Can Hyperion - I use Windows Server 2008

Similar Questions

• Windows server 2008 standard key can be applied on windows server 2008 R2 standard assessment installation?

  Windows server 2008 standard key can be applied on windows server 2008 R2 standard assessment installation?

  Thank you
  Tony

  Original title: windows server 2008 key

  Hello

  Support for Windows Server is not provided in these forums. On the other hand, it please repost your question in the relevant Microsoft TechNet forum here:

  http://social.technet.microsoft.com/Forums/en-us/category/windowsserver .

  Thank you.

• Three companies using Windows Server 2008 Active Directory and physical locations?

  The research of three companies using Active Directory in Windows Server 2008 and also how many physical locations?

  Answers forum is addressing issues technical home user.

  If you don't have a technical question, you can try to use Bing to search for the information you are looking for.

  If you are having problems with Active Directory, you can create a new post on the TechNet forums for assistance.
  http://social.technet.Microsoft.com/forums/en/category/WindowsServer/

• Problems to use Windows Server 2008 R2 64-bit on ESX 3.5 U3

  I am having some problems with Windows Server 2008 R2.

  I was charged with the creation of 2 new Windows Server 2008 R2 servers. We have ESX 3.5 Update3. I found that in my attempts to put an address static IP in the virtual machine, the system crashes. If I leave the adapter to DHCP, it seems to work longer, but this obviously doesn't work. Just to be in the IP menu type in IP (do not hit OK or apply again) will cause the console screen lock.

  I found that since the release of ESX 3.5 U4 notes:

  x 64 versions of Windows Vista and Windows Server 2008 operating systems require Microsoft hotfix

  x 64 versions of Windows Vista and Windows Server 2008 without Microsoft hotfix http://support.microsoft.com/kb/950772 operating systems have a situation where the guest operating system is not responding and returns the following error:

  MONITOR of PANIC: vcpu-3: SAY vmcore/vmm/cpu/segment.c:430

  I was not able to find the error code in my ESX systems, so I can't confirm that I see the same question. I moved the virtual machine of 4 different hosts in the same cluster with the same results.

  Here are the best true - I built the virtual machine from scratch and configured 2 GB RAM, 1vCPU and 40 GB slim HDD put into service. With no OS, I cloned this config for the 2nd of 2 servers that I need to install. I traced the two VM 2008 R2 ISO we have on our Image data store. Both installed at the same time. Given their Unique IP and Machine names and joined them in the field. Once that ended, I migrated my cluster Corp Server2 to my cluster off site for DR purposes. The only change in config is the VLAN on the remote cluster.

  The two systems worked very well. As I returned to server 1 to start install application - lock. Reboot, login and lock. This is where I started to move the virtual machine to other hosts of the local cluster. I have found no point in troubleshooting, I'll just clone server 2. I deleted the name of the Server1 computer. Off of Server2, cloned it more to the local cluster. I then started without the NIC on so I could change the name of the computer, IP and add to the domain. This seemed to go well, I have been brought back online and start installing the application. Until I'm at the point of launch the installer app - lock.

  2 on the remote cluster server works smoothly. I have validated the ESX host on all host versions to make sure I was in the same field of play on both sides - check. No other Server 2008 seems to have this problem.

  I will delete and rebuild 1 server from scratch, but I don't see how I can do a clean install of ISO any different for the same hardware and best results.

  I checked the link to the fix for MS, but article reference Server 2003...

  Is there something that I am on?

  Addendum:-I find it strange that although I have 2008 R2 installed, the drop down menu to comments what OS in VM config allows only to 2008 (64-bit) for the selection nearest you. If you look at the field Server guest operating system in a nutshell, it says that NT 4.0 is installed. Is this just a problem of display text with this version, or a cause for concern? I found everything all the R2 are displayed as NT4 in the Summary tab.

  Corrections - it seems Server2 locks as well at the opening of the Server Manager window - I can see the "collection of data...» "downstairs. I had also opened the work center & gt; Properties window on top of the Server Manager window. VM has ceased.

  Addendum - I found that R2 the boot safe mode with networking to adjust the TCP/IP offload to disabled results in a locked VM when in network properties.

  2008 R2 is not on the official list of guests supported, and others have reported problems with it as well.

  -KjB

  VMware vExpert

  Don't forget to leave some points for messages useful/correct.

• Unable to validate a way out of trust on either of the two domains using Windows Server 2008 R2

  I have two domain controllers in the two different forests.  Both have a Stub dns setup for each other and can ping both the field and the name of dc for eachother.  Domain1 build outgoing approval and validate successfully.  Domain2 see confidence applied, however any attempt to validate this trust or build from the Wizard ends with only 2 domain cannot locate the domain controller for Domain1.  What can be done to allow Domain2 validate this trust?

  Hello

  Microsoft has specific Forums to help you with your Server 2008 R2 questions.

  Could you please repost this link in Server 2008 R2 Forums.

  "Support for Windows Server 2008 R2"

  http://TechNet.Microsoft.com/en-us/WindowsServer/bb512923

  See you soon.

• Is it better to use Windows Server 2008 with or without Hyper-V?

  There are two "families" of Windows Server 2008: with and without Hyper-V.

  I need to install a new Windows Server 2008 (x 64) in a new server machine.  So I was wondering that I should choose.  With or without Hyper-V?  Because in the future, I might want to install VMWare Server 2.  If there is Hyper-V, would there be a conflict?

  Use that WITH Hyper-V. Hyper-V is a role that you add after the installation. If you install one without, so you'll never have the ability to use Hyper-V on this machine, if you need. Please keep in mind that you cannot run virtual Hyper-V and VMware Server computers on the same host at the same time, as the previous poster said - you will see a pretty blue screen if you try

  Dimitri Rodis

  Integrita Systems LLC

  http://www.integritasystems.com

• Using Windows Server 2008 with After Effects as render slave?

  Hi guys,.

  We have a good number of servers running Windows Server 2008 64 bit.  We also wanted to use these boxes and wanted to know if it is possible to use them as slaves with After Effects rendering?  Anyone doing this?  We found nothing to a Windows Server 2008 system configuration.

  Thanks for everyone entered.

  Jason

  Here are the system requirements:

  http://www.Adobe.com/products/AfterEffects/systemreqs/

  "Microsoft Windows Vista Home Premium, Business, Ultimate, or enterprise with Service Pack 1 or Windows 7"

  Windows Server 2008 is not on this list.

• Need help with the design of a professional network and implement using Windows Server 2008.

  original title: CNS Capstone Project

  Network design and implementation. The project includes an important process of CCES in life cycle of the product as the collection of data and analysis, needs assessment, planning

  design, test strategy, documentation, etc. in fact build a network simulated by using existing equipment.

  The name of the firm co..   wide are network will connect all the sites with regional hubs. WAN will rely on a two-layer hierarchical model. locations

  LAX, DCA EGKK AND ZSPD all REGIONS will BE connect to san diego headquarters, composed of many disprate TCP/IP servers will be the only ro0uters of network protocols

  installed at each location basic WAN. Each building standardimplentaion active directory windows 2008 I re-branded, PROJECT MANAGEMENT how is that, I have a lot of project management books, but I need a Visual, I have a moment hard to read I'm more show me I learn hands on I went back to school and I am new to this can you help me graduating in March if I pass this capstone project.

  Hello

  The question you have posted is related to professional level support. Please visit the link below to find a community that will support what ask you:

  http://social.technet.Microsoft.com/forums/en-us/category/WindowsServer

• Can I use license 2008 Windows Server 2008 R2?

  I have Windows Server 2008 Standard license, can I use it in Windows Server 2008 R2 Standard Edition?

  and it's my Windows 2008 CAL would be valid if using windows server 2008 R2?

  Hello

  Post your question in the TechNet Server Forums, as your question kindly is beyond the scope of these Forums.

  http://social.technet.Microsoft.com/forums/WindowsServer/en-us/home?category=WindowsServer

  See you soon.

• change an active partition in windows server 2008 r2 makes me can't open a windows session and be invited to the compaq recovery system

  Dear all,

  I struggled with this problem for 3 days. I can't connect to windows server 2008 R2 because I accidentally change the active partition of the system partition to another partition whose size is very small (only about 1 GB). When I try to watch through the back, the sequence is all wrong. The previous system partition was becode D c. The other partition which is becoming C f.

  I tried to use startrep to fix this, but the problem remains the same.

  I also try to use bcdedit /? bootsequence, but because I don't know how to see the partition guid, I can't change the bootsequence.

  Can anyone help to open a windows session? Your help is appreciated production. I need it as soon as possible...

  Concerning

  Henry

  Dear all,

  I struggled with this problem for 3 days. I can't connect to windows server 2008 R2 because I accidentally change the active partition of the system partition to another partition whose size is very small (only about 1 GB). When I try to watch through the back, the sequence is all wrong. The previous system partition was becode D c. The other partition which is becoming C f.

  I tried to use startrep to fix this, but the problem remains the same.

  I also try to use bcdedit /? bootsequence, but because I don't know how to see the partition guid, I can't change the bootsequence.

  Can anyone help to open a windows session? Your help is appreciated production. I need it as soon as possible...

  Concerning

  Henry

  Hey henry cs

  These forums are for help on problems with vista

  I suggest that, for the best help repost you in the forums windows server 2008 below

  http://www.Microsoft.com/windowsserver2008/en/us/forums-blogs.aspx

  Walter, the time zone traveller

• Impossible to use Ctrl + Alt + Delete key combination on the Windows Server 2008 operating system

  When you use Windows Server 2008, it does not recognize the function "CTL + ALT + DEL" to open a session; It works very well with Windows 2003 and Linux, but not with Windows 2008. It is connected to OmniView SMB F1DP108A using F1DP101

  Hello

  Your question of Windows is more complex than what is generally answered in the Microsoft Answers forums. It is better suited for the HE public Pro on TechNet. Please post your request in the Forum of networking Windows 2008. It is a forum dedicated to solve problems. Please see the link below.

  Windows IT Pro Forum 2008: http://social.technet.microsoft.com/Forums/en-US/windowsserver2008r2networking/threads

  Kind regards.

• LAN driver for Satellite L505 - 10Z PSLS3E on Windows Server 2008

  Hello world

  We hope to find a solution for my case.

  I have Toshiba Notebook (PSLS3E-L505-10Z) and installed Windows server 2008 on it, but I can't find the driver Lan for this OS. Could guide you please solve me this problem, because I lost a lot of time to research on the toshiba Web site and with no valid result realtek Web site.

  Thank you

  Hello

  Windows Server 2008 is based on a Vista/Win 7 OS.
  It s like the same situation 5 years ago. Win 2003 server was based on Win XP and all the drivers Win XP are compatible with Win 2003 server.

  If you are using Windows Server 2008, then you should try the Vista/Win 7 drivers!

  Good bye

• Windows Fax and Scan "Sender Name" empty (Windows Server 2008 Standard)

  Hi all

  I am using Windows Server 2008 Standard (32-bit) with a RocketModem III card.  I have the latest drivers for the RocketModem.

  Using Windows Fax and Scan, I can send and receive faxes fine.  The only problem is when I see the fax, the name of the sender is blank.  I am trying to display the telephone number that someone sends me the fax to.

  I had thought it might also be under CSID, but everything I have complete options because it puts there.  I guess that means I want the CSID show for all those who sent faxes to me.

  It might be worth noting that I have active CallerID and you have a real fax machine that shows the incoming number very well.

  Does anyone have an idea where I could go wrong here?  Thanks in advance for the help!

  This issue is beyond the scope of this site and must be placed on Technet or MSDN

  http://social.technet.Microsoft.com/forums/en-us/home

  http://social.msdn.Microsoft.com/forums/en-us/home

• Difficult communication between Windows Server 2008 R2 and Windows Server 2008 R2

  I have a client-server application. The application server is installed (Jboss 4.2) on a computer that uses Windows 2003. The Jboss does not have Local system, but a user who has administrator rights. Among other features, this application communicates with other servers that use Windows Server 2008 R2, to find all the services of Jboss that are installed on these machines, their status, the databases that are connected to them, the ports (by checking the file jboss - service.xml, oracle - ds.xml). This communication is done by sending orders sc, as (and other controls to start and stop services):

  Status of request \\server SC = all | find/i 'jboss ' | find/i 'service_name ' | find/i "_q".

  My problem is that I have to migrate this application from Windows 2003 to Windows 2008 R2.  After I installed it on my new machine, I saw that the application is not behavies as it should. I managed to observe that the response time to send the same command (the one above) to Windows 2008 R2 to Windows 2008 R2 takes more time that sending the same command from Windows 2003 to Windows 2008 R2.

  Is something changed in the sc command or there's a problem with the security rights?

  If you have an idea, please give me a feedback.  This problem is beyond my knowledge.

  You can find server gurus in the following forums:

  http://social.technet.Microsoft.com/forums/en-us/category/WindowsServer

  This forum deals with domestic users of questions, so using Server forums you will get a much better response.

• Scheduled task does not run on Windows Server 2008 r2

  Hi all

  Hope it's right,

  Sir I am using windows server 2008 r2.

  in what I use schedule a task to run a windows application that needs to run in 04:00 every morning.
  but this time he's not running as a last result, I get this error 0xE0434F4D code

  why I get this error?

  How to run this application?

  Thank you

  Hello VickyUM,
   
  The question you posted would be better suited in the TechNet Forums. I would recommend posting your query in the TechNet Forums. You can follow the link to your question:
  http://social.technet.Microsoft.com/forums/en-us/category/WindowsServer
   
  Hope this information helps.
   
  Good day!