Can I copy the list of names of files and paste them into a table

Similar Questions

• How can I copy the list of names of files in the finder and set the Clipboard filenames separated by commas?

  Hi guys, I was wonder if anyone can give me a hand with a script.

  I need to be able to paste a list of file names of the files as follows:

  0001.jpg 0002.jpg 0003.jpg 0004.jpg

  At the moment, if I select the files in the Finder, copy to the Clipboard and paste them in TextEdit, they are like this:

  0001.jpg

  0002.jpg

  0003.jpg

  0004.jpg

  I found a similar but slightly different script and I don't know how to change it. Here it is:

  Define extension_list to {"jpg", "" JPG","jpeg","JPEG"}

  the value cbNames (Clipboard text) paragraphs

  Set csvNames to {}

  the tid value delimiters to point to the text of the AppleScript

  the text value of the AppleScript point delimiters ".»

  -now, make a list of names without extensions

  Repeat with the names in cbNames

  If the point 2 of the text names is extension_list then

  copy of text 1 of names at the end of csvNames

  end if

  end repeat

  Journal csvNames

  -now the filenames as comma CONCATENATE string separated

  the text value of the point delimiters AppleScript «»

  csvNames value cross-as text

  the text value of the point AppleScript delimiters tid

  There is an easier way. Open a TextEdit document and paste the list in. Place the cursor at the end of the first item and drag it to the start of the second.

  

  Press on + command + c to copy and then command + f to bring up find it. Press command + v (do not click in the first search field). Check the 'Replace' box, click in the field replace, and then type a comma and a space.

  

  Click 'All' and then 'done '.

  

• I would like to copy the time elapsed since WMP 11 and paste it into a Word document.

  I would like to copy the time elapsed since WMP 11 and paste it into a Word document. I have this on several occasions, is there a way to shortcut this process through Autohotkey? Would appreciate any help at all!

  Hello

  1. What is the operating system installed on your computer?

  Unfortunately, there is no shortcut key to copy the time elapsed since Windows Media Player.

  You can use your favorite search engine to search for any third party software that accomplishes your request.

  NOTE: third software of third parties, including hardware drivers can cause serious problems that may prevent your computer from starting properly. Microsoft cannot guarantee that problems resulting from the use of third-party software can be solved. Software using third party is at your own risk.

• How can I extract the data from a csv file and insert it into an Oracle table? (UTL_FILE)

  Hi, please help me whit this query

  Im trying to extrate the data in a file csv and im using the ULT_FILE package
  I have this query that read the file and the first field, but if the field has a different length does not work as it should

  For example if I had this .csv file:

  1, book, laptop

  2, pen, Eraser

  3, notebook, paper

  And in the table, I had to insert like this

  ID descrption1 description2

  laptop 1 book

  Eraser pen 2

  paper laptop 3

  For now, I have this query, which displays only with DBMS:

  Declare

  -Variables

  Cadena VARCHAR2 (32767).

  Vfile UTL_FILE. TYPE_DE_FICHIER;

  Dato varchar2 (200);                                             -Date

  dato1 varchar2 (200);

  dato2 varchar2 (200);

  Identifier varchar2 (5): = ', ';                             -Identifier (en)

  v_ManejadorFichero UTL_FILE. TYPE_DE_FICHIER;     -For exceptions

  -Table variables

  I_STATUS GL_INTERFACE. % OF STATUS TYPE.

  I_LEDGER_ID GL_INTERFACE. TYPE % LEDGER_ID;

  I_USER_JE_SOURCE_NAME GL_INTERFACE. TYPE % USER_JE_SOURCE_NAME;

  I_ACCOUNTING_DATE GL_INTERFACE. TYPE % ACCOUNTING_DATE;

  I_PERIOD_NAME GL_INTERFACE. TYPE % PERIOD_NAME;

  I_CURRENCY_CODE GL_INTERFACE. CURRENCY_CODE % TYPE;

  I_DATE_CREATED GL_INTERFACE. DATE_CREATED % TYPE;

  I_CREATED_BY GL_INTERFACE. CREATED_BY % TYPE;

  I_ACTUAL_FLAG GL_INTERFACE. TYPE % ACTUAL_FLAG;

  I_CODE_COMBINATION_ID GL_INTERFACE. TYPE % CODE_COMBINATION_ID;

  I_ENTERED_DR GL_INTERFACE. TYPE % ENTERED_DR;

  I_ENTERED_CR GL_INTERFACE. TYPE % ENTERED_CR;

  I_ACCOUNTED_DR GL_INTERFACE. TYPE % ACCOUNTED_DR;

  I_ACCOUNTED_CR GL_INTERFACE. TYPE % ACCOUNTED_CR;

  I_TRANSACTION_DATE GL_INTERFACE. TRANSACTION_DATE % TYPE;

  I_REFERENCE1 GL_INTERFACE. REFERENCE1% TYPE;

  I_REFERENCE2 GL_INTERFACE. REFERENCE2% TYPE;

  I_REFERENCE3 GL_INTERFACE. REFERENCE3% TYPE;

  I_REFERENCE4 GL_INTERFACE. REFERENCE4% TYPE;

  I_REFERENCE5 GL_INTERFACE. REFERENCE5% TYPE;

  I_REFERENCE10 GL_INTERFACE. REFERENCE10% TYPE;

  I_GROUP_ID GL_INTERFACE. GROUP_ID % TYPE;

  BEGIN

  Vfile: = UTL_FILE. FOPEN ('CAPEX_ENVIO', 'comas.csv', 'R');

  loop

  UTL_FILE. GET_LINE(Vfile,Cadena,32767);

  dato1: = substr (cadena, instr(cadena, identificador,1,1)-1, instr(cadena, identificador,1,1)-1);

  dato2: = substr (cadena, instr (cadena, identifier, 1, 1) + 1, instr(cadena, identificador,3,1)-3);

  dbms_output.put_line (dato1);

  dbms_output.put_line (dato2);

  -The evidence

  -dbms_output.put_line (cadena);

  -dbms_output.put_line (substr (dato, 3, instr(dato, identificador,1,1)-1));

  -dbms_output.put_line (substr (dato, instr (dato, identifier, 1, 2) + 1, instr(dato, identificador,1,1)-1));

  -dbms_output.put_line (substr (cadena, 1, length (cadena)-1));

  end loop;

  UTL_FILE. FCLOSE (Vfile);

  -----------------------------------------------------------------------------------EXCEPTIONS------------------------------------------------------------------------------------------------------------------------------------------------------------

  EXCEPTION

  When no_data_found then

  dbms_output.put_line ('Todo Correcto');

  When utl_file.invalid_path then

  UTL_FILE. FCLOSE (V_ManejadorFichero);

  RAISE_APPLICATION_ERROR (-20060,'RUTA DEL ARCHIVO NULLIFIED: (');)

  WHEN UTL_FILE. INVALID_OPERATION THEN

  UTL_FILE. FCLOSE (V_ManejadorFichero);

  RAISE_APPLICATION_ERROR ('-20061,'EL ARCHIVO NO PUDO SER ABIERTO ");

  WHEN UTL_FILE. INVALID_FILEHANDLE THEN

  UTL_FILE. FCLOSE (V_ManejadorFichero);

  RAISE_APPLICATION_ERROR (-20062, 'INVALIDO MANAGER');

  WHEN UTL_FILE. WRITE_ERROR THEN

  UTL_FILE. FCLOSE (V_ManejadorFichero);

  RAISE_APPLICATION_ERROR (-20063, 'ESCRITURA ERROR');

  WHEN UTL_FILE. INVALID_MODE THEN

  UTL_FILE. FCLOSE (V_ManejadorFichero);

  RAISE_APPLICATION_ERROR (-20064, 'MODO INVALIDO');

  WHEN UTL_FILE. INTERNAL_ERROR THEN

  UTL_FILE. FCLOSE (V_ManejadorFichero);

  RAISE_APPLICATION_ERROR (-20065, 'ERROR INTERNO');

  WHEN UTL_FILE. READ_ERROR THEN

  UTL_FILE. FCLOSE (V_ManejadorFichero);

  RAISE_APPLICATION_ERROR (-20066, 'LECTURA ERORR');

  WHEN UTL_FILE. FILE_OPEN THEN

  UTL_FILE. FCLOSE (V_ManejadorFichero);

  RAISE_APPLICATION_ERROR ('-20067,'EL ARCHIVO ARE ESTA ABIERTO ");

  WHEN UTL_FILE. THEN ACCESS_DENIED

  UTL_FILE. FCLOSE (V_ManejadorFichero);

  RAISE_APPLICATION_ERROR (-20068, 'REFUSED ACCESS');

  WHEN UTL_FILE. DELETE_FAILED THEN

  UTL_FILE. FCLOSE (V_ManejadorFichero);

  RAISE_APPLICATION_ERROR (-20069, 'OPERACIÓN BORRADO FALLO');

  WHEN UTL_FILE. RENAME_FAILED THEN

  UTL_FILE. FCLOSE (V_ManejadorFichero);

  RAISE_APPLICATION_ERROR (-20070, 'OPERATION SOBREESCRITURA FALLO');

  END;

  Hello

  Try something like this:

  POS1: = INSTR (cadena, idntificador, 1, 1);
  POS2: = INSTR (cadena, idntificador, 1, 2);

  ID: = SUBSTR (cadena, 1, pos1 - 1);
  description1: = SUBSTR (cadena, pos1 + 1, (pos2 - pos1)-1);
  Description2: = SUBSTR (cadena, pos2 + 1);

  where pos1 and pos2 are numbers.

  Rather than use UTL_FILE, consider creating an external table.  You won't have to write any PL/SQL, and this means that you won't be tempted to write a bad article of EXCEPTION.

• Can someone copy the solitaiare program shipped with XP and send it to me?

  Can someone copy the solitaiare program shipped with XP and send it to me?

  The original fix told to look for "Windows setup" in Add/Remove programs - I have not this to be listed. I searched my computer whole looking for 'sol.exe' does not exist. It must have been removed for cleaning upwards, I have no other games. Who knows, it is an old computer, I give my people JUST TO PLAY SOLITAIRE. Any other ideas?

  Can someone copy the solitaiare program shipped with XP and send it to me?

  Hello

  ·         Did you try clicking Add/Remove Windows components in Add or remove program?

  Solitaire game is built into Windows XP, you can install it via Add/Remove Windows components in Add / Remove Program:

  (a) Insert Windows XP CD

  (b) open the Control Panel

  (c) open Add or remove programs

  (d) on the left side of the window Add or remove programs , you will see Add/Remove Windows components.

  (e) click on Add/Remove Windows components , it will open Windows Components Wizard.

  (f) double click on Accessories and utilities it will open window utility and accessories.

  (g) games -double-click and select the box checkbox on Solitaire.

  (h) click Ok and Next to reinstall the game of Solitaire.

  If the check box is already selected for the games, you can try if you deselect and rechecked the games area, then check if it helps.

  How do I add or remove games in Windows XP

  http://support.Microsoft.com/kb/307768

• How to copy phone numbers and paste them into the Dialer?

  Hello everyone!

  I posed in the title, how can you copy phone numbers and paste them into the Dialer to make calls?

  Thank you!

  I can't send a report - I am a normal user like you but I was help other owners for awhile better as I can - to contact Sony care use this link http://www.sonymobile.com/global-en/support/contact-us/

• I just looked at problems with importing files from nikon D810 in LR 5.7 it pop a window saying it can't read the files to work on an imac 27 "yosemite on my mac pro running after several times he finally managed to read files and import them into LR

  I just looked at problems with importing files from nikon D810 in LR 5.7 it pop a window saying it can't read the files to work on an imac 27 "yosemite on my mac pro running after several times he finally managed to read files and import them into LR, I never had this problem before there was a sort of update that could from cause?

  What is the destination folder that the date be underneath?  In the top right it says users who suggests, you try to put the photos on top of your username instead of under your username.  Maybe that's the problem.  So change your folder in the drop-down list at the bottom right of what it should be rather than users, and if you're going to show us the destination of your photos at least scroll through the list of folders down right so that we can see which is the white highlight.

  Here is how mine looks like if I want to put my photos imported under my subfolder users - Steve - photos by date:

  

• With IE8, I could copy a graphic from a Web page and paste it into Excel (each entry has appeared in his own cell) - is there a Firefox setting that allows me to do this?

  The question < bit much > says it all - there are several financial web sites that provide the account chart activity. With IE8, I could copy the mires and paste them into Excel with each "category" mentioned in individual cells (text and digital). This allows for monitoring and handling and, at least in some cases, was better than the "Download" function provided. When I try it with Firefox, all data is pasted into a single cell (reminds me of a delimited file importing - if digital indicators / text or cells separators are not identified correctly Excel will import all the data into a single cell).

  See:

  • Dafizilla Table2Clipboard: https://addons.mozilla.org/firefox/addon/dafizilla-table2clipboard/

• Copy of a flash file and paste it into another...

  I want to copy a .swf file I have and paste it into another one, executives and all.  I tried but nothing is copied on correctly.  Or are my buttons on a single image... and no longer act as a button with Up - too-Down-Hit managers.  Is this possible? Help, please...

  Thanks guys,.

  -Dedikation-

  Select all of the frame of the timeline, right-click the selection, and choose copy image.  In the other file, insert-> new symbol-> MovieClip... etc...  Select the key of one layer only the empty movieclip, then right-click the selection and choose Paste images.  All layers and managers must paste that they were copied.

• How can I copy only a part of a file and move it to another folder

  I have more 100 000 music files in a folder on my external hard drive. I started to copy them to another disk to save the backup, but after 8 hours of copy and before the end of the copy, the computer stops and the copy process has been interrupted.  How could I go to continue the copy process without having to start from the beginning?

  You can hold down the key left mouse and wide from bottom right to top left, or vice versa, to highlight.

  Other ways include:

  To highlight all - point peak one and Ctrl + A will highlight all.

  To highlight a section - highlight the first one you want. Scroll to last and click while holding down the SHIFT key.

  To highlight several messages that affect - hold down the CTRL key while you click each message in order to highlight.

• You can copy several fields in a pdf form and paste them elsewhere?

  I created forms in Adobe 9 Standard and are posted on our company for users to access intranet. All forms work well, but a group wants to be able to copy and paste the data from the form in our call tracking software for later use. It is now possible by copying and pasting each field one at a time. Is my question there a way to copy multiple fields at once and paste the data elsewhere in the text even simple, no recognition of fonts not required.

  Kerry N

  Unfortunately, you won't find that in Reader.

  The only thing I could suggest is to send you the file, then you can export it to text and send it. If it's only one or two now and then, it would not be a big deal, but to run if they have hundreds of them...

• How can I copy a sentence from a Web site and paste it in another site?

  Copy-paste thing

  Hello

  • How can I copy and paste text on Android?

• get the name of a directory file and insert it into a table

  Hello
  
  I have a requirement, I need to read the name of a Linux directory file and enter the file name in a variable,
  
  After that, I need to insert this file name in a table.
  
  EX: is it a file1.txt in Yearbook of the CBA, and I read that 'file name' in the v_file_name variable and I'm going to insert this file name in a table.

  Hello

  I think you've got your request of replied by Chantal.
  Shoul you have a kind of intelience in the name of the file itself so that ODI retrieves the correct file and insert into the table.

  Thank you
  Fati

• How can I take short videos of my digital camera and combine them into one video.

  I went to a class reunion and took several short videos and want to combine them into one so that I can make a DVD with photos and videos.

  What is the format of the video clips? Are they compatible
  with Windows Live Movie Maker and Windows DVD Maker?

  First... If you import video clips in Windows group
  Creating DVD... Each clip becomes a scene (chapter).

  Or... you can import the group into Movie Maker add them
  for a project and save it as a. WMV video file... cela will combine
  in a single file.

  Also... Format Factory free software has a Video Joiner
  option that will join files very quickly and can be
  worth a try.

  (FWIW... it's always a good idea to create a system)
  Restore point before installing software or updates)

  Format Factory
  http://www.videohelp.com/tools/Format_Factory
  (the 'direct link' is faster)
  (the file you want to download is: > FFSetup270.zip<>
  (FWIW... installation..., you can uncheck
  ('all' boxes on the last screen)

  First, you will need to decompress the file or just open the
  Drag FFSetup270.exe out of the folder
  and drop it on your desktop. To install left click.

  Next, after the download and installation of Format
  Factory... you can open the program and
  left click on the toolbar, the "Option" button and
  "Select an output folder to" / apply / OK.
  (this is where you find your files after they)
  are converted)

  Once installed, open Format Factory... to the left
  pane... Choose... Advanced / Video Joiner...
  On the left, click on the button Add file and import your video
  clips. Choose an output format and on the left, click OK.

  On the left, click on the Start button in the toolbar and your
  video files will be combined.

  Good luck...

• How do I get the content from another file and paste it into the active document instead of certain string?

  I am newbie in indesign scripting of animals. So I apologize because I couldn't post my essays.

  Objective:
  I have a .indd document which will be a figure of legend, label etc. I need to copy the content (a figure that is editable) else file indd of this document where the tag figure exists.

  For example:
  Sample.indd

  Some text Fig.1.1 caption some text 

  I need to copy the contents of figure1.indd and paste in the document sample.indd where Fig.1.1 string exist and so forth. Now I do it manually. But am supposed to automate this process.

  So, I need some hint how to do it using extendscript?

  I found something like below, to do so, but I have no idea to develop it further and also do not know if this approach is correct my results. Please help me

  myDocument=app.open(File("file.indd"),false); //opening a file to get the content without showing. 
  myDocument.pages.item(0).textFrames.item(0).contents="some text"; //here I could set the content but I don't knw how to get the content 
  // ?????? Then I have to paste the content into active document.
  
  

  Try this test nicely to your and end, hope this will help you.

  var myDoc = File("/D/Sample.indd");//Figure File
  var myFigDoc = File("/D/Figure.indd");//Destination File
  app.open(File(myFigDoc));
  app.activeDocument.pageItems.everyItem().select();
  myObj = app.selection;
  var myGroup = app.activeWindow.activePage.groups.add(myObj);//Grouping the objects
  myGroup.select();
  app.copy();
  app.open(File(myDoc));
  app.findGrepPreferences = app.changeGrepPreferences = null;
  app.findGrepPreferences.findWhat = "Fig 1.1";//Figure caption text
  app.findGrepPreferences.appliedParagraphStyle = "FigureCaption";//Figure Caption Style
  myFinds = app.activeDocument.findGrep();
  for(var i=0;i