Can a Compac Presario CQ-5500 process data of a HDXC memory card.

Similar Questions

• Cannot read the data in the Micro memory card reader

  Original title: Micro memory card reader

  When I plugged in my card reader to the USB port windows says that the device has been installed and ready, but my pictures came not, where should I go to find them. Am I missing something?

  Hello

  1. What happens when you connect the card reader to a different USB port?
  2. Are you able to see the pictures when connected to another computer?

  I suggest you save that data if it works on another computer and then try to format the card reader to the NTFS file system

  How to get in shape?

  1. open computer management by clicking the Start button, click on the Control Panel, clicking system and Maintenance, clicking Administrative Tools, and then double-click computer management.  If you are prompted for an administrator password or a confirmation, type the password or provide confirmation.

  2. in the Navigation pane, under storage, click Disk Management.

  3. right click on the volume that you want to format and then click on format.

  4. to format the volume with the default settings, in the dialog box format, click OK, and then click OK again.

• How can I foremat my camera(1gb) xd picture memory card?

  How can I foremat my camera(1gb) xd Picture memory card? -Ive tried to use a card reader - but only managed to transfer the photos I had taken to myPC - also tried to forematt with a USB cable direct from the camera to the PC - is still no luck - message I get always after I try to foremat card - WINDOWS can NOT COMPLETE FOREMATT
  Thank you

  I BOUGHT A NEW MEMORY CARD AND IT WORKS VERY WELL - THERE WAS SOMETHING WRONG WITH THE OLD! -THANKS TO EVERYONE TRYING TO HELP!

• Can I run win7 on a compac presario re468aa

  Can I run win7 on a compac presario re468aa computer

  According to the following specifications:

  COMPAQ Presario SR2013WM (RE468AS) Desktop PC Athlon 3800 + 512 MB DDR2 160 GB HDD capacity NVIDIA GeForce 6150 LE Windows XP

  You need to update to a minimum 2 GB RAM to comfortably run Windows 7.

  System requirements:

  * 1 gigahertz (GHz) or faster 32-bit (x 86) or 64-bit (x 64) processor

  * 1 gigabyte (GB) of RAM (32-bit) or 2 GB RAM (64-bit)

  * 16 GB of disk space available (32-bit) or 20 GB (64-bit)

  * Peripheral figure DirectX 9 with WDDM 1.0 or higher driver

  ---------------------

  The upgrade to Windows XP?

  Please read these instructions carefully and completely before you begin installing Windows 7: there are important steps that you must follow to upgrade your PC from Windows XP to Windows 7 in order to preserve your files and settings.

  Before you begin, you'll need to backup all your data to an external storage device, and you will need all the installation discs for the programs that you want to keep. Please make sure that you have an external hard drive (see details below).

  More detailed instructions are available at windows.microsoft.com/upgrade-windows-xp. Here are the basic steps.

  1. start Windows Upgrade Advisor (windows.microsoft.com/upgradeadvisor) to see if there are known issues that may affect the installation and the question of whether you should install the version of 32 or 64 bit Windows 7.

  2 back up your files and settings on an external hard drive using Windows Easy Transfer (windows.microsoft.com/windows-easy-transfer). If you do not have an external hard drive, you will not be able to use Windows Easy Transfer. Alternatively, you can copy the files you want to keep on a USB stick, CD or DVD.

  3. you will need to manually reinstall your programs, such as Microsoft Office, after I installed Windows 7. Gather the installation for your programs and all partner/license product key discs. You may be able to download programs from the Internet. For example, Windows Live Messenger can be installed from the download.live.com/messenger.

  4. Insert the Windows 7 DVD in your PC. When asked "which type of installation you want. Click on "Custom (advanced)."

  5. when Windows 7 is installed, use Windows Easy Transfer to restore your files and settings.

  If you are not comfortable Windows 7 installation, check with a local retail or the services of the PC company store to see if they offer upgrade services.

  http://www.notebooks.com/2009/10/13/WinXP-to-Win7/

• Compac Presario VN457AA: upgrade memory

  Please help me!

  Is it possible to upgrade my Compac Presario mod.no. VN457AA 2 x 2048 MB DDR3 SD ram 2 x 4 096 MB DDR3?

  There are only 2 memory slots.

  It is very slow

  OSHDK

  OSHDK, welcome to the forum.

  You have the maximum amount of memory installed.  However, you can perform a system recovery:

  http://support.HP.com/us-en/product/Compaq-Presario-CQ5200-desktop-PC-series/3999467/model/4048603/how-to

  This will return your computer in its original configuration to increase the performance of the system.  Installing and uninstalling programs leave remnants of them, which, over time, will begin to slow down the computer.  Must make a backup of your personal data before you start.

  Please click on the Thumbs up button '+' if I helped you and click on "Accept as Solution" If your problem is resolved.

• COMPAC PRESARIO CQ 57: MISSING WEBCAM

  Preinstalled HP compac presario cq 57, webcam windows 10 (from 7) missing, now have webcam 7 installed, not the same smaller image size and not the effects menu. How can I reinstall? NO TRACE SHOWN ON THE SEARCH, IS POSSIBLE FOR HP TO TAKE CONTROL OF THIS MODEL [UTOR AND RE INSTALL. FEAR RATHER COMPUTOR ILLITERATE.

  Try to update the Webcam drivers.

  GoTo Settinges to start menu > security update and then check the updates, I hope it will solve the problem...!

• Compac presario CQ62 wireless adapter disconnects frequently

  My laptop compac presario CQ62 wireless adapter disconnects frequently while I'm online. y at - it a driver update that will help solve this problem?

  Hello

  Thanks for providing this information.

  I would like that go you to this link: drivers PC laptop Compaq Presario CQ62-421NR. Once here use the "scan now" under the control of the updates. This will scan your laptop all the updates that are available. If you see something that indicates wireless, make sure that this update is complete.

  The other option to do this: go to the Device Manager (start type in search Device Manager), under network adapters, you should see the wireless card. Make a note of it (it must be a brand name) so that you can reply back with it. You can then right click on it and try to update directly from the driver.

  If neither help in updating the wireless, please answer back with card network information. In addition, the operating system that is currently installed on the laptop.

  Thanks for your reply.

• problem with my HP compac presario CQ42 laptop (32 bit, XP)

  My HP compac presario CQ42 PORTABLE (32-bit, XP) show this massage:-

  Smart disk error
  INTELLIGENT drive control has detected an imminent Doctor. To ensure no loss of data, please backup the content immediately and run the system diagnostics hard drive Test.
  Hard drive 1 (301)
  The F2 System Diagnostics

  Please tell me how I do?
  Enter - consider starting

  Hello

  Please use this post:

  http://h30434.www3.HP.com/T5/forums/replypage/Board-ID/general/message-ID/54154

  Thank you.

• Compac Presario CQ57-229WM: failure of Compac Presario CQ57-229WM Memory Module

  Compac Presario CQ57-229WM w / Windows 7

  I get the following text "Windows has recovered from an unexpected shutdown. A problem caused Windows to stop working correctly. Windows will notify you if a solution is available. »

  Followed by a crash dump

  Verification of results in the readers:

  Drive hard test Passed

  HDD SMART Passed

  Module memory failed

  1 732 608 bytes of memory tested system OK

  Fault memory test

  Any help would be greatly appreciated.

  One or maybe two sticks of memory failed. If it's not very common to have two fail - it wouldn't be a bad idea to replace both if you can afford it. You could also spend 4 GB of the 2 GB, you have now.

  Crucial is always a reliable source of memory and they have single sticks or a set. Click on 'Show memory more compatible upgrades' under the memory listed to see the simple sticks and sets:

  http://www.crucial.com/USA/en/compatible-upgrade-for/HP-Compaq/Presario-cq57-229wm

  You can remove a memory stick at a time and run the test to determine if one or both is a failure. Your interview Guide & shows how remove and replace memory:

  http://support.HP.com/us-en/product/Compaq-Presario-CQ57-200-notebook-PC-series/5091489/model/5111956/manuals?lang=en&cc=us

• Presario A916NR: Vista OS 32 - bit compac presario A916NR

  I've lost 32-bit operating system Vista compac presario A916NR I have the product key but no software cd

  Hello

  You can always order the part on the following link - use the 3rd dealer recovery disks of these, BONE will be activated automatically via the slic table in bios and the security certificate onboard.

  http://www.computersurgeons.com/p-15598-recovery-kit-466252-001-for-Compaq-model-number-a916nr.aspx

  Kind regards

  DP - K

• Problem finding drivers for Compac Presario CQ5210be

  Hey,.

  I'm looking for drivers for my Compac Presario CQ5210be but HP doesn't support it not lonnger.

  So my question is if anyone can help me?

  Best regards

  Vegeetje

  I asked that someone from HP to see this. It should be fixed quickly and your Support page appears if you click on "Support" at the top of this page and you put in your model...

  If it is not fixed in the coming days please post to draw attention to your problem and I will ask you once again.

• Files corrupted win 7; can I fix it without losing any data?

  I have a HPp7 - 1137c.  6gig ram.  Win7.  I corrupted files win 7; can I fix it without losing any data?

  Hello:

  I don't know why some programs that you have installed have disappeared after the repair process.

  Yes, the method of reinstalling windows without losing files is correct as long as you don't let windows not delete or format the partition.

  What happens is that it creates a Windows.old folder and you can copy all your files from windows.old to the new facility.

  However, you will need to reinstall all your programs, because there will be only a simplified version of Windows 7 installed with no program.

  This is the method I use (I still have my files backed up just in case), but it's so easy to go in the windows.old folder and transfer my files and internet favorite folders from the windows.old folder to the new installation of windows.

• Can I create partitions without losing my data?

  I use Windows 7 Home Basic 32 bit, I have only a primary partition, IE. « C ». I want to install Windows 8 and also want to use Windows 7 at the same time, for this I need and separate partition. can I do in 'C' partition without data loss? and if I can, how? Help, please!

  You can.  But back up all your data first!  This process is a dangerous process and the smallest slip could erase your entire hard drive.  You have been warned.

  Now, that being said,.

  (1) open disk management

  (2) right click on your C drive in the chart and "reduce" the volume

  (3) right-click the now empty space and create a new volume he

  (4) click the new volume, and then format. Give it a name that you will recognize as "Win8" or something

  (5) boot from your installation Windows 8 media and choose install this new partition on

• Control of process data HFM

  Hello

  I use HFM 11.1.2.3 requests. I have a question about the control of process data HFM.

  For example, Japan entity has 3 Level0 member (A, B, C). I would like to present the data for only two members (A and B). Is it possible to start the process to ensure that the members of A and B. I want to ignore C member.

  I've known of all members of the child must be at the same level to promote at the level of the examination. But I need to know if there are no opportunities.

  Thank you

  Michel k

  Yes, you can start only A and B, but when you are finished with your consolidation and want to submit, to publish and to lock the parent (Japan) entity, you will also need to submit, to publish and to lock the C entity (for example, disabling his account of validation)

• Install PT8.53 with Linux question: connection process Data Mover and application designer

  People,

  Hello. I install PeopleTools 8,53 Internet Architecture.

  Server database is the database Oracle 11 GR 1 material.

  Operating system is Oracle Linux 5.

  I installed successfully JDK7, WebLogic Tuxedo 11 GR 1 material and PeopleTools 8,53 10.3.6, in Oracle Linux 5.

  
  I've been setting up of database PeopleTools8.53. Because the Wizard installation problem, I created PeopleTools 8,53 database manually by using starter PT853 Oracle database instance. I have run the following scripts:
  (1) utlspace.sql
  (2) dbowner.sql
  (3) ptddl.sql
  (4) psadmin.sql
  (5) psroles.sql
  (6) connect.sql

  
  Then, we perform Data Mover script in a Windows XP Client computer to fill the PeopleTools PT853 database machine Linux Sever instance.

  I installed Oracle Database 11 g 2 client for 32-bit Windows XP 64 - bit Windows virtual machine and run it successfully.

  In Oracle Linux 5 Server Machine Net Manager:

  Service name: PT853
  Connection type: default database
  "TCP/IP Protocol".
  Host name: 192.168.196.102
  Port name: 1521

  Listener: LISTENER
  Protocol: TCP/IP
  Host: 192.168.196.102
  Port: 1521

  
  I test the Service PT853 with "SYSADM" username and password "SYSADM". The connection is successful.

  In the Windows XP Client computer, the information in the Net Manager is the same, and the connection is successful as well. Its details are as below:

  
  NET Service Name: PT853
  Protocol: TCP/IP
  The host of the database Machine name: 192.168.196.102
  Port number: 1521
  Name of the Basic Service: PT853
  Connection type: default database

  
  This means that Windows XP can connect to Oracle Linux 5 successfully. But in the computer Windows XP Client, Data Mover and application designer cannot open a session in PT853 Instance of database in the Linux Server machine. Its details are below:

  Configuration manager:
  Type of database: Oracle
  The database name: PT853
  User ID: SYSADM
  Connect ID: people
  Connect password: people

  Data Mover:
  Type of database: Oracle
  User ID: SYSADM
  Password: SYSADM

  Application Designer:
  Type of database: Oracle
  User ID: SYSADM
  Password: SYSADM

  When connect Data Mover and application designer, I got the same error:

  ORA - 12154:TNS: can not resolve the connect identifier specified. Invalid user ID and password for the access code.

  According to my understanding, process connection Data Mover and the application designer requires 3 tables in SQL Server: PSOPRDEFN, PSACCESSPRFL, PSSTATUS. I'm not sure the process of connecting to the Oracle database. I checked the database PT853 instance in Linux, and there is only one table "PSDBOWNER" created by the scripts.

  My question is:

  Can any folk tell me the connection process Data Mover and Oracle database application designer? Requires only one table "PSDBOWNER"?

  Thank you.

  Oh my, many mistakes action here. If PSDBOWNER doesn't have a line, it must be solved at the time that the error came out. The replacement by SYSADM first why? Why is complaining already existing SYSADM? Most likely, you HAVE created manually, where you shouldn't.

  Again and again the same story. And again, sorry to say but you should take the basics of Linux training, Oracle training bases and sorry to be hard but reading training as well to read correctly the Peopletools Installation Guide where all required steps are really described in details.

  I don't think anyone can help you across the network in this respect,

  Nicolas.