Can Fax and Scan works when the computer is in standby?

Similar Questions

• When the computer remains in standby mode it will not start normally, usually ok in safe mode, but even when its up and running normally it's extremely slow.

  Original title: searchfilterhost problems

  I am running Vista family 32-bit and when the computer is left in standby mode, that it does not start normally, usually ok in mode without failure, but even if his place and it works normally is extremely slow. Having verified the use of the processor, 82 processes running anything meaningful except 50 + % is used by searchfilterhost.exe, this would cause the problem and if so how it can be cured.

  Hi Brian,.

  You have made any changes to your computer recently?

  I suggest you to follow the steps and check if it helps.

  Method 1: Follow the link and check if that helps.
  The problems of wake the computer from sleep mode

  Method 2: You can also follow the link and check if it helps.
  How to troubleshoot performance problems with sleep, hibernation and resume in Windows Vista

  Method 3: Search for viruses using the Microsoft Safety Scanner and check if that helps.
  http://www.Microsoft.com/security/scanner/en-us/default.aspx

  Note: The data files that are infected must be cleaned only by removing the file completely, which means that there is a risk of data loss.

  Method 4: You can also check out the link and check if it helps.

  Ways to improve your computer's performance

  How to make a computer faster: 6 ways to speed up your PC
   

• Windows fax and scan only saves the first page

  When I use the windows fax and scan pages to analyze. You can get an overview of all the multiple pages scanned, but what emailing or save you then cannot see the first page.

  Hello

  If you're using a scanner with a charger of documents and Windows Fax and Scan, you can scan multiple pages into a single file of scanning to the TIFF (.tif) file format. For more information, see:

  
  Scan a document or photo with Windows Fax and Scan
  http://Windows.Microsoft.com/en-us/Windows7/scan-a-document-or-photo-with-Windows-fax-and-scan 

  If you use Windows Fax and Scan and a flat bed scanner, you can scan multiple images to separate files probably. Not all scanners flat have this ability, so you may need to contact the manufacturer of the scanner to get a driver so that your scanner flat may offer this option.

  Reference:

  Scanning: Frequently asked questions
  http://Windows.Microsoft.com/en-us/Windows7/scanning-frequently-asked-questions 

  Kind regards
  Afzal Taher
  Microsoft technical support engineer

• Keyboard stops working when the computer is idle

  I have an ASUS desktop and windows 7.  When the computer is idle for a few minutes, the keyboard farm operation.  The mouse works fine.  Tried a new keyboard and no solution.  Tried a different USB port and the same thing.  If I restart my computer, it works fine until it is idle for a few minutes and then stops again.  Really frustrating.  any ideas?

  Original title: keyboard closed unexpectedly

  Hi Majohnson,

  Thanks for posting your query in Microsoft Community.

  I imagine the inconvenience that you are experiencing and will certainly help you in the right direction to solve the problem. However, I would be grateful if you could answer a few questions to refine the question in order to provide you with better assistance.

  1. This is not the exact model. your ASUS computer?
  2. The issue has started happening recently? If so, did you do the computer-specific changes before this problem?

  The question could arise is there some problem of corruption of pilot partners or a third party service interferes with the function of the normal keyboard. In order to diagnose and resolve the issue, I would suggest trying the following methods and check if the problem persists.

  Method 1:

  Try to start the system in safe mode and check if the number is reproduced. If this isn't the case, then clean the computer starts and check if that helps.

  Step 1:

  Safe mode is a diagnostic mode in which you are connected with only the minimal necessary services and active pilots. Check if the number is reproduced.

  Start your computer in safe mode

  Step 2:

  Place your system in the clean boot state helps determine if third-party applications or startup items are causing the problem. You must follow the steps in the article mentioned below to perform a clean boot.
  How to perform a clean boot in Windows

  Note: See "how to reset the computer to start normally after a boot minimum troubleshooting" to prepare the computer to start as usual after a repair.

  If the problem persists, try the following method.

  Method 2:

  If you have any security software installed on your computer, try to temporarily disable the security software and check if the key words work properly. Subsequent update of the security after a repair software.

  Disable the anti-virus software

  Warning: Antivirus software can help protect your computer against viruses and other security threats. In most cases, you should not disable your antivirus software. If you need to disable temporarily to install other software, you must reactivate as soon as you are finished. If you are connected to the Internet or a network, while your antivirus software is disabled, your computer is vulnerable to attacks.

  See method 3 for additional assistance on the issue.

  Method 3:

  Uninstall and reinstall the drivers USB controllers. Use Device Manager to uninstall and reinstall all USB controllers. This allows controllers to recover the port USB of his condition does not respond. USB controllers represent the USB ports in Device Manager.

  1. Open Manager devices by clicking the Start button, click Control Panel, click system and security, and then, under System, clicking Device Manager. If you are prompted for an administrator password or a confirmation, type the password or provide confirmation.
  2. In the list of the categories of equipment, locate and expand Bus USB controllers.
  3. Right-click every device under the Bus USB controllers node and then click Uninstall to remove them one at a time.
  4. Restart the computer and let the USB controllers get reinstalled.
  5. Plug in the keyboard and test to make sure that the problem is solved.

  For more information, please refer to:

  Updated a hardware driver that is not working properly

  Mouse, touchpad and keyboard with Windows problems

  Hope this information is useful. Let us know if you need more help, we will be happy to help you.

• WiFi no longer works when the computer was unplugged

  We just got wifi via the border about two weeks ago. Initial configuration must be done with an Ethernet cable, but our jack is not in the computer room, it's in the living room, so we had to move our entire computer in the living room to set up. Well, once it has set me up we unplugged the power cord and the computer still worked on the wireless connection. We did not want to leave in the room forever so we unplugged and he returned to the computer room. Now, he does not connect to internet at all and says that we need an Ethernet cable. I want to know why it worked before wireless, but when we moved he stopped and how to fix it. Any help please?

  RCC

  You must contact the wonderful support of border.  They know only the correct settings.

  However, it may be a driver.  One way to check is to go into the Device Manager
  (départ > recherche > le gestionnaire de périphériques), then check the network device to see if there is an Ethernet device and a wifi device listed)

• Sound comes from my speakers, even when the computer is in standby.

  All of a sudden, a broadcast said coming through my speakers. He periodically comes and stops and comes back a few minutes later. It seems to talk about the movie stars and what they are doing.  It lights when the computer is on the opening screen and when I'm on e-mail or internet.  WOW!  I hope someone can help.

  Please download the free version of Malwarebytes.
  Update immediately.
  Do a full scan of the system
  Let us know the results at the end.

  http://www.Malwarebytes.org/products

• How can I reinstall windows xp when the computer does not start and there is no cdrom/dvd drive?

  I have an Acer netbook aspire one.  It will not boot past the windows logo.  I have a windows xp disc to reinstall windows, but the computer has no CD or dvd rom.  Can I copy cd of windows xp on startup SD memory card and reinstall windows?  Or can I run connect the non working pc a working PC to access the cdrom on the work pc to reinstall windows?

  First of all, you are mistaken when you say that the PC does not start.

  This is clearly starting. The problem comes from Windows, not with the real PC. It's actually a very important distinction!

  There are methods to repair Windows, but they can be a bit tedious. By all means, follow the advice given here to do if you're so inclined.

  If you would not rather to repair Windows (and I think it's interesting a try) or your repair attempts are unsuccessful, apparently, you would need to use an external optical disc drive and follow the instructions here:

  http://Acer.custhelp.com/app/answers/detail/A_ID/2631

• I have blue screen error and auto se when the computer is turned off.

  My laptop has this problem of blue screen after sometimes and also when I turn it it will be auto even if I do not turn on the power button.

  After reboot and come to the desktop screen, it will display the following Microsoft error message

  • C:\DOCUME~1\Bongoh\LOCALS~1\Temp\WERc9da.dir00\Mini060610-02.dmp
  • C:\DOCUME~1\Bongoh\LOCALS~1\Temp\WERc9da.dir00\sysdata. XML

  I search the files and the directory WERc9da.dir00\sysdata.xml and WERc9da.dir00\Mini060610-02.dmp, but they may not exist in the system even if I set to reveal the hidden file.

  This after I upgraded the family windows XP Edition with service pack 2. When he was still using the previous service pack thing like that happens

  Now, what is the problem and how to solve it.

  If you have installed WinXP SP2, you could not possibly have had a functional antivirus installed. See...

  Cleaning a compromised system
       http://TechNet.Microsoft.com/en-us/library/cc700813.aspx

  Personal data backup (which none should be considered 100% reliable at this point) then format the HARD disk and do a clean install of Windows.  Please note that a repair installation (upgrade AKA on-site) won't fix this!

  HOW to do a clean install of Windows XP: see method 1 and http://michaelstevenstech.com/cleanxpinstall.html#steps in http://support.microsoft.com/kb/978307

  Once installed the clean, you will have the equivalent of a "new computer" in order to take care of everything on the next page before connecting the machine to the internet or one local network (i.e. other computers) otherwise and before using a flash drive or the SD card that is not brand new, or has not been freshly formatted:

  4 steps to help protect your new computer before going online
       http://www.Microsoft.com/security/pypc.aspx

  Other useful references include:

  HOW to get a computer that is running Windows XP Gold (no Service Pack) fully patched (after a clean install)
  http://groups.Google.com/group/Microsoft.public.windowsupdate/MSG/3f5afa8ed33e121c

  HOW TO get a computer that is running Windows XP SP1 (a) or SP2 fully patched (after a clean install)
  http://groups.Google.com/group/Microsoft.public.WindowsXP.General/MSG/a066ae41add7dd2b

  Tip: After getting the computer fully patched, download/install KB971029 manually:http://support.microsoft.com/kb/971029

  NB: No matter what Norton or McAfee free trial which is preinstalled on the computer when you bought will be reinstalled (but invalid) when Windows is reinstalled. You MUST uninstall the trial for free and download/run the removal tool before installing updates, Windows Service Packs, or updates IE and before installing your new anti-virus application (which will require WinXP SP3 must be installed).

  Norton Removal Tool
       FTP://ftp.Symantec.com/public/english_us_canada/removal_tools/Norton_Removal_Tool.exe

  McAfee Consumer product removal tool
       http://download.McAfee.com/Products/Licensed/cust_support_patches/MCPR.exe

  See also:

  Risks & benefits of P2P file sharing
  http://www.Microsoft.com/protect/data/downloadfileshare/filesharing.aspx
  http://blogs.technet.com/MMPC/archive/2008/10/06/the-cost-of-free-software.aspx

  Measures to help prevent spyware
  http://www.Microsoft.com/security/spyware/prevent.aspx

  Measures to help prevent computer worms
  http://www.Microsoft.com/security/worms/prevent.aspx

  Avoid fake security software!
  http://www.Microsoft.com/security/antivirus/rogue.aspx

  If you need help, please start a new thread in this forum:

  http://social.answers.Microsoft.com/forums/en-us/XPRepair/threads

  If these procedures look too complex - and there is no shame in admitting this isn't your cup of tea - take the machine to a local, good reputation and stand-alone computer (that is, not BigBoxStoreUSA or Geek Squad) repair facility.

  ~ Robear Dyer (PA Bear) ~ MS MVP (that is to say, mail, security, Windows & Update Services) since 2002 ~ WARNING: MS MVPs represent or work for Microsoft

• Windows does not work when the computer starts in mode 'sleep'

  The computer is easily adjustable in standby mode when I press on the eve of my keyboard key. However, when I want to start the computer again via push any key, the screen never shows anything (just fill black and nothing can be seen). Indicators power will return to the pilot and solid seems also lit, but just nothing display on screen. I have to push the power to shut down the computer completely to restart again.

  http://www.Vistax64.com/tutorials/63567-power-options-sleep-mode-problems.HTML?filter [11] = power % 20Management

  Read the info in the link above and in the "related links", including this one:

  http://www.Vistax64.com/tutorials/198047-power-plan-restore-default-settings.html

  See you soon.

  Mick Murphy - Microsoft partner

• Flash Player stops working when the computer is restarted. Why? It is always enabled.

  Why is Flash Player stops after restarting the computer to work? I have download Flash Player several times a day. Norton is the cause? When I re - download, I get a message that I have not sufficient user privileges, but it solves the problem, anyway!

  Unlocker is my go - to for fixing the files in this State.  It is probably easier to do it manually: Unlocker - free download and software reviews - CNET Download.com

  That said, the permissions being stripped on files is a symptom, not a cause.  You might get away with the lock and blowing these files and things will work normally after that.

  The point I want to drive home, it is that it would be smart to take advantage of the opportunity to save something essential.  You could just as easily be the first signs of catastrophic disk failure.  Having lost my share of data that has not been backed up, I always count these early warnings as gifts and take seriously at this point.  There are many good solutions free/good market online (especially if you don't have a lot of data that you really care), as well as traditional approaches to removable disk.

• Fax and scan - not in the Inbox

  Received faxes do not appear in the Inbox, even if they are in the right folder

  Hi anne_pwp,

  Follow these steps to grant permissions for the folder that could help you solve the issue.

  1. click on start and computer.
  2. click on organize, folder and Search Options, click the view tab, and then click Show hidden files and folders.
  3. navigate to %systemdrive%\ProgramData\Microsoft\Windows NT\MSFax\Inbox.
  4 right-click on the Inbox folder, select Properties, and then click the Security tab.
  5 make sure that the folder has permissions to write to the Network Service account and the administrator account.
  6. follow steps above to check if these faxes have the appropriate permissions.
  Check whether the problem is resolved.

  Please post back and let us know if it helped to solve your problem.

  Kind regards
  KarthiK TP

• Microsoft Narrator. How can I prevent it turning when the computer starts it please?

  I found and it started one day, now whenever I start my lappie, the Narrator begins. Anyone have any idea how to stop this please? :-)

  Try this: go to control panel > accessibility > Ease of Access Center > explore all settings > use the computer without a display > uncheck the box by tour Narrator > click Save...

  See you soon.

  Mick Murphy - Microsoft partner

• Vista desk top of page monitor screen remains black when the computer wakes mode standby

  Windows Vista Edition Home Premium

  Dell desktop

  Intel Q8200 @2.33 GHz processor

  6.00 GB RAM

  32-bit operating system

  Type of card ATI Radeon HD 3450

  Driver update has been installed without any problems.

  When my desk top comes out of fashion 'sleep' (using the mouse click), I hear my computer turns (beeps once and can hear the hard drive and fan), but can not get the screen on the monitor to display (rest is black). Can only crash the system to get everything back to normal. I searched in internet and microsoft forums but didn't find a solution. Please help, it seems that many others also have this problem without solution. I like to use "sleep" mode and do not want to resort to turning off the sleep mode option.

  Hello

  Please provide information for a better understanding of the issue.

  1. what was the recent change in hardware or software performed on the computer before the question?

  2. are you having the same problem when you Hibernate the computer?

  Check the display driver for power management problems.

  Method 1

  Check if allow this device to wake the computer is checked in the Device Manager.

  a. click Start, type Device Manager in the start search box and press ENTER.

  b. Select graphics cards, it will display your display driver, right click and select Properties.

  c. Select the power management tab.

  d. check the allow this device to wake the computer check box.

  e. repeat these steps for the network adapters and the mouse as well.

  If the problem is not solved then continue to.

  Method 2

  Remove both power on your computer and check to see if that fixes the problem.

  Reference:

  Change, create, or delete a power plan (scheme)

  Try to create another plan of the power of your computer and check if the problem persists.

  Power plans: frequently asked questions

  See also (additional links for more information),

  http://answers.Microsoft.com/en-us/Windows/Forum/windows_vista-system/blank-screen-after-Vista-went-on-sleep-mode/b5e5693a-28a6-4391-b9ac-36d345d6a3b9?msgId=a464f2ec-0651-4E2F-8CB0-f546b09b0989

  Hope this helps

• FAX AND SCAN WORK EXIT WINDOWS

  In my view, is an update. It was working fine. It shows available until I try to send then it shows not available. I go to services and restart, and then it disconnects a few seconds. Modem works fine and I can dial out on dialer.exe? Need a fix, I use it for my business.

  http://www.bleepingcomputer.com/tutorials/tutorial140.html

  Understand the Extras in Windows Vista and Windows Update info is at the link above.

   

  Remove the Vista updates; two ways to do this:

  1. a System Restore to before the updates:

  Click Start > programs > Accessories > system tools > System Restore > restore time/choose your own date > next

  If you use Norton, disable it before using the system restore.

  If it is impossible to enter the Normal Mode, do a Safe Mode system restore:

  Press F8 at the startup/power and the list of startup options, use THE ARROW key to select Safe mode > and then press ENTER.

  System restore steps according to the info above.

  Also:

  2. click on start > right click on computer > properties > Windows updates down the lower left corner > updates installed in the lower left corner in the next window

  > then click the one that you don't want > uninstall will appear at the top > uninstall it.

  ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~

  In addition, on the page where you clicked "Installed updates", click on change settings at the top left corner it

  > Change update settings in the next page of AutoUpdate to "check for updates but let me choose etc" > OK ".

  When you take a look at pending updates, you can either download/install them one at the time, namely the update causing you problems.

  > or if you do not need an individual > right-click on > UAC prompt > hide it

  See you soon.

  Mick Murphy - Microsoft partner

• Windows Fax and Scan cannot detect Photosmart C4580 all-in-1 scanner connected to the wireless network

  I have no problem printing or scanning when I connect my C4500 to PC via USB.  When connected via my home wireless router I can print OK but can not scan - it's the same for other users and computers.  Windows Fax and Scan gives me the message 'no scanner found. '  I need to work so that all users on my netwrok home can share the scanner.  I use Windows 7 64-bit.

  Thanks Travis_C (HP).  I actually found the solution just before receiving your answer!  I discovered that, although the Solution Center says it would uninstall the existing files before allowing me to reinstall with the latest version downloaded, it didn't remove all the files.  I only discovered this because the new facility has not taken me through the whole fresh installation procedure, he simply asked me what additional features I wanted to install and asked me if I wanted a local printer or network etc.

  I thought that there must be a mistake or problem with whatever existing files were left and the new facility would not correct it.  So I used the control panel to uninstall the existing files, and I made sure that everything was gone.  I then used the last download to reinstall, this time through the new correct installation procedure, and everything now works perfectly.

  With this method I always had a problem on another PC, giving me the same problem I had before.  I realized that this was due to a USB dongle connected to the PC to a wireless keyboard that seems to affect the installation.  When I removed the dongle installation worked again perfectly, and I now have full printing and scanning ability on all PCs.

  I think the installer for this printer wireless (and perhaps others?) should be updated to solve the problem, and also the center of Solution must be fixed to ensure that if you uninstall the software it should not leave anything.