Can a module SCXI 1102 with a block of 1303 b cause some channels of reading of the voltage signals and other signals of current reading at the same time?

Similar Questions

• [ADF, JDev 12.1.3] Fragment 3 sections (each with a grid + form): best solution to commit / rollback all changes at the same time?

  Hallo,

  I need to create a fragment like page2create.jsff in this picture http://digilander.libero.it/flattit82/OTN_FILES/TotalCommRoll.png

  You kindly could give me some advice on how to achieve the result shown in the picture?

  Could you a panel tabs help keep the 3 sections on the same page and making it simpler handling of commit / rollback as requested?

  Thank you

  Federico

  Hello

  Yes, you can use panelTabbed to create this type of layout and for the handling of commit or rollback

  1. If you want to commit and a rollback for all 3 tabs then place these buttons (Commit and Rollback) outside panelTabbed and allow the creation, update and deletion on all tabs at the same time, after completing the user operation can use commit or rollback for all tabs

  2. If you want to commit separate and operation of catering for the different tab, then create and modify mode disable other tabs except the active tab, and only after a commit or rollback in the current tab allow the user to navigate to the different tab

  Thank you

• Why can't acquire data from strain and resistance at the same time with a NI 9219 module?

  Hello

  I use a chassis with a NI9219 module 9172 cDAQ to try to acquire the strain and resistance at the same time, with the Labview SignalExpress software.  Is this possible?  When I try to display two values of signal at the same time, I get an error of assistant DAQ 50103 'the specified resource is reserved.  The operation could not be performed as indicated.  I used to be able to acquire the strain and tension at the same time, but now even that gives me error 50103.  I have hours trying to figure this out.  Any help would be greatly appreciated.

  Thank you

  Justin

  That's all!  Thank you very much, now I can sleep tonight - seriously!

  Thanks again,

  Justin

• Input module of data acquisition can be read by two or more LabVIEW vi at the same time % 3F

  I use the DAQ palette in LabVIEW to read the virtual channels of the input data acquisition module. I've done several VI who read many entries of three modules of simulations. The problem appears when I run two or more VI´s reading entries from the same virtual module (for example. first.VI module 1 input ai0 and second.VI bed ai0 entry module 1 bed), when this happens the next errors are shown:

  Error-50103

  Platform AND Services: The specified resource is reserved. The operation could not be performed as indicated.

  and

  Error-200022

  Resource requested by this task has already been reserved by another task.

  It's worrying because I want to get the DAQ chassis and some modules, but if this problem is present with physical equipment my application may be unnecessary. This means that entry module only can be read once at the time?

  I m using global variables in each Subvi to share data with main VI, however, I found the solution in a different way... I just changed to single channel and dbl sample playback mode, so I Don t need to clean up the task of reading in my subVI´s, the zeros isn´t problem here, and the six subVI´s work at the same time!

  Thanks for the tips!

• In Acrobat XI, how can I select and move multiple blocks of text/image at the same time on the same page?

  I work with PDF files generated by student requiring all content in a specific range of margin. Occasional tables and figures are indented or otherwise properly spaced so that the content violates the margin requirement. In Acrobat X, I could use the selection tool to draw a selection rectangle around all text and lines of a table for example and just drag the entire table over a little to meet the requirements without referring the PDF to the author for correction. It did not always work, but quite often that I was able to use it on a daily basis.

  Is it possible to select several (but not ALL) blocks of text and image on a page pieces, so they may be submitted at the same time? If I have to select each text block and lines (or each point and in a chart) and move them each individually, it's going to be a nightmare.

  I have Acrobat XI for Mac and Windows, but tend to use the version of Windows more often.
  

  People have reported what happens when preview of the output (I think) window is open. So you can close.  have not heard of another fix

• Can I pair headset Bluetooth and a chest strap heart rate monitor Bluetooth at the same time with the Apple Watch 2 series

  Does anyone know if you can pair Bluetooth headset at the same time and heart rate monitor strap chest Bluetooth with the Apple Watch series 2? I can't find any info about it online. I hope so, because they have everything works without your phone now since it has GPS. Obviously a chest strap heart rate monitor gives you a more accurate reading. And who is running without music? If they want to really all the new capabilities of fitness improved series 2, that this is a must!

  The original WATCH allows you to do this, so I don't see why the series 2 would not.

• IPhone 5 c of the girl freezes a lot.  We took at the Sprint store and they can't find anything wrong with it.  They tell her to delete photos to make a storage capacity.  Any other ideas?

  IPhone 5 c of the girl freezes a lot.  We took at the Sprint store and they can't find anything wrong with it.  They tell her to delete photos to make a storage capacity.  Any other ideas?

  How much free space is a iPhone? Use the settings app to find out.

  Settings > General > storage > storage section is at the top.

  Did you remove photos from the film? If so, the photos transferred from the recently deleted album. They can remain there for 30 days allow for their recovery. But if you need to free up space on the iPhone you should remove again the album photos recently deleted.

• the evaluation of aci software has problems with net.framework 3.5.1 can I download framework 4 and run at the same time as 3.5.1

  the evaluation of aci software has problems with net.framework 3.5.1 can I download framework 4 and run at the same time as 3.5.1

  the computer has windows 7 64 bit.

  IPEC software crashes and the error says that it has to do with the 3.5.1

  .NET 3.5 is part of installing win7

  .NET 4 and above is installed via windows update, important updates, and if your windows update is running, would have had to already be installed.

  Installing .net 4 does not .net 3.5

• Hi I would like th different creative cloud buy 2, only photoshop/lightroom one and the other with all pack.is it is possible because I saw that we can only install on 2 different computers at the same time

  Hi I would like th different creative cloud buy 2, only photoshop/lightroom one and the other with all pack.is it is possible because I saw that we can only install on 2 different computers at the same time

  Creative desktop cloud applications can be downloaded and installed on multiple computers, regardless of the operating system. However, the activation is limited to two machines per individual related to the composition, and you may not use the software on these devices simultaneously.

  You can also see:

  FAQ: Can I install Creative Cloud on several computers?

  You can either sign of Creative cloud on a computer to connect to another, or as you said, buy a membership second using an AdobeID different so that you can leave, signed at on 4 computers.

• With Creative Cloud, can run us applications on two computers at the same time?

  Hello

  (First Question):

  I have two diffrant PC with the same OS (Windows 7),

  can I use any application on the two PCs at the same time with my plan full creative cloud for individuals - annual.

  ((Deuxième Question):

  If the answer to my question above is yes then my second question is that I use my laptop at home, except office hours so it is possible

  to install creative cloud on my third machine (Windows - computer laptop at home).

  Example: Can I use Creative cloud when I am connected at home and not in the desktop.

  First question: Yes

  See Q3 in respect of development underway in the FAQ

  http://www.Adobe.com/products/creativecloud/FAQ.html

  Second question: not easily.

  Your cloud membership entitles you to 2 simultaneous activations only max.

  To use it on the 3rd computer, you should disable first on the desktop computer. Then re-enable the next day.

• I use a headset bluetooth with my iPad, but have only a charger and there are times where I need to recharge both at the same time. What can I do?

  I need to recharge the headset/Bluetooth headset and iPad at the same time. Do only one charger with a USB port. Apple supports a multipart charger?

  Why you don't want to buy a second charger? Each unit came with a charger?

• Mr President, how can I enter two rows at the same time with different default values that only the first line to use see?

  Mr President.

  My worm jdev is 12.2.1

  How to enter two rows at the same time with different default values that only the first line to use see?

  Suppose I have a table with four fields as below

  "DEBIT" VARCHAR2(7) , 
    "DRNAME" VARCHAR2(50),
    "CREDIT" VARCHAR2(7) , 
    "CRNAME" VARCHAR2(50),
  

  Now I want that when I click on a button (create an insert) to create the first line with the default values below

  

  So if I click on the button and then validate the second row with different values is also inserted on commit.

  The value of the second row are like the picture below

  

  But the second row should be invisible. It could be achieved by adding vc in the vo.

  The difficult part in my question is therefore, to add the second row with the new default values.

  Because I already added default values in the first row.

  Now how to add second time default values.

  Concerning

  Mr President

  I change the code given by expensive Sameh Nassar and get my results.

  Thanks once again dear Sameh Nassar .

  My code to get my goal is

  First line of code is

      protected void doDML(int operation, TransactionEvent e) {    
  
          if(operation != DML_DELETE)
               {
                   setAmount(getPurqty().multiply(getUnitpurprice()));
               } 
  
          if (operation == DML_INSERT )
                     {
                             System.out.println("I am in Insert with vid= " + getVid());
                         insertSecondRowInDatabase(getVid(),getLineitem(),"6010010","SALES TAX PAYABLE",
                          (getPurqty().multiply(getUnitpurprice()).multiply(getStaxrate())).divide(100));      
  
                         }
  
          if(operation == DML_UPDATE)
                            {                                                    
  
                               System.out.println("I am in Update with vid= " + getVid());
                           updateSecondRowInDatabase(getVid(),
                               (getPurqty().multiply(getUnitpurprice()).multiply(getStaxrate())).divide(100));      
  
                            }                      
  
          super.doDML(operation, e);
      }
      private void insertSecondRowInDatabase(Object value1, Object value2, Object value3, Object value4, Object value5)
                {
                  PreparedStatement stat = null;
                  try
                  {
                    String sql = "Insert into vdet (VID,LINEITEM,DEBIT,DRNAME,AMOUNT) values " +
               "('" + value1 + "','" + value2 + "','" + value3 + "','" + value4 + "','" + value5 + "')";  
  
                    stat = getDBTransaction().createPreparedStatement(sql, 1);
                    stat.executeUpdate();
                  }
                  catch (Exception e)
                  {
                    e.printStackTrace();
                  }
                  finally
                  {
                    try
                    {
                      stat.close();
                    }
                    catch (Exception e)
                    {
                      e.printStackTrace();
                    }
                  }
                }  
  
                private void updateSecondRowInDatabase(Object value1, Object value5)
                {
                  PreparedStatement stat = null;
                  try
                  {
                    String sql = "update vdet set  AMOUNT='"+ value5+"' where VID='" + value1 + "'";                     
  
                    stat = getDBTransaction().createPreparedStatement(sql, 1);  
  
                    stat.executeUpdate();
                  }
                  catch (Exception e)
                  {
                    e.printStackTrace();
                  }
                  finally
                  {
                    try
                    {
                      stat.close();
                    }
                    catch (Exception e)
                    {
                      e.printStackTrace();
                    }
                  }                  
  
                }
  

  Second line code is inside a bean method

      public void addNewPurchaseVoucher(ActionEvent actionEvent) {
          // Add event code here...
  
          BindingContainer bindings = BindingContext.getCurrent().getCurrentBindingsEntry();
                 DCIteratorBinding dciter = (DCIteratorBinding) bindings.get("VoucherView1Iterator");
                 RowSetIterator rsi = dciter.getRowSetIterator();
                 Row lastRow = rsi.last();
                 int lastRowIndex = rsi.getRangeIndexOf(lastRow);
                 Row newRow = rsi.createRow();
                 newRow.setNewRowState(Row.STATUS_NEW);
                 rsi.insertRowAtRangeIndex(lastRowIndex +1, newRow);
                 rsi.setCurrentRow(newRow);
  
                 BindingContainer bindings1 = BindingContext.getCurrent().getCurrentBindingsEntry();
                 DCIteratorBinding dciter1 = (DCIteratorBinding) bindings1.get("VdetView1Iterator");
                 RowSetIterator rsi1 = dciter1.getRowSetIterator();
                 Row lastRow1 = rsi1.last();
                 int lastRowIndex1 = rsi1.getRangeIndexOf(lastRow1);
                 Row newRow1 = rsi1.createRow();
                 newRow1.setNewRowState(Row.STATUS_NEW);
                 rsi1.insertRowAtRangeIndex(lastRowIndex1 +1, newRow1);
                 rsi1.setCurrentRow(newRow1);
      }
  

  And final saveUpdate method is

      public void saveUpdateButton(ActionEvent actionEvent) {
          // Add event code here...
  
          BindingContainer bindingsBC = BindingContext.getCurrent().getCurrentBindingsEntry();      
  
                 OperationBinding commit = bindingsBC.getOperationBinding("Commit");
                 commit.execute(); 
  
          OperationBinding operationBinding = BindingContext.getCurrent().getCurrentBindingsEntry().getOperationBinding("Commit");
          operationBinding.execute();
          DCIteratorBinding iter = (DCIteratorBinding) BindingContext.getCurrent().getCurrentBindingsEntry().get("VdetView1Iterator");// write iterator name from pageDef.
          iter.getViewObject().executeQuery();  
  
      }
  

  Thanks for all the cooperation to obtain the desired results.

  Concerning

• Can I have Photoshop open with my desktop and laptop at the same time with the account of the company?

  I already have two individual accounts for my husband and me, but together, we use and work on 4 computers, so we need their access at any time. At the same time I can work on Photoshop on my computer laptop and InDesign on my desk. I'm not the greatest to leave thoughts programs the day either. If at some point, Photoshop can be opened on all computers. Will this be a problem on the behalf of the company?

  Cloud license allows 2 activations http://www.adobe.com/legal/licenses-terms.html

  -Two activations may NOT be used at the same time (noted in the link above of the license)

  If you must have the program create open on 2 computers at the same time, look for a subscription of the TEAM, so each ID is unique

  Team license links that can help

  - https://creative.adobe.com/plans?plan=team team plans

  -http://www.adobe.com/creativecloud/buy/business.html

  -https://helpx.adobe.com/contact/creative-cloud-teams.html using the team

  -manage your account http://forums.adobe.com/thread/1460939?tstart=0 team

• Can I update several forms with the drop-even at the same time

  I have 20 + forms that have a menu drop-down together.  Each shape has between 1 and 15 cases of this drop-down list.  The values in the drop-down list are updated on a frequent basis.

  Currently I have an identical JavaScript Document named "UpdateDropdowns" in each shape.

  function update_dropdowns()

  {

  aList var = [' ', 'A', 'B', 'C' "];

  Add any other choice dropdown in the var aList in the specified format
  getField("TradeNameDropdown1").setItems (aList);

  getField("TradeNameDropdown2").setItems (aList);

  Add any other drop down menus added to the form in the specified format
  

      // Open Log Console (Ctrl-J), enter update_dropdowns()  (Ctrl-Enter)

  }

  There are more than 30 choices in my current iteration of unelistede var, but for brevity, I have listed only the 3 examples to illustrate my JavaScript.

  Currently when I update the drop-down list, I followed these steps

  1. Open form
  2. Open the Document UpdateDropdowns JavaScript
  3. Add the additional values
  4. Select and copy the var aList update
  5. Close the JavaScript Document
  6. Update the form in the Console log
  7. Repeat for all forms (collage in the new aList var to ensure compliance)

  Is it possible to update all my forms at the same time without having to go through this process of form with form?

  Well done, you must create a new Action (under Tools - Wizard of the Action), add to that a command run JavaScript with your code (no need to function definition, just the code itself), and then add a Save command, and then run it on your files and finished...

• Can I use Lightroom on my mac and my pc at the same time with a single subscription?

  Hi all

  for five months now, I have a subscription to creative cloud for Lightroom and Photoshop. So far, I used just on my PC. Now I have bought me a MAC and want to install Lightroom on MAC either. Do I need a second subscription for MAC or can I use my subscription on MAC and PC at the same time?

  thx for your comments

  If you ask if you can run the software subscription on both machines at the same time, the answer is no.  Your license you can only use one of the facilities at any given time.

  If you ask that if you have the software installed and that can be used on both machines so the answer is Yes... just can not both machines in use, software subscription running at the same time.