Can I check my speed of network (not the internet) on tv4 from apple?
Hello
I have problems streaming an HD movie to my pc windows to apple tv4, I use the plex app server and media. that works very well on all SD movies, but I get a lot of buffering on HD (10.9 Gig) movies, I tried wireless and ethernet, but both have buffering of questions then I would only test network speed I'm getting with wifi, ethernet via Powerline or direct ethernet so I know not to invest in a better wireless modem or if it's the software or other problems.
Thnaks in advance
Chris
think I saw and app for him but he could have been another internet speed measured only application
But if you have tried ethernet then unless your router is older then the wheel, then it would execute is 100Mbit which should be more then enough to stream hd you tried with hd movies less 10.9 GB seems a little heavy
Another thing you should consider is what format
Video formats
Video H.264 up to 1080 p, 60 fps, high level or hand Profile 4.2 or lower
Formats H.264 Baseline profile level 3.0 or lower with AAC - LC audio up to 160 Kbps per channel, 48 kHz, stereo audio in .m4v, .mp4, and .mov file
MPEG-4 video up to 2.5 Mbps, 640 x 480 pixels, 30 frames per second, basic profile with AAC - LC audio up to 160 Kbps, 48 kHz, audio stereo in .m4v, .mp4, and .mov file formats
of https://www.apple.com/tv/specs/
If your movies are in no! Another plex format could be all software decoding instead of leaving the appletv chip do material which means a better performance of the 1000 mkv or tastes would be in this category
You can try to convert them using the free converter called Handbrake program and see if you get better performance with h.264 codec
and your network could be innocent to 100% if the problems you are having
Tags: Apple TV
Similar Questions
-
I can access network, but not the internet.
I am able to access my network but not the internet. However, I can get on the internet if I use parallels. Does anyone else have this problem? If so, how have you managed to solve. I rebooted without parallels and nothing changes. Any suggestions?
In the menu bar, you select
▹ System Preferences... ▹ ▹ ▹ Advanced TCP/IP network
What values are given for the following?
Configure IPv4
IPv4 address
Subnet mask
Router
-
How can I check to see if I have the latest version of Windows XP?
How can I check to see if I have the latest version of Windows XP? If I don't have the latest version of XP, how can I install it?
There is not "later" version of XP - XP there and there is that Service Packs added to it.
To know what Service Pack level you are to start - run and type in "winver" (without the quotes)
If you find my answer helpful, please click the button "Vote as helpful"! Thank you!
My Windows Blog -
When ISE goes down, none of the computers can get to shared network or the Internet.
We only run Cisco ISE 1.4 with only computer authentication and recently had a power outage for about 6 hours. When the batteries of the UPS drained EHT servers are connected to the, none of the computers could connect what either. The NETWORK card on the computers had an error authentication failed. We "Rescue of unauthorized network access", selected on each computer. Is there a way to allow all computers access to the network and the internet as usual when the ISE servers are down?
The port configuration is less to:
switchport access vlan 77
switchport mode access
switchport voice vlan 777
IP access-group ACL by DEFAULT in
authentication event fail following action method
action of death event authentication server allow vlan 77
living action of the server reset the authentication event
multi-domain of host-mode authentication
open authentication
authentication order dot1x mab
authentication priority dot1x mab
Auto control of the port of authentication
periodic authentication
Server to authenticate again authentication timer
inactivity timer 180 authentication
restrict the authentication violation
MAB
no link-status of snmp trap
Auto qos voip cisco-phone
dot1x EAP authenticator
dot1x tx-time 10
QoS trust device cisco-phone
spanning tree portfast
spanning tree enable bpduguard
service-policy input AutoQos-VoIP-entry-Cos-policy
service-policy output AutoQos-VoIP-outputYou must use a script of EEM to change the ip access list that you assigned to the interface, to something with "permit ip any any" inside.
'action dead event server authentication allows vlan 77' won't work that in configurations in closed mode, do not use an acl of pre approval.
-
In the levels layer, I have only the option of 'grey '. When I create a fill layer, I can only see different levels of grey, not the color I chose. How can I change this?
Hi elizabethu,
Greetings!
Make sure that the image is not in gray mode.
If it is to change it to RGB mode.
Image-> Mode-> RGB
And try again.
Concerning
Jitendra
-
How can I purchase just after effects cc, not the cloud all creative/package?
How can I purchase just after effects cc, not the cloud all creative/package?
You can get a simple app for 19.99 USD per month.
Pricing plans and creative Cloud membership | Adobe Creative Cloud
Mylenium
-
How can I secure my laptop when I surf the internet via a public router at work?
How can I secure my laptop when I surf the internet via a public router at work? I mean if I use a router to work and others use too and I use a private laptop! I heard that someone hase the knoladge he can enter my laptop the couscous that he uses the same router I do. you have a special program for that, or is there a place in my computer that I need to enable to avoid the unwanted entries?
If your Windows is updated and your Windows Firewall is enabled and that you have updated anti-virus, that would be fine. In Windows 7, you must check Action Center in Control Panel to see your security status, if something is wrong that it will show a message in Windows XP and Windows Vista, he calls the center of security.
They may only enter your laptop or hack, if your firewall is disabled or there is a vulnerability in your system or a Malware would cause of vulnerability, and in all cases to ensure that your Windows updates and anti-virus is running, you are protected.
Another thing is that if your router requires the password, then choose strong password and change it regularly, if it is public without password or authentication, then you need to careful when visiting Web sites because they could be monitor and publicly display information. Some websites have encryption that in Internet Explorer, it shows as a lock icon pad indicating that your transaction is encrypted and you're safe.
It depends also wireless encryption in your company that will be in service by admin or SOUND Department if it's WPA2 which is good but for WEP or WPA, you should be very careful. I suggest to discuss this issue with your COMPUTER service too.
-
Can I use MSTSC to connect remotely on the internet?
Can I use MSTSC to connect remotely on the internet (local computer is Vista Ultimate SP2 to a distance Win 2003 Server)? I used MSTSC on my local network and it works well.
Hi Ibaltsae!
Thanks for posting. Yes, you can use MSTSC to connect remotely to a computer or server on the internet, the same as if you were using your local network. To connect to the remote computer, use the DNS or public IP that are associated with name.
I hope this helps! Shawn - Support Engineer - MCP, MCDST
Microsoft Answers Support Engineer
Visit our Microsoft answers feedback Forum and let us know what you think -
Can connect to the network, but not the internet, a "Local" access only
Just installed a new router and am now unable to connect to internet on my HP laptop. The laptop is running Windows Vista 64-bit Service pack 1. Pulling him diagnose & repair window returns a message indicating "your modem or router is not available.
I tried several things to get the internet to connect. I have reinstalled the driver, turned off the firewall, disabled the Internet Version 6 (TCP/IPv6) Protocol and manually configure the network connection.
I have a desktop computer with a wireless adapater that performs the exact same OS as the laptop and I have no problem with this connection.
I am able to connect to the internet if I connect the laptop to the ethernet cable. I am completely confused and would appreciate any advice!
Hi Ima be,
You can follow the steps below and check if that helps you solve the problem.
Method 1
Try to power cycle the router and the computer and check if it helps.
On the PC:
- Save your work and restart the machine.
On the router or modem (if wireless printing):
- Unplug the router and the modem.
- Wait 30 seconds.
- Plug in the modem and wait for it to come to the ready state.
- Plug in the router.
After you put cycle check the connection between the router and the computer.
Method 2
If the steps above do not help, you mayreset TCP/IP stack. To reset access the link below and either click on "Fix it for me" or follow the instructions to fix it yourself:http://support.microsoft.com/kb/299357
Disable the IP helpdesk:
1 hold the Windows key and type R, type "services.msc" (without the quotes) and press enter
2. scroll down to the IP assistance service, right-click on it and select Properties
3. in the drop-down list box that says "Automatic" or "Manual", set it to disabled and then click 'apply '.
4. then click on "Stop" to stop the service from running in the current session
5. click on OK to exit the dialog boxMethod 3
Disable IPv6 and remove IPv6 virtual cards:
Try to uninstall IPv6 on all interfaces, the removal of virtual cards of IPv6 and reset the TCP/IP stack. To remove the IPv6, go to the properties for each network adapter, and deselect the check box next to the Protocol "Internet Protocol version 6 (TCP/IPv6), which will turn off, or select it and click on uninstall, which withdraw power off the computer.» Then go into Device Manager and remove any 4to6 adapters, adapters miniport WUN or tunnel adapters.
NOTE: You should do this for each network connection, even if they are disabled.Method 4
Disable the DHCP Broadcast Flag:
Link: http://support.microsoft.com/default.aspx/kb/928233
Important: This section, method, or task contains steps that tell you how to modify the registry. However, serious problems can occur if you modify the registry incorrectly. Therefore, make sure that you proceed with caution. For added protection, back up the registry before you edit it. Then you can restore the registry if a problem occurs. For more information about how to back up and restore the registry, click on the number below to view the article in the Microsoft Knowledge Base:
http://support.microsoft.com/kb/322756. How to back up and restore the registry in Windows
Windows Vista cannot obtain an IP address from certain routers or some non-Microsoft DHCP servers
To resolve this issue, disable the DHCP BROADCAST flag in Windows Vista. To do this, follow these steps:
1. Click Start, type regedit in the search box, and then click regedit in the list programs.
2. If you are prompted for an administrator password or for confirmation, type your password, or click on continue.
3. Locate and then click the following registry subkey:
4 HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Services\Tcpip\Parameters\Interfaces\ {GUID}
5. in this registry path, click the (GUID) subkey that corresponds to the network adapter that is connected to the network.
6. on the Edit menu, point to new, and then click DWORD (32-bit) value.
7. in the new area #1, type DhcpConnEnableBcastFlagToggle and press ENTER.
8. right click on DhcpConnEnableBcastFlagToggle, then click on modify.
9. in the value data box, type 1 and then click OK.
10. close the registry editor.
By setting this registry key to 1, Windows Vista's trying to get an IP address using the BROADCAST flag in DHCP Discover packets. If that fails, he will try to obtain an IP address without using the BROADCAST flag in DHCP Discover packets.
You can also try uninstalling and reinstalling the driver for the wireless card.I hope this helps. Let us know the results.
Thank you and best regards,
Srinivas R
Microsoft technical support.
Visit ourMicrosoft answers feedback Forum and let us know what you think.
-
My laptop was working fine, until what I packed it inside my bag I always do and got chased home my MOM to my father's House; which is a few miles. I opened it upward, and he could not find any networks (wifi) available. I know that the problem could not be the router because everyone elses laptop in my work from home and because my laptop usually shows at least 4 or 5 other connections wifi available, and mine shows nothing at all. The problem is not the wifi switch is on. Help, please!
Hi Dubist,
You have a reason to think it might be spyware?It sounds more like material if it has just stopped working and there is no other issue.
Here's what I would do to try to understand the issue.
Type cmd into the search bar and press to enter. On the command line, type ping 127.0.0.1 and close to enter. You should get a response back as a result time. Something like that.
Reply from 127.0.0.1: bytes = 32 time<1ms ttl="">1ms>If you do not, close the window Device Manager and type in the search bar and look under network adapters. See if you have a wireless device it and make sure that there is no exclamation beside him points.
If you have exclamation points or of any error, reinstall the driver. If there is no device listed, it could just be dead and you can watch that need to buy a new external wireless card.
Tell us what you find and we can go from there. Matt
Microsoft Answers Support Engineer
Visit our Microsoft answers feedback Forum and let us know what you think. -
My laptop, connect to the network, but not the internet!
My laptop connects to the network media blank but not internet. My roommates using the network can connect to the internet. I tried various things but not vain. I also tried to get in touch with the Virgin on this subject, but they can help. Is it my laptop and is there something special I need to do with a computer hp laptop. Help, please! Thank you!
Hello
On the Start Menu, click programs principally made, click Accessories, right-click on command prompt and select "Run as Administrator". In the prompt, type the following commands, pressing on enter after each command. Include spaces in the commands, as indicated.
ipconfig/flushdns
nbtstat-r
nbtstat - RR
netsh int ip reset c:\resetlog.txt
netsh winsock reset
Type exit and press ENTER. Restart the PC and see if you can log in now.
Kind regards
DP - K
-
Can access folder on a computer, but not the other
I have a vista computer that has a folder that I want to join. I have 2 computers newly built win7. I can access the folder on the vista computer with win7 computers only. I went through everything I can think of and all settings appear to be identical between the two platforms of win7. I took a peek in the management of the computer sessions and my computer with win7 I can't access it from is listed as a guest, not my user name. I have no idea why, all the comp have same login name, password and admin access. I have disabled guest accounts. It's the only thing I can find different between win7 computers which could explain why I can't access the folder in question.
Anyone know how I can transfer my network setting win7 rig with access to the other without, or fix everything that's wrong with my access rights so that I can get the folder I want? I can see the drives and folders that I shared. I can not open them, I get one you don't have permission to access this folder message. I have everything I can find associated with sharing turned on (except the password) and everything related to the firewall disabled is trying to access.
Thanks for the pointers you can give me.
Hi Dave68_31,
This could be a problem with the permissions of files and folders. The following procedure will help you change the owonership and permissions of files and folders.
1. right click on the file or folder, click Properties, and then click the Security tab.
2. click on Advancedand then click the owner tab.
3. click on Editand then do one of the following:
o to change the owner to a user or group that is not listed, click other users and groups , in area enter the object name to select (examples), type the name of the user or group, and then click OK.
o to change the owner to a user or group that appears in the area of change of ownership to , click the new owner.
4. If you want to take ownership of the contents of the folder, select the checkbox replace the owner of sub containers and objects .
5. click OKand then click Yes when you receive the following message is displayed:
You are not allowed to read the contents of directory folder name. Do you want to replace the the directory permissions with permissions granting you full control?
All permissions will be replaced if you click Yes.
Note folder_name is the name of the folder you want to take charge.6. click on OKand then reapply the permissions and security settings that you want for the folder and its contents.
For your Information
Ø an administrator can take ownership of any file on the computer.
Ø assignment of ownership of a file or folder can require that raise you your permissions using user access control.
Hope this has been helpful.
Bindu S - Microsoft Support
Visit our Microsoft answers feedback Forum and let us know what you think[If this post can help solve your problem, please click the 'Mark as answer' or 'Useful' at the top of this message.] [Marking a post as answer, or relatively useful, you help others find the answer more quickly.]
-
ASUS Infinity wifi connects to the WRT54G Router and network, but not the internet
I have a WRT54G work throughout our House. It has 4 ports for wired ethernet and multiple wireless connections works without any problem. Currently my Droid phone, Tablet iPad and 2 laptops to connect and move to the internet via a wireless connection.
Today, I bought a new Asus TF700T Infinity tablet. I can so he can connect to the router, see the network and the router can see the Tablet Infinity (assigns an IP address), but no internet access.
I need some ideas here, or suggestions as to what tools I can use to see where the traffic of the Tablet is blocked. The newspaper on the router shows me nothing. I guess there is a port blocked by the router, but no idea those who.
Tried reset hard and a firmware upgrade does not. In fact the latest firmware upgrade (4.21.5) watered the entire network, so I started 4.21.1
Maybe it's not a router issue maybe that's the problem with the Tablet? Can ping you the ip address assigned to the ipad? You can also try t o assign a static settings on your tablet. If these things still do not work, you may need to contact asus support.
-
Dear expert;
I am very new to VCS and TP Cisco.
We implement now presence Cisco TV with VCS - C, VCS-E TMS, TCS, MCUS and endpoints with Jabber in a single edit.
and in another configuration CUCM 10.5, UCCX 10.5 IM & P, Jabber with some 10 officers.
Now the question is in our building on the 2nd floor we have an EX90 and on the 5th floor an EX90 and on local network, we can make video calls using the IP address.
In the same way is it possible to make a video call between 2 devices EX90 (both have public IP) present in a location different in the same city on the Internet without the participation of VCS - C and VCS-E.
It's the client request :)
Concerning
Paiva
Yes, but leaving these systems outside in nature with public IP addresses, leaving you are vulnerable to a number of questions. See for example http://www.videonationsltd.co.uk/2014/11/h-323-cisco-spam-calls/
https://supportforums.Cisco.com/discussion/12336591/sourceh323idcisco-incomingcalls
https://supportforums.Cisco.com/discussion/12340591/nuisance-h323-calls-SX20
The offers above with H.323 calls, in addition to this, you will encounter similar problems using SIP where the systems will be analyzed by tools such as SIPVicious
/Jens
Please note the answers and mark questions as "answered" as appropriate
-
How can I check if a file exists in the CVI real-time?
Also, it would be nice if designated so help file functions have been supported in real time or now.
I tried this:
If (GetFileAttrs (DataFileName, NULL, NULL, NULL, NULL) == - 1).
You can check if a file exists in the CVI real-time using GetFileInfo.
CVI provides a list of the available functions in the CVI real-time here: CVI real-time functions
Maybe you are looking for
-
I complete the registration
-
Hello I want to start to use the Photos for Mac app, but I can't find the tool compare - compare the original image with the edited version.
-
Your opinion about RAM latency
Hello This may seem like a silly question but, is it better (performance wise) have a high density of RAM with a high latency (e.g., 1 G CASE 5-5-5-15) GOLD of low density and low latency (512 MB 4-4-4-12, for example)? Thank youOliver
-
How can I enable AutoCorrect?
I went to settings, keyboard, AutoCorrect. The button is green. I slide it more, to reset iPad and he turned his back. AutoCorrect turned green but nothing. Any suggestions?
-
Second Bay hard drive to replace the Blu - Ray player
Does anyone know if this drive Bay would work on the Y580? http://www.Amazon.com/micro-SATA-cables-optical-adapter/DP/B005L94EAM/ref=sr_1_2?ie=UTF8&QID=1354201... I need to find one from a seller we.