Can I activate the AHCI on my CQ50-215nr mode?

I want to improve my Compaq CQ50-215NR with an ssd when I install windows 7, bios is not all options for the sata settings and I would like to know if there is another way to activate the AHCI before I have buy an ssd.

Hello

Even if the option is not available in the Bios menu, AHCI is already enabled in Bios of HP.

Kind regards

DP - K

Tags: Notebooks

Similar Questions

  • How can I activate the AHCI on a Studio 540?

    Hello I recently upgraded my pc to an OCZ Vertex 3 240 GB ssd hard drive and moved my old HDD as a secondary for the storage of music, pictures and video files. I read that using the SSD in AHCI mode will further improve the performance of the disk. My question is how can I activate the AHCI in bios dell. the only im options given are SATA and RAID. Is it possible to run AHCI? Any help is appreciated. I have better than average knowledge with pc, s but far from an expert. Thank you

    Care Syatem

    Core 2 quad 8200 processor 2.3 ghz

    8 GB DDR2

    PNY geforce 560ti

    Agility 3 OCZ 240 GB primary

    WD caviar black 640 GB secondary

    Corsair 600w ch

    Windows 7 64 bit

    If your bios allows, you can find passage to the raid (even if you have only a single boot drive) can put you in ahci mode. Before making the change in the bios, you will have to do some registry tweaks like just change the bios setting you will get a bsod when you start.

    To enable switching between RAID/AHCI/IDE mode, you will need to change the values 'Start' in these key 0

    HKEY_LOCAL_MACHINE\System\CurrentControlSet\Services\Msahci\Start

    HKEY_LOCAL_MACHINE\System\CurrentControlSet\Services\Pciide\Start

    HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\services\iaStorV\Start

    Once you make these changes, restart and set AHCI/raid in BIOS, save the changes and then restart.

  • HP Envy 1540T H8: How can I activate the AHCI?

    I installed a new Pro 850 Samsung 1 TB SSD drive which replaced a Samsung 256 GB SSD.  However, I am unable to get the computer to start with I select AHCI mode in the BIOS of the reader.   I can only boot into RAID mode and magician then tells me to activate the AHCI for optimal performance.

    The following system information is provided:

    OS: Windows 8.1 64bits

    Chipset: Intel (R) C600/X 79 series chipset controller LPC - 1 41

    Storage controllers: Intel (r) Desktop/Workstation/Server Express Chipset SATA RAID Controller 12.8.2.1000

    RAM: 32 GB

    Does anyone have any suggestions on how to proceed?  Thanks in advance for your help.

    Mr President.

    Thank you very much!.  I tried to solve this problem for days.  I had already installed a new copy of Windows 8.1, so I've been worreid I need to start over, but I do not have.  All I had to do was follow you to start in safe mode.   I then rebooted in UEFI, changed the RAID on AHCI and disabled Secure Boot.  The system then finished the re-boot and is in AHCI mode.  I have not lost all data on my three internal drives (1 SSD and 2 hard drives).  For some reason, he did reformat a NAS attached, but I don't have something out there that was not saved.

    I really apprecitae your help!

    All the best,

    John

  • How can I activate the remote computer to power saving Mode monitor?

    I am a technician in a small private company and it is my duty to keep all desktop computers works very well.
    Desktop computers:

    • are the Dell Optiplex GX260
    • Run Windows XP SP3
    • have Dell 17 "monitors
    • with Intel Pentium 4 (2.4 Ghz) processor with 1 GB RAM

    I do my job after working hours. I connect to them with my laptop (running Windows 7) and check their conditions, one by one. Now, my employer comes to know that when I do this whole process monitors for desktop computers continue to run. As it is not put in place a very large company and electricity and the price of fuel in Pakistan are very high. So, he asked me to find a way to turn the monitors to the power saving mode, when I do my work. In this way, it will be significant energy savings and fund savings in monthly bills. So, can someone please tell me How do I turn on monitor of the remote computer to the power saving mode?

    There are several ways to handle this.

    #1-have affected the power turn on their monitors, but let run PC
    #2-click Start > Control Panel > Power Options and choose how long it is before the screen turns off. Once your activity on their machine is complete, then will kick time.
    #3-you say that you connect to their machines to check their conditions... whatever that means exactly. You can map their computer management console directly to your machine and I * think * he didn't wake up the monitor.

    I hope this helps.

  • Satellite P100: How to activate the AHCI mode?

    As all you know, some laptops P100 series are equipped with a controller Intel 82801GBM SATA natively supports the AHCI and with a Fujitsu HDD which takes in charge the NCQ.

    However, the disc is forced in compatibility mode, and therefore the NCQ is disabled, resulting in a loss of performance (which is certainly necessary that laptop hard drives are generally slower than those of office).

    Unfortunately, there is no option in the BIOS which activates the AHCI mode and no tool like HWUtility that can twist that (although it wouldn't work). As far as I know, newer laptops support AHCI mode and there is also an option in the BIOS to enable it.

    Is it possible to activate the AHCI mode in our laptops beloved and make the most of our hard drives?

    Hello

    Do you think that the AHCI is disabled?
    You can run the Intel Chipset ID utility to determine if the ICH7DH SATA controller is already running in AHCI or not.

    However, I studied a little more on other forums that are a little more specific and find this:
    Activate the AHCI on Intel chipsets, without having to reinstall Windows 2000/XP
    http://www.Neowin.NET/forum/index.php?showtopic=457699
    and
    http://www-307.IBM.com/PC/support/site.WSS/document.do?lndocid=MIGR-62909

    But you know, everything you make are at your own risk!

  • G9 - 791 tried to activate the AHCI in the BIOS, killed for laptop

    Since I've upgraded to a SSD, I tried to activate the AHCI in the BIOS mode, just like I did with my Alienware laptop.  After changing the setting and restart, I was unable to boot the system (it's ok), but also unable to get into the BIOS to change it back to the RAID.

    Which led me to return the laptop to the place where I bought it and get a new, still under warranty.  Is there a reason any BIOS gets damaged when you change this setting?  I'd like to use the AHCI mode instead, but I can't afford another laptop brick.

    I got it! I actually downloaded and installed the most recent Intel (14.8.XXX), and then changed RST 4 setting in my registry to reflect the changes of the AHCI. Restarted without enabling AHCI in the BIOS, to make the site everything was still good. Perfect. Return restarted to the BIOS and activated ONLY AHCI. Does not all other parameters. Rebooted (twice), and everything works!

  • G62 b31ee I need to activate the ahci on my laptop please help

    Essentially I would like someone to change (or teach me how to change) my BIOS so that I can activate the hidden options and so tell - activate the AHCI.

    Hello:

    There is no way to do what you want.

    AHCI is enabled by default, and there is absolutely no way to change this.

    If you want to install Windows XP, then you should read the guide at the link below, read the Intel section and then read the downloadable document to integrate all drivers.

    http://h30434.www3.HP.com/T5/notebook-operating-systems-e-g-Windows-8-and-software/SATA-drivers-for-XP-solution-on-0x0000007B-BSOD/m-p/114120#M17758

  • How can I activate the pop-up Blocker

    How can I activate the blocker pop up on Firefox?

    drummershob said

    addons.Mozilla.org > Add-ons for Firefox > Extensions

    The Firefox Extensions section of AMO are for Office Max OSX, Firefox for Windows and Linux. Firefox Android extensions are to allplayer

    There is no section for the OS "Firefox".

  • Can I activate the Apple logo lit on the back of my 30 inch Apple display?

    Can I activate the Apple logo lit on the back of my 30 inch Apple display?

    It would be cool to see!

    It would be cool, but I don't think it was an aspect of the design. The back of my screen to the wall. The size and the quality of the image and the glass, I think, speaks for itself. The black Apple logo on finely designed aluminum case is very well see when switching from an office. We'll let the glowing Apple logos to Mac Air and MacBooks.

    Bravo!

  • How can I activate the plugins?

    Hello

    I can not activate the plug-ins.

    Today, I had a problem with firefox using too much CPU resources. I restarted my browser in safe mode to see if addons are the cause. I also disabled all the plugins. After I found the defective addon, I inexplicable firefox in normal mode. There is unfortunately no way to activate plug-ins now.

    Whenever I have activate a plugin it shows as enabled in the plugin list. But the plugins are not loaded on sites requireing them (Mozilla plugincheck can not find plug-ins active either: https://www.mozilla.org/de/plugincheck/).

    Restart the browser did not help either. After each restart, all plugins are shown as invalid later.

    What way is there to activate the plugins?

    Thanks in advance

    You can delete the pluginreg.dat file in the Firefox profile folder and perhaps as well to reset addons.sqlite the plugin registry data bases.

  • 1 TB 3.5 "DT01ACA100 Rev: AA10 AAA/607. I can not activate the mode of SATA3.

    My GA 970 a - DS3 motherboard. My Win7 64 bit OS. I can't activate the mode SATA3 hard drive. Please help me.

    The performance of the HARD disk and the interface will be recognized automatically. Sometimes the BIOS contains an additional parameter to toggle between the different SATA interface options. It would be interesting to check it out...

    The city 3.5 "HDD supports the Serial ATA 3. 0 / ATA 8 interface and in the case of the motherboards HARD disk controller support the SATA3, HARD drive should be able to provide the mentioned interface speed

    Here you will find details of the HARD drive:
    http://Toshiba.SEMICON-storage.com/e...t01acaxxx.html

  • How can I activate the top row of keys on Pavilion dv6000?

    How can I activate the top row of keys on Pavilion dv6000, they are turned off.

    If you have HP Quick Launch installed as suggested above and still no joy > > > try a hard reset, works sometimes. Disconnect all external devices first.

    battery and power cord 1 / removal

    2 - Press the power button for 20 seconds

    3 reinstall only the power cord for the first start.

    4. turn on

  • I can't activate the access code and/or touch id to protect info notes app. I've just updated to iOS 9.3 on my iPhone 6 s

    I can't activate the access code + / or touch code to protect information in the notes app. I've just updated to iOS 9.3 on my iPhone 6s +.

    What happens when you try?

  • How can I activate the pop-up blocked message?

    How can I activate the pop-up blocked message? When the message came I clicked on do not show this message again. I want this message to show when Firefox blocks a menu embedded, so I can allow the pop up if I want to.

    You can see a pop-up block icon in the right corner of the status bar if you have chosen to hide the information bar at the top.

    You can click on this icon of pop - up block on the status bar and remove the check mark [] «do not show an information message when pop-ups are blocked»

  • ICloud locked, I can't activate the phone!

    I got a 5 (United Kingdom, Vodafone) iPhone as a gift from my friend, now I can't can not activate the phone here in India, I saw specialists they said his blocked iclod/itunes, how can I solve it?

    You must contact the previous owner and ask him to remove this iPhone in the devices list. Otherwise, your iPhone will be a useless brick.

    Find my iPhone Activation Lock: a mechanism of extraction of the previous owner - Apple Support

Maybe you are looking for

  • What is the difference between the HP Pavilion 25xi and 2511 x monitors?

    What are the benefits of the HP Pavilion 25xi on the HP Pavilion x 2511 monitors and vice versa?

  • Pavilion G6-2210sa: unknown device problem - HPQ0004 (Code 28)

    I have a unknown device in my device on the PCI Express Root Complex Manager: ACPI\VEN_HPQ & DEV_0004 ACPI\HPQ0004 into the conduct of a preliminary search, it seems to be for HP 3D drive guard? But as my laptop is not supported no matter what more I

  • The camera missing after update settings

    Recently, I update my Attrix 4 g Android 2.3.2 to 2.3.4. Since then, some of the parameters of the camera app disappeared. The manual shows the options available in the settings of the camera must be: photo Res, Res video, exposure and review time, s

  • New HP 15-P151NR want to upgrade memory

    Just bought a HP Pavilion 15, model 15-P151NR (HP website: http://support.hp.com/us-en/document/c04490904 it came with a processor intel i5, but only 4 GB of memory.) I want to add more memory, but there is no specific memory port, and there only 1 D

  • HP Officejet Pro 8600 Plus: cartridge problem 8600

    Message seemed to change all cartridges - I changed two a couple of days, so they need not all change - black was about due for a change, so I took them all out - replaced black... had the same message... Replaced all - same message now also "one or