Similar Questions

• Screen saver does not stay on during the night

  I have problems with my computer screen saver does not stay on during the night.  In addition, we noticed that the computer must be restarted during the night. Instead of the screen saver up and running in the morning, the computer is the login screen.  Our computer is turned on all night and not located to get to sleep.  Ideas or settings that I need to check?

  Hello William,.

  Thank you for the update.

  You can try to follow the following suggestions to solve the problem.

  Method 1: I suggest you perform the clean boot and check if the problem persists because, put your boot system allows to identify whether third-party applications or startup items are causing the problem. You must follow the steps in the article mentioned below to perform a clean boot.

  How to perform the clean boot in Windows

  http://support.Microsoft.com/kb/929135

  Note: See "How to reset the computer to start normally after a boot minimum troubleshooting ' to reset the computer to start as usual after a repair.

  Method 2: I also suggest you to remove the schema of eating plan and create your own plan from the link and check.

  Change, create, or delete a power plan (scheme)

  http://Windows.Microsoft.com/en-us/Windows7/change-create-or-delete-a-power-plan-scheme

  See also:

  Power plans: frequently asked questions

  http://Windows.Microsoft.com/en-us/Windows7/power-plans-frequently-asked-questions

  I hope this helps. Otherwise, please free to write us again and we will be happy to help you.

  Thank you

• Light (switch) on my screen does not turn off. I have to shut my computer down several times a day to turn off the monitor.

  Light (switch) on my screen does not turn off.  So, I shut down my computer and restart several times a day, because when I put it in mode 'sleep', he wakes to the top in a few minutes and will not fall asleep.  I could put a blanket on my screen when not in use, but I'd rather find a way to make it stay asleep when I tell him.

  Light (switch) had already done once before and I was so worried that once I turned off the monitor that I would never get it new on... a bit short of money here, to buy a new monitor, but the next day, I pressed the power button with an additional downward pressure and I could so he could start working again (able to turn the market monitor).  It was about 3 weeks ago.  Now, the light stays green, unless I stop the whole computer.

  Maybe my main problem is sleep mode, which removes the screen for like 2 minutes and then he wakes up to the top and is so rude when I myself and try to sleep, I just turn off the monitor everytime I put the computer to sleep.

  Now, I can't turn off the monitor, except by turning off the computer.

  Hi JDandGinger,

  I suggest you follow the provided article and check if it helps.

  http://Windows.Microsoft.com/en-us/Windows-Vista/troubleshoot-power-problems

  http://Windows.Microsoft.com/en-us/Windows-Vista/troubleshoot-monitor-and-video-card-problems

  If the problem still persists contact the manufacturer of the monitor for more help and information.

• Double click on the ios10 lock screen does not display Apple pay even if it is enabled in the settings

  Double click on the ios10 lock screen does not display Apple pay even if it is enabled in the settings.

  Hello JPMain,

  Thank you for using communities of Apple Support. I understand Apple pay is not an option when the double click the Home button. I know access pay Apple for a locked screen can do so useful everyday. I'm happy to help you to get this resolved with you.

  I recommend first restart your iPhone. This can solve many unexpected behaviours. Follow the steps below if necessary.

  1. Press and hold the sleep/wake button until the Red slider appears.
  2. Drag the slider to turn off your device completely off.
  3. Once the device turns off, press and hold the sleep/wake button again until you see the Apple logo.

  Restart your iPhone, iPad or iPod touch

  If the problem persists, the next option would be to reset all settings. It takes all the defaults, including passwords and Wi - Fi networks, alerts, notifications, brightness, wallpaper and sounds. This will also remove your cards Pay of Apple. Even if no content is lost with this step, it is always a good idea to back up first. If you do not have a recent backup, use the following link for assistance if necessary.

  The backup of your iPhone, iPad and iPod touch

  Once you have correctly saved, reset all settings in settings > general > reset > reset all settings.

  Have a great day!

• My touch screen does not work.

  My touch screen does not work. Sometimes, and other times I have to reboot. I restored my phone, but it still has the same problem. Any suggestions?

  The following information is taken from the HT201406 of the Apple KB article:

  If the screen of your iPhone, iPad or iPod touch does not respond to touch

  If your touch screen responds slowly, inconsistently, or not responding at all, follow these steps.

  Check your touch screen

  Make sure your hands are clean and dry, then try the following steps:

  1. If you have a case or a protective screen on your device, try removing it.
  2. Clean the screen with a soft, slightly damp, lint cloth.
  3. Unplug your unit.
  4. Restart your device. If you are unable to restart it, you can force restart your device.

  If your touch screen is still unresponsive as it should, contact the Support technique Apple or make your tablet in an Apple Store or Apple authorized service provider.

  Adjust your settings for tactile 3D

  If you have an iPhone 6s or later that does not properly respond to tactile 3D press, you can adjust the settings:

  1. Go to settings > general.
  2. Click Accessibility > Touch 3D.
  3. Then set the sensitivity of the setting.

  Get more help

  • Find out what to do if your screen does not turn.
  • If your screen is cracked or broken, implemented the repair service for your iPhone or iPad.

• my iphone 5 s screen does not work.

  my iphone 5 s screen does not work. Touch is responsive but display sows a lines vertical coloring...

  TNX for help

  Hello

  I suggest you contact Apple Support (mail service may be available) or make a Genius Bar reservation to have your iPhone verified and, if recommended by Apple, served (either under warranty or through paid repairs):

  • Contact - Support official Apple
  • https://Twitter.com/applesupport
  • http://www.Apple.com/retail/Geniusbar/

  To check your warranty status:

  • https://checkcoverage.Apple.com/

• iPhone SE: rotation of the home screen does not work

  Hi guys,.

  I already looked for answers to this problem in discussions, but I couldn't find anything that solves the problem. Here's the situation:

  -brand new SE iPhone: he got yesterday and just imported my contacts, changed some settings and installed a few applications... that's all.

  -Home screen does not turn in landscape mode (my previous blackberry contact made it by default, so I'm used to doing all that on the phone horizontally keep and wasn't expecting such a problem with iPhone); rotation does not also happen in the app store. However, it runs perfectly landscape when you use applications (Calculator, messages, etc.).

  -J' tried the solutions suggested by other users in different threads:

  (1) checked the lock on the gray screen (it was off). tried to turn it on and then again on the way to see if the rotation is enabled without success.

  (2) looked in ' settings/display and brightness' to see if "zoom mode" has been activated to move it off but discovered that the iPhone SE (or his version of the iOS) has no "zoom mode" option in this Panel... no problem, but no solution: /.

  (3) I think that try a reset should not be necessary, that the phone is brand new and it behaved like that the first time I have it turned on (I reason?).

  (4) I read that some versions of the iPhone (for example 6) do not have the "home screen rotation" function (which, to me, seems completely absurd) and, supposedly, you can use the phone in portrait mode, while the 6s for a reason any the available option: the specs should be similar to the 6s, anyone know (for sure) if the home screen rotation is supported on the self?

  Thank you all in advance... I hope that someone will come up with a solution because I know, it seems a stupid thing, but for me, it's terribly boring.

  the plug should be similar to the 6s, anyone know (for sure) if the home screen rotation is supported on the self?

  To my knowledge, no.

  Barry

  P.S. I have a.

• Qosmio DX730 and Win8 - touch screen does not work

  Hello

  My wife's parents bought a Toshiba Qosmio DX730 (model PQQ11A). They have recently upgraded to Windows 8 and the touch screen does not work now.

  The problem is lack of drivers (the monitor driver reports as a generic PnP monitor).

  I have went on the Toshiba site and selected downloads driver for the appropriate model and installed a number of drivers, including recommended NVidia display drivers. There is no drivers on the site that seem to install support for Toshiba touchscreen.

  Are there no drivers available for this model Windows 8? If not, is there another solution? If Yes, where can I find them. Any help very appreciated because they have nice and bought computer Windows 8 so they could use the touch functions.

  Thank you.

  Hello

  On the page of the Toshiba UE driver you can find drivers for Win 8.
  As far as I know that you will install the Toshiba display driver for the touch function works correctly.

  I found this driver.
  Please check if you can install this:
  [Win 8 TouchScreen software for Qosmio DX730 | http://eu.computers.toshiba-europe.com/innovation/download_driver_details.jsp?service=EU&selCategory = 2 & selFamily = 381 & selSeries = 366 & selProduct = 7338 & salt ShortMod = null & language = 13 & selOS = 40 & selType = all & rupload = Yes & monthupload = & dayupload = & useDate = null & mode = allMachines & search = & action = search & macId = & country = all & selectedLanguage = 13 & type = all & page = 1 & ID = 83418 & O SID =-1 & driverLanguage = 42]

• Camileo S10 camera does not remember the setting of the image stabilizer

  Hello reader Forum,.

  Is it normal that my Camileo S10 camera does not remember setting image stabilizer?
  I use mostly the 720px setting and stabilizing on but after that the camera is off the stabilizer is off again.

  Greetzz... Ben

  Hello

  This could be possible.
  I remember that the focus does not work if the stabilization has been activated
  So maybe it of the intent of the manufacturer that the stabilizer would be disabled again.

  Welcome them

• Satellite C850-1LK - screen does not work

  I got the c850-1lk for about 6 months and it is running Windows 8.1. I started it this afternoon and to navigate on the internet for half an hour when the screen turns off (power and wifi lights still on and could hear the fan running). I turned it and then turn on again, but the screen does not light even if I assume that the laptop itself starts well.

  The laptop was not struck and no physical damage has ever been done for her. The only previous problems were related to windows and the update 8.1 where he managed to remove the bootloader, but I managed to fix it with a bootable Linux disc then a complete reset of the system. Linux isn't there anymore.

  Any help would be greatly appreciated.

  It's really not easy to say what the problem is here. Remove the battery and press the power for 30 seconds. Connect the power supply only and start it again.

  The problem when you do this?

• Satellite Pro C660D - screen does not turn

  I just got my Satellite Pro C660D back from repair (for a faulty fan), but the screen does not light when I start the laptop.

  She lights up on the front (and I can rotate the block number power sp that the keyboard works).
  Any ideas?

  I agree, I mean the laptop should work just fine after it has been fixed by ASP so I think that something was not right here and the technician must check this!

• Screen does not work on Satellite L775-10F

  I turn on the computer and the screen does not work. Everything seems fine but the screen is all black.

  Nothings happening. I tried turning market and its still does not.
  I also tried to connect to my TV with an hdmi cable.

  What should I do?

  Connect it to the TV and wait until Windows 7 is fully loaded (you will hear sound Win) than trying to use FN + F5 several times. It may happen on the TV Office. Be sure you use the right settings on the TV (HDMI port must be enabled on the right).

  F nothing helps I presume the display can be defective then contact the closest service Toshiba and let them check your laptop.

• Satellite 2450-201: monitor does not stay in place?

  Hi guys of

  I just wanted to know if anyone has a problem of monitor loose were the rear monitor folds and does not stay in place and is there a simple solution? Or this happens over time?

  Thank you

  Hello

  It sounds like a problem of mechanics monitor on you laptop.
  I don t think that you will solve this problem without any help from the technical person.
  I recommend you contact Toshiba service in your country. Explain the situation and I'm sure he will find a solution.

• I accepted the last update. Now, I can not display to the right of the main Itunes store, where top songs, etc would be. As the screen does not. Only on the HOMEPAGE of ITUNES STORE! Help!

  I accepted the last update. Now, I can not display to the right of the main Itunes store, where top songs, etc would be. As the screen does not. Only on the HOMEPAGE of ITUNES STORE! Help! I've tried everything. Google it. Searched through itunes, etc. It MUST be a bug, because it started right after I accepted the 12.3.3 update on my laptop running Windows 7 32.

  I count on the part of the main screen, which is not. Its strange. PLEASE HELP ME! In addition to the main page of the Itunes Store, everything else works fine as before. Music from my library work screens, etc.

  I also have exactly the same problem since the last update. Tried to find a way to solve the problem but no luck. Someone please help!

• Arm, wrist and the screen does not light.

  I just wanted to give a few comments. When I walk, carry heavy bags and I want to watch the time I lift my arm to look at my Apple Watch and the screen does not light. Maybe its because the movement of the arm is subtle, since I am carrying heavy bags. I was wondering if that could be repaired since both times I tried it, annoyed me. Walk in a street busy NYC with my groceries, I would like to know something, briefly, on my watch as I walk with the duty to stop or to disembark the bags.

  Hello

  It is a community of support based on the user.

  To make sure that your comments and suggestion are presented to the attention of Apple, you can submit the following form (all comments are read by Apple):

  https://www.Apple.com/feedback/watch.html