can I change on my board bios
I have the pegatron violet6 Board on my computer of p6320y. I upgraded my CPU to a phenom ii x 4 975. can someone tell me the jury which prevents me from overclocking the processor, and why doesn't the processor clocked at 3.6 gz? If I read it correctly, with cpuz, he turns to 3.2 gz. Thanks for any help.
Thanks again. I believe that the Commission will work fine. Just need to check a few more details. I appreciate the help with this.
Tags: HP Desktops
Similar Questions
-
Re: Satellite A50 - how can I change the boot with BIOS password priority?
I have a Satellite A50. I need to restore to factory default to recover DVD, how do I boot from the DVD?
The default boot priority is the HARD drive and is more bootable has been formatted. My BIOS is password protected, how can I change the boot priority? After having inserted the password, its always boot from the HARD drive.
Thank you
The boot priority, that you can change in the BIOS.
Go into the BIOS with ESC, enter your password and then you can change it.
But don t forget to save the changes.That s all and then you can boot from the CD.
-
How can I change the password for BIOS on HP Pavilion with Windows XP?
How to pass the password to the BIOS? The Pavilion my laptop let me use the F keys to access.
You will need to contact HP support.
They will know if there is a way around the existing BIOS password [it may not be a way to do].
They may require proof of ownership before help you.
Denis
-
T42 can't change BIOS settings
I can enter the BIOS very well, I just can't change settings in the BIOS settings screens because it says that I must be in 'admin' mode I entered the BIOS by pressing the button "Access IBM" blue, F1 or F12 and I encounter the same problem without worrying. It was previously the laptop from my brother and he put a BIOS password that I know and he told me one of the F - keys you will get in admin mode, but he forgets that one.
Thanks for any help.
Welp I finally got the password and turned that shit off the power. Thank you
-
How can I change the BIOS on Satellite A40?
How can I change the BIOS on the A40
Hi Denis,.
Toshiba ensure an update based on Windows and a traditional update of the disk of the A40. The new BIOS can be downloaded from the Toshiba web site http://uk.computers.toshiba-europe.com/cgi-bin/ToshibaCSG/download_bios.jsp?service=UK where you can also read the complete instructions on how to apply the new BIOS.
Please read the instructions very carefully, as errors in the procedure can lead to costly repairs.
Kind regards
-
Hello community,
I need to restore Windows on my ThinkPad Tablet 2 via USB. But I can't change the list of boot devices in BIOS. The F12 option is not available. It is said: "F12 key is used to call a pop-up the boot devices list. This option is available only when supervisor enters setup. »
What can I do?
Kind regards
The problem is solved!
-
Satellite L-30-after the update of the BIOS can't change the graphics memory value
I updated the BIOS to version 2.10, and now in the BIOS I have not possibility change memory graph... How can I change the graphics memory now? (Don t have backup old BIOS).
Satellite L-30-115 (SL30E), graphics: ATI Radeom Xpress 200 M
Hello. If you have ATI x200m and you wish to increase the Vram 256 MB, install the XP software + driver and you will be able to change the Vram. This function is not supported in Vista and BIOS setting.
-
Feature: switching my key board guard duties. For example. My question mark key switches to a strange E research and so on. Why? and how can I change?
the key Board has a symbol next to the? who's the stange E next to him on the same key, a lot of keys are like that. Can't change between the two.
Hi Tony,.
Thanks for posting in the Microsoft Community.
1 have you made changes to your computer recently?
2 are you facing this problem with all the keys in the keyboard?
3. What is the brand and model of your computer?
4. in which country are you located?
I suggest you follow the method below and check if it helps.
You must make sure both your countries in the region and the layout of the keyboard is the same.
Check this link for your region and country settings.
If your settings are not correct, please change it accordingly.
http://Windows.Microsoft.com/en-us/Windows7/change-the-country-or-region-setting
Check the input language of your keyboard us layout. http://Windows.Microsoft.com/en-us/Windows7/add-or-change-an-input-language
Also see this: Change your keyboard type
http://Windows.Microsoft.com/en-us/Windows7/change-your-keyboard-layout
Hope it will be useful. If you still have questions, please reply and we will be happy to help you.
-
I accidentally hit the wrong command on my key board and now forms are white and black outlines. How can I change the forms to their original colors? (I do not change the color of shapes, I think that I just changed it in some weird setting)
Figured it out! It was in 'outline' mode I went to view > preview and are back to normal.
How can Illustrator Adobe - I get out of the preview display? -Graphic design change battery
-
Can I change the uuid.location and uuid.bios by vCLI command?
Can I change or generate the uuid.location and uuid.bios by vCLI command? Or I have to use the VMware API function?
When I copied a virtual machine, in the menu "Question Answer", I have to choose "I copied it". Then I looked at the VM1.vmx and found only the uuid.location, uuid.bios and the ethernet0.generatedAddress have been changed. I can manually change them?
Thank you very much.
Post edited by: Percy1
The UUID is generated automatically just, it is not recommended that you change it yourself. If you want a particular fault that you keep or change it, you can add the following .vmx such as specified by this VMware KB - params http://kb.vmware.com/kb/1541
The MAC address can be changed, but you must make sure that you follow VMware Yes 00:50:56, this is a VMware KB with details - http://kb.vmware.com/kb/507
-
HP G62 keyboard key use normal function requires FN change. This can be changed?
My HP G62 laptop keyboard function keys have uses of media by default such as jump, stop, louder, quieter, wireless power. I rarely feel like that at all. But I use the terminal emulation function keys. For this I have to hit FN all the time before use. This can be changed?
Thank you!
Hello
Judgment of the laptop. Tap away at f10, you begin to get into the bios menu and see if you have the option described in the link below.
http://support.HP.com/us-en/document/c02035108
If you do, do not forget to press f10, select Yes and press ENTER to save the change.
Kind regards
DP - K
-
I can't access all the settings BIOS with Satellite Pro M10
Hello, I have a little problem with my satellite pro m10.
When I press the button 'on', I see the toshiba logo. (normal)
I want to get into the bios, I push the button "esc". Now, I see the message "check system. Then press [F1]. So, I push the F1 button.
Now I can see "password ='"
I push the button directly enter, and I have access to the bios. But my problem is that I can only change the date/time, password and the hard drive password.
I can't access to other environments, such as boot priority, show, another.In the beginning, I think it's the fault of password, but I try to change it and I have no results.
Please help me.
Kind regardsHello
What happens when you remove the BIOS password?
Have you tested it? If this is not the case, check it. -
Re: Portege M400 - cannot change anything in the Bios
I need to device boot cd-rom 1-st.
It has no operating system installed on my hard drive.I couldn't change my BIOS.
I hold down the button Esc then F1.After I see the Bios screen, but I can't change anything.
I can only escape without and with the changes?
No element can be changed?Can someone help me?
Hello
You do not need to change the boot device in the BIOS.
You can also set it in laptop power on.
Press F12, immediately after that the laptop has been powered
Then a start menu should appear.
Here you must choose ODD as boot device and should confirm with the Enter key.That s it
-
Tecra S5: Bios updated - cannot change page in the BIOS
I have improved my Tecra S5 BIOS to version 2.0. But when I enter the BIOS, I can only change properties on the first page PGUP PGDN keys, for change of page does not work for me. Everyone knows the same behavior?
There is a game of the bios supervisor password.
Turn on the laptop with the INS key. Now you can enter the supervisor password, and you will get the full bios.
You can change/clear the password and the policy settings using the password of Toshiba. -
Satellite Pro A40: How can I change the video ram
Hi I have an A40 my Ram video machine is set to 16 MB maximum is 64 MB
How can I change my 64 MB
I tried the bios theres nothing in there that will change, I have the latest version of the bios of the machine V1.50what someone of nowhere leaving to do this please
Jay
Hello
As much as I know the of A40 Satellite Pro supports the Intel 852GME shared memory graphic card.
S control Intel cards automatically memory allocation.This means that if the graphic card must more 16 MB of memory, the graphics driver will share the part of main memory!
The whole process runs automatically and you do not need to change anything!
Maybe you are looking for
-
Where is the button "next"?
The 31.2.0 of Thunderbird version, I downloaded for my new computer Windows 8 doesn't have a 'next' button I do not always choose to delete all messages, but I don't want to pass to the following. The latest version of Thunderbird on Windows 7 was a
-
I setup a gmail account to and works very well. When I try to add another gmail account, I get an error 'User name' or invalid password. I can connect to this second gmail via the web to gmail account and the account active imap. PS - I use these acc
-
missing in Windows 7 desktop calendar.
I was counting a lot on Windows desktop calendar that I had with Vista. My current computer runs on Windows 7, which doesn't seem to have a Windows desktop calendar. Is there a download available Windows that provides an interactive desktop calenda
-
Reinstalling Windows 7 problem
Hey all,. My PC was to have some bugs, so I decided to do a clean install of Windows 7, you use the disc that came with my Alienware Aurora. I start my PC from the CD and the Windows 7 Installer begins to launch. When I press 'Install on this compute
-
BlackBerry Q10 "no entry in this point of view".
Q10 Auto upload new version OS 10.2.1.2102. The lonely No. screen text message anything. "not entrΘes in this view. Someone has seen this and is there a solution? Thank you.