can get web address, but it will not Sara t log into it, at the bottom of page fault symbol rises

When trying to connect in my chess club of the page but login box does not work, at the bottom of the screen, it is said that he has to wait for the response & error symbol appears for this page

Hello

·         What operating system is installed on your computer?

·         What browser do you use?

·         You did changes to the computer before the show?

·         The problem happens only with the mentioned Web site or all sites?

I suggest you follow the link that speaks of Web sites may not behave as expected in Internet Explorer and check if this solves the problem of: below

http://support.Microsoft.com/kb/956197

Tags: Windows

Similar Questions

  • I need to change the drive to a new drive letter, but XP will not let me because he thinks that the letter is in use.

    Quick question: I need to change the drive to a new drive letter, but XP will not let me because he thinks that the letter is in use, when it is not.

    The question for a long time: I've updated two disks in my computer from 1 TB to 2 TB. They were e and K:. The KC: drive is used as a backup of data on E: drive.

    I copied all the data on the old drive E: to the new, but when I put the new drive in place of the old, XP wouldn't let me assign the E: drive letter. It is ironic that several times, I see the warning that if you change a drive letter, some programs may not work - so of course that Microsoft is aware of this problem - however, it is annoying when you NEED to change a drive letter to OPERATE programs, but Windows won't let you. Sometimes, trying to protect users from doing stupid things prevents them from making things work...

    Anyway, after some research, I discovered that if I put the drive E: OLD and "remove" the drive of her letter, then the letter E: becomes available again. It did not work, and my computer is now partially satisfied with his new E: drive. However, the same trick with the new drive K: does NOT work.

    I removed the letter 'k': the old K: drive, but when I install a new one, it won't let me change it. It happens to be stuck at 'l': it's no use to me because backup programs are ready to use the K:\ path.

    There is that no "K:" drive in my computer and I deleted the letter k: the old disk. How do I FORCE XP to designate the new drive K: so that my backup program can work again?

    Thank you.

    Did you try to start your computer in Mode without fail (repeatedly, key to tap the F8 as your computer starts) and then try to re-assignment of drive letters?
    I think that some programs on your machine may be playing with your drive letters.  Boot safe mode will allow Windows to operate with a minimum of processes that are running and you should be able to change drive letters in these conditions.

    HTH,
    JW

  • I have a Mac and added the DNP DS80 printer but it will not let me print. He said "the paper size selected is not compatible with installed support." Anyone have this problem?

    I have a Mac and added the DNP DS80 printer but it will not let me print. He said "the size selected is not compatible with the installed support." All the answers for this?

    Refer to the discussion: Lightroom v4, v5, v6 Will not print to a DS40 printer

    Kind regards

    Mohit

  • My office gets 169 IP address and it will not repair or renew; no connectivity to the internet

    My office is 169 IP address and it will not repair or renew; no internet connectivity; have tried all the usual including contact my ISP. They suggested that I contact you

    Hello

    Maybe this can help, http://www.ezlan.net/debug.html

    Jack-MVP Windows Networking. WWW.EZLAN.NET

  • I added a new email address, but Thunderbird will not download new e-mail messages inside

    My wife and I have two accounts with the same email provider. E-mail from the mail server are downloaded correctly in Thunderbird. We have recently added a third account, but Thunderbird does not find or download emails on this account. All parameters are identical for all three accounts. That is what it is?

    You have given no details or the indication of the error messages. Nobody is going to begin to guess what might be your problem.

    A good start would be to post your Thunderbird troubleshooting info, so people could have a starting point.

    From the Help menu select troubleshooting information.
    Make sure to disable the mailbox account names include so no personal data is displayed.
    Now, click on copy text to the Clipboard.
    Come back here and paste this info into a response window.

  • You try to upload my Web site, but it does not recognize the FTP server, have I missed a step

    I am trying to download my website of the "Upload to the FTP host' in the Menu files.

    I enter the domain name, user name and my password for my host.  It says FTP server not found.

    If I change the FTP server to the IP address, my ISP gave me that I can go a little further, but I get the following message.

    "Unable to validate the specified domain that is associated with the FTP server and folder.  Go ahead in any case or not. »

    If I hit Yes it downloads the file to my Web host, but it will not publish the Web site

    I missed a step somewhere along the way to get it going.

    Thank you

    Angela

    Hello Hollyford,

    Please see the following link, they might be useful.

    http://helpx.Adobe.com/Muse/using/uploading-site-third-party-hosting.html

    For video

    http://TV.Adobe.com/watch/learn-Adobe-Muse-CC/using-FTP-with-Muse/

    Kind regards

    Nitin Kapila

  • Windows Installer keeps trying to install msi.status but it will not install

    Windows Installer keeps trying to install msi.status but it will not install and I think he got the other updates to the installation.  How difficult or get rid of it?

    Hello
    In my view, that it is a software HP printer problem. Please, try the following:

    If you have the HP software on your PC support (printers, etc.)
    the disc when the pop-up window displays a location '1'. Click Browse
    then open the HP disc in the CD drive. A named icon status should
    appear. Click on this icon and load. This will get rid of the
    Status.msi loop.

    If you do not have the original disc. Uninstall HP Photosmart all-in-One Driver software and HP update program - then only reinstall the HP Photosmart all-in-One Driver software. Do not update, just live with it. The web link for the full features of the software download is provided below.

    http://h10025.www1.HP.com/ewfrf/wc/s...duct=320478 5

    I hope this helps Mark <> Microsoft Partner

  • Hello.. I bought photoshop cc, but it will not be installed. So I want to know how I can get solution.

    Hello.. I bought photoshop cc, but it will not be installed. So I want to know how I can get solution.

    He came like that.

  • Update trial version, but got and even that will not open because my email associated with the account configuration has changed, so I can't get into it at all. Adobe said that I can't change my email that I have to close my account and start a new. any w

    Update trial version, but got and even that will not open because my email associated with the account configuration has changed, so I can't get into it at all. Adobe said that I can't change my email that I have to close my account and start a new. any way around this? sounds to me ridiculous

    Contacted Adobe Support and they recommended to configure the new Adobe ID?

  • I want to save an IMAP via POP3 account in Thunderbird, but it will not download old emails that are still on the server. How can I do this?

    I start using Thunderbird to save and purge old e-mails from an account via POP3. This account is accessible by other users using IMAP on their computers and mobile phones.

    I want to archive and purge old messages from the server using Thunderbird. But it will not download messages that apparently are marked as read on the server via IMAP.

    POP mail accounts must be configured to "leave messages on server".
    Check this box before use.

    • Tools > account settings > server for the e-mail account settings

    or

    • menu icon > Options > account settings > server for the e-mail account settings

    Select: 'leave messages on the server.

    Optional: select: "during the more than xx days" this will remove something more that select the specified number of days "until I have delete" when you delete an email it will be deleted from the server.

    Click Ok to save the settings.

    POP mail accounts are only looking at the Inbox and download everything that has not been previously downloaded regardless of whether it has been read or not. They cannot access or download from any other folder on the server.

    If you want to download the e-mail messages in other directories, you must move the emails in the Inbox to upload and it's may not be practical in your situation.

    What you can do is to synchronize your IMAP folders to a copy downloaded to your IMAP e-mail account.
    Then switch mode 'offline' to stop any additional synchronization synchronized files update.
    MozBackup tool could now be used to save the profile synchronization created mbox files that contain emails.

    You can also do the following to get a copy outside the IMAP e-mail account:
    Create the same folders in the "local folders".
    Then right click on the email and "copy to" and select local folders and the folder you need.
    Put a copy in the local files means these e-mails are also on your computer and they are not influenced by what you do in the IMAP folder.
    You need backup emails in these folders.
    See info:

    MozBackup:

    ImportExporttool:

  • Trial version of Streets &amp; Trips, but it will not install. I get an error message indicating that Microsoft Visual C++ 2010 Redistributable must be installed

    original title: trial version of Streets and Trips
    I downloaded streets and trips 2011 version of track, but it will not install.  I get an error message indicating that Microsoft Visual C++ 2010 Redistributable must be installed.  It has been installed and then I get another error message saying "one of the prerequisite components failed to install. Implemented now will end "what can I do to start the installation of Streets and Trips?

    Hello

    Which edition of Windows are you using?

    Example of Windows 7 ultimate 64-bit.

    Please follow the steps mentioned below to help solve the problem.

    Method 1

    a. perform a clean boot

    How to troubleshoot a problem by performing a clean boot in Windows Vista or in Windows 7

    http://support.Microsoft.com/kb/929135

    Note: follow step 7 to put the computers start to Normal upward departure mode once you have completed all troubleshooting.

    The article above applies to Windows Vista and Windows 7.

    b. now, try to install the game and check if it helps.

    If the problem persists then please continue to,.

    Method 2

    Error message when you install a Microsoft game or a mapping program

    http://support.Microsoft.com/kb/258496

    Method 3

    You receive an error message on the required components, Error 1316 or error 1722 when you try to install Streets and Trips

    http://support.Microsoft.com/kb/254435

    The article above applies to the versions of Streets & trips

    You can also post your request in the forum Street and the TRIPS Agreement.

     

    Hope this information helps.

  • I just bought a Windows 7 Edition upgrade Home Premium to professional, but it will not install and told me to get a dfferent key.

    I just bought a Windows 7 Edition upgrade Home Premium to professional, but it will not install and told me to get a dfferent key.

    Windows 7 Anytime Upgrade fails:

    If your getting the following: error: Windows Anytime Upgrade failed
    This problem may occur if Windows 7 SP1 was downloaded by Windows Update, but has not yet been installed.
    See: http://support.microsoft.com/kb/2660811

    = Other reasons and possible corrections.

    Windows Anytime Upgrade fails with the error:
    "every time that the upgrade has failed. Go online to solve the problem.
    http://support.Microsoft.com/kb/2658652

    If Anytime Upgrade still does not work:

    Shut down and restart your computer.

    Make sure that the Windows updates have been installed.

    Download the hotfix that contains a tool called CheckSUR, this tool will look at the package and the maintenance of records and difficulty any data corrupted, the tool is listed under kb947821 he can be found at the following link http://support.microsoft.com/?kbid=947821

    If Anytime Upgrade still does not work, turn off the user account control:

    1. go in user accounts in Control Panel

    2 change user account control settings

    3. pull the slider to the level as low as possible

    4. restart the PC

    5. pass by the "Anytime Upgrade" as usual

    Try the following:

    1 disable any security software before attempting to upgrade

    2. make sure that your computer is updated (devices and applications)

    3. disconnect all external devices before installing.

    4. check your hard disk for errors:

    Click Start

    Type: CMD, according to the results, right-click CMD

    Click on "Run as Administrator"

    At the command prompt, type: chkdsk /f /r

    When you restart your system, your computer will be scanned for errors and will try to correct them.

    1. click on start, type msconfig in the search box and press ENTER.

    User account control permission

    If you are prompted for an administrator password or a confirmation, type the password, or click on continue.

    2. in the general tab, click Selective startup.

    3. under Selective startup, clear the check box load startup items.

    4. click on the Services tab, select the hide all Microsoft Services check box, and then click Disable all.

    5. click on OK.

    6. When you are prompted, click on restart.

    7. after the computer starts, check if the problem is resolved.

    Also run the Windows 7 Upgrade Advisor:

    http://www.Microsoft.com/Windows/Windows-7/Upgrade-Advisor.aspx

    Who should I contact if I have problems installing and / or activation of my product key card?

    Please contact to the: www.windows7.com/getkeysupport.

    If all above fails them, install Windows 7 Service Pack 1, and then try the Express Upgrade:

    Learn how to install Windows 7 Service Pack 1 (SP1)
    http://Windows.Microsoft.com/en-us/Windows7/learn-how-to-install-Windows-7-Service-Pack-1-SP1

    If your key is not valid and you will need to change the keys, you may need to Open regedit and remove first the ProductKey value in the following registry key:
     
    HKCU\Software\Microsoft\Windows\CurrentVersion\WindowsAnytimeUpgrade

  • My old computer died, I used my Adobe disks for installing Adobe PRO 7, but activation will not work. How can I activate?

    My old computer died, I used my Adobe disks for installing Adobe PRO 7, but activation will not work. How can I activate?

    Hi edharaway,

    Please visit this link: Get the Code of Activation for Adobe Acrobat 7.0 Pro

    Thank you!

    Shivam

  • I realized that I had a message to update for a while then when I checked, I found that the app CC was missing. I downloaded and installed the application, but it will not update of software. In the creative cloud Panel, the only options I get are the Hom

    I realized that I had a message to update for a while then when I checked, I found that the app CC was missing. I downloaded and installed the application, but it will not update of software. In the creative cloud Panel, the only options I get are the Home tab to check the activity and the Stock tab. The applications tab is missing. How can I get that back so I can update photoshop and lightroom?

    Please, try the steps mentioned here https://helpx.adobe.com/creative-cloud/kb/apps-panel-reflect-creative-cloud.html

    Let me know if it works!

  • My computer is Windows Vista and I pay for Photo Shop CS6, but it will not download. Can I download the CS5 and how?

    My computer is Windows Vista and I pay for Photo Shop CS6, but it will not download. Can I download the CS5 and how?

    Photoshop cs5 is designed to:

    Windows XP with SP3

    Windows Vista Home Premium, Business, Ultimate or enterprise with SP 1 (P2 S recommended)

    Windows 7

    Photoshop cs6 is designed to:

    Processor Intel Pentium 4 or AMD Athlon 64

    Windows XP with SP3 or Windows 7 with SP1

    CS6 applications support also Windows 8 and Windows 8.1.

    * Video features are not supported on 32-bit Windows systems.

    * 3D features are disabled and some features of mercury from the improved graphics engine may not work with less than 512 MB of VRAM. Read the Help section.

    If you just buy CS6, you might be able to get a refund, but Adobe sells more software CS5. Is it possible to upgrade your computer to make it compatible? Here are the system requirements for photoshop:

    System requirements | Photoshop

    Guinot

Maybe you are looking for

  • How to find the 'search' tab

    the Search tab appears, but I can't access it... just try to google search engine

  • SD 2 GB card is not readable on the Satellite 2450-201

    I have a satellite 2450-201 with a slot for sd card, when I insert a kingston 2 GB sd card it read doesn´t.What could do?The sd card Don t have a problem.I think that something the perhaps pilots is an upgrade, but I can´t find it anywhere. Post edit

  • How to disable verification of fingerprints at startup?

    The previous connection set to the user on a fingerprint, you forgot the password. I managed to enter accordingly after the lengthy operation myself, as long as the administrator to set the password, to set an entry as well according to the password

  • Microsoft Virtual WiFi Miniport adapt

    Microsoft Virtual WiFi Miniport Adapter I try to update the driver in Device Manager, but get a message in a box of RED that the certificate is not signed and that it might be a malicous software and dangerous to install it. the current driver is dat

  • BlackBerry Q10 Password Keeper importing data from my iMac

    I see that the password keeper is now installed with the new update of Q10.  All my passwords are stored on my PC or iMac.  It would be a daunting task to add them all manually. How to import these password in the Q10?  Guardian doesn't have the abil