Camileo S10 does not

Similar Questions

• Camileo S10 - does not light

  I used my Camileo S10 only for a few minutes. It has low battery display and is released automatically. After that, I curled the battery on the charger more then 12 hours.
  I put the battery, and now the Camileo S10 won't turn on.

  Some here had the same problem?

  Hello

  You can try different things.
  1. clean the battery contacts
  2. connect the device to the computer via the usb cable and try to turn it on
  3. charge the battery for a short time (about 10 minutes) and try again

  Good luck

• Camcorder Camileo SX500 does not save pictures

  Hello
  My camcorder Camileo SX500 does not record pictures during the shooting in normal picture mode.
  But when images are turned on the timer, the pictures are saved, please I need your help!

  Try this:
  Remove the AC adapter and the battery pack to the camcorder, wait a few minutes, then
  Reinstall the battery, and then try again.
  I recommend you also to remove the current SD card and check if the same question would appear using different SD cards.

  See the user manual for more info:
  http://Support1.toshiba-tro.de/Tedd-...1111104440.zip

• Toshiba Camileo P10 does not turn

  I have a toshiba camileo p10. The problem is that the camera does not turn. I tried to recharge the battery, but the red light blinks for hours.

  I tried without the battery and the charger plugged but nothing happened. I cleaned the contacts.
  All solutions?

  Have you removed the battery AND the AC adapter?
  Try this. The two parties should be removed/disconnected.
  Leave the camcorder for some time (a few hours). Press and hold button power 30 sec long. After this plug in the battery and charger.
  Wait until the battery has been charged and then try to turn on the cam by pressing the power button.

  Good luck buddy.

• Camileo P30 does not work when the 8 GB SDHC card is inserted

  Hello
  I just got a new camcorder Camileo P30.
  I also bought a card 8 GB class SDHC 6 100 'Lexar Premium' x
  And it does not work with the card inserted.

  Here are the symptoms:
  (1) when the card is not inserted I can do everything OK - take pictures and video, use the menus, it turn on and off.
  (2) when the card is inserted, the following occurs:
  2.1) I can't take pictures or video - it does not meet the pressed buttons.
  2.2) I can't access menus.
  2.3) I can't shut off again.
  2.4) I do not identify the amount of memory is available (shows only 0 recording time remaining).
  (3) I have tried different combinations of:
  3.1) Insert the card so that the camera is turned off.
  3.2) Insert the card so that the camera is turned on
  3.3) Insert the card while the device is switched on and in one of the menus.
  (4) the camera doesn't always work if I take the card again.

  During these expriments (#3), I was sometimes able to get a record time correct left (#2.4), but still #2.1 to 2.3 # were a problem.
  At one point, I was also able to "format" the card and subsequently, he showed a record very long time available (not matching only not to the size of the map) and #2.1 to 2.3 # were still in force (i.e. I couldn't use the camera or turn it off).

  Note to work around the #2.3 I took the battery.

  I was not yet looking for updated firmware, or connect it to the PC.

  Has anyone of you has met with such a problem?
  What did you do to solve it?

  Thank you.

  Hello

  Have you tried another card SDHC?
  I m not very well what is happening here, but I recommend you another card in this camcorder.
  I m P30 not owner but I have a: 30 and the camcorder reads without problems for 16 GB SDHC card. It works perfectly.

• Tecra S10 does not hibernate on XP Pro

  Hello

  Tecra S10-10th with factory v Bios 1.60 (localozed in Polish). All new opened its doors today.

  Everything works except that the machine hangs during the return form XP hibernation mode.
  Recovery DVDs contains XP Operarting system preinstalled Service Pack 3.

  Tecra freezes after completing the progress bar white together for recovery XP (progress bar) at the bottom of the black XP start screen.

  No additional apps installed - PC brand new, created from plant Toshiba Recovery DVD with XP PRO SP3.

  Please help me.

  Hello

  I put t know if it will be useful or not, but one of my friends had a Tecra S10 and Windows XP froze from time to time

  He has updated the Authentec fingerprint software and this was the solution!

  The necessary software update can be downloaded from the page of European driver for Toshiba!

  Find out!

• Camileo H10 does not write the files to SD card

  Hello

  I bought a Camileo H10 in December. It's a nice cam, but sometimes I record video in HD format, the file will not be stored on the SD card.

  I tried a class 8 GB 2 and one of 16 GB class 6 SD card. This problem strongly deformed, when I record a video not the first time in the life cycle.

  Another problem is, on the videos, the audio stream is fast. When audio is played, the images run 10% longer than the audio.

  Someone knows, there is a firmware update?

  Thank you

  Stefan

  > sometimes I record video in HD format, the file will not be stored on the SD card.
  First of all you must check if the SD card is not locked SD card supports a lock that you could not format the SD card or store something on this map.
  In addition you should take a look in the user manual and need to check what SD cards are supported!

  > Another problem is on the videos, the audio stream is to fast. When audio is played, the images run 10% longer than the audio. Someone knows, there is a firmware update?

  Why you need a firmware update? Don't you think that it is a firmware issue?
  I think that this has nothing to do with the firmware or a cam problem.
  My father has a HD cam and this issue appeared also with video recording high definition.
  The problem is that your video needs to be converted and you have the right codec

• Camileo S20 does not save to the new 16 GB SDHC card

  Camileo s20 won't record I bought a new card 16 GB sdhc for camcorder and it will not save keeps saying memory full, I can record only for 1 min without card
  Any suggestions please?

  You hear it records, but don t want to work with this SDHC 16 GB card, right?
  What is with the other cards? Are you sure that this card is 100% compatible?

  I use SanDisk 4 GB micro SDHC card with adapter with my Camileo H30.

  I think there must be a compatibility problem.

• Toshiba Camileo P30 does not work.

  I have a camcorder that has stopped working for no reason.
  The battery shows fulluy loaded, but it won't turn on at all.
  Can someone help me? The camcorder is faulty now?

  Thanks in advance!

  I'm afraid that there could be a hardware problem m.
  I have a: 30 and similar issue happened to me, but I could restart the: 30 still once, I removed the battery, press the TV power button waited a few hours and plugged the battery again and it worked again do not know why this happened, but I never noticed the same problem again

• Camileo S10 camera does not remember the setting of the image stabilizer

  Hello reader Forum,.

  Is it normal that my Camileo S10 camera does not remember setting image stabilizer?
  I use mostly the 720px setting and stabilizing on but after that the camera is off the stabilizer is off again.

  Greetzz... Ben

  Hello

  This could be possible.
  I remember that the focus does not work if the stabilization has been activated
  So maybe it of the intent of the manufacturer that the stabilizer would be disabled again.

  Welcome them

• Camileo h10 flash or movie light does not work

  Hey,.
  Does anyone have any ideas as to why flash does not work on my h1o camileo camcorder. ? or the pilot light.

  Thank you

  Neil

  Please help somebdoy!...

• Camileo HD menu button does not work

  This msg is a continuation of a previous thread where my Camileo HD screen does not stay on.
  After connecting the camera to a TV screen where I could see, I discovered that the "menu" button does not work although other functions, such as zoom and replay works OK buttons.
  Do you know how to solve this problem?

  > This msg is a continuation of a previous thread where my Camileo HD screen does not stay on
  Why you open new thread so don t follow your first thread on this topic:
  http://forums.computers.Toshiba-Europe.com/forums//message.jspa?MessageID=189575

• Hibernate does not work on my Tecra S10-101

  Hibernate does not work on my new Tecra S10-101. I searched the internet but
  has not found a good solution. Cuisne someone provide help to solve this problem?

  Kind regards

  Bert

  Please explain the problem more.

  What do you mean by "does not?

  You can enter at least hibernation?
  Pick up from the hibernation failure?
  Hibernation is missing in power options?
  Are you running XP or Vista?
  What Service Pack you have installed?
  Did you install your own version of Windows or is - what a correct installation of Windows from Toshiba?

• Tecra S10-128-Vista 32 - eSata does not work?

  Hello everyone,

  I have 2 external hard drives USB\eSATA, an AKASA 3.5 and a VANTEC 2.5, they work fine in USB mode, but in eSATA, I get no response from the TECRA S10-128.
  The wealthy drive 3.5 does not need external power, the 2.5 power, when I connect the cable, is not a led flash.

  The OS is 32-bit previously connected original Vista.

  All ideas, King regards,
  FERRETE

  Now, I realized that the Tecra S10-128 is sold only to the Portugal! Here you can see what losing bean you'v: p.

  http://PT.computers.Toshiba-Europe.com/innovation/product/Tecra-S10-128/1060596/toshibaShop/false/
  .

  .

  Hello

  > They work fine in USB mode, but in eSATA, I get no response from the TECRA S10-128
  I was a little confused m
  As far as I know that the laptop supports the eSATA/USB combo port it s on the left and it conforms to the USB 2.0 standard.

  A (HDD) connected eSATA device cannot be recognized unless it s connected to the eSATA port, while the phone is in standby or standby.
  In this case, disconnect the eSATA device and reconnect it while the Tecra is turned on.
  Usually, it takes about 10 seconds until the eSATA device would be recognized by the laptop. Don t try to disconnect and reconnect the drive before this period has elapsed.

  In your case, I would check the BIOS settings.
  The second page of the BIOS provides eSATA settings. Check it out.

  I also recommend the installation of the OS switching device Configuration.
  This can be done as well in the BIOS

• Camileo H10 - White Balancing does not work

  I bought this recorder in December 2008. I tested some records inside, outside and I found, that White Balancing does not work.
  I can put it in automatic or manual, but all videos are little pink. Is this a firmware problem or is it a bad piece? Where can I get the new firmware?

  Thanks for the reply

  Hello Bunak

  Toshiba has released the new update and you can find it on Toshiba support and download page under http://eu.computers.toshiba-europe.com > support & downloads
  On the drivers download page please choose the criteria for follow-up:

  Product type options
  Family digital Imagin
  Range of digital video cameras
  Camileo H10 model
  OS operating system practice
  Type of driver Firmware update

  So here you can find the update to Firmware version 1.1. Last modification date is 12/02/08.

  In order to provide the best quality, update Firmware for Camileo H10 results with feature upgrade as follows him.

  1 give input MIC (improve the volume of MIC)
  2. set the focus window (improve the AF)
  3 tune AE to avoid exposure
  4 tune matrix color and saturation (performance of color)
  5. set the noise filter (improve the noise level)
  6. grant WB (improve the AWB)
  7 change the string from the user interface in CZ

  Here the steps how to upgrade the F/W (Firmware):

  First of all, there are two different language version of the UI (User Interface) of the EU & UK and EEMEA version. Please select the appropriate according to your language file instead.

  -EU & UK F/W version 1.1 include: English, Deutsch, Español, Português, Italiano and French, Dutch
  -EAST F/W version 1.1 include: English, Czech, Greek, Hungarian, Polish, Russian, Turkish, Slovak

  * Files of F/W 1.Copy to an SD card *.
  -Format SD card. Make sure that the FAT file system is selected before formatting.
  -Copy the F/W (zburnT_C10.run.elf and DCIM folder) files in the root directory of the SD card
  (PS: there is another folder and file in the DCIM folder, please, do not change the content of this)
  DCIM folder)

  * 2. Firmware Update (Please make sure of course he didn't is no battery inside the unit and the power adapter is not connected to the camera) *.
  -Open the Panel first
  -Insert the SD card which has the F/W files
  -Insert the battery (make sure that the battery is full), then plug the power adapter to the camera.
  -Press the shutter button when the message press shutter to update to start the update process. During the F/W update of the LED will keep flashing. Do not remove the battery or disconnect the AC adapter during this operation, otherwise the camera will be damaged.

  * 3. Update has been completed *.
  -The LED will stop flashing once the firmware update completed (Please make sure that the flashing stop light)
  -Restart the unit remove before adapter, the battery and the SD card in camera in order to avoid the firmware update again.
  -Upgrade of the F/W was over.

  Please follow these steps and let me know if everything is Ok now.

  Good luck!