Camileo S10 - record 16: 9 FULL HD

I have the same problem with a friend * rodarko * ([m-169634]). I saw that his thread, but no one since now you have a solution. I will try to describe my exact problem.

When I record in 16:9 full HD, everything looks ok. But when I try to play on my computer with Arcsoft drive, some files are read 16:9 and other 4:3 are played.

I did a lot of tryies, but the only thing I found out, it's usually files that may not work on the 16:9 format, the first 5 I save. So, if I save 4 or 5 or 6 (I don't know why) the files, then the following files can be played on 16:9.
This is not happens all the time. My camera is Camileo S10 and my Kingston 8 GB HC card (SD6 / 8GB).
I do not wanter why TOSHIBA didn't find any solution and of course I do not wanter why they put the following message (this thread is locked - replies are not allowed). on the same response from the user rodarko!

Sort it please if you know anything give me an answer. Thank you

Hello Boisvert,

I am also a user of the S10. I've done 10 movies in Full HD and watched them then on my laptop.
All movie files were held in the same format (4:3).
I recorded in 'normal' and 'macro' - mode, with a SD and SDHC-card and there is no difference.
I played the files with the player and Arcsoft with VLC Player and both played all files in 4:3.

Were done, you've played your files? On the screen of a laptop or screen connected to the computer (DVI, VGA or HDMI)?
Have you tried to read files with another player (VLC or something else)?

Best regards

Tags: Toshiba

Similar Questions

  • Camileo S10 records recording in AVI format

    Hi from Spain,

    I just got my Camileo S10 purchased from an online retailer.
    I chose the S10 because everywhere on the web, nobody said that it records. Files MOV, which is perfect for me because I'm ready to modify the records on my Mac with iMovie.

    First test: I have recorded a few clips on SD card and memory of the internet and watch them on my TV. High quality, nothing to say so far.
    I have then connect the S10 to my Mac using the USB cable and discover that all the files are. AVI and not. MOV, as all the world seems to have.

    It plays fine with VLC, but iMovie does not recognize one of these files.
    I don't want to convert AVI to MOV, because it is a gift for my wife and she wants something simple.

    Y at - it an option or a firmware available to change this?
    It's very strange... Read all the forums and comments on the net, it seems that everyone is looking for a way to save in all but. MOV

    I need an answer to whether or not I'm send the S10...
    Thanks for your help.

    Hi mate

    Are you sure it s a .avi format?

    I downloaded the manual for this camcorder S10 and the page 42 says that the camcorder support these file formats:
    Photo: JPG
    * Movie: MOV *.

    It seems that the MOV format is supported
    Maybe you should check all the settings!

  • Camileo S10 freeze everytime I try to record videos

    I just bought the Camileo S10 and it does everything just for me. Everytime I try to record video, it freezes just straight up. All the buttons are non-functional, and the only way to turn it off, is to remove the battery!

    I tried it without any SD card in it, with a 4 GB Kingston and a Kingston 512 MB. Nothing works!

    All the great ideas for this problem?

    Hey Buddy,

    I m really been wondering about this. I can't believe t such a question on my TV camera.

    Have you checked the Web from Toshiba site for an update of the firmware? If this is not the case to do this and install this update if it s is available.

    If not, contact a service provider authorized in your country. Guys can check your camera and try to help you.

  • Camileo S10 - to record a movie without screen flipping?

    I would like to know if it is possible to record a movie with Toshiba Camileo S10 without flipping screen?

    Hello

    What do you mean exactly by without screen flipping?
    Do you want to save the movies upside down or what?

    Could you explain what you want to do or post more details?

  • Cannot store basic Camileo S10 and P30 configurations

    Hello, first post for me. I got a Camileo S10 and changed with a Camileo P30, and on the two camera, I can't record some basic configurations. I have to put every time that use of the camera. By example, if I activate the stabilizer in 720 p, at a filming of a video, as someone close to the camera, 5 min later I have to ashoot another video, I always have to go into the settings and re-setup stabilizing, because this setting are not stored, while the 720 p stay stored configuration. Same thing for the photo shoot, where of the light conditions and so on must be set each time. It's very annoying, and I can't ask my son to not to move to get a picture, if everytime I open the camera I have to redo the configurations... I'm doing something wrong here? Is there a way to save configurations, as in most normal and camcorder camera?

    Thank you very much

    Lillo

    Hello

    I contacted my friend because he has the same cam. I ve asked him to check this.

    He told me that this stabilization can be used in HD recording and it can be used by the registration with a lower resolution only.
    Another thing:
    Did you put the battery inside and full load?
    What's with the time and data? Is always shown the right one?

  • Camileo S10 erases all images

    Hello.
    When a select erase an image, the device clears all photos. He has been twice, so I think that something is wrong in the firmware!
    y at - it an update of the firmware of our Camileo S10?
    Concerning

    Hello

    I didn t find updates the firmware on page Toshiba unlike any new firmware has been released for the Camileo S10.

    But are you sure you used a proper procedure to remove the single movie?
    The user manual says:

    (1) use up/down to select the delete option
    (2) button press OK to get the Delete menu
    (3) use the left/right keys to select the movie
    (4) use button to delete all the films or the down button to remove the unique animation. OR the record/play button to exit
    (5) before the film is deleted, a confirmation screen will appear
    (6) button press OK to validate the setting

    Note: If a memory card is inserted, you can delete only the movies stored on the card
    Movies on a map written protected memory cannot be deleted!
    The function delete erases only unlocked movies. Locked movies must be released before it will be deleted!

  • Camileo S10 does not

    Hello

    last week, I found my old camileo s10 that I him have not used for a year or two, so I guess the battery was completely dead and unusable.

    However I found a charger that has mounted the camcorder, it may not have been that which is expected but when it is plugged into an outlet an orange light appears around the record button.

    However, after charging for two days in a row, the camcorder appears not functional even if the orange light remains constant when charging.

    If anyone can offer a solution to this problem, or is my camcorder simply dysfunctional because of the long period of unused remaining time? Thanks for any help.

    I put t see many options here

    If the battery is OK, it should be possible to load.
    The camcorder must be decommissioned: flashing light confirms the load, but the light is constant when the load was over.

    In your case, it might be possible that the battery is defective and, therefore, it of not possible to load.
    Maybe you should try the new battery

  • Problem loading Camileo S10

    Hi all users of Toshiba!

    I just bought a camera, Camileo S10, and it seems apretty nice, small and light. But he does not seem to charge the battery, or power on. Here's how I did:

    (1) I removed the insulation of the battery and put it again, the closure case.
    (2) I plugged it with its own charger, using the USB connector.
    (3) the LED ring around the "Record" button will light up (but flashes as stated in the manual).
    (4) when 5 minutes pass, the LED turns off and never turns on again.

    Is this a normal behavior? Because when I try to turn on the camera, there simply nothing. I tried to reverse the LCD and also tried with the power button, with unplugged USB charger. Device does not react. When I turn on with charger plugged works correctly.

    Thanks for your help!

    Post edited by: m0sk4

    Hello

    The new battery is completely empty!
    Therefore, you must leave the battery connected to the power supply for a long time.

    In addition computer will not charge the battery when it is connected. You should ONLY use the provided AC charger! Camcorder must be decommissioned; flashing light confirms the load but the light is constant when the load was over!

  • Camileo S10 clicks in sound and in drops in volume

    Hello

    Yesterday, I bought the Toshiba Camileo S10 camcorder.
    Everything seems to work fine apart from the sound which is unacceptable.

    Here's the problem:

    I record a video on playback on my computer the pop sound every now and then randomly and enjoys different each time (left and right) speakers, the sound becomes weak and then returns to its original volume. As it is limited in some way but with a very fast attack that causes artifacts.

    This happens in all the videos I shot and what worries me the most, is that I saw a lot of S10 videos on youtube that have exactly the same problem with the sound.

    One example is this video:

    http://www.YouTube.com/watch?v=JDKo_bI4Qso&feature=related

    Notice how the sound get clicky and drops in volume at random in the left or right channel.

    Please let me know if there is a way to avoid this, as it clearly seems to be a common symptom of the S10. If there is no way to avoid it would certainly go back there. Audio quality is simply unacceptable. Even my mobile phone has the best sound quality. I don't really like the quality it's clicks and drops in the volume which concern me.

    Thank you in advance.

    Hello

    One of my friends owns a Camileo camcorder and I have a Camielo Pro camcorder as well.
    I recorded a lot of videos and to be honest I didn t notice all her questions.
    The sound was recorded correctly.

    Of course, I could edit movies recorded using some video editing applications.
    I m using Nero and some plug-ins to create a movie and burn it on CD or DVD.

    So if you really have problems during video recording you must contact an ASP for a check.

  • Camileo S10 - Arcsoft doesn't recognize not all files on SD card and internal memory

    I just bought a Camileo s10 camcoder.
    So far, I was pleased with the product until I connected it to my pc (vista compatible with recommendations).

    I installed the Arcsoft software, but I've never had any file import because * the program recognized the sd and internal memory as void * (I could read the files in the drive of the camera, as well as my pc card reader).

    I have used other similar suites with no luck. Then I tried to format sd hc 8 GB card and restore my files but unfortunately I noticed * video/foto files not recognized at the time, even from the camera *.

    Another concern is that I had a trailer (720 p) hd .mov file in my memory card and the camera could not see (+ I wanted to use the camcorder as a player HD plugged into my sony full hd tv +).

    I looked for answers almost anywhere, but so far I have had no response

    Hello nikfam,

    I also have a S10 Camielo, installed the software Arcsoft on Windows Vista and I am able to see images and mov files if I connect the cam via usb cable or if I insert the sd card into the card reader.
    He shows me the internal memory and the data stored on the card (Class6) 8 GB SDHC.

    Maybe you need a card with a higher class. Where did you try to format the sd card? On the inside of the camera or on your pc?
    Please take a look at the right format.

    Have you tried another usb port? If you use a hub, check that there is enough power.
    I downloaded both trailers 720 p and saved on my sd card but my S10 couldn t see too.

    welcome them

  • Camileo S10 - how to avoid the 'information' during video playback on TV

    I just received my Camileo S10... very nice indeed... but how to avoid the track and reading data to be shown on the screen during playback on my TV...?

    Go to the movies, then before you start playing click the OK button. This also works when you save. You must do this before playing or recording.

  • Camileo S10 on OSX

    Hi I just bought a Camileo S10. I used the week last on my vacation and now I tried to connect it to my Apple with an OSX 10.5.6 system on it.
    I have a program of crossover on mac and I installed your ArcSoft software provided with the Camileo S10.
    Everything worked fine but when I connect the camera to the mac he does not see the camera. The computer does not see the camera, but it shows that there are present volumes. Even if I take the card our and place it in a card reader, it does not work. the card is full, but the content cannot be read.
    can someone help me with this problem?

    help is appreciated...

    Drago
    Switzerland

    > Hi there, I also bought the TV and ' I'm trying to use it with Mac, currently the cd will not install, so any help and advice would be welcome! Thanks Fran!

    As much as I know the software/driver that comes with the Camileo camcorder is only compatible with Windows OS.
    If you use MAC OS, then you will not be able to install the software.

  • How to set permanent stabilization in Camileo S10

    Hi all!

    I would like to know, how to set permanently stabilization in Camileo S10.

    Thank you.

    Hello

    If you are in the record menu press the OK button.
    In the video mode menu, you must change the stabilization of off to on. Then press the OK key to validate the settings.

    But don t forget the support of stabilization doesn t HD (1080 p) and WVGA (60 fps).

    Welcome them

  • Camileo S10 camera does not remember the setting of the image stabilizer

    Hello reader Forum,.

    Is it normal that my Camileo S10 camera does not remember setting image stabilizer?
    I use mostly the 720px setting and stabilizing on but after that the camera is off the stabilizer is off again.

    Greetzz... Ben

    Hello

    This could be possible.
    I remember that the focus does not work if the stabilization has been activated
    So maybe it of the intent of the manufacturer that the stabilizer would be disabled again.

    Welcome them

  • Improve the Camileo S10

    I bought last year a Camileo S10.

    There are two not good question.
    Light sensitivity: with plain day I work well, but with the clear desk light or unclear orrible. is it possible to upgrade?

    Optics: it is quite a narrow profile. Is there a possibility of change in a broad vision.

    Hello

    > Slight senility: ordinary day turns I work well, but with the office light or unclear orrible. is it possible to upgrade? Light of senility: with plain day I work well, but with light light desktop or little horrible light. is it possible to upgrade?

    Unfortunately, there is no upgrade to improve the sensitivity to light.

    But I must say that it is not a question of camcorder I put t know camcorders how much you had in the past or if you have experience in the use of these camcorders but fact is that all of the camcorders in this price range would produce excellent images in a bright environment. But you'll notice a kind of noise in dark rooms or the environment.

    If you want to get better picture in theaters, then you need to buy camcorders in the range of price superior > $700, but you still won't get the same quality as using the camcorder in a bright environment. So I don't know if the rise in prices would be furious if you do not use these cameras for profesional use...

    I have a S30 and it's good enough for holiday movies...

    Welcome them

Maybe you are looking for