Can dedicated memory too low, I buy a graphics card to sort the problem?

Similar Questions

• The volume of the recorded sound is very low when played. I tried to solve the problems through Control Panel of configuration-sound options and increased the volume to 100 form my mic too. All the other volume options, it's 100 too. It has no effect. Hel

  The volume of the recorded sound is very low when played. I tried to solve the problems through Control Panel of configuration-sound options and increased the volume to 100 form my mic too. All the other volume options, it's 100 too. It has no effect. Help needed ASAP

  Hello

  Control Panel - SOUNDS - Audio peripheral devices configuration-manager

  Make sure you write down the description and model double click top - tab drivers - write version. Now
  Click on update drivers who cannot do anything like MS is far behind the certification of drivers. Then RIGHT
  CLICK above and UNINSTALL - REBOOT - this will rebuild the driver stack.

  If your driver shows 06 you have the default windows and part of the question.

  Go to the system manufacturer's website and get the latest Audio/Sound drivers - download - SAVE - go to the place where you
  Put them - right click on Reboot - RUN AS ADMIN -.

  Check the Version on the tab of the driver in the device as a sound Manager often restoring drivers, then install
  the current version. Restart and check after each try, not uncommon to have to run the pilot of 1 to 4 times or more.
  Just make sure that the version you have installed appears in the tab of the driver.

  Then navigate to the site of the manufacturer of the device and search for the drivers more recent and repeat the installation procedure.

  Look at the sites of the manufacturer for drivers - and the manufacturer of the device manually.
  http://pcsupport.about.com/od/driverssupport/HT/driverdlmfgr.htm

  How to install a device driver in Vista Device Manager
  http://www.Vistax64.com/tutorials/193584-Device-Manager-install-driver.html

  ---------------------------------------------------------

  After the updated driver.

  Click with the right button on the speaker near clock - recorders - right click in the box - check show disconnected devices
  and show disabled devices - check your micro - highlight them, then lower right properties. Do
  of course the appropriate injector is enabled and check that other settings - on the levels tab make sure MUTE is not checked
  and APPLY / OK changes.

  Also in the search for some Audio Manager Panel (perhaps named after the manufacturer of the sound driver). Mine
  is the RealTek Audio Manager, yours can be quite different name if you have one.

  How to activate Audio devices hidden in Vista
  http://www.Vistax64.com/tutorials/143447-audio-device-enable-hidden-devices.html

  Connect one microphone, music player or other audio device to your computer
  http://windowshelp.Microsoft.com/Windows/en-us/help/b0e3d7fb-1b4a-4926-8254-65da289209261033.mspx

  Problems with sound and audio or no sound - a Mr Fixit
  http://support.Microsoft.com/GP/NO_SOUND

  I hope this helps.

  Rob - bicycle - Mark Twain said it is good.

• My resolution continues to go too low and it is very difficult to read the screen

  I HAVE PROBLEMS WITH MY RESOLUTION-IT IS TOO LOW AND WILL NOT CHANGE

  I went to the Windows Update Catalog and typed in "video drivers" and he gave me 958 choices on 39 pages and I wonder where is should I choose - or should I just try them one at a time?

  It's usually stupid to accept any peripheral material updated from Microsoft - driver unless you want problems.

  You should always get your device updated the driver from your hardware manufacturer.

  As the forums MS Answers does not prompt for any information system when a new question is asked, we don't know anything about your system.

  Thank you MS Answers, allowing the resolution of simple problems as frustrating and a lot of time as possible.

  If you answer these questions, someone (perhaps a useful MSE or FM) can see what the details of your system and what your video drivers installed and may direct you to a place better if the drivers must be updated.

  Try not to use your caps lock when responding.  Type uppercase is considered screaming and you don't need to be yelling again.

  Provide information on your system, the better you can:

  What is your system brand and model?

  What is your Version of XP and the Service Pack?

  Describe your current antivirus and software anti malware situation: McAfee, Symantec, Norton, Spybot, AVG, Avira!, MSE, Panda, Trend Micro, CA, Defender, ZoneAlarm, PC Tools, Comodo, etc..

  If the system works, what do you think might have changed since the last time it did not work properly?

  Now talk us a little about your hardware:

  Click Start, run and enter in the box:

  Msinfo32

  Click on OK and when the system info summary appears, click on Edition, select all, copy, and then paste the information here.

  For information about video drivers, expand components, click view, click on edit, select all, copy and then paste the information here.

  There will be some personal information (such as the user name and the name of the system), and anything that turns information private for you, simply delete the pasted information.

  This will minimize back Q & A and eliminate guesswork.

• Hi I need help I want to buy a graphics card for my acer aspire 5750g motherboard JE50_HR

  Hi I want to buy a better graphics card for my pc the motherboard is JE50_HR and I have the Nvidia GT 540 m 2 GB dedicated memory and I want to know a better compatible with this motherboard video card

  pls help

  Welcome aboard, Geo. You're not having any problem with your video card; you have a problem with your monitor. For the price paid, you have a quad-core laptop with a powerful video card, but something else had to go in order to keep the prices low (and Yes, savings have been forwarded to you).

  Notebook Review is a reputable on-line magazine site, and that's what they say:

• HP pavilion p6226it: can I upgrade my pc with a new graphics card?

  Hi, I have a hp pavilion p6226it, I would like to know if the graphc 7750 HD card would go well on my old pc.

  matherboard: M2N78-(Violet6)

  Processor: AMD Athlon II X 4 620

  RAM: 6 GB

  Graphics card: HD 4650

  Same expert people told me that I could have problems because of my matherboard and bios (I've never updated), is this true?

  @antonmartino,

  Hi again.  Just below the section for memory you'll find.  What you can do is take existing specifications and the specifications of the motherboard and see what card maximum that you can put in the slot.  The only thing you want to look at is what is the power required by the new map you found and if the power supply has enough power to stay with her horse.  If you talk to any place of the computer with the specifications of this page, that I gave you, they can give you the best option.  What I do is take the listed specifications of the card and match the cards, in that you are looking to put.  Check to see if it's the same dwelling and look to see if they require the same requirement for voltage and they should work perfectly.

  I hope this helps.

  Thanks again for the post and have a great day.

  HP Pavilion p6226it Desktop PC product specifications

• I can update my acer aspire 5742G ATI 5470 graphics card

  Can I update my laptop Graphic card

  News of the laptop:

  Acer Aspire 5742G
  Intel Core i3
  15.6 HD Led LCD
  ATI Mobility Radeon HD 5470 graphics card
  4GB Ram DDR3 memory
  HARD DRIVE 320 GB
  DVD-Super Multi DL drive
  Acer Nplify 802.11b/g/n
  6 - cell Li-battery

  Quote your version of Windows.

  Questions like this are best asked of the manufacturer of the laptop.  If the video card is integrated into the motherboard, you will probably not be able to replace it, but the manufacturer must have this information.

• Can not get the "modern" games to start on old PC because of the video (by the game company) card - can I install a "most recent" video card to solve the problem?

  I have an old Dell Dimension 2100 with Windows XP and Intel 82810 Graphics card.  Can I just update to a new graphics card or the speed or the RAM of the old machine will prevent play?  Speed: 1.1 GHz RAM: 284 MB

  Hi Baffledtempe,

  Welcome to the Microsoft Answers site!

  Just update the graphics card will not let you accomplish what you're trying. You will need to update the RAM as well. Games that exist on the market these days use less than 1 GB of RAM. If you spend just the graphics card, the game performance will not be good, it will be very slow and the resolution must be very low to make it compatible.

  Hope this information is useful.

  Amrita M

  Microsoft Answers Support Engineer
  Visit our Microsoft answers feedback Forum and let us know what you think.

• How can I delete messages from PC issues notifications if they disappear once the problem is resolved?

  In the icons hidden in the lower right side of the screen, I have an icon of PC problems. It tells me to insert a CD/DVD to finish a backup.  Backup files that I completed earlier where full and saved and done, but I can't get the message of the icon. There are a total of two questions showing there, but when I check my status of these two questions, what they are up to date and working correctly I just can't erase old notifications

  Hello

  • What version of Windows are you using?

  I would suggest you to Turn off the safety message and then turn on.

  Here is the link:

  http://TechNet.Microsoft.com/en-us/magazine/dd492018.aspx

• I can not install a previous version of Photoshop CC. Where is the problem?

  I upgraded Photoshop Photoshop CC CC 2015 and Creative Cloud App wants to buy it.

  I can not install a previous version of Photoshop CC. Photoshop does not appear in "previous wersions" cloud App Creation tab.

  Hi Andrzej,

  Please check the help below document:

  https://helpx.Adobe.com/manage-account-membership/CC-reverts-to-trial.html

  Please see the link below to return to the CC apps:

  http://blogs.Adobe.com/adobecare/2015/06/16/how-to-find-and-install-previous-version-of-ad obe-apps-in-cc-2015.

  Kind regards

  Sheena

• Can someone please help an elderly person in layman's terms how the problem of FLASH PLAYER? Thank you very much, elderly person, United States

  I keep seeing that the version of FLASH PLAYER is updated; However, I can't have the additional UPDATES.

  Can you help an older person THAN the LAYMAN TERMS in it please how to make it work in Firefox?
  Thank you very much
  MissM

  Hello MissM, if you want to download the latest version of adobe flash player - it is 16.0.0.305 at the moment - in order to correct security vulnerabilities that have been found in the plugin, you can do on this site:
  https://www.Adobe.com/products/flashplayer/distribution3.html

  Click on the link "Download EXE to install" next to "Windows / Browser Plugin-oriented" in order to download the installer...

• HP Pavilion 23-h024 AIO: can I put my HP Pavilion 23-h024 network card to support the 802.11ac?

  Our wifi at work is extremely slow and the technician who came told us that we have a router with capacities of 5 GHz. My boss wonders if our PC is supported by an upgrade on the network card before we spend the money to do this. Is there anyone can tell me which cards are compatible with our PC? Any information will be greatly appreciated.

  Upgrading a PC AIO is much more difficult than a normal desktop PC.

  The easiest way to update your AIO PC would be to upgrade with a wifi usb 802.11ac adapter.  Wifi installed mini PCIe wifi adapter uses the setting of 1 x 1 antenna built into your PC. Your PC is not able to be upgraded to a wifi with ability to stream adapter 2 x 2. You would need this ability to upgrade, but your PC has not.

  I have a collection of wifi usb adapters for my own use.  My favorite usb adapter is the ASUS USB-AC56.

  Note you will also need to upgrade the router to able to bradcasting your SSID to 2.4 and 5 Ghz with the 802.11ac specification.

  @helpmepickone

  I've updated some information in this post. See paragraph 2.

• Why if I right click on a file, there is no shipping on the menu? About 2 months ago it is a send to menu. now I can't send file. Do you have a way to fix the problem?

  About 2 months, I always use can send to menu. But, now I can't use it. Please help me. Im sorry because I'm not using English, I use Indonesian. And I'm only a junior high school student. Then maybe you don't understand what I'm saying. !

  Here is an article that will provide instructions on adding send to the Right click Context menu: http://www.vistax64.com/tutorials/148245-send-add-remove-context-menu.html.

  I hope this helps.

  Good luck!

  Lorien - MCSA/MCSE/network + / has + - if this post solves your problem, please click the 'Mark as answer' or 'Useful' button at the top of this message. Marking a post as answer, or relatively useful, you help others find the answer more quickly.

• How can I copy Photos from an Officejet 7500 a card inserted in the printer to the computer?

  I have a HP 7500 a all-in-one Officejet.  I have an SD card with photos on it is inserted into the slot of the printer.  I'm under 64-bit Windows.

  I can only view pictures and print on the printer.  It won't let me transfer photos from the printer to the computer.

  All other HP printers I had always let me use the SD card as a mass storage device and I could transfer files back using file manager in Windows.

  What I am doing wrong?

  Thanks for your help.

  Hello

  Yes, you can do so by mapping the SD card as a network storage device. Please follow the instructions below:

  http://support.HP.com/us-en/document/c00149194

  Kind regards.

• No pictures can be selected with DNG Converter to convert to DNG - what is the problem?

  Since my LR4 cannot import my new 7 d MKII RAW data, I have tried to convert the RAWs with DNG Converter whixh should be the best option. Unfortunately, after the opening DNG Converter does not show the RAWs in the folder that I could choose for the conversion, the file on the camera is as 'empty' folder on the computer where I transferred the RAWs for. What's wrong? I tried the DNG Converter 9.0 and 8.7, but the same effect with both versions... I use Windows 7 SP1, Intel i5, Nvidia GeForce GT 440 mCore, if this can help...

  You do not select the photos, you select the folder containing the pictures and the converter to act on the entire folder.

• Dual display (x 2)-l' one is PINK/PURPLE in color, how can I check for errors of video/graphics card?

  I'm trying to implement 2 screens (extended desktop mode) and when I connect them both, however, I got a picture on two screens, one of them is color purple/pink.

  I have swithced monitors around, it's NOT either of the monitors, they bot work very well... and the cablesARE guaranteed in the monitors and computer ports.

  What is the video/graphics card which is the problem?... If so, how can I check these errors?

  Thanks to all who respond!

  Try changing the cables, if they are of the same type.

  I think that the problem is a damaged cable.