can connect you two computers so you can see other people screen

Similar Questions

• Web cam problem, using Skype... I can see other people, but they cannot see me...

  original title: web cam problem

  using Skype... I can see other people, but they cannot see me...

  Hello

  Be sure to contact the Skype Support like this might be a known issue and they might have the solution.
  There is also information and on the Skype Forums.

  Skype - Support
  https://support.Skype.com/en-us/

  Skype - Forums
  http://Forum.Skype.com/

  Also check with the manufacturer of the system, their drivers and documentation support online and ask
  their forums (if any).

  ============

  You will probably need to reload the drivers of the device and any camera control software.

  Login as an administrator.

  Double-click Control Panel / Device Manager - Imaging - writing down of the brand and model of camera.
  on this subject and on the tab of the driver is version. Now, click on update drivers (who are unable to do anything as MS
  is far behind the pilots of certification). RIGHT click on the camera - UNINSTALL - REBOOT - it
  will update the driver stack.

  Now, go to the system manufacturer's website and download the latest driver for the camera and the other related camera
  software (if not more recent get the same).

  Download - SAVE - go to them and RIGHT CLICK - RUN AS ADMIN - reboot after each driver.

  Look at the sites of the manufacturer for drivers - and the manufacturer of the device manually.
  http://pcsupport.about.com/od/driverssupport/HT/driverdlmfgr.htm

  How to install a device driver in Vista Device Manager
  http://www.Vistax64.com/tutorials/193584-Device-Manager-install-driver.html

  Then let windows updates on however prevent loading of drivers who are often older than the
  those that you have installed. If updates suggests a pilot and then HIDE it and watch manually to see if their
  really is a more recent version (at the time system manufacturer and the sites of the manufacturer of the device).

  How to disable automatic driver Installation in Windows Vista - drivers
  http://www.AddictiveTips.com/Windows-Tips/how-to-disable-automatic-driver-installation-in-Windows-Vista/
  http://TechNet.Microsoft.com/en-us/library/cc730606 (WS.10) .aspx

  I hope this helps.

  Rob Brown - Microsoft MVP<- profile="" -="" windows="" expert="" -="" consumer="" :="" bicycle="" -="" mark="" twain="" said="" it="">

• Try to set up a direct parallel connection between two computers in Windows XP Home edition

  I tried to set up a direct parallel connection between two computers in Windows XP. I have the right cable (CAT 5 Ethernet connection) and you can set up the connection on my own laptop, but when I go through the installer on another laptop it create new connection-establishment of advanced connection--> when the next window opens asking me to choose between "accept incoming connections" and "connect directly to another computer" (which I need to select) for the second option is grayed out and not can not be selected.

  The same thing happens when I try to implement the same connection between my laptop and the desktop we have. All of these computers are running on Windows XP service pack 2. I really need help with this because I'm about to start pulling my hair.

  Any help would be very, very, much appreciated.
  Thank you

  Hello

  Check it please this subject http://forums.computers.toshiba-europe.com/forums/thread.jspa?threadID=3423&messageID=11170

  I hope this will help you.

• I can see other computers on a network of peer to peer windows XP but cannot access their shared files and the shared printer.

  I can see other computers on a network of peer to peer windows XP but cannot access their shared files and the shared printer. The computers are connected by a switch, fixed IP addresses that are correctly configured and point to a DNS server outside the network. When I try to open the icon for one of the computers, he asked for credentials. I try to type the user name for the computer that is sharing the resource and the password. It is the user account whose computer is loged on and belongs to the Administrators group. for example: user name (Computer1\username) password (password). It does not work. The Windows Firewall is disabled on all computers. It worked well there 2 days. I can't find anything wrong with the network settings. Does anyone have a solution? Thank you.

  If the portion of the machine has activated - Simple file sharing (i.e. it is XP Home or it is XP Pro with Simple (default) file sharing) - while all file sharing connections authenticate as user 'guest '.  It will not matter what username / password you provide, it will attempt to authenticate as 'guest '.  If the guest user has received a password or the guest account is not active, you will experience the symptoms you describe.

  If the serving machine running XP Pro and Simple file sharing is disabled, then you should be able to connect by specifying the user as computer\user and the password to connect.  To turn off Simple file sharing:

  "How to disable the file sharing simple and how to set permissions on a shared folder in Windows XP"
    <>http://support.Microsoft.com/kb/307874 >

  Also:
  "Description of the account in Windows XP"
    <>http://support.Microsoft.com/kb/300489 >

  HTH,
  JW

• Warning: you are connected to two computers.

  I was working in my account to windows live hotmail and when I tried to open an email (at least, I think that's what I was doing at the time).  I got a pop up message that says I was logged into two computers and my email was not available and I have to refresh the page, I did.

  My question is: this message really means that someone else somewhere else was connected to my email?

  Hotmail forums:

  http://www.windowslivehelp.com/forums.aspx?ProductID=1

  They will help you when repost you your question in the Forums above for Hotmail.

  See you soon.

  Mick Murphy - Microsoft partner

• How to configure a direct cable connection between two computers in Windows 7

  Hello

  I'm trying to set up a connection by serial cable with serial cable RS232 DB9 female-female between 2 PCs, one with Windows 7 and Windows 8.
  
  For the initial check of the cable, I used a terminal program such as HyperTerminal, PuTTY, RealTerm. But none of the PC was able to read/write data from the port. I shorted her transmit and receive pins (2 & 3) at one end with a jumper (PIN stapler) for a loop to return the data to the Terminal. Terminal exits each letter typed twice, that is to say the cable and the COM port works correctly for two computers. But with 2 PCs connected, the Hyperterminal does not output nothing written of another PC Hyperterminal.
  Possible suspects: -.
  1. in the device-> PORTS (COM and LPT) Manager - there are 3 elements in both PC
  Communication Port (COM1), Communications Port (COM2), the Printer Port (LPT1).
  while I plug / unplug the cable at the PC, nothing changes in this section.
  2. the drivers for this type of cable to not installed.
  3. different OS installed on the PC.
  4 or I have to create a new connection , and then connect directly to another computer as mentioned in http://support.microsoft.com/kb/305621/en-us . But I didn't know how to do these steps in Windows 7/8.
  Any idea about this problem is appreciated.

  The problem is your trying to use both ports 'exit' to connect two computers / never going to work.

  VGA ports are for v's t. 'If' they are able to c.p.. otherwise, you will need to use a HDMI to the TV which is also an exit from the c.p.

  If you notice your computer and your monitor using a DVI port connection not a VGA.

  And no you can not use a DVI cable either :)

• How to stop the connectivity between two computers that use the same IP address... ?

  Today, I managed to connect two computers with the same IP address. But now it is to be feared. for example, a person can access my computers using my IP and MAC address. So now, how can I stop the connectivity between these two computers. should what setting I use to stop.

  Tahnks.

  Hello

  1 have. what measures you taken to connect 2 computers with the same IP address?

  2. How are the 2 computers connected?

  3. how exactly you want to stop the connectivity between 2 computers?

  I want to tell you that 2 computers on the same network cannot have the same address. Each machine must have a unique address to identify it. A private network, as a home network connected to the internet, can be connected to a router to connect to the network, will have only 1 address, public IP address.

  In addition, if we know the IP address of a computer along the user ID and password, we can access the computer/shared files.

   
  If you are referring to the change of the IP address of the two computers, you can follow these steps and check.
   
  a. network connections open. Click the Start button, and then click Control Panel. In the search box, type 'adapter' and then, under center network and sharing, click view network connections.
  b. right click on the connection you want to change. Click on properties. If you are prompted for an administrator password or a confirmation, type the password or provide confirmation.
  c. click on the network tab. Under this connection uses the following items, click Internet Protocol Version 4 (TCP/IPv4) or Internet Protocol Version 6 (TCP/IPv6), and then click the properties button. To specify your IP for IPv4, click on use the following IP address, and then, at the address IP, subnet mask, and gateway boxes by default, type IP address settings.
   
  A typical IPv4 address looks like 192.168.0.2; a typical subnet mask is 255.255.255.0. The default gateway is usually the address of your router.
  For example, IP address: 192.168.0.2 by 192.168.0.12 (for computers)
  Subnet mask: 255.255.255.0
  DNS: 192.168.0.1
   

  I hope this helps. If you have any other queries/issues related to Windows, write us and we will be happy to help you further.

• is it possible to establish a direct connection between two computers, one running on windows xp sp2 and other running on windows xp sp3?

  Hello
  I connected two computers, one running on windows xp sp2 and others running on windows xp sp3 via com using RS232 port via link Modem DFM-562E ++.
  I am able to dial numbers from a PC successfully.
  But when I do a direct link between them (one as a host, the other guest) through the com port, I get error 777.
  Is this because the two PC's using different service packs?
  Help, please.
  Thank you & best regards
  Ravi

  It is not the service pack - although you should have installed sp3 now.

  Your message is not clear: have you been able to connect successfully computers using your modem D-Link?  How did you do that?  Will there be a modem in the second computer?

  What cable are you using to establish a direct connection between the com ports on both computers?  If you have purchased this cable online, please provide a link to the site where you bought it.

  Please describe the physical connection between the two computers.  For example, this is how you connect to the Internet by dial-up services:

  computer 1-{(9 broches) RS-232 serial port}-{RS-232 cable supplied with the modem}-{modem}-{phone cord (RJ-11 modular plugs at each end)}-{telephone wall jack}

• Computer laptop Windows 7 can see other wired PC via a wireless connection by specifying the box "search programs and files" drive letter in the start menu, but not in the network screen

  My laptop with Windows 7 (64-bit) can not see the other desktop PC running Windows XP via a wireless connection, except if it is plugged into my laptop so only I can see them on the network.
  I checked all the working groups to ensure that all are the same.

  However, when my laptop into Wi - Fi, I could see the other wired desktop PC by specifying the network path in "search programs and files" to the start menu in the Windows 7 laptop, I was able to add network folder by specifying the drive letter for the connection and file I want to connect via a right click on the network to connect a network drive...

  Then, finally I can access any other desktop pc wired to shared folder via the Wi - Fi by this method.

  But I still don't see them on eventhrough network I can access by this method. Please help me solve this problem.

  Hi Hkway,

  • You are able to see the Windows 7 machine Windows XP computer when connected through wireless and if it is accessible through network?

  First of all, check if the NetBIOS protocol is installed on your Windows XP computer. To install the NetBIOS Protocol, follow these steps:

  1. click on start, click on Control Panel and then double-click network connections.

  2. right click on the card that you want to add NetBEUI to and then click Properties.

  3. on the general tab, click on install.

  4. click on Protocol and then click Add.

  5. Click to select NetBIOS protocol in the list, and then click OK.

  6. restart your computer.

  Also make sure that NetBIOS over TCP/IP is enabled in the Windows XP computer. To do this, follow these steps.

  Turn on NetBIOS over TCP/IP

  1. click onStart, click on Control Paneland then click on network connections and Internet.

  2. click onnetwork connections.

  3. right click onLocal area connectionand then click Properties.

  4. click onInternet Protocol (TCP/IP)and then click Properties.

  5. click on the tabgeneral and then click Advanced.

  6. click on theWINS tab.

  7. underNetBIOS setting, click Enable NetBIOS over TCP/IP, and then clickOK twice.

  8. click onclose to close the local area network connection properties dialog box.

  9. close the network connections window.

   

  After following the above steps, check if you can access the computer Windows XP of Windows 7 computer using the wireless connection.

  I hope this helps. Let us know the results.

  Thank you and best regards,

  Srinivas R

  Microsoft technical support.

  Visit ourMicrosoft answers feedback Forum and let us know what you think.

• Creating cloud incorrectly stating that I am connected on two computers

  I am connected to creative cloud on a single computer, and when I try to connect on another told me I am already connected to a maximum of two computers. Please someone answer could Adobe for this as soon as possible, or give me contact information for support CC?

  Chat now button down for the Activation and the deactivation of the problems can help

  http://helpx.Adobe.com/x-productkb/policy-pricing/activation-deactivation-products.html

  or

  Remove the license on a computer http://forums.adobe.com/thread/1442423?tstart=0

  -http://helpx.adobe.com/x-productkb/policy-pricing/error-maxium-acitvation-exceeded.html

• d link wireless connection manager I'd see other people names

  When I had first of all d-link WiFi on, ws there only son the name, in the box, for my pc June, nowv I marine 3 other people in the area, showing a link

  Don't know what you're referring to... it could be it's gives you a list of nearby adapter wireless networks is 'view '.  It's probably normal.

  In any case, you are off-topic since this is the forum for the users of the software program Microsoft Security Essentials (MSE) antimalware and that your question is not relevant for the use of MSE.

  If you have other questions you suggest to contact D-Link Support: http://www.dlink.com/support/

  Kind regards...

• My printer is connected to two computers. I find that the second computer does not print unless the first computer is also on. Can I get every computer to print without the two be on?

  the printer has been first on windows 7 and second on windows xp, because that's the way I was told iy had to be done. But I thought that each computer can print separeately withou t windows 7 being on.

  Hello

  1. How is the printer connected? This printer is on a network?
  2. this configuration was already working before?

  You must configure a print server. If your printer is a network printer, you can connect it to a router, and all computers connected to this router can use the printer individually. If the printer is not a network printer, you can buy the equipment to turn it into one.

  See the articles below for more information:
  http://support.Microsoft.com/kb/308028
  http://TechNet.Microsoft.com/en-us/library/bb457001.aspx

  I hope this helps.

• Problem with the connection of two computers with windows7 to internet at the same time with wrt110

  Me and my friend have two windows7 installed on our computers.

  If one connects to the internet via a WRT110 wireless router it goes without any problems.

  But if we both try to connect to the internet at the same time, it does not connect.

  Can anyone help?

  You can try the upgrade/flashing the firmware on the router... Download the firmware from www.linksys.com/downloads and save it on the desktop... Opening of session in the Linksys GUI and click on the Administration tab... Click on the "firmware upgrade" sub-tab and choose the correct .bin file... click on upgrade... Wait a few seconds until it shows that "the update is successful," after the upgrade of the firmware, click on "Reboot" and you will be returned to the same page OR it will say 'cannot display the Page.

  Now, hold down the button to reset for 30 seconds... Release the reset button... Unplug the power cable from your router, wait 30 seconds and reconnect the power cable... Now re - configure your router...

• How to share internet connection between two computers (win7 & win XP)?

  "I plan to get cable internet connection ADSL broadband." And again, I want to share internet from one computer to another. »
  

  • But I have a question in mind which is lower.

  Before going to answer my Question Please read two notes point-
  
  Note:

  A. very important don't ask me what I have installed and what equipment I have in my PC? just give me a simple, easy answer. guess I'm no networking and I have two PCs. You teach me from scratch.

  B. do not use the more technical term. I hate it when someone using the most incredible technical term (its towers the response in the largest number of questions lol). just give me a simple answer.

  If you are eligible to condition or except my EULA :) go further and read my questions give me an answer simple and straight.

  Now please read the question below.

  Issues related to the:

  Q1. Which computer should I connect main internet connection (computer on which will better host win7 or Win XP)?
  
  Q2. What equipment I mean as a router, hub, NIC etc.? Please specify if these materials will be required for two PCs or for one.
  
  Q3. What type of Internet connection sharing will be better to be wired or wireless (cost, speed and security wise)?

  Q4. I need two IP address both part of connection to the internet between two PCs?

  Thanks in advance.

  Hi Zeff,

  You can make Windows 7 the main computer for internet connection and then host the Windows XP computer.

  For more information, see the article:

  Start here to set up a home network in Windows 7

  Networking of computers running different versions of Windows

  With respect to the equipment as a router, hub, NIC depend on the connection (wired or wireless) you want to use. You can also check with the ISP (Internet Service Provider) for more information.

  For more information, see the articles:

  What do I need to connect to the Internet?

  Setting up a network home

  Wired and wireless connections have great benefits, but they have also some disadvantages.

  Wired connection:

  > Faster and more robust than wireless connections but not so flexible when positioning of computers and devices because you must be connected to your Super Hub with an Ethernet cable.

  > Safer than wireless connections, but not so convenient for users of laptops and other mobile devices.

  WiFi connection:

  > Wireless! If you can connect when you want. However performance may be affected by walls, electric interference etc.

  > Ideal for users of laptops and other mobile devices, you can connect devices more but slower than wired connections

  > Very safe when used with higher level (WPA) encryption. You can connect your smart phone to your network wirelessly for faster browsing.

  However, unauthorized users could try to use your connection (which explains why security is so important).

  There are two types of IP addresses. external and internal. Both computers have the same external IP address but separate internal IP addresses. Each device in your network will have its own (internal) IP address. The external IP address, who sees the Internet is actually assigned to your router.

  Hope the helps of information. Let us know if you need help with Windows related issues. We will be happy to help you.

• HP 2710 m monitor connected to two computers

  How to switch between hdmi and VGA with 2 computers.  I have 2 computers connected to one monitor.

  Hello

  Push the menu button of the monitor and go to source CONTROL and select your video source desired.

  You might get lucky and see ENTRY VIDEO SWITCH when you first enter the menu of the monitor.  It is dependent on monitor.