used the "automatic" import tools Windows photo to transfer photos from iPhone for Windows, and is perhaps that these tools are "confused" by the structure of files on the iPhone.  See if the following works for you:

    1. Connect your iPhone to the computer and wait for the "AutoPlay" window to open.  It should look like this:

    2. Click on "Open the device to view files" and you should see something like this (note that this iPhone is almost completely full, the bar is red):

    3. Double-click on this entry, and you should see a folder named DCIM:

    4. Double-click the DCIM folder and you should see another folder with a seemingly random name:

    5. Double click on this folder and you should see your photos.  Copy/paste or Drag ' drop them in a folder on your computer.  You can then delete them as you wish using the controls on your phone (I suggest NOT delete files on your phone using Windows):

  • Multiple digital cameras photo sequence

    What is the recommended way to create a single, the command sequence is a series of photos taken with several digital cameras?

    In the program photo, that it is easy to create a single sequence of display etc. but as soon as it is exported to an external device e.g. stick of memory, etc to Ext HD, photos are again classified by device and not as a single date sequence. Name change for example in a single 1 - xxx series seems not to solve the problem and stripping as well data Exif using the 'Properties' installation window did not work for me.

    It must be a very common nowadays problem, and I would be recognizing "best practices", by which we can choose the entire series in order of required image, rename the sequence and export it to the new sequence.

    Thank you

    Ron

    Yes which really comes down to the file system used on the device export you it.  If it is running NTFS (very unlikely), he could see all the metadata and fate by it.  But probably he can't see the names once you exported.

  • can not use the card slots to post my camera photos gallery of windows crashes

    No, I have not found solution. on my pc-card slots will not work cause the pictures of my camera fall during validation on windows Gallery?

    No, I have not found solution. on my pc-card slots will not work cause the pictures of my camera fall during validation on windows Gallery?

    ======================================
    Just a guess... but if the photos are originally Photo
    Gallery crashing... you can shot in RAW format
    format. For example... Nikon RAW files have a. NAVE
    extension and Canon RAW files have a. CR2
    extension. If this is the case, install the
    After the codec pack could solve the problem if
    your camera is included:

    Expand the 'Détails' section to see supported devices.

    Microsoft Camera Codec Pack
    http://www.Microsoft.com/download/en/details.aspx?ID=26829
    (Windows 7, Windows Vista Service Pack 2)
    This package will allow RAW supported
    camera files visible in Windows Explorer

    And...

    Maybe you can copy your pictures to a folder on
    your hard drive as follows:

    Insert the memory card into the correct location on the media
    Drive... If open windows... Close them.

    When the card is inserted... If you go to... Reach... Start /.
    Computers / devices with removable storage... is the
    player card on one or several removable disks?

    Removable (e :)) drive
    Removable disk (e :))
    Removable drive (g)

    If_Yes_you can download photos from there. Left
    by clicking on the drive letter that corresponds to the memory
    card slot should display the directory of the card and you
    can copy and paste or drag and drop the photos of your choice
    in a folder on your hard drive.

    Just a select group of photos do a right-click and choose...
    Copy... then navigate to the folder you want in and
    Right-click on the folder and choose Paste.

  • Camera photo + light questions

    Hello!

    I am new to this community and relatively new to After Effect (I was playing a lot in it however). For the moment, I'm trying to understand the workflow and how to make my computer do not explode during the PreRender and work.

    I'm working on a little animation project where I paint landscapes, scan it and use it in AE. Currently, I have a problem where the computer slows to a halt major as soon as I add 1 or more lights and 1 camera to the project. If I have active fires that I can switch to "Custom View 1" full resolution and move without any hickups, works like a charm. And if I turn of the light, I can go "Caméra 1" inte - view and get a glimpse of a mobile camera with no problems. But as soon as I turn on the lights of the computer stops.

    As I said I'm pretty new to this, so maybe it's impossible with the test bench that I use. But it feels strange that it works perfectly when I'm in a custom view 1 and full resolution, but not when behind closed doors.

    Is there a way to lower the quality of the lighting?

    Other ways to make this work?

    What I would really like to do is to use my second monitor as a preview display showing "camera 1". As seen on photo 2 (without light active however), works perfectly until I turn light back on. Same thing if I change my opinion leaves say 'before' on the screen 2, works perfectly on full resolution, but crash when I change the «camera 1"»

    PC

    Intel Core i7 920 @ 2.67

    24 GB ram

    GeForce GTX 970

    Windows 10

    Dedicated SSD 500 GB with 250 GB preserved cache + all project and disabled indexing files

    Windows and AE running on a separate SSD 250 GB

    After effects 2015.3 version 13.8.0.144

    All images/sequences uses stills of proxy (about 1.6meg each)

    Drawn with RADIUS enabled 3D, 3 AA quality: box

    Adaptive resolution

    CameraLight.jpg

    CameraLight2.jpg

    After effects 2015.3 version 13.8.0.144

    would have to notice that - you need to update to 13.8.1 - very important! There was a bug with a spot light maybe that's related.

    set up the camera 1 active camera and see if it's better. What are the specs of your camera? have you chosen a "Preset"? also try to add a new camera with 50mm preset and no DOF.

    What are your strengths? How many pixels?

    come back with the answer and we will get to the bottom of this.

  • You can greatly improve the 8megapixel camera photos in LightRoom?

    I wonder if I use Apple Photos to my iPhone photos. It only pulls in 8 megapixels. LightRoom really improves photos of 8 pixels far vs say a 16 megapixel camera or 20?

    There is no program that can really do. No program can add 'real' information that has not been saved, while shooting.

  • I can't import my camera photos in lightroom.

    This has been fine until now, but this last time I got the following error message: some import operations were not made; The following files were not imported because they could not be read.  It lists then all the pictures I try to import.  I've never seen this message before and ask there is a problem with lightroom as photos can be imported from my camera to my computer with no problems.  Please can you explain / fix this?

    Hi lizc.

    In the Lightroom Import window, make sure you select 'Images' or any specific location as destination on the upper right.

    Please let us know if this can help,

    Kind regards

    Tanuj Sandal

  • Attaché; savings in the camera photo and laptop? EOS Utility 3

    Updated Eos Utility 3 on a Mac 10.9.4 using 6 d or 5 d with a USB cord.  I can ' find where in EOS Utility I can set it to save the file at a time to the laptop as well as in camera (CF or SD) cards?  It is not normal box under the fire remotely in the preferences.

    Second question, I am using EOS Utility associated with DPP for shooting tethered for several years, but really seem to be lost with these new versions is there video tutorials online update can someone direct me to?

    Thanks, jeff

    Hello Archfotos,

    Many options available when shooting tethered with cameras (compatible), save it to the card option is not present.  Images are saved in the memory of your computer.

  • C2M81UA #ABA: camera photo & PC settings do not work.

    The camera & pc settings do not work after the update of Windows 8 to 8.1 Windows. This is a laptop of HP ENVY m4. Its camera does not open. Help, please. And pc settings also does not open.

    Hi @Diya1,

    Welcome to the HP Forums!

    It's a great place to find answers and advice!

    You have the best experience in the HP forum, I would like to draw your attention to the Guide of the HP Forums Learn how Post and more

    I have the bar who after upgrade to 8.1 Windows your Webcam does not open and you don't have a laptop settings.

    As you have no parameters of laptop, it sounds as if something has not installed correctly.

    I suggest you try a Refresh Your PC to solve problems (Windows 8) to see if that will fix it.

    If the problem persists I suggest make a recovery in the factory.

    Performing a recovery of HP (Windows 8) system

    There is an option to backup your personal files to prevent loss of data during the recovery process. If you have not already done one, now would be a good time.

    HP computers - restore files that have been supported to the top using HP Recovery Manager (Windows 8)

    HP computers - update of Windows 8 to 8.1

    If you still have a problem with the Webcam after this here is a link to help you.

    Webcam troubleshooting (Windows 8)

    Good luck!

  • Cannot get my camera photo or other driver discs CD to load in PC

    I got a response, but it was in the form of a question on my removable disk (e :)) not being is not accessible to the computer.)

    Pavel asked if I got a picture of a camera when I click on MY COMPUTER. He wasn't in removable drive section. Or any removable drive announces (e :)) or (f) there used to be, but somehow had moved and I can't get them back where they belong.)

    I also tried to burn a copy of a file on a blank CD and the PC was ready to do it, but a box that came, stated that the pc was not feeling a disc in the tray. He told me to put in a blank CD.

    When I put a CD, I could see the disc rotation bit next to the cursor on the screen, but the Pc was told that the ferry was empty.

    Would a laser dirty playback head be the problem and if so, what would be the best method of cleaning?

    Pavel has, or anyone, please get back to me.  Help

    Thank you.  Paul (greybiker)

    Hello

    1. have you tried to plug the camera into a different USB port and check?

    2 are you able to use other USB devices on the system without any problems?

    3. Since when are you facing this problem? Have you been able to use the camera on the system before?

    4. you remember to make changes to the system?

    5. What is the exact error message that you encounter when you try to access the CD/DVD drive?

    6. What is the model of your camera and who is the manufacturer?

    I suggest to update the drivers for the chipset on the system and check if the problem is resolved.

    Method 1:

    I suggest you run the fix that is present in the link mentioned below.

    Your CD or DVD drive cannot read or write media

    http://support.Microsoft.com/mats/cd_dvd_drive_problems/en-us

    Method 2:

    Apart from that, I suggest you follow the steps mentioned in the article below.

    How to troubleshoot common problems that occur when a Windows XP-based computer cannot read a CD or DVD

    http://support.Microsoft.com/kb/321641

    Method 3:

    I suggest you follow the steps mentioned in the article below.

    Advanced troubleshooting tips for General USB for Windows XP problems

    http://support.Microsoft.com/kb/310575/en-us

    USB port may stop working after you remove or insert a USB device

    http://support.Microsoft.com/kb/817900/en-us

Maybe you are looking for