Unfortunately, a card can be added to your desktop PC.

You can buy a usb converter to 1394, which should meet your needs for firewire.

Best regards

Tags: HP Desktops

Similar Questions

  • In the case of Facebook I control-click on Add Image to Photos, where Photos can I find the image being added?

    On Facebook I Ctrl-click on a photo and then choose picture add pictures on the shortcut menu.  Subsequently, photos where I can find the image added?  Is there a systematic way?

    Sometimes, images from Facebook are added at the end of my table of Photos.  This table is always keep sort by oldest first.  However, some images from Facebook appear to come from the previous dates.  At least one, I found a photo added to Facebook in the middle of a time at which the additional picture has nothing to do.  My guess is the added photo's date time whereby it sorts here and pictures imported, nor others currently have location data.  If any location data would show that the imported photo was not present.

    I imported several other photos from Facebook, which I can't find.  I think I checked the album last import and did not find them here.  I suspect they have dates, which I do not know, and causing them to be placed somewhere other than the end of my library.

    How can I find the imported photos from Facebook?

    When you see a photo in Safari and ctrl + click or right-click, then use "Add photo", it will be added to the photo library without appearing in "last import.  It goes the same for adding photos of Mail in this way.

    But you can find the album "AllPhotos".  All new photos added this way should appear at the bottom of all the pictures, because this album is sorted by the date of the import session.

    If you see the photo added in the last import, control-click it or right click and select 'display in the Moment '.  This way you can find at the moment, it has been added to.

  • 1394 Firewire sound card is unable to be detected under Vista SP2


    I have an external sound card that connects to my laptop via Firewire 1394.  This device is not detected at all Windows Vista SP2.  When I plug the unit in and the power it upward, with external power supply because it's a 4 pin Cable, Windows does not show the device in the Device Manager.

    The 1394 controller is displayed in Device Manager correctly.

    I should add that I tested this sound card with my work laptop and it was found immediately under Windows XP.  Therefore, the cable and the sound card work.

    I tried the following without result:

    • Uninstalling the 1394 controller and let Windows find.
    • Definition of the registry key for the controller: EnumerateInactiveLink

    None of them worked.



    You can try the front steps and check if that resolves.

    Microsoft Answers Support Engineer

    If this post can help solve your problem, please click the 'Mark as answer' or 'Useful' at the top of this message. Marking a post as answer, or relatively useful, you help others find the answer more quickly.

  • How can I recharge my personal credit card, being a member of a family shared account?

    How can I recharge my personal credit card, being a member of a family shared account?

    You cannot, with the family share that only cards of the Organizer will be used (if you have a balance on your account that will be used for your purchases, if that card organizer will be charged)

  • Second FireWire PCMCIA card does not work on Satellite A110-178

    I tried to use the PCMCIA card as the second controller FireWire from different producers, but they can't take it.
    Sweex - PCMCIA Firewire kaart
    laptop computer en PCMCIA USB FireWire 1394 Combo CARDBUS

    I really need the second FireWire controller on my Toshiba Satellite A110-178.

    Thanks Ben


    The Satellite A110-178 PSAB0E supports a Cardbus 32-bit / PC - Card 16-bit slot and you can ONLY use cards PCMCIA type II

    Please do not forget that your PCMCIA firewire card supports hardware specifications listed above.
    If not; you will need to purchase another compatible!

    Best regards

  • FireWire 1394 camera problem

    Community salvation OR,.

    I want to use my guppy (FireWire 1394 connection) of Allied vision camera, but I came across a connection problem. I use this card FireWire (, but according to the installation, check, this card is properly installed.

    When I plugged the camera Vision Builder AI 2010 and it wouldn't recognize my camera so I went for the problem that I found at my material properties. When I go to the properties of the camera, he said: "this device does not start. (Code 10).

    I've been looking for a solution, but I'm not a genius when it comes to this. So is there maybe someone who can help me with this problem.



    Here's an update after a whole day looking for a solution.

    I currently see the my card PCI IEEE 1394 (old map 2001) who has a complaint OHCI driver (I guess that's the default windows driver). I also see the camera under my hardware, but it shows with a small sign of error that says "device will not start (Code 10)". I also installed the driver NOR can I see in my MAX of NOR, but non-material to my PCI IEEE 1394 card.

    I also discovered that when I had a unibrain driver installed (in collaboration with the complaint OHCI driver) my camera simply don't appear in my hardware.

    That maybe I need to connect the driver OR with my IEEE 1394 card (I tried to do, but I could not)?

    In the attachments you will find a photo that shows my material.


    Don't bother the problem is resolved. I think she had need of some time after uninstalling the driver unibrain to see the cam OR max. For those who have the same problem: just install the default windows driver (OHCI complaint) and install the NOR-IMAQ for IEEE 1394 driver (think my problem was the additional Unibrain driver).



  • I'm trying to interconnect a XP home and a XP Pro with a Firewire 1394 through a Maxtor One Touch 4 Plus HARD drive cable to share the HARD drive and also run a home network.

    Is it possible for me to take the files of XP Home that has installed 1394 controller and use the 4 files that I found marked 1394 in I386 to form the controller on my XP Pro, more driver 1394 in \WINDOWS\System32\DRIVERS to close the loop and enable the ethernet connection both 1394 on both computers to have two computers connected to the Maxtor One Touch 4 Plus as well as HARD drive the network. I was hoping maybe even replace the ethernet cable and use the connection 1394 through the Maxtor which has several types of connectors on it.  Again, I am trying to install a controller 1394 on a computer that has no 1394, than USB 2.0. so that the XP Pro machine will recognize the 1394 card with my home XP firewire cable to the Maxtor HDD which it is already connected to the XP Pro via USB 2.0? I have you confused yet?

    I found a post of S.W. video dated the 05/01/11, which has been handled by Gokul T and treated with the Firewire cable and video on a newer operating system, so I thought I would test Gokul T or someone else to resolve this situation. I couldn't find a controller IEEE 1394 I could just download and install on my XP Pro machine. These are the two Dell, is an inspiron 5100 with installed 1394 with taking and the GX280 is one without the 1394 controller installed, or the socket.

    You will need a firewire to XP Pro card. The drivers are already on the hard drive. Once the card is installed, you will see the icon of the network for this adapter. So you can use it.

    The reason why there is no 1394 net adapter on XP Pro is now, because there is no firewire card

  • How can I enable LAN card in my Satellite A100-413?


    I just installed Win XP operating system and also all the drivers (graphics driver driver audio, etc.). All of them work fine, except the network card. I can't? t find the network card on my XP system.

    I can't find 1394 Net Adapter but when I log in the system of windows Media Center has 3 NICs listed there (1394 network adapter, Intel Pro/100 Ve Network connection and wireless network connection).
    Do you want to tell me how I can activate the Intel Pro/100 Ve Network connection?

    Thank you very much!


    I guess that you have activated the Device Manager and it has listed three options (1394 network adapter, Intel Pro/100 Ve Network connection and wireless network connection)

    Well, you n t need to activate the LAN. You only need to install the drivers correctly.
    I hope that you have chosen the right unit in the region of diver.
    In any case, on the page of the driver I found two versions of LAN drivers; and 9.0.24. I think you should test both.
    In addition, you will find on the page of the driver installation instructions. You must follow this guide line. You must install drivers in the correct order.

    In my opinion if you will follow this tip everything will work correctly ;)

  • Add a Firewire expansion card to my Pavilion slimline 5210t

    Can I add a Firewire expansion card to my HP Pavilion Slimline Desktop 5210t? Using Windows 7 64 bit. Any help you can provide about what to purchase or installation will be appreciated. I am trying to download movies from my Sony Handycam which uses the digital 8 mm band and has an output of firewire 4 pin.


    It is the only card that I could find that would work with the low-profile chassis has your PC.

    Please feel free to look around a few others.

    Your choices are limited due to the fact that your PC requires a flat mounting bracket to secure the card.

    The motherboard on your PC supports the two PCI express or PCI cards (there are 2 PCIe x 1 slots and one PCI slot as shown in the illustration below (white parallel slits at the bottom of the motherboard).


  • I have a problem with a card being inadmissible for the zoom on a phone.

    I have a problem with a card being inadmissible for the zoom on a phone. The Web site has been formatted for the phone using Muse. The plan should be saved in a way in Photoshop or y at - it a setting in the Muse who can fix this?

    Please provide more details, as if the card is integrated an image or a real map generated by widget.

    The generated plan must zoom in/out.

    Thank you


  • Hey, need help. I get this in my iPhone that 'there is a problem of billing with a previous purchase. Please update your payment method"in any way I can remove my visa card from iTunes

    Hey, need help. I get this in my iPhone that 'there is a problem of billing with a previous purchase. Please update your payment method"anyway I can remove my visa card from iTunes?

    You must pay your debt first.

  • iMac can't see SD cards

    My iMac can't see SD cards as before gradually.

    Disk utility cannot see the SD cards.

    All of my SD cards are good.  They can be read by other computers.

    Try a reboot.

    Make a backup using Time Machine or a cloning program, to ensure that data files can be recovered. Two backups are better than one.

    Try to set up another admin user account to see if the same problem persists. If back to my Mac is enabled in system preferences, the guest account will not work. The intention is to see if it is specific to an account or a system wide problem. This account can be deleted later.

    Isolate a problem by using a different user account

    If the problem is still there, try to start safe mode using your usual account.  Disconnect all devices except those necessary for the test. Shut down the computer and then put it up after a 10 second wait. Immediately after hearing the startup chime, hold down the SHIFT key and continue to hold it until the gray Apple icon and a progress bar appear. Startup is considerably slower than normal. This will reset some caches, forces a check for directory and disables all start-up and connection, among other things. When you restart normally, the initial restart may be slower than normal. If the system is operating normally, there may be 3rd party applications that pose a problem. Try to delete/disable the third-party applications after a reboot using the UN-Installer. For each disable/remove, you need to restart if you do them all at once.

    Safe mode - subject

    Safe mode - Yosemite

  • HP 15-g018dx Notebook PC: HP 15-g018dx Notebook PC can upgrade my graphics card to give me a high performance on the game?

    Serial number: [personal information deleted]

    Model: 15-g018dx

    Product number: J5T41UA #ABA

    I tried to figure out if I can update my graphics card and I was wondering if I could, and what graphics card would be better for my laptop for high performance on the game.


    No, it uses the CPU/processor AMD Quad-Core APU A6-6310 2.4/1.8GHz:

    You will also need to change the motherboard and it is a very expensive upgrade.

    Kind regards.

  • Satellite A300 - 1 GM - can I replace graphics card?

    I have the Satellite A300 - 1 GM.
    Graphics card: Radeon Mobility HD 3470
    Can I replace this card to another?


    In General, the replacement of the graphics card (another) is not possible and definitely not supported.
    Detailed response, which you will find under

    Good bye

  • The HDR - AS100v Pro Mode: Can I use a card adapters 48 MB/s, or should it be 50 MB/s?

    So I just ordered this camera, and I noticed that you can save a flow rate higher with an SDXC card. I was wondering if the write speed MUST be at least 50 MB/s for pro mode is active, or if a card XDXC 48 MB/s works also.

    Thank you!

    Hi Meszaro90,

    Welcome to the community of Sony!

    The cam action accepts a memory card with a 48 MB/s write speed. We suggest you use the SDXC card which is a class of 10 or greater. You can use a memory card ultra high speed for faster write speed.

    If my post answered your question, please mark it as "accept as a Solution. Thanks_Mitch

Maybe you are looking for

  • A60 SP does not start

    I have a satellite pro A60 which was working fine yesterday, but today will not start. The first time that I turned it on this morning it showed the home toshiba screen, then the screen went black with a cursor flashing at the top left, but would not

  • HP Pavilion p6 - 2220t: motherboard layout and before panel connector pinout

    Hello I need the layout of the motherboard for the TX of H-Cupertino3-H61-ua (Cupertino3). This page: available and the legend are missing.  I need to know the pinout of the connector cover (power, hard

  • E5 - 722G - 68AP 10 Windows does not recognize the WiFi and BT adapter

    I just bought ACER ASPIRE E 17 - model: E5 - 722 G-68AP, and after I installed Windows 10 (x 64), it seems that Windows see not all hardware Wifi & BT. So I checked the stickers bahind and he says: Wireless and bluetooth QCNFA435 is mounted on that l

  • EA2700 smart wifi keeps bug broadcast even if SSID wireless disabled

    Ver. is the firmware. Cutting the 2.4 Ghz and 5 Ghz wifi does not interrupt the transmission of a SSID. If allow wireless admin is checked the continuous SSID broadcasting on 5 GHz and 2.4 Ghz bands. If not checked the SSID then forwards

  • Video clips on DVD

    I'm trying to burn on DVD vidoe clips, but it freezes or comes in saying that I don't have the correct decoding software?  Please help me