Can anyone assist me with this STOP error blue screen? IRQL_NOT_LESS_OR_EQUAL

Hello

Yesterday, my measure PC worked fine. To market today, about twenty seconds after startup, I got a blue screen (seen below) and get that since then. However, I am able to run very well Safe Mode. I read on the installation of a patch and installed, but may not run in Mode without failure, and I don't have enough time to run it in normal mode until I get the blue screen again, which is very frustrating. If someone could get back to me soon on how to address this problem, it would be much appreciated.

Thank you!

-Ben

Hi Ben,

Thank you for the update.

You can refer to the suggestions provided by Marilyn O replied on October 1, 2012 which can help you create a repair disk.

I hope this helps.

Tags: Windows

Similar Questions

  • How can I fix stop error (blue screen) occurs whenever I try to open a link of U-Tube? I am running Windows XP.

    Whenever I receive an email containing a link to U-Tube, or try to connect to a position of U-Tube by link via my browser, it starts to open up and then freezes. The computer shuts down after briefly showing a blue error screen.

    This happens if the browser is IE, Firefox, Google, or Google Chrome.
    I tried the system restore, but it will not go to any control point before this event began, about four weeks ago.
    I also tried Mats_Run.Codec.exe, MS Automated Troubleshooting service, nothing helps.

    You would get further faster and with less effort, if we know a little more about your system and you can eliminate the 'try' things.

    What is your system brand and model?

    What is your version of XP and the Service Pack?

    You will always be to 'catch' the BSOD if you do this:

    XP is configured to restart automatically on some system failures, you will need to disable this feature for the information of the blue screen of death (BSOD) will remain on the screen for you to see.

    You must also configure XP to create a memory for each BSOD dump file, so you'll have a crash dump file to watch later if debugging more is necessary.

    If your system crashes later, the information you need will always be on the screen and then you can use the information in the dump files memory to understand what the problem is and fix it.

    Disable automatic restart in case of system error

    XP restarts on system failure, so automatically configure your system so it does not, then you can see the error message.

    Configure your system does not automatically restart on system failure

    Right click my computer, properties, advanced, startup and recovery settings.

    In the system failure section:

    Put a check mark in the box "write an event to the system log.
    Put a check mark in the box "send an administrative alert.
    Uncheck 'automatically restart '.

    In the Write debugging information section select:

    Partial dump (64 KB)

    Set the directory small dumpster:

    %SystemRoot%\Minidump

    Click OK, OK.

    Restart your computer.

    The next time your system crashes, provide more information on what you see.
    Here's a BSOD example showing information you provide:
    Send for the nose and the Red arrows (3 to 4 lines total).
    Send all * line STOP message since there are clues in the 4 parameters.
    If there is a name of the file listed in the STOP message, don't forget to include this information too.
    Ignore the boring text unless it seems important to you.  We know what a BSOD looks like, we need to know what your BSOD looks like.

    This sounds like a video driver issue, so we can see what you have for your system, audio and video drivers.

    If you need help to know what your video driver and audio situation, and where to get possible improvements to your video and sound drivers, follow these steps:

    Click Start, run and enter in the box:

    Msinfo32

    Click on OK and when the system info summary appears, click on Edition, select all, copy, and then paste the information here.

    For information about video drivers, expand components, click view, click on edit, select all, copy and then paste the information here.

    For more audio information, expand components, click on Sound Device, click on edit, select all, copy and then paste the information here.

    There will be some personal information (such as the user name and the name of the system), and anything that turns information private for you, simply delete the pasted information.

    This will minimize back Q & A and eliminate guesswork.

    If you want to get more information on your BSOD, follow these steps:

    Download BlueScreenView here:
    Unzip it and run it (BSV installs nothing) and let him complete the digitization of all your crash dump files.
    If you double-click on depressed, you will get information on it (including the field caused by the driver) and you should be able to spot the problem right away - especially if you see a model in landfills where Caused by field pilot is the same (beginning with this driver).
    BlueScreenView tries to find the right driver or module that caused the blue screen by looking inside the stack of the accident. However, be aware that the driver detection mechanism is not 100% reliable, and you should also look in the lower pane, that display all drivers/modules found in the stack.
    Select (highlight) one or more of the most recent dump files by clicking on them and hold down the CTRL key to select multiple files.  Try to select only the most recent links that relate to your problem (perhaps five or six to start dump files).
    Click on file, save selected items and save information from the dumps to a text file on your desktop called BSOD.txt.  Open BSOD.txt with a text editor, copy the text and paste it in your next reply.
    Here's an example of report ASB to a single BSOD I initiated on purpose that indicates the cause of the accident as the pilot i8042prt.sys belonging to Microsoft Corporation:
    ==================================================
    Dump file: Mini062110 - 01.dmp
    Crash time: 21/06/2010-11:51:31
    Bug Check String: MANUALLY_INITIATED_CRASH
    Bug check code: 0x000000e2
    Parameter 1: 0x00000000
    Parameter 2: 0x00000000
    Parameter 3: 0x00000000
    Parameter 4: 0x00000000
    Caused by the driver: i8042prt.sys
    Caused by the address: i8042prt.sys + 27fb
    Description of the file: i8042 Port driver
    Product name: Microsoft® Windows® Operating System
    Company: Microsoft Corporation
    File version: 5.1.2600.5512 (xpsp.080413 - 2108)
    Processor: 32-bit
    Computer name:
    Full path: C:\WINDOWS\minidump\Mini062110-01.dmp
    ==================================================
    Send the information of the last 5 memory dumps (if you don't have 5 memory dumps yet, send the newest, you have).
  • Windows XP Stop error, blue screen.

    Hello moderators,

    I am running Windows XP SP3. My Info system is as follows:-

    Name of the operating system Microsoft Windows XP Professional
    Version 5.1.2600 Service Pack 3 Build 2600
    Manufacturer of operating system Microsoft Corporation
    System name USER-364DED4B8D
    System manufacturer MSI
    System model MS-7597
    System Type X 86-based PC
    Processor x 86 family 16 model 5 Stepping 3 Mhz-AuthenticAMD ~ 3013
    BIOS Version/Date American Megatrends Inc. V10.2, 14/03/2011
    SMBIOS 2.5 version
    Windows C:\WINDOWS directory
    System directory C:\WINDOWS\system32
    Boot Device \Device\HarddiskVolume3
    The local United States
    Hardware Abstraction Layer Version = "5.1.2600.5512 (xpsp.080413 - 2111).
    User name USER-364DED4B8D\user
    HIS Western time zone standard time
    Total physical memory 096,00 MB 4
    2.28 GB available physical memory
    Total virtual memory 2.00 GB
    Available virtual memory 1.96 GB
    Page file space 4.81 GB
    Paging file C:\pagefile.sys

    I was playing music on Windows Media Player. Visualizations was running. When all of a sudden system crashed "Stop error". I restarted the system and received the error message. The details are as follows: -.

    BCCode: 1000008e BCP1:c0000005 BCP2: B3E96EZ56E25 BCP3: B27DE118 BCP4: 00000000

    BONE, 51_2600 SP3_0 worm produces 256_1

    I checked the system tools and looked into the system the only thing I could find was a warning that my web cam created an error about 2-3 days before today.

    A further check revealed that the webcam and its software was not spent by the Microsoft Logo and was therefore inconsistent to run under XP.

    I have experienced this type of problem before crash and recently did a clean install of the operating system. I'm afraid that if I folds music or run that DVD system stops again.

    What can I do to prevent it happening again.

    I will be grateful for any assistance to resolve the problem.

    Thanking you.

    standeb.

    http://xpdrivers.com/hardware/cameras/resolving-Webcam-driver-issues-for-Windows-XP/

    read this.

    If it corrects the problem return post, otherwise it would be logical to uninstall the software from your webcam and then see if the error occurs again all while listening to music and watching visualizations.

    post results back please.

  • installing windows home server stop error blue screen 0x0000007b

    I want to install Windows Home server on a processor intel DH57JG motherboard with a processor Intel i5 650 CPU and 4 GB of Ram Kingston.

    I have 4 2 TB Samsung than hard drives in raid 5
    To make the bootable Raid 5 I partitioned into 2 drives the first being under the 2047 GB.
    The first part of the installation went well until I asked the question of f6.
    I downloaded the driver diskette file required to Intelbut she is 3 years old and says nothing on my motherboard.
    Ignore this as I get the Blue Screen of Death with the above Stop message.
    Any ideas anyone

    Hello

    Since your question involves the use of Windows Home Server please join the Windows Home Server Support Forums. They specialize in THIS type of environment Pro and will be better suited to help you.

    Windows Home Server Forums
    http://social.Microsoft.com/forums/en/whshardware/threads

  • Restart after a Stop error blue screen

    I got a blue screen on my laptop Toshiba Satellite 5200 Series stop error.

    I could point out here, in its entirety, if that would be helpful. However, he begins by telling me to restart the machine, but the power button / stop device is not allowing me to turn it off.

    Should what steps I take?

    Crikey! In another forum someone told me to press the button for 5 seconds... and it worked!

  • I get an error code, 0 x 80070070. Don't know why, can anyone help me with this?

    Error code 0 x 80070070, what do I do to fix this?

    Do you know when this problem started?  Try a system restore to a point in time BEFORE the problem started.  Here is the procedure: http://www.howtogeek.com/howto/windows-vista/using-windows-vista-system-restore/.  Don't forget to check the box to show more than 5 days of restore points.  If the first attempt fails, then try an earlier point or two.  NOTE: You will need to re - install any software and updates that you have installed between now and the restore point, but you can use Windows Update for updates.

    If the system restore does not work, do a startup repair, boot from the disk Installation of Windows Vista genuine (or one that you can borrow from someone) or a recovery disc.  Here is the procedure: http://www.bleepingcomputer.com/tutorials/tutorial148.html.  You may need to change the BIOS to do first the CD drive in the boot sequence to boot from the CD.  To do this, hold the screen that tells you the key F to push to enter the menu start or start of installation.  Push it quickly. Make the changes, save your work and exit.  Put the CD in the drive and reboot.  When you are prompted, press any key to boot from the CD.

    If you do not have a floppy disk, you can make a bootable recovery disk by using http://neosmart.net/blog/2008/windows-vista-recovery-disc-download/ with burning software like: http://www.snapfiles.com/get/active-isoburner.html and, of course, a blank CD.

    If this does not work, try to start in safe mode (repeatedly hit F8 key so that the start and go in safe mode with networking).  Then we will check some of your system files:

    Go to start / all programs / accessories / command prompt and right click on command prompt, and then click Run as administrator.

    Type sfc/scannow, go and let it run.  It will scan and try to correct some of your system files.  If all goes well he comes complete with no corruption, it could not repair (if it has these post of corruption here or try to analyze it to find the problem or files using http://support.microsoft.com/kb/928228.

    While in the command prompt, type chkdsk /f /r and enter and let it run.  It will scan and try to solve any corruption or bad sectors on your hard drive and remove especially as a cause.

    If it does not, then thanks for posting any repetitive error messages in the event viewer (start / Control Panel / administrative tools / Event Viewer).  Here's how to use Event Viewer: http://www.bleepingcomputer.com/forums/topic40108.html.

    http://www.vistax64.com/tutorials/88236-repair-install-Vista.html , as well as the upgrade from an earlier version of the Windows section of the following: http://support.microsoft.com/kb/918884.  Although this will not affect your data, settings or programs, you should always back up your data before you start just be on the safe side. If other procedures do not work, it is almost certain to work.  You can have a lot of updates to re - install (including all you need to remove service packs).  If the version on system with SP1 or SP2 preinstalled cane and the disc is an earlier version, then you will need to do a slipstream drive as follows: http://www.vistax64.com/tutorials/151606-vista-sp1-slipstream-installation-dvd.html.

    I hope one of these procedures can solve your problem.  If this isn't the case, after return and we will try something else.  Return message anyway so we know how it turns out.

    Good luck!

    Go to the Device Manager by going to start / find and type Device Manager and enter and then double-click on the program icon that appears.  Check each device to a red x, yellow! or white?  These identify devices with problems probably (drivers, but also of conflict or something else).  Click on each for more details and troubleshooting tips.  If you need to get pilots to leave the computer dealer or the manufacturer of the device (NOT of Microsoft Updates).  In fact, you must disable automatic updates in Windows Update driver as follows: http://www.addictivetips.com/windows-tips/how-to-disable-automatic-driver-installation-in-windows-vista/. Follow these steps: http://pcsupport.about.com/od/driverssupport/ht/driverdlmfgr.htm.  Once you have the drivers, you can install them via the Manager device as follows: http://www.vistax64.com/tutorials/193584-device-manager-install-driver.html.

    If this does not work, you will need to do a repair/system upgrade using the Windows Vista Installation disc authentic (you own or that you can borrow from someone).  Here is the procedure:

    Lorien - a - MCSE/MCSA/network + / A +.

  • 66A error code allows me to install windows update, can anyone help me with this.

    try to install the windows update, but it keeps giving me the error 66 has code that doesn't seem to be in windows help and support anyone can help.

    lisakavanagh,

    See this response archived from a previous thread:

    http://social.answers.Microsoft.com/forums/en-us/vistawu/thread/3f41498b-9cfa-4ddf-8445-45b961dfaea1 >

    06:25:30 pm06:26: 46 pm

  • Can someone please help with this flash error?

    I am unable to load a file CS6 in CS5 at school I want to that I just discovered, I did. I can't make a .swf because of blocks of privelages. How can I convert to load in CS5. I downloaded the .fla to mediafire and wonder if anyone can convert it, since I can't run an exe on this computer here. My project is due in 20 minutes, I love you, one that helps me for the rest of my life. http://www.mediafire.com/?dbe7brznpbbo8zv

    Here you go: http://www.kglad.com/Files/forums/Untitled-3.fla

  • Windows 7 stop errors/blue screen error BCCode: 9f

    Hello

    I've been making mistake stop every time I put my laptop on the sleep or hibernate for a while only.

    Got the latest error report when I tried to wake my computer from sleep

    *****************

    Signature of the problem:
    Problem event name: BlueScreen
    OS version: 6.1.7601.2.1.0.256.48
    Locale ID: 1033

    More information about the problem:
    BCCode: 9f
    BCP1: 0000000000000003
    BCP2: FFFFFA8003A1CE30
    BCP3: FFFFF80004D993D8
    BCP4: FFFFFA8009B67E10
    OS version: 6_1_7601
    Service Pack: 1_0
    Product: 256_1

    *****************

    Then,

    I tried the system resolution & / revision of security/maintenance/check of your computer the State of solutions.

    There, I had the info after windows search solutions.

    ****************

    Read our privacy statement online

    Windows
    Problem: To stop unexpectedly
    Files helping to describe the problem:
    100614 46316 - 01.dmp
    SysData. XML
    WERInternalMetadata.xml-
    See a temporary copy of these files
    WARNING: If a virus or other security threat caused the problem, open a copy of file can harm your computer.

    ****************

    When I clicked on the link given above: he extracted the files in the directory - C:\Users\myname\AppData\Local\Temp\WERE09E.tmp)

    Still not sure about him is addressed...

    So, please help to overcome this problem.

    Thanks in advance,

    Ravi

    *******************************************************************************

    *                                                                             *

    * Bugcheck analysis *.

    *                                                                             *

    *******************************************************************************

    Use! analyze - v to obtain detailed debugging information.

    9F error checking, {3, fffffa8003a1ce30, fffff80004d993d8, fffffa8009b67e10}

    Cannot load the image \SystemRoot\system32\DRIVERS\tapnhp6.sys, 0n2 error Win32

    WARNING: Unable to verify timestamp for tapnhp6.sys

    ERROR: Module load completed but symbols can be loaded for tapnhp6.sys

    Probably caused by: ntkrnlmp

    Follow-up: MachineOwner

    ---------

    0: kd >! fffffa8009b67e10 of the IORP

    IRP is active with 3 batteries 2 is current (= 0xfffffa8009b67f28)

    No Mdl: No system don't buffer: wire 00000000: Irp stack trace.

    cmd flg cl device file completion-context

    [0, 0] 0 0 00000000 00000000 00000000 - 00000000

    Args: 00000000 00000000 00000000 00000000

    > [16, 2] e1 0 fffffa8007d4a050 fffff800032af710-fffffa8006e4db50 00000000 success error cancel pending

    \Driver\tapnhp6 nt! IopUnloadSafeCompletion

    Args: 00014400 00000001 00000004 00000002

    [0, 0] 0 0 00000000 00000000 00000000 - fffffa8009c40800

    Args: 00000000 00000000 00000000 00000000

    Please remove Norton and install Microsoft Security Essentials to test.

    Run the https://support.norton.com/sp/en/uk/home/current/solutions/v60392881_EndUserProfile_en_us Norton removal tool

    Restart the computer, download, install, update the definitions and run a full scan with Microsoft Security Essentials:
    http://www.Microsoft.com/en-GB/download/details.aspx?ID=5201

  • Stop error blue screen

    I did experience windows restarts due to the stop as 000000 c 2 or 100008e error. First I reinstalled windows and all adjacent software, but it seems that the problem is to hit me again. Last week I have connected my laptop to the internet and since then I had two windows suddenly reboots. I don't think it's a virus, because I'm under Kaspersky, with a Sygate firewall and spyware real-time protection shield real Ad-Aware. Could you please give me an opinion on these issues.

    Hello

    Believe me; It is very difficult to say what's wrong.
    The Blue error screen usually occurs because of a hardware failure or / and serious malfunctions of software. If this error occurs after installation quite clear, so I guess that it s a hardware failure. Maybe the flaws of memory module. But to be 100% sure you should check it out. I think the best way is to contact the service.

  • Stop error blue screen: 0x0000007E (0xC0000005, 0X806EECEC, 0XF7B6D730, 0XF7B6D426)

    The code is displayed when starting upwards. Safe mode, lkgc, etc. all do the same thing. It goes for the xp screen. Takes about 10 seconds, then blinks for a second before the start procedure restarted. It is a XP Home Edition and I can't seem to load. System Restore is inoperatabe. I have no way to know which driver is perhaps out of service or what is the cause.

    Nevermind I found it I took the hard drive and ran as a second hard drive on vista running kaspersky on it and it starts with the mup.sys being infected or changed. After that there are several of these bad boys out there. http://www.Avira.com/en/support-threats-description/TID/6562/Tlang/en that they are labeled as boot sector viruses. Given that the Ministry of the Interior was not load because of bad sectors, read in a forum at random some microsoft guys named chris wrote: it's a kind of jump all started. Thank you for taking the time in trying to help.

  • How can I stop the blue screen error caused by sffp_sd.sys

    Since the middle of the latest version of windows aprils has updated that I regularly get the blue screen... The last was 26/05/12 16:30...

    DRIVER_IRQL_NOT_LESS_OR_EQUAL

    STOP: 0X000000D1 (0X00000002, 0X00000000, 0X00000008, 0X914E8774)

    BTHUSB Device bthport.sys - 914E8774 address, base at 914E5000, Datestamp 4db03738

    Hello

    BTHUSB Device bthport.sys and sffp_sd.sys are the two components of Windows that means something else led him into
    Fault. First thing I would do is update the BlueTooth drivers. Check with the system manufacturer (mother's support-
    the Board Maker for systems (custom), their documentation online and drivers and ask in their forums (if any)
    known issues and/or / the real peripheral manufacturer support site. (See driver update methods in the next
    message.)

    ===============================================================================

    Pick up the pieces after a computer crash
    http://Windows.Microsoft.com/en-us/Windows-Vista/picking-up-the-pieces-after-a-computer-crash

    Check this thread for more information using BlueScreenView, MyEventViewer and other methods
    to troubleshoot the BlueScreens - top 3 responses (+ 1 other).

    http://social.answers.Microsoft.com/forums/en-us/vistarepair/thread/3deab2fa-4000-4136-8c78-a3d22b1db009

    We can analyze the minidumps if make you it available to the SkyDrive or another file
    sharing sites (such as MediaFire). If you have problems to download the copy of minidumps
    for the office or in the Documents folder and download them from there.

    ZIP or download the content of the C:\Windows\minidump

    Use SkyDrive download collected files and after shot/screenshot.
    http://social.technet.Microsoft.com/forums/en-us/w7itproui/thread/4fc10639-02dB-4665-993a-08d865088d65

    ==================================================================

    BCCode: D1 0x000000D1

    Think video drivers especially if it may be others. Refer to the section of driver in my credits
    methods of troubleshooting blue screen below. BIOS, chipset of low level drivers and
    antispyway/antivirus/security programs can also cause this. Check the resolution of the problems and
    When you arrive at the driver and tests of memory sections do reference to generic methods in following
    message and then back to the if necessary troubleshooting tool.

    BCCode: D1 0x000000D1

    Cause

    A driver tried to access a pageable (or that is completely invalid) address while the IRQL was too high.

    This bug check is usually caused by drivers who used a wrong address.

    If the first parameter has the same value as the fourth parameter, and the third parameter indicates a runtime operation, this bug check was probably caused by a driver who was trying to run code when the code itself has been paginated outside. The possible causes for the error page are:

    • The function was marked as pageable and was operating at an IRQL higher (including obtaining a lock).
    • The function call was made to a function in another pilot, and that this driver has been unloaded.
    • The function was called by using a function pointer that was an invalid pointer.


    BCCode: d1 0x000000d1<-- read="" this="">
    * 1210.html? order = votes http://www.faultwire.com/solutions-fatal_error/Driver-IRQL-not-less-or-Equal-0x000000D1-

    =========================================

    Look in the Event Viewer to see if something is reported on those.
    http://www.computerperformance.co.UK/Vista/vista_event_viewer.htm

    MyEventViewer - free - a simple alternative in the standard Windows Event Viewer.
    TIP - Options - Advanced filter allows you to see a period of time instead of the entire file.
    http://www.NirSoft.NET/utils/my_event_viewer.html

    -------------------------------------------------------------------------
    Also this, so you can see the probable bluescreens.

    Windows Vista restarts automatically if your computer encounters an error that requires him to plant.
    http://www.winvistatips.com/disable-automatic-restart-T84.html

    -------------------------------------------------------------------------

    Here are a few ways to possibly fix the blue screen issue. If you could give the blue screen
    info that would help. Such as ITC and 4 others entered at the bottom left. And all others
    error information such as codes of STOP and info like IRQL_NOT_LESS_OR_EQUAL or PAGE_FAULT_IN_NONPAGED_AREA and similar messages.

    As examples:

    BCCode: 116
    BCP1: 87BC9510
    BCP2: 8C013D80
    BCP3: 00000000
    BCP4: 00000002

    or in this format:

    Stop: 0 x 00000000 (oxoooooooo oxoooooooo oxoooooooo oxooooooooo)
    Tcpip.sys - address blocking 0 x 0 00000000 000000000 DateStamp 0 x 000000000

    It is an excellent tool for displaying the blue screen error information

    BlueScreenView scans all your minidump files created during 'blue screen of death '.
    hangs and displays information about all accidents of a table - free

    http://www.NirSoft.NET/utils/blue_screen_view.html

    BlueScreens many are caused by old or damaged, in particular the video drivers drivers however
    There are other causes.

    You can do without if needed fail or the Vista DVD or recovery command prompt mode
    Options if your system was installed by the manufacturer.

    This tells you how to access the System Recovery Options and/or a Vista DVD
    http://windowshelp.Microsoft.com/Windows/en-us/help/326b756b-1601-435e-99D0-1585439470351033.mspx

    You can try a system restore to a point before the problem started when one exists.

    How to make a Vista system restore
    http://www.Vistax64.com/tutorials/76905-System-Restore-how.html

    -------------------------------------------------------------------------

    Start - type this in the search box-> find COMMAND at the top and RIGHT CLICK – RUN AS ADMIN

    Enter this at the command prompt - sfc/scannow

    How to analyze the log file entries that the Microsoft Windows Resource Checker (SFC.exe) program
    generates in Windows Vista cbs.log
    http://support.Microsoft.com/kb/928228

    The log can give you the answer if there is a corrupted driver. (Says not all possible
    driver problems).

    Also run CheckDisk, so we cannot exclude as much as possible of the corruption.

    How to run the check disk at startup in Vista
    http://www.Vistax64.com/tutorials/67612-check-disk-Chkdsk.html

    -------------------------------------------------------------------------

    Often drivers up-to-date will help, usually video, sound, network card (NIC), WiFi, part 3
    keyboard and mouse, as well as of other major device drivers.

    Look at the sites of the manufacturer for drivers - and the manufacturer of the device manually.
    http://pcsupport.about.com/od/driverssupport/HT/driverdlmfgr.htm

    How to install a device driver in Vista Device Manager
    http://www.Vistax64.com/tutorials/193584-Device-Manager-install-driver.html

    How to disable automatic driver Installation in Windows Vista - drivers
    http://www.AddictiveTips.com/Windows-Tips/how-to-disable-automatic-driver-installation-in-Windows-Vista/
    http://TechNet.Microsoft.com/en-us/library/cc730606 (WS.10) .aspx

    -------------------------------------------------------------------------

    How to fix BlueScreen (STOP) errors that cause Windows Vista to shut down or restart
    quit unexpectedly
    http://support.Microsoft.com/kb/958233

    Troubleshooting, STOP error blue screen Vista
    http://www.chicagotech.NET/Vista/vistabluescreen.htm

    Understanding and decoding BSOD (blue screen of death) Messages
    http://www.Taranfx.com/blog/?p=692

    Windows - troubleshooting blue screen errors
    http://KB.wisc.edu/page.php?id=7033

    -------------------------------------------------------------------------

    In some cases, it may be necessary.

    The Options or Vista recovery disk Startup Repair

    How to do a startup repair
    http://www.Vistax64.com/tutorials/91467-startup-repair.html

    This tells you how to access the System Recovery Options and/or a Vista DVD
    http://windowshelp.Microsoft.com/Windows/en-us/help/326b756b-1601-435e-99D0-1585439470351033.mspx

    I hope this helps.

    Rob Brown - Microsoft MVP<- profile="" -="" windows="" expert="" -="" consumer="" :="" bicycle="" -="" mark="" twain="" said="" it="">

  • stop random blue screen error DRIVER_IRQL_NOT_LESS_OR_EQUAL STOP: 0X000000D1

    original title: stop random screen w/blue

    I need help to solve this problem. My system will freeze and then randomly crash if I run games, programs or just sitting idle. I took the fan and blew out the dust, etc... and still no better. The info I get blue screen are:

    DRIVER_IRQL_NOT_LESS_OR_EQUAL

    STOP: 0X000000D1

    nvstor.sys - address 83F42395

    Any help would be appreciated to gratly.

    Hello

    Here is a version of Vista of the troubleshooter that Dena referred:

    =================================================================

    Check this thread for more information on using BlueScreenView, MyEventViewer and other methods of
    Troubleshoot the BlueScreens - top 3 answers.

    http://social.answers.Microsoft.com/forums/en-us/vistarepair/thread/3deab2fa-4000-4136-8c78-a3d22b1db009

    -----------------------------------------------------------------------------------------------------------------

    Check with your manufacturer for newer drivers video card (special forces), known issues and
    other possible problems - check also the video card and game maker forums. It can even be
    a problem created by the interaction of two pilots (rather than the usual cause), perhaps the
    video driver and a swap file error and other causes work together to create the problem.

    ==============================================================

    Even if you have done some of these methods here is the complete troubleshooting tool while
    dealing with his need.

    Think video drivers especially if it may be others. Refer to the section of driver in my generic bluescreen
    methods of troubleshooting below. BIOS, low and antispyway/antivirus/security chipset drivers
    programs may also cause this. Check the resolution of the problems and when you get to the pilot and sections tests memory refer to the generic methods in the next message and then returns to the resolution of problems
    If necessary.

    BCCode: D1 0x000000D1

    Cause

    A driver tried to access a pageable (or that is completely invalid) address while the IRQL was too high.

    This bug check is usually caused by drivers who used a wrong address.

    If the first parameter has the same value as the fourth parameter, and the third parameter indicates a runtime operation, this bug check was probably caused by a driver who was trying to run code when the code itself has been paginated outside. The possible causes for the error page are:

    • The function was marked as pageable and was operating at an IRQL higher (including obtaining a lock).
    • The function call was made to a function in another pilot, and that this driver has been unloaded.
    • The function was called by using a function pointer that was an invalid pointer.

    BCCode: d1 0x000000d1<-- read="">
    * 1210.html? order = votes http://www.faultwire.com/solutions-fatal_error/Driver-IRQL-not-less-or-Equal-0x000000D1-

    =========================================

    Look in the Event Viewer to see if something is reported on those.
    http://www.computerperformance.co.UK/Vista/vista_event_viewer.htm

    MyEventViewer - free - a simple alternative in the standard event viewer
    Windows. TIP - Options - Advanced filter allows you to see a time rather
    of the entire file.
    http://www.NirSoft.NET/utils/my_event_viewer.html

    -------------------------------------------------------------------------
    Also this, so you can see the probable bluescreens.

    Windows Vista restarts automatically if your computer encounters an error that requires him to plant.
    http://www.winvistatips.com/disable-automatic-restart-T84.html

    -------------------------------------------------------------------------

    Here are a few ways to possibly fix the blue screen issue. If you could give the blue screen
    info that would help. Such as ITC and 4 others entered at the bottom left. And all others
    error information such as codes of STOP and info like IRQL_NOT_LESS_OR_EQUAL or PAGE_FAULT_IN_NONPAGED_AREA and similar messages.

    As examples:

    BCCode: 116
    BCP1: 87BC9510
    BCP2: 8C013D80
    BCP3: 00000000
    BCP4: 00000002

    or in this format:

    Stop: 0 x 00000000 (oxoooooooo oxoooooooo oxoooooooo oxooooooooo)
    Tcpip.sys - address blocking 0 x 0 00000000 000000000 DateStamp 0 x 000000000

    It is an excellent tool for displaying the blue screen error information

    BlueScreenView scans all your minidump files created during 'blue screen of death '.
    hangs and displays information about all accidents of a table - free
    http://www.NirSoft.NET/utils/blue_screen_view.html

    BlueScreens many are caused by old or damaged, drivers particularly video drivers but it
    are other causes.

    You can do without if needed fail or the Vista DVD or recovery command prompt mode
    Options if your system was installed by the manufacturer.

    This tells you how to access the System Recovery Options and/or a Vista DVD
    http://windowshelp.Microsoft.com/Windows/en-us/help/326b756b-1601-435e-99D0-1585439470351033.mspx

    You can try a system restore to a point before the problem started when one exists.

    How to make a Vista system restore
    http://www.Vistax64.com/tutorials/76905-System-Restore-how.html

    -------------------------------------------------------------------------

    Start - type this in the search box-> find COMMAND at the top and RIGHT CLICK – RUN AS ADMIN

    Enter this at the command prompt - sfc/scannow

    How to analyze the log file entries that the Microsoft Windows Resource Checker (SFC.exe)
    program generates in Windows Vista cbs.log
    http://support.Microsoft.com/kb/928228

    The log can give you the answer if there is a corrupted driver. (Says not all possible
    driver problems).

    Also run CheckDisk, so we cannot exclude as much as possible of the corruption.

    How to run the check disk at startup in Vista
    http://www.Vistax64.com/tutorials/67612-check-disk-Chkdsk.html

    -------------------------------------------------------------------------

    Often drivers up-to-date will help, usually video, sound, network card (NIC), WiFi, part 3
    keyboard and mouse, as well as of other major device drivers.

    Look at the sites of the manufacturer for drivers - and the manufacturer of the device manually.
    http://pcsupport.about.com/od/driverssupport/HT/driverdlmfgr.htm

    How to install a device driver in Vista Device Manager
    http://www.Vistax64.com/tutorials/193584-Device-Manager-install-driver.html

    How to disable automatic driver Installation in Windows Vista - drivers
    http://www.AddictiveTips.com/Windows-Tips/how-to-disable-automatic-driver-installation-in-Windows-Vista/
    http://TechNet.Microsoft.com/en-us/library/cc730606 (WS.10) .aspx

    -------------------------------------------------------------------------

    How to fix BlueScreen (STOP) errors that cause Windows Vista to shut down or restart
    quit unexpectedly


    http://support.Microsoft.com/kb/958233

    Troubleshooting, STOP error blue screen Vista
    http://www.chicagotech.NET/Vista/vistabluescreen.htm

    Understanding and decoding BSOD (blue screen of death) Messages
    http://www.Taranfx.com/blog/?p=692

    Windows - troubleshooting blue screen errors
    http://KB.wisc.edu/page.php?id=7033

    -------------------------------------------------------------------------

    In some cases, it may be necessary.

    The Options or Vista recovery disk Startup Repair

    How to do a startup repair
    http://www.Vistax64.com/tutorials/91467-startup-repair.html

    This tells you how to access the System Recovery Options and/or a Vista DVD
    http://windowshelp.Microsoft.com/Windows/en-us/help/326b756b-1601-435e-99D0-1585439470351033.mspx

    I hope this helps.

    Rob Brown - MS MVP - Windows Desktop Experience: Bike - Mark Twain said it right.

  • Help with error blue screen. BCCode: 116

    Hi, I get the following error message:

    Signature of the problem:
    Problem event name: BlueScreen
    OS version: 6.1.7601.2.1.0.768.3
    Locale ID: 1053

    More information about the problem:
    BCCode: 116
    BCP1: FFFFFA8010AFC4E0
    BCP2: FFFFF8800FC9E7A0
    BCP3: FFFFFFFFC000009A
    BCP4: 0000000000000004
    OS version: 6_1_7601
    Service Pack: 1_0
    Product: 768_1

    You can see here .dmp file:

    https://onedrive.live.com/redir?RESID=ED0BFFB73C652EF7! 126 & authkey =! AFdh-tv9C-zKTsA & ithint = the file % 2cdmp

    Hello

    Error checking 116, {fffffa8010afc4e0, fffff8800fc9e7a0, ffffffffc000009a, 4}

    Probably caused by: nvlddmkm.sys (nvlddmkm + 9a57a0)

    nvlddmkm.sys as of 07/02/2014 Nvidia video drivers.

    fffff880 '0f2f9000 fffff880' 0ff87000 nvlddmkm T (no symbol)
    Loaded symbol image file: nvlddmkm.sys
    Image path: \SystemRoot\system32\DRIVERS\nvlddmkm.sys
    Image name: nvlddmkm.sys
    Timestamp: Wed Jul 02 10:42:02 2014 (53B4446A)

    1. check with Nvidia Support, their drivers and documentation online and ask in their forums

    on known problems. Update the video driver. If there is no newer, you will need to come back
    for a more stable version.

    NVIDIA - drivers - use OPTION 1 to manually enter your info driver to get the most recent drivers.
    http://www.nvidia.com/download/index.aspx?lang=en-us

    NVIDIA Support - check with the support that she might be a known issue
    http://www.nvidia.com/page/support.html

    NVIDIA forums - also check for the forums it might be a known issue or others likely to have
    http://forums.nvidia.com/

    2. check with ASUStek support, their drivers and documentation online and ask in their forums

    on known problems. Updated BIOS, drivers of low level chipset and on-board major and
    separate device drivers.

    BiosVersion = 0205
    BiosReleaseDate = 01/08/2011
    SystemManufacturer = ASUSTeK Computer Inc..
    SystemProductName = CG8565
    Family = Desktop
    BaseBoardManufacturer = ASUSTeK Computer Inc..
    BaseBoardProduct = CG8565
    BaseBoardVersion = Rev 1. XX

    ASUS - Service<-- includes="" live="">
    http://www.service.ASUS.com/

    ASUStek support
    http://support.ASUS.com/

    ASUStek Forums
    http://VIP.ASUS.com/forum/default.aspx?SLanguage=en-us

    ASUStek drivers
    http://support.ASUS.com/download/download.aspx?SLanguage=en-us

    3 use ALL other methods in the troubleshooters below and in the next message.

    =============================================================

    Resolution in Windows 7 stop errors (blue screen) - has a section for if you can or cannot start Windows.
    http://Windows.Microsoft.com/en-us/Windows7/resolving-stop-blue-screen-errors-in-Windows-7

    Check this thread for more information on using BlueScreenView, MyEventViewer and other methods of
    Troubleshoot BlueScreens - answers top 3 (+ 1 more).

    http://answers.Microsoft.com/en-us/Windows/Forum/Windows_7-system/sometimes-i-get-a-blue-screen-when-using-IE-8/c675b7b8-795f-474d-a1c4-6b77b3fcd990

    ------------------------------------------------------------

    References to Vista also apply to Windows 7.

    Have you updated your screen/video or other large recent drivers - check in Control Panel.
    Updates of Windows to see if a driver has been loaded it. Use this generic utility below
    and when you get to the section driver use the methods in the next message and then back to
    the troubleshooter as needed. In rare cases, antivirus/antispyware/security programs can
    cause this error.

    Also check with the support of system Maker and video/display of the map because he could be called
    questions - also check in their forums.

    BCCode: 116 0 x 00000116

    Bug Check 0 x 116: VIDEO_TDR_ERROR

    Bug VIDEO_TDR_ ERROR control has a value of 0 x 00000116. This indicates that an attempt to reset display driver and recover a timeout failed.

    Important info if you received a STOP Code

    If you received a blue error screen, or a stop code, the computer stopped abruptly to protect against data loss. A hardware device, its driver or software might have caused this error. If your copy of Windows is shipped with your computer, contact your computer manufacturer. If you purchased Windows separately from your computer, Microsoft provides support. To find contact information for Microsoft or the manufacturer of your computer, Contact Support.

    If you have experience with computers and try to recover from this error, follow the steps in the Microsoft article solution STOP (blue screen) errors in Windows.

    These actions could prevent a mistake like this does not happen:

    1. Download and install updates for your computer from Windows Update device drivers.
    2. Scan your computer for computer viruses.
    3. Check your hard drive for errors.

    VIDEO_TDR_ERROR settings

    The following settings are displayed on the blue screen.

    Parameter Description

    1

    The pointer to the context internal TDR recovery, if they are available.

    2

    A pointer to the loaded device driver module (for example, the owner tag).

    3

    The error code of the last operation that failed, if they are available.

    4

    Reserved.

    BCCode: 116 0 x 00000116<-- read="" this="">
    * 1275.html http://www.faultwire.com/solutions-fatal_error/attempt-to-Reset-the-Display-Driver-and-recover-from-0x00000116-

    --------------------------------------------------------------------------------

    The inclusion of 116 error in the troubleshooting code is the only coincidence and holds no.
    special meaning (other than pilot caused bluescreens occur with some frequency).

    Look in the Event Viewer to see if something is reported on those.
    http://www.computerperformance.co.UK/Vista/vista_event_viewer.htm

    MyEventViewer - free - a simple alternative in the standard event viewer
    Windows. TIP - Options - Advanced filter allows you to see a time rather
    of the entire file.
    http://www.NirSoft.NET/utils/my_event_viewer.html

    -------------------------------------------------------------------------

    Here are a few ways to possibly fix the blue screen issue. If you could give the blue screen
    info that would help. Such as ITC and 4 others entered at the bottom left. And all others
    error information such as codes of STOP and info like IRQL_NOT_LESS_OR_EQUAL or PAGE_FAULT_IN_NONPAGED_AREA and similar messages.

    As examples:

    BCCode: 116
    BCP1: 87BC9510
    BCP2: 8C013D80
    BCP3: 00000000
    BCP4: 00000002

    or in this format:

    Stop: 0 x 00000000 (oxoooooooo oxoooooooo oxoooooooo oxooooooooo)
    Tcpip.sys - address blocking 0 x 0 00000000 000000000 DateStamp 0 x 000000000

    It is an excellent tool for displaying the blue screen error information

    BlueScreenView scans all your minidump files created during 'blue screen of death '.
    hangs and displays information about all accidents of a table - free

    http://www.NirSoft.NET/utils/blue_screen_view.html

    BlueScreens many are caused by old or damaged, in particular the video drivers drivers however
    There are other causes.

    You can do mode if necessary safe or the Vista DVD command prompt or
    Options recovery if your system is installed by the manufacturer.

    How to start on the System Recovery Options in Windows 7
    http://www.SevenForums.com/tutorials/668-system-recovery-options.html

    You can try a system restore to a point before the problem started when one exists.

    How to do a system restore in Windows 7
    http://www.SevenForums.com/tutorials/700-system-restore.html

    -------------------------------------------------------------------------

    Start - type this in the search box-> find COMMAND at the top and RIGHT CLICK – RUN AS ADMIN

    Enter this at the command prompt - sfc/scannow

    How to fix the system files of Windows 7 with the System File Checker
    http://www.SevenForums.com/tutorials/1538-SFC-SCANNOW-Command-System-File-Checker.html

    How to analyze the log file entries that the Microsoft Windows Resource Checker (SFC.exe) program
    generates cbs.log Windows Vista (and Windows 7)
    http://support.Microsoft.com/kb/928228

    The log can give you the answer if there is a corrupted driver. (Says not all possible
    driver problems).

    Also run CheckDisk, so we cannot exclude as much as possible of the corruption.

    How to run the check disk at startup in Windows 7
    http://www.SevenForums.com/tutorials/433-disk-check.html

    -------------------------------------------------------------------------

    Often drivers up-to-date will help, usually video, sound, network card (NIC), WiFi, part 3
    keyboard and mouse, as well as of other major device drivers.

    Look at the sites of the manufacturer for drivers - and the manufacturer of the device manually.
    http://pcsupport.about.com/od/driverssupport/HT/driverdlmfgr.htm

    Installation and update of drivers under Windows 7 (updated drivers manually using the methods above is)
    to ensure that the latest drivers from the manufacturer of system and device manufacturers are are preferably)
    http://www.SevenForums.com/tutorials/43216-installing-updating-drivers-7-a.html

    How to stop Windows 7 automatically install drivers
    http://support.Microsoft.com/kb/2500967

    -------------------------------------------------------------------------

    How to fix BlueScreen (STOP) errors that cause Windows Vista to shut down or restart
    quit unexpectedly
    http://support.Microsoft.com/kb/958233

    Troubleshooting Vista Blue Screen, error of JUDGMENT (and Windows 7)
    http://www.chicagotech.NET/Vista/vistabluescreen.htm

    Understanding and decoding BSOD (blue screen of death) Messages
    http://www.Taranfx.com/blog/?p=692

    Windows - troubleshooting blue screen errors
    http://KB.wisc.edu/page.php?id=7033

    -------------------------------------------------------------------------

    In some cases, it may be necessary.

    Startup Options recovery or Windows 7 disk repair

    How to run a startup repair in Windows 7
    http://www.SevenForums.com/tutorials/681-startup-repair.html

    How to start on the System Recovery Options in Windows 7
    http://www.SevenForums.com/tutorials/668-system-recovery-options.html

    How to create a Windows 7 system repair disc
    http://www.SevenForums.com/tutorials/2083-system-repair-disc-create.html

    How to do a repair installation to repair Windows 7
    http://www.SevenForums.com/tutorials/3413-repair-install.html

    I hope this helps.

    Rob Brown - Microsoft MVP<- profile="" -="" windows="" expert="" -="" consumer="" :="" bicycle=""><- mark="" twain="" said="" it="">

  • 116 error blue screen (1557 DELL i7)

    original title: blue screen (1557 DELL i7)

    Signature of the problem:

    Problem event name: BlueScreen

    The system version: 6.1.7600.2.0.0.256.1

    Locale ID: 1033

    More information about the problem:

    BCCode:                                              116

    BCP1:                                                   CF644008

    BCP2:                                                   91A3DB86

    BCP3:                                                   00000000

    BCP4:                                                   00000002

    OS version: 6_1_7600

    Service Pack: 0_0

    Product:                                              256_1

    Files helping to describe the problem:

    C:\Windows\Minidump\071110-14508-01.dmp

    C:\Users\BAHMAN\AppData\Local\Temp\WER-30404-0.SysData.XML

    Read our privacy statement online:

     http://go.Microsoft.com/fwlink/?LinkId=104288&clcid=0x0409

    If the online privacy statement is not available, please read our offline privacy statement:

    C:\Windows\system32\en-US\erofflps.txt

    Best Rigard (Bahman Hosseini)

    Hello

    Best chance for a quick solution is to check with the manufacturer of device video and Dell to updated
    driver (or re-install those present).

    Check with Dell technical support, online documentation and drivers and their known forums
    issue.

    Dell support
    http://support.Dell.com/

    Dell support drivers - product manual & warranty Info (left side) - and much more
    http://support.Dell.com/support/index.aspx?c=us&l=en&s=DHS

    Dell forums
    http://en.community.Dell.com/forums/
    ----------------------------------------------------------------------------

    Check this thread for more information on using BlueScreenView, MyEventViewer and other methods
    to troubleshoot the BlueScreens - first two responses.

    http://social.answers.Microsoft.com/forums/en-us/w7repair/thread/8df6485a-50cc-4cdc-BE3E-0f05c7745117

    ---------------------------------------------------------------------------

    Have you updated your screen/video or other large recent drivers - check in Control Panel.
    Updates of Windows to see if a driver has been loaded it. Use this generic utility below
    and when you get to the section driver use the methods in the next message and then back to
    the troubleshooter as needed. In rare cases, antivirus/antispyware/security programs can
    cause this error.

    Also check with the support of system Maker and video/display of the map because he could be called
    questions - also check in their forums.

    BCCode: 116 0 x 00000116

    Bug VIDEO_TDR_ ERROR control has a value of 0 x 00000116. This indicates that an attempt
    to reset the display driver and recover a time-out has failed.

    BCCode: 116 0 x 00000116<-- read="">
    * 1275.html http://www.faultwire.com/solutions-fatal_error/attempt-to-Reset-the-Display-Driver-and-recover-from-0x00000116-

    --------------------------------------------------------------------------------

    Inclusion error code 116 in the resolution of problems is the only coincidence and has no specific
    which means (other than the driver caused bluescreens occur with some frequency).

    Look in the Event Viewer to see if something is reported on those.
    http://www.computerperformance.co.UK/Vista/vista_event_viewer.htm

    MyEventViewer - free - a simple alternative in the standard event viewer
    Windows. TIP - Options - Advanced filter allows you to see a time rather
    of the entire file.
    http://www.NirSoft.NET/utils/my_event_viewer.html

    -------------------------------------------------------------------------

    Here are a few ways to possibly fix the blue screen issue. If you could give the blue screen
    info that would help. Such as ITC and 4 others entered at the bottom left. And all others
    error information such as codes of STOP and info like IRQL_NOT_LESS_OR_EQUAL or PAGE_FAULT_IN_NONPAGED_AREA and similar messages.

    As examples:

    BCCode: 116
    BCP1: 87BC9510
    BCP2: 8C013D80
    BCP3: 00000000
    BCP4: 00000002

    or in this format:

    Stop: 0 x 00000000 (oxoooooooo oxoooooooo oxoooooooo oxooooooooo)
    Tcpip.sys - address blocking 0 x 0 00000000 000000000 DateStamp 0 x 000000000

    It is an excellent tool for displaying the blue screen error information

    BlueScreenView scans all your minidump files created during 'blue screen of death '.
    hangs and displays information about all accidents of a table - free

    http://www.NirSoft.NET/utils/blue_screen_view.html

    BlueScreens many are caused by old or damaged, in particular the video drivers drivers however
    There are other causes.

    You can do without if needed fail or the Vista DVD or recovery command prompt mode
    Options if your system was installed by the manufacturer.

    This tells you how to access the System Recovery Options and/or a Vista DVD
    http://windowshelp.Microsoft.com/Windows/en-us/help/326b756b-1601-435e-99D0-1585439470351033.mspx

    You can try a system restore to a point before the problem started when one exists.

    How to make a Vista system restore
    http://www.Vistax64.com/tutorials/76905-System-Restore-how.html

    -------------------------------------------------------------------------

    Start - type this into the search-> find COMMAND to top box and RIGHT CLICK-
    RUN AS ADMIN

    Enter this at the command prompt - sfc/scannow

    How to analyze the log file entries that the Microsoft Windows Resource Checker
    (SFC.exe) program generates in Windows Vista cbs.log
    http://support.Microsoft.com/kb/928228

    The log can give you the answer if there is a corrupted driver. (Says not all the)
    possible driver problems).

    Also run CheckDisk, so we cannot exclude as much as possible of the corruption.

    How to run the check disk at startup in Vista
    http://www.Vistax64.com/tutorials/67612-check-disk-Chkdsk.html

    -------------------------------------------------------------------------

    Often drivers up-to-date will help, usually video, sound, network card (NIC), WiFi, part 3
    keyboard and mouse, as well as of other major device drivers.

    Look at the sites of the manufacturer for drivers - and the manufacturer of the device manually.
    http://pcsupport.about.com/od/driverssupport/HT/driverdlmfgr.htm

    How to install a device driver in Vista Device Manager
    http://www.Vistax64.com/tutorials/193584-Device-Manager-install-driver.html

    How to disable automatic driver Installation in Windows Vista - drivers
    http://www.AddictiveTips.com/Windows-Tips/how-to-disable-automatic-driver-installation-in-Windows-Vista/
    http://TechNet.Microsoft.com/en-us/library/cc730606 (WS.10) .aspx

    -------------------------------------------------------------------------

    How to fix BlueScreen (STOP) errors that cause Windows Vista to shut down or restart
    quit unexpectedly
    http://support.Microsoft.com/kb/958233

    Troubleshooting, STOP error blue screen Vista
    http://www.chicagotech.NET/Vista/vistabluescreen.htm

    Understanding and decoding BSOD (blue screen of death) Messages
    http://www.Taranfx.com/blog/?p=692

    Windows - troubleshooting blue screen errors
    http://KB.wisc.edu/page.php?id=7033

    -------------------------------------------------------------------------

    In some cases, it may be necessary.

    The Options or Vista recovery disk Startup Repair

    How to do a startup repair
    http://www.Vistax64.com/tutorials/91467-startup-repair.html

    This tells you how to access the System Recovery Options and/or a Vista DVD
    http://windowshelp.Microsoft.com/Windows/en-us/help/326b756b-1601-435e-99D0-1585439470351033.mspx

    I hope this helps.

    Rob Brown - MS MVP - Windows Desktop Experience: Bike - Mark Twain said it right.

Maybe you are looking for