Camileo S10 - HD (1080) video and Audio Out of sync

Similar Questions

• Video and Audio out of sync after rendering with SOUL

  I went videos of gameplay, with a fable for my microphone and one for the PC-ingamesound. After I visited with Premiere Pro 2015.4 all right.

  But with Media Encoder 2015.4 gameplay video is about 15 frames before the sound. I have an intro to 4 seconds, it is in sync, so I don't understand why the matter of gameplay GET is out of sync.

  When you need more information to help me, let me know.

  Hi Gunther, sorry you have problems with the SOUL.  Looks like the sync is correct when exporting directly from the first, is that correct?  Also, what format you export to SOUL & first?  The problem of synchronization occur even if you export to a different format of the SOUL?  You can try to revive the SOUL with the SHIFT key to reset your preferences, just to verify that the problem is not related to corrupt settings.

  If you agree with the sending of your first sequence and media I could study the problem more away from my hand, let me know and I'll send you a link.

• Video and audio out of sync

  I just got adobe cc and im already running questions. I imported a video that I want to work, but it will not sync. The video is perfectly fine when he plays in a drive but mess up as soon as I import it. Any ideas?

  There is a program called Handbrake that can convert audio & video... just to the time where the performer, some people raised upward of "keep audio in the original format" or something like that... that leaves the program to convert the video to the CFR, but leaves the audio VFR... not an improvement!

  Choose something like mp4 or pretty close... and keep the size of the frame & similar rates to the point of 'goal' of the original item.

  Handbrake download page: https://handbrake.fr/downloads.php

  Neil

• Video quality has dropped and Audio Out of sync (EPA 12)

  Edited a video of 30 minutes and took a few clips of him. After the project and saving it, I noticed a severe drop in video quality and despite to realign the tracks audio/video, audio installs always out of sync. Original video clip plays fine and I would just download those, but there are too many dead zones and some splicing that needs to be addressed. At first I cut sections of video caused the problem, but the video before editing it produced out of sync titles as well. on a 30 minute video, audio Animes before nearly 10 seconds.

  EPA 12 Windows 8.1.

  Video camera: Replay 720XD (manual specifies EPA or Quicktime [Pro] Edition)

  Video information by gspot: 29.412 FPS; Resolution 1280 x 720; Audio codec: MP4a:Mpeg - 4 AAC LC video: avc1 H.264/MPEG-4 AVC

  QuickTime is also updated.

  I was see several other discussions on this topic with different answers, which makes me think that every problem is something different. Also, there are not too many threads with solutions. Also concerned by the fact that this problem seems to go as far as 10 EPA.

  BadWolfRacing

  I see no mention of rate constant or variable in the documents of the camera (only 30/60 NTSC or PAL 25/50).

  The only clue that I don't have that cadence is variable, it is as 29.412 frames per second that you give to your video.

  I had advanced for the camera users section and can't find anything that goes with this question. If your camera records with a constant speed then you will see 29.97 or 30 and not 29.412.

  We support the idea of constant compared to variable rate for your video by running the video via the properties of MediaInfo program playback. If your video has a variable rate, reading on will give a minimum, 'general' and maximum playback for cadence.

  http://sourceforge.NET/projects/MediaInfo/

  Just be careful for carryons unwanted in the download of this program.

  You seem to have 1280 x 720 @ 29,412 progressive frames per second (variable frequency), presenting as AVCHD.mov. And apparently you transfer the recording to the camera as the video compression AVCHD (MPEG4 AVC/H.264).mov, not a "MPEG" such as MPEG2 video compression...

  Variable rate in first Elements = always no problem. I have the iPod video and iPhone 5 (with variable rate) and any import problems (audio out of sync or other), edition, exported from Premiere Elements set the correct project presets and work with content timeline made. There are some who have problems. For them, the answer is borrow the video in software to change the variable in a constant rate.

  Whether you use the original or the original converted to the hand brake

  The project preset

  NTSC

  AVCHD

  AVCHD LITE 720p30

  Export of QuickTime H.264.mov (720 p 30)

  Publish + share

  Computer

  QuickTIme

  with Presets = NTSC DV 16:9

  and, under the Advanced button/video settings tab, make sure that settings are as shown in the screenshot

  

  The transmission speed is cut in the screenshot. Leave it disabled for now. We can talk about Bitrate and file size later.

  Export for AVCHD AVCHD.mp4 (720 p 30)

  

  Please read the above and let us know if any information improved the situation.

  Any questions or need clarification, please ask.

  Thank you.

  RTA

  Add on... Just in the notes on the case... the publication + share/computer has more choices than Adobe Flash Video, MPEG and AVCHD. The need for rest to scroll to with the tiny scroll right bar. Or, you can click on Adobe Flash Video, so that the Panel will turn blue. Then use the down arrow key to move to the bottom of the list or the up arrow to move to the top of the list.

• Visuals and Audio Out of sync

  Hello

  We try to change some sequences HD, in which case the audio and video are out of sync.

  Plays ok as a MPEG4 file on the hard disk of the computer - problem only occurs when images are imported in the first Pro CS4.  We import via the media browser.

  The problem worsens as he plays for example at the end of a 49 minutes 9 seconds audio offset.

  I read this thread, but it didn't really explain what is the cause...

  http://forums.Adobe.com/thread/436751?TSTART=30

  Here are the specifications of the sequence...

  Path: C:\Users\Administrator\My Videos\Coast10_videomaster\Nora 2 day day 1 Vp1
  Type: MPEG Movie
  File size: 10.8 GB
  Image size: 1440 x 1080
  Sampling: 32
  Frame rate: 25.00
  Audio Format: 48000 Hz - compressed - stereo
  Project Audio Format: 48000 Hz - 32 bit floating point - stereo
  Total time: 00:59:01:08
  Average: 3.1 MB/second
  Format of the pixels: 1.3333

  One wonders about the Audio Source being Format and Format Audio different project for example compressed / comma floating 32 bits?

  Someone suggested to syncronise?  but from what I can tell, it is only useful for multiple clips?

  One of the local film tutors suggests that this is a problem with not having hdv cameras is not a video sync - time and it was the fault of cameras. Apparently the only way to move which was to capture in short clips instead of a jackpot.  Used camera is a Sony V1P.

  Comments are welcome... would be very appreciated!

  Use HDVSplit to capture HDV equipment. It of free, has the scene detection, and avoids the OOS errors.

• Re: All the videos and sounds out of sync

  I have problems playing all kinds of video to my computer, the sound will continue, but the video will lag, freeze and jump. It happens with all programs, I play a video, not only the windows media player, it happens even with youtube videos is not a matter of program.

  Is someone can you please tell me what I can do? I already lowered my display settings so that I now have the basic theme of windows 7 and not the aero theme.
  Nothing seems to work, my laptop as a whole began to deteriorate quite rapidly recently.

  Thanks in advance

  > I have problems to read any kind of video on my computer
  And what Toshiba laptop do you have?
  What operating system do you use?
  The same happens when you use DVD movies?

  Try please test it with VLC player.

• PSE video and audio go out of sync on finished product

  A very strange problem has developed.  I have a PRE project that plays perfectly into the program itself, but when I exit the project start audio and video in sync but go not synced to the first place where the audio and video clips are spliced.  To be precise, I have a file mp4 audio (.m4a) synchronized with a .mov file.  At the first break, where I spliced m4a, m4a and .mov to .mov, the project is in phase when I play in the video window of PRE.  But when I have the project output, video and audio go out of sync at the first break.  Other facts:

  • PC, 8 GB of RAM, W7, all installed updates.
  • By using the same file .prel about a month ago, it worked well.  (I tried to do a DVD extra of this project, when the problem came.) The only thing related to the video that changed on my machine was a new version of Studio of GoPro.  Just in case, I uninstalled from my computer and the problem of PRE is still there.  Could GoPro have left something it's messing things up?
  • In this case independent of the output - DVD, mp4 format, etc.
  • If I insert an empty picture at the junction stay video/audio synchronized until the next splice point, when he goes back out of sync.
  • It happened first in PRE9, but I also PRE13 (who reads the PRE9 files) and the problem happening there too, in the same way.

  I am completely puzzled, especially because this same project file perfectly synchronized DVD in the past produced.  Any suggestions will be appreciated.

  R.H.L.

  Thanks for the clarification of your question.

  Complexion all the case is if this problem is limited to a single specific project file.

  Here's what I read since you wrote...

  You say that your audio synchronized to export this file in a project is present for Premiere Elements 9.0/9.0.1 and elements 13/13.1 first.

  These programs do not seem to share/use the same built in programming of the export. And, further, you say that there is this audio desynchronization if burn disk or export the file to one of these versions at this time. Is this correct?

  Even if the problem is not manifest prior to export, which has been described above point to the project file. Have you changed anything in the project settings or export settings in this file of project for good time / wrong time - courses of transitions, component files software plug-in, flow? And you say that look very detailed to the timeline, the content of this one project has revealed no change before and now after? You write

  Would such a program have changed or are damaged?

  From what I just wrote, could the project file has been corrupted, but...

  If you want to look at this as a corruption of program, then you will need to take uninstall, cleaning, reinstall to 9.0/9.0.1 and 13 to dismiss this idea and replace any missing files of exporting program. But, once again, we are dealing with a single project or all your projects with this problem.

  Please consider.

  Thank you.

  RTA

• Export (in the format H.264 HD 720 p 23.976 preset) and audio out separate while the video file is a file instead of .mp4 .m4v

  With the help of the first Pro CC 2014.

  Export (in the format H.264 HD 720 p 23.976 preset) and audio out separate while the video file is a .m4v instead of .mp4 file.

  Anyone know why audio and video export separately? I can't understand why. Help is very appreciated.

  Are you sure that you choose a preset of Blu - ray? This will create separate assets. Thanks for posting a screenshot of your export settings if you can - which is usually much enough quickly

  Thank you

  Jeff Pulera

  Safe Harbor computers

• What is a module secure to download youtube video and audio, something, virus and malware free?

  What is a module secure to download youtube video and audio, something, virus and malware free?

  We are not really discussing comparisons add-on here, but note all formally welcomed the module extensions hosted on addons.mozilla.org and available from the will of the User Interface of Firefox were considered and be safe, secure and virus-free.

  • Use the Menu button-> Add-ons-> [search all add-ons]
    (Or key in the address bar Subject: addons)
  • Search example (you can do a targeted search the better your own machine)
    • With > 5 M high to the users of the list is Video DownloadHelper

  NB. There may be legal as possible & /or copyright with downloading some documents issues, but this is out of scope of this support forum discussion.

• Audio Out of Sync and Insert Clip out of a framework

  I record my audio and video separately. I use the merge Clips feature to merge together, now made dozens of times, never a problem. He did it with this new project, everything looks and sounds very good.

  But when you change the pieces of an element in a sequence, each inserted bit is the "audio is out of sych" red text. It is out-of - 0:72 to a clip or - 0:87 for another.

  However, it is not enough for me to see when I play it back, so I did fi from it as I change. Sometimes I slip in sync to remove the red text, I can't make a difference.

  But also sometimes when I insert an element in the current sequence, the marker/cursor script (don't know what it's called, the line blue large marking this place in the sequence where everything I insert will be inserted) is disabled by a frame. Sometimes it's off in one direction, which means that I get random empty images in playback, or it is off in the other direction and I am slowly accumulated unique axe off executives.

  Someone has an idea of what's going on? How the audio is out of sync in the first place? Why the function Insert Clip move the cursor in a strange place?

  Nevermind, I figured it. I chose the wrong preset when I made a new sequence. 60 frames per second instead of 59.whatever. >.

  Thanks to reddit for the answer: Audio Out of Sync and Insert Clip Off By A Frame: first

• By aligning multiple video and Audio tracks

  I am a multi-instrumentalist and worked on videos of my songs.  I save in Adobe Audition CC.  I've usually will start to record the audio/video with my Nikon D3200 as well as with studio microphones that record in Adobe Audition.  I add then several tracks on this track main video/audio recording to play the electric bass, banjo, mandolin, and percussion etc.  I mix all the tracks and send video clips to make a video in Premiere Pro.  I found that the main (usually guitar track) syncs perfectly with the video camera that I put in the calendar when you use the synchronization in the first feature.  From what I've read, if it is only possible to do this with a video and audio track.  I need to find a way to be able to align the other video sequences with the main audio.  Does anyone have a workflow that make this process easier for me?  Is there a way to do what I'm maybe missing out on Premiere Pro?   Please help me if I can continue the creative process!

  This is an example of what I'm doing https://www.instagram.com/p/-snqVSwzft

  I had to align that laboriously trying to watch the movement of the hand, but there must be an easier way.

  Audio and video synchronization begins to shoot and carries through to the edit and mix.

  Create sync audio and video synch and they will line up in the chronology of the edition.

  A simple way for you to do is a snap of the hand or a tap pronounced on the handle.

  Pro is use timecode in photo and audio recording device.

  Click on the titles and click count-ins are useful for musicians when more dubbing and overlay track.

  Its nice also.

• Audio out of sync and missing

  I have several clips of my Panasonic LX-5 (720 p). I created a new project (CS 5.5) and import the clips. When I play the file directly from Windows Explorer, all right. However, in the timeline, the audio is ahead of the video, then partially through an element, the audio disappears altogether. In addition, the line in the upper part of the sequence is yellow (above the transitions, it is green). I thought that perhaps the final exported file would be nice, but he had the audio out of sync and missing in the same places, too.

  Any ideas what's happening here?

  Thank you

  Jay

  Thanks for the offer, Jim. It turns out that, delete the files from the cache of forced media audio again in line (as when a fall new video clips in the bin in a project). That fixed it.

• Premiere Pro 2.0 compatible video and audio formats

  I'm working on a project that uses old clips newreel vintage and such of the 1950s and 60's, they are available for download in different formats.

  I downloaded many of them, but when I import into my calendar, there is no audio for these clips. They work when I play them just out of first. What are the supported formats for first pro 2 in video and audio?

  I did several films but did not come about this before.

  Welcome to the forums.

  The following links will help:

  FAQ: How to import files to the format xyz?

  Can FAQ:how I convert my files?

  FAQ:why are there no sound in my imported MPEG file?

  See you soon
  Eddie

• I want to install firefox addon called "youtube video and audio downloader 0.3.5 by Chris. How can I check to see if it has malware

  How can I check if the program 'youtube downloader video and audio by Chris 0.3.5 has malicious software.
  When I go to download it has chain
  https://addons.Mozilla.org/Firefox/downloads/latest/413644/addon-413644-latest.xpi?src=userprofile

  I'm so nervous about downloading anything for fear of getting my hijacked browser or worse, because it's already happened twice. Any advice on this program or if there is a similar program to download youtube, who is known to be squeaky clean?

  Too, I have youtube downloader video and audio 0.3.5 by Chris on FF but have not used a lot or not at all. Today, Avast gave me a warning (probably a Malware DB recent update) that this product has very bad side. My two main concerns are a possible Trojan and adware popups - horse for now that I only have those on a single site, The Pirate Bay, but they are devilishly difficult to get rid of.

  Avast and some other malware utilities not come with Trojan horses, but I saw a EULA (on Board of another, may not be the same product) which explicitly stated the software would share information on the internet, probably tunnel through the firewall. Malware utilitie which would detect as a Trojan horse, or that they would assume that I installed it intentionally? How do they know?

  Are modules which arise on the FF Add-ons Manager > get guaranteed by Mozilla addons?

• I have synced clips successful but video and audio are not visible until it is developed to the timeline. Returned results completely black film without sound. Any tips?

  I have synced clips successful but video and audio are not visible until it is developed to the timeline. Returned results completely black film without sound. Any tips?

  Please give as much information as possible on your support. The video and audio works in QuickTime player? What are the specifications of media?