Can connect to internet but not network

Similar Questions

• Connected to internet but not able to access Web sites

  Hello

  I have a Dell Latitude E5410 using Windows 7 ultimate with IE 8

  The laptop seems to be connected to the internet but not able to browse any websites. I checked with IE, Google chrome, firefox as well.

  I disabled the proxy settings in the LAN to internet options, always the same question.

  Reset settings tcp/ip so using winsock reset, reinstalled the drivers and uninstalled and reinstalled browsers and still the same issue.

  restored windows in the last working restore point, still the same problem.

  scanned with the Microsoft Malware removal tool, as well as with both windows defender and no suspects were found.

  Tried all most all the steps online to reset the log ip so also the steps in msconfig that comes as a response to this community, but still the same issue.

  The address sometimes bar said as invalid address and take the url as http:///

  Checked the IP settings and able to ping both Web sites and also windows taking updates.

  The only issue is not able to navigate.

  What else can I do to solve the problem, with about reinstalling windows?

  Kind regards

  Of Shaik

  This means generally that you are connected to your network, but not the Internet.

  If you use a wireless connection, this may mean the wireless network password which is stored in your computer's a mismatch with the router.  Try to connect with a cable.  Try to reset the password of your router wireless and rename your network.

  It is also quite possible that you have no connection to your Internet service provider.  Restart your modem and your router if you have separated.

  If the router is separated, try to connect with a cable directly to the modem.

• Why my Dell laptop can connect to wifi but not get internet through it?

  I have a dell vostro 3400 and I can connect to any wifi network, and while other computers can get internet through them, I can get a limited access. Also, I am running connectify (internet sharing program), a virtual wifi router and I can connect devices, but they cannot get internet through it (even if my laptop is via Ethernet). Is this a hardware problem? Software, OS? I got the model in more than a year and it has always worked perfectly... Thank you!

  xael821,

  Is there a reason that you do not have active DHCP.

  Start, Control Panel, network and sharing Center. Click your network properties. Search for TCP/IPv4 and TCP/IPv6 and click Properties. Have your settings match mine.

  

  Rick

• Can connect to Ethernet, but not on WiFi

  Hello

  I have an Acer Aspire with Vista Home Basic 5735. Had for years. This weekend I decided to clean the laptop; I deleted a bunch of software that I use, with the installation of "Uninstall a program" in the Panel. I then did a disk cleanup, and then use the Disk Defragmenter.
  Now I can't connect to the internet via WiFi. I usually just turn on the laptop and it connects to my router. My router and the provider are unchanged for a few years now. Although when I click on "Connect To", it shows that I am connected, but with limited access. Limited access is actually no access, given that I can't open Chrome or any other software that requires a connection.
  I know that the router is fine, because my second laptop, a laptop, works great today by the VPN over WiFi, as he always does.
  I plugged in an ethernet cable, and with that I can get on the internet. I went through all the tips I've found - checking drivers corrupt, do a Windows Update, restart (several times), running the network on the network diagnostics, but nothing helped.
  I assume that in the weekend cleaning, I must have deleted a vital file. Any suggestions for how I can restore WiFi ability?
  Thank you

  Hi, Simon,.

  Start, Programs\Accessories and right click on command prompt, select "Run as Administrator" to open a command prompt.
  In the command prompt window that opens, type type the following commands:
  Restore the default install WINSOCK entries: netsh winsock reset catalog
  Reset the battery TCP/IP IPv4 default installation. netsh int ipv4 reset reset.log
  Reset the battery TCP/IP IPv6 default installation. netsh int ipv6 reset reset.log
  Reboot the computer.

  Try the solutions listed:

  http://answers.Microsoft.com/en-us/Windows/Forum/windows_xp-networking/wifi-attempting-to-connect-but-not-no-error-works/4ae17194-ad84-4f49-b87c-9923fd6598ae

  Check your driver

• Cannot enter data on Web sites, can connect and discover, but not enter data

  I use Firefox for many years without any problems, but just recently, although I can connect to any site and discover anything, I can't enter data. For example if I type a comment on Facebook, I can't post, nothing happens. Similarly, I can make payments online through my line on the Bank's website. In the meantime, I use IE 11.0 instead of 35.0 Firefox but it's a nuisance. Any idea what could be the cause?

  Very strange, the problem is now gone, I can do messages and payments without problems that I mentioned at the outset. Only difference I can see, is that I now use Firefox 35.0.1. In any case, my problem disappeared, so I won't spend much time on development why it happened.
  However, thanks for the suggestion

• When you use Firefox - loging in Yahoo mail - see account but then get error page said I less than 1024xx600 resolution - have new computer and set at 1600 x 900, cleared out background etc. but does the same thing - can connect w/chrome, but not firefox

  I don't know what else to say

  This can happen if you zoom in Yahoo mail websites.
  
  Yahoo uses a script to check the dimensions of the screen and zoom in a page affects the parameters width and height window and screen.

  Reset the zoom of page on pages that are causing problems.

  • View > Zoom > reset (Ctrl + 0 (zero); Cmd + 0 on Mac)
  • http://KB.mozillazine.org/Zoom_text_of_web_pages

• I am connected to the internet, but my network sharing Center proclaims that I'm not.

  The paradox connected but not connected

  I am connected to the internet, but my network sharing Center proclaims that I'm not. Because some of my programs believe later, they refuse to patch. Also, I used the antivirals ware, scans, System Configuration and deleted and later restored the wireless network.

  Any help would be greatly appreciated. Thanks in advance.

  Hello

  1 reboot as often, this allows the refresh icon and also stops a few things of
  interfere with the slot troubleshooting process.

  Do a 1 Restore Point then you can go back to where you were if necessary.

  How to create a Vista System Restore Point
  http://www.Vistax64.com/tutorials/76332-system-restore-point-create.html

  ------------------------------------------------------

  Control Panel - network - write down of the brand and the model of the Wifi - double click top - tab of the driver - write
  version - click the driver update (cannot do something that MS is far behind the pilots of certification). Do
  It will be the same for network (NIC) card - then right click on the devices and UNINSTALL - Reboot -
  update the driver stacks.

  Now go look at the site of the manufacturer of the system for the updated drivers.

  After watching the system manufacturer, you can check the manufacturer of the device an even newer version. (The
  manufacturer of system become your backup policies).

  Look at the sites of the manufacturer for drivers - and the manufacturer of the device manually.
  http://pcsupport.about.com/od/driverssupport/HT/driverdlmfgr.htm

  How to install a device driver in Vista Device Manager
  http://www.Vistax64.com/tutorials/193584-Device-Manager-install-driver.html

  Download - SAVE - go where you put it - right click – RUN AS ADMIN.

  You can download several at once however restart after the installation of each of them.

  Repeat for network (NIC) card and is a good time to get the other updated drivers as Vista like
  updated drivers.

  If you update the drivers manually, then it's a good idea to disable the facilities of driver in the Windows updates,
  This leaves ONE of Windows updates, but it will not install the drivers who are generally older and cause
  questions. If updates offers a new driver and then hide it (right click on it) and then go look for new ones
  manually if you wish.

  How to disable automatic driver Installation in Windows Vista - drivers
  http://www.AddictiveTips.com/Windows-Tips/how-to-disable-automatic-driver-installation-in-Windows-Vista/
  http://TechNet.Microsoft.com/en-us/library/cc730606 (WS.10) .aspx

  -----------------------------

  Allow you to reset your TCP/IP stack just to make sure:

  Start - type in search - ORDER - search box at the top of list and RIGHT CLICK – RUN AS ADMIN

  Enter these one at a time (or copy and paste) and press ENTER after each

  ipconfig/flushdns

  nbtstat-r

  nbtstat - RR

  netsh int Reinitialis

  netsh int ip reset

  netsh winsock reset

  Reset

  ----------------------------------

  Make sure you know the details of connection to your wireless router - SSID and password.

  You lose connection when you do and have to redo your logon.

  Control Panel - Network & Sharing Center - right, click Customize - page set of network locations.
  lower left click on merge or delete network locations - REMOVE all instances of your network (and the
  others you don't use anymore) - REBOOT.

  ---------------------------------
  Other tips:

  If the use of a wired cable - Control Panel - device - network adapter - (NIC) Manager - double
  Click Advanced settings and set the "speed & Duplex" 10 Mbps full duplex and then try 1/2
  double-sided. Be sure to APPLY / OK. Maybe some help here: (don't forget the answer is)
  complicated because there's probably more than one single thing, the origin of the problem)

  Others.

  http://www.pctipstricks.com/tips-for-troubleshooting-network-cable-unplugged-error-for-wired-Microsoft-platform-PCs/

  http://www.how-to-hide-IP.info/2009/05/16/CYBERGHOST-VPN-fixing-network-cable-unplugged-error/

  http://www.annoyances.org/exec/Forum/WinXP/1109372091

  There are many causes, one of which is the small monitor pays attention to the evil network device.
  You can try to disable any other network such as WiFi device and reboot to see if that has an effect.

  Still a problem of equipment such as a loose network card that is not properly attached to the computer can
  cause this.

  http://compnetworking.about.com/od/WindowsNetworking/f/cableunplugged.htm

  I hope this helps and happy holidays!

  Rob Brown - Microsoft MVP<- profile="" -="" windows="" expert="" -="" consumer="" :="" bicycle=""><- mark="" twain="" said="" it="">

• HP Photosmart 6510 series connects to the network and Internet, but not the computer.

  Hey all,.

  I have a desktop H8-1228 and 6510 e - printer.  I got both products at the same time.  I did the initial installation, and everything worked perfectly.  I was able to print of my HP Touchpad (the printer was on the floor and my Touchpad was down.).  Recently, I made a trip for two weeks.  I turned off the printer.  This seems to have been a mistake.  Now, he will only contact my network and Internet, but not the computer.  The Setup program keeps telling me that it is 'Impossible to find the printer' and that he wants me to check the IP address of the printer.  I did this many times by printing the HP's Configuration Page from the printer screen.  I also used Windows "Add a printer" without success.

  I have installed and uninstalled the software several times; every time that remove the icon of the printer and the Standard TCP/IP port in the "Devices and printers" section in Control Panel.  A few minutes earlier, I used Regedit to delete any reference to the series of HP Photosmart 6510 in the registry, believing that it could help my situation.  There can be no. :-(  I did the installation with the same problems that I had all the other times that I tried to install it.

  No help from you the printer experts will be greatly appreciated.  I'm not a novice as you can see.  This situation, however, launched my posterior. :-))

  Hi old_geekster,

  You may want to enable disable all startup programs in msconfig until you are able to access the Web integrated printer server. It seems that there is something in the communication with the printer's operating system blocking. It will most likely software firewall or security related.

  HP has designed a quick and easy tool that diagnoses and solves many problems of printing, scanning and connectivity: The HP Print and Scan doctor. HP recommend you to download and install Print and scan doctor no matter what time you need to solve a problem with your HP printer from the link below.

  I would like to know what are the errors you receive?

  http://www.HP.com/go/tools

• Wireless laptop running Vista 32 and wired desktop under Vista 64 can access Internet, but not each other!

  My laptop Vista 32 unreal access router and ping its own IP address, but no access to Vista 64-bit Wired Office with ping or try to access folders shared I place some months ago and used without problem until about 2 days ago. I recently did a restore of the laptop but it worked after that and I adjusted all the settings. I have Net bios over TCP/IP enabled on both machines. I have two machines on the workgroup and file sharing is enabled on both. Vista 64 desktop computer can access the Internet but can not access the shared folders that I put in this PC! He cannot ping the router either but can be accessed via the routers Web page. The router is configured correctly as well. I became a master browser errors on Vista 64 desktop until I changed the registry on the laptop off car with respect to the list of servers. I'm a computer technician with networking experience, but am confused on this one. There are so many problems over there near the mine, but they usually have xp machines trying to access Vista or vice-verse. In addition, they cannot access the Internet generally. If anyone out there has any intelligent suggestions I'm desperate, but know that I have this research completely so guess I did all the basic troubleshooting to save time you and me. Thanks in advance to anyone with advice!

  Rick Saunders

  12-09-2010

  Hey thanks for getting back to me, I wanted to let you know that I could solve the problem! I'm not sure excatly what the problem was, but I went and bought a fixed register a program so that I paid for, as you no doubt know the free just ruin your machine more than it is useful, well I ran that and restarted and BOOM! Now even if I can connect to each computer and the internet. I'm still not able to ping? Now when I say that this is not so much genral, the laptop I can ping any name of site Web and number but not the PC. On the PC I can ping its own IP address but not the router or laptop? But it has no bearing on anything so I anticipate leaving me well enough alone. I how ever to download a graphics professional ping program, but not to worried about it! Thank you so much for you help and if I need more help, I hope you are avalibale!

  Rick Saunders

  The coach of the computer, LLC

• I am able to connect to internet but when I switch to the amother user account it does not connect to internet

  on my computer, I am able to connect to internet but when I switch to the amother user account it does not connect to internet

  Hello

  1. Is there an error code or the message that if displayed when it is unable to connect to the Internet?
  2. You use a wired connection or wireless?
  3. You use the administrator account or standard account?
  4. All changes made to the computer before the show?
  Method 1:
  Check out the link and follow the steps.
  Windows wireless and wired network connection problems
  http://Windows.Microsoft.com/en-us/Windows/help/wired-and-wireless-network-connection-problems-in-Windows
  Method 2:
  Visit the link and try the troubleshooting provided steps.
  Why can't I connect to the Internet?
  http://Windows.Microsoft.com/en-us/Windows7/why-can-t-I-connect-to-the-Internet

• I can access the internet but can no longer send or receive mail. I get a message that the POP 3 Server has not responded.

  I can access the internet but can no longer send or receive mail. I get a message that the POP 3 Server has not responded. Nor do the SMPT server. 0x800CCC19 error number is given in both cases. I have no help when I type the error number in the help Windows Mail. How can I solve this problem?

  original title: can't send or receive emails.

  Tools > accounts > select your account > properties > Server tab, ensure that 'Connect with password' is not enabled.

  Or you might want to try the new port settings.
  http://www22.Verizon.com/residentialhelp/highspeed/email/setup+and+use/questionsone/124289.htm

• I'm unable to access my computer (windows 8) with my microsoft account. The password works for the connection to outlook on the internet, but not the computer.

  Original title: connection problem

  I'm unable to access my computer (windows 8) with my microsoft account. The password works for the connection to outlook on the internet, but not the computer.

  The message I get when trying to connect is simply that I cannot connect you at this time and that I should follow a link to reset the password - what I've done without result. The computer is connected to the internet.

  Hello

  Thanks for posting your query on the Microsoft Community.

  With the publication of the description, I understand that you are unable to access your computer using Microsoft password account on the machine Windows 8. I will certainly help you get this problem.

  I would be grateful if you could help me with more information:

  1. Since when you are facing this problem?

  2. What is the exact error you receive by accessing the computer?

  I would say to you follow the suggestions provided by Cliff_N responded on 7 December 2012 in the below thread Microsoft:

  http://answers.Microsoft.com/en-us/Windows/Forum/windows_8-security/why-cant-i-sign-into-Windows-8-with-my-Microsoft/7662ea57-c321-4bfe-84e9-fc9ebb87a44b?TM=1355519512755#_self

  Important information: When you use system restore to restore the computer to a previous state, the programs and updates that you have installed are removed.

  Note: When updating, the applications you have installed Web sites and DVDS is deleted. The applications provided with your PC and applications that you have installed in the Windows store will be resettled. Windows puts a list of apps removed on your desktop after you refresh your PC.

  For more information, you can consult the Microsoft article.

  What to do if you forget your Windows password

  http://Windows.Microsoft.com/en-us/Windows/what-do-forget-Windows-password#1TC=Windows-8

  Hope this information is useful. Please come back to write to us if you need more help, we will be happy to help you.

• Hi I'm trying to install windows 7 in my xp service pack 2... but I often get error code: 0 * 80070005... indicating that I was not connected to internet.but, in fact, I was connected to internet

  Hi I'm trying to install windows 7 in my xp service pack 2... but I often get error code: 0 * 80070005... indicating that I was not connected to internet.but, in fact I was connected to internet... pls sumone help me solve this problem!

  Boot from the Windows 7 DVD
  Click Install now
  Accept the license agreement
  When the option is displayed to select a type of installation, click (Custom advanced)

  Select the disk partition where you want to install Windows 7 click Next.

  You will receive the following warning:

  The partition you have selected may contain files from a previous Installation of Windows. If so, these files and folders will be moved to a folder named Windows.old. You will be able to access the information in Windows.old, but you will be able to use your previous version of Windows.

  (At all costs, do NOT click on anything in Format, deletion or Partition name.) So even do a custom installation, your personal files are still kept. Click OK

  The installation program will now begin installation. During installation, your computer will be restarted several times.

  Once the installation is complete, you can complete the Out of Box experience as the choice of your laptop, create a username, password, your time zone. You can then proceed to download the latest updates for Windows and reinstall your applications and drivers.

  You can then retrieve your personal files from the Windows.old folder and reinstall all of your applications and drivers.

  http://notebooks.com/2010/11/09/how-to-recover-documents-music-and-email-after-upgrading-with-the-Windows-old-folder/

• Clicking on the tab help for help with photoshop first time get in "photoshop online help could not be displayed because you are not connected to internet" but I'm connected to the internet?

  Dear all

  I need help with the following problem:

  Clicking on the tab help for help with photoshop first time get in "photoshop online help could not be displayed because you are not connected to internet" but I'm connected to the internet.

  Appreaciate help on this problem.

  MSD

  I find it easier and faster to use just this link, which goes to the same place as aid > online help for Photoshop:

  Using Photoshop | Photoshop help

  To bookmark so that you can find.

• I can't connect on the section "browser widget. I have an Adobe ID account, I can connect to that, but when I try to go through dreamweaver, I can not connect. Any suggestions?

  I can't connect on the section "browser widget. I have an Adobe ID account, I can connect to that, but when I try to go through dreamweaver, I can not connect. Any suggestions?

  Widget Browser is long gone.  Adobe stopped quite earlier.  The widgets were outdated and 3rd developer were not very keen on keeping them.

  Use the Adobe Exchange panels.

  Or look at jQuery Plugins.