Can I detect if a module is present in CRIO FPGA?

Similar Questions

• How can I detect dynamically new modules of the cFP-2200?

  Hello

  I'm working on a project that monitors the voltage using the cFP-2200 with any number of PSC-HAVE-102 installed modules. Each analogue channel PSC-HAVE-102 will correspond to its own state machine which tells you a central database.

  I want to create something that does not need to know how the PSC-HAVE-102 s settled in advance. At startup, my software must be able to detect all PSC-HAVE-102 s and dynamically create the State machines for each channel, if I have 1 I-102 (8 analog monitor channels), or the maximum of 8 installed (64 channels to watch).

  Right now, I can only understand how to the program for channels that are currently available by connecting to the module in its current condition and click/drag the analog channels in the project window. Is it possible to program for strings that are not there, but could be later? The application of this is to deploy the module on the ground and have the ability to add or remove I-102 s without changing the installed software.

  kgolden,

  Do you mean that the ini file will be correctly created only if I have the number I-102 s max?  Yes, you must have 8 I-102 in your project as part of the goal of the PSC.  Forcing him to be included in the. The IAK file and in turn to be defined in the .ini causes.  I think you can use the Project Explorer to add modules to the CFP, even if they do not exist physically.

  Is it possible to manually edit the file instead?  I think that it is possible to manually edit the .ini.  I don't know that NEITHER does not bear this manual change.  The question would be is there other on the CFP .ini files that contain references to the i/o modules installed?

• Satellite U200-181: How can I check if the TPM Module is present

  How can I check Trusted Platform module is present or not?

  Hello

  The TPM module (trusted platform module module) configuration is done in the BIOS Setup program, and this feature is available only with certain models.

  I put t know if the U200-181 is favorable or not, but you can check it out yourself.
  Safety controller parameters should be available in the system BIOS Setup on the second site.
  If the device supports the TPM module, you should see the switch to enable or disable this security option. Generally according to the default TPM module is disabled.

• How can I change the model modules?  When I click on module it said I did not, but the model has 3.

  I'm new to Business Catalyst.  My site is litigationstore01.businesscatalyst.com.   3 modules are present in the model that I use which lead to 3 different product pages.  I can't find the place to change these modules.  When I click on modules in the left column a model of module group arrives, but not a way to edit what's already there. What Miss me?

  Hey there,

  Those who are not of the modules, they are produced by what I assume is the module recommended products. Depending on how this module is implemented it will use will be list or the backup from the list.

  Wise FTP it would be produced Layouts - OnlineShop - small and small backup product.

  The developer reference

• Mac book air cannot detect my iPhone 6, after the cable on my I phone 6 to connect with my mac book air, nothing appear on the mac book. Seems like it can't detect the file i phone 6. I want to export my photos and do the upgrade version.

  Hi, after plug the cable on my phone i 6 to connect with my mac book air, nothing appear on the mac book.

  Seems like it can't detect the file i phone 6. I want to export my photos and do the upgrade version.

  Current situation is nothing exportable phone and also cannot do anything mac book because they cannot detect each other. Please advise, thank you.

  You can try to move to a different USB port. And if your just trying to swap photos try Airdrop. Also try to go here If iTunes does not your iPad, iPhone or iPod - Apple SupportHope this help, good luck to you.

• Boot Camp can not detect Windows software support

  Hi guys!

  1. I have a question, I started my bootcamp and pressed the 2 first options and clicked on continue:

  http://postimg.org/image/9mly0tvjl/

  2. that's what I did to "2." step. I chose the iso file of Windows 7 Home Premium and boot camp agreed and loading all fine!

  http://postimg.org/image/tg97p5fu5/

  3 and now it was time for step 3:

  http://postimg.org/image/554gf7i3x/

  After Boot camp let me decide how many GB, I want to save for Windows... I got 500GB (half) and clicking 'Install'... but the problem is here...

  It is said that: "Boot Camp can not detect Windows supports software.." and so on.

  Where do you think the problem is? Is - this problem on the ISO file?

  I would appreciate any kind of help,

  Thank you.

  What year/model is your Mac? Please see step 11 in install Windows 7 and previous versions on your Mac with Boot Camp - Apple Support .

• Skype can't detect webcam

  Hello

  I use an ASUS A43T laptop and my Skype can't detect the integrated webcam. It worked fine until a few days ago. I tried to test my webcam via other online sites and it works very well. Update my driver for the webcam. Skype is in its latest version. I tried uninstalling and reinstalling Skype, nothing works. Help please!

  yijern wrote:
  

  What do you mean by "Asus Virtual Camera is not selected as video source"?

  That's my problem basically:

  

  Uninstall the currently installed version of Skype and install the 6.14.0.104 previous version:

  http://download.Skype.com/MSI/SkypeSetup_6.14.0.104.msi

• Pavilion dv2500: can not detect our connection to wifi PLDTHOMEFIBR (our own connection)

  Hello community of Hp.
  
  I have a problem with my PORTABLE HP PAVILION dv2500 PC.
  
  A few months ago, everything is ok.
  
  It can detect our wifi.
  
  then yesterday I just know that it can not detect our wifi at home.
  
  I mean that my laptop can detect our neighbors wifi. but it can not detect our own wifi.

  I already perform some troubleshooting method.

  the first thing I did.
  
  is that I perform a RESET of my modem.
  
  because I think that the IP of my laptop has been block by my modem.
  
  If, after that, it's the same. It can not detect our wifi.

  second is.
  
  I reformat WINDOWS Vista x 64.
  
  but it's the same thing.
  
  It can only detect our neighbors wifi. but our is not.

  last thing I did was to change the ip address of my laptop.
  
  but it did not solve my problem either.

  pls help me solve this problem.
  
  
  
  Thank you.
  
  and God bless you all.
  
  more power for the team of hp with this site.
  
  
  
  Please send me an email or comment here if you have an idea on how to solve my problem.
  
  [Personal information]
  
  Thanks again and best regards.

  Hi @BooJimBoo,
  
  Thank you for visiting the HP Forums! A place where you can find solutions for your problems, with the help of the community!
  
  I stumbled upon your post on the HP laptop and wanted to help you! I looked in your question about your Hp Pavilion dv2500 Notebook and problems with the wireless connection. Try to reset the router. Wait 30 seconds before plugging and unplugging the router to make sure, it resets completely. Here is a link for troubleshooting wireless connection, if you need. Section I fell better help is the key to security is changed 3. To establish a new connection to the wireless network, return to the network sharing Center window, select set up a connection to a network.

  If the problem persists, I would change the channel on the router. Routers are able to communicate to your laptop on several different channels. You can contact your Internet provider.

  Some say that this download will help fix this Microsoft Fix it.
  
  Here is a linkto help as well.
  
  Please let me know how it goes.

  You can say thanks for trying to help by clicking on the Thumbs Up below! .
  
  Thank you.

• Project Explorer can not detect my PXI-7952R

  I use PXI-7952R and SMU-8115 in a chssis SMU-1071. When I opened MAX, my PXI7952R camera seems to be detected (if I'm not mistaken). However, when I try to open a new FPGA project, the Project Explorer can't detect it. is this a configuration problem or the device?

  PS: I am really new in this field.

  If you want to add a remote target of a project, you right-click on the project and select new > objectives and devices like you were doing it. However if you want to add a FPGA device, you select the target who has access to the FPGA, just right click and select new > targets and devices. In this case, you should be good by clicking in the project is 'my computer '.

  

  Also make sure you have installed NI FlexRIO.

• HP 15 D103tx: can't detect the wireless network adapter in Device Manager.

  

  I can't detect wireless network adapter in the device even Manager after installing the drivers wireless from the following link: http://support.hp.com/in-en/drivers/selfservice/HP-15-d100-Notebook-PC-series/6782098/model/6837966?...

  Wireless "F12" key remains orange color after pressing it several times. I tried to install "Drivers HP wireless button" from the link above, but between th installation process I have error ot OS isn't accomanied for pilots

  

  I can't connect to a wireless network from my wireless adapter doesn't work. I have to sit near my wifi router to connect with laptop computer using lan cable.

  Even HP Support Assistant does not detect the wireless network card hardware

  

  Help, please!

  Hello

  According to HP Partsurfer, your lapotp came with Atheros AR9565 802.11bgn 1 x 1 WiFi and Bluetooth 4.0 adapter combination WLAN. Also, your laptop came with FreeDos and I guess currently installed Windows 8 64 bit OS, I am correct?

  The Support page for your machine, doesn't show that the Realtek RTL8188EE 802.11b/g/n Wireless LAN Driver for Windows 8.

  Please download, save & install the Dirver and restart the system, check if the wireless works.

  Concerning

  Visruth

• Can't detect the wireless, gateway 4025gz. mod, turn on wireless, Dosnt show the icon in the login screen. OK before wipjng drive.

  Can't detect the wireless, gateway 4025gz. mod, turn on wireless, Dosnt show the icon in the login screen. OK before wipjng drive.

  If it worked before wiping the disc, then it is likely, you are missing a player specific to material not included in WIndows XP.  Log on to the gateway website and download the drivers for the chipset and network.  Naturally, you will need to use a wired network connection.

  In general, Gateway provides the drivers specific to the hardware on a recovery of the system partition, and they also provide a tool so you can burn data on CD/DVD restore.  Do you stil have this partition or did you remove it?

  Every time I buy a PC, I always download copies of the material of the web site of the vendor-specific drivers and keep them on a flash drive, so that they are available when I wipe a PC and reinstall.  I also do the recovery partition recovery disks.

• I have my laptop can't detect a wireless adapter or access point. It shows that the network connection is excellent but I can't always connect to the internet.

  I have my laptop can't detect a wireless adapter or access point. It shows that the network connection is excellent but I can't always connect to the internet. It happened suddenly and with no warning or cause. I tried to turn off the modem for 10 seconds and turning it back on, but I still had the same problem. What should I do? Help, please.

  Hello

  Maybe this can help, http://www.ezlan.net/wireless.html

  Jack-MVP Windows Networking. WWW.EZLAN.NET

• SanDisk Cruzer Blade USB key can not detect properly by Win 7 64 bit

  Hi all:

  I have this problem on and outside.

  This time, it's ok and next time can be bad that the USB device is unable to detect Win 7 64 bit. It's OK to Win Xp all the time.

  I have referred to as the previous posts for this problem and remove the VID_0781 by REG_EDIT, also try to uninstall the device from the hardware in the computer and re - install the device. I also did the replacement of usbstor.inf in c:\windows\inf to another subfolder.

  from c:\windows\.

  The result is intermittent it's Ok this time and not okay at other times. It's really wasting a lot of time to try this or that, and the result is intermittent.

  Can anyone or Sandisk people leave a good and permanent solution to this problem?

  Thank you and best regards,

  tangsuan

  Hi all:

  I want to update this solution for this problem of Sandisk support.

  This solution may be different from one case to another, but if you have installed Samsung KIES in PC, then most likely it is the solution.

  If you kill the KiesTrayAgent.exe, the Sandisk can be detected smoothly whenever you plug it into my laptop.

  Thanks and respect of the best.

• Computer can not detect any sound cards and graphics or communication ports.

  Recently I reinstalled Windows using the CD, I had Dell, when I bought my computer. However, when I was done with the installation, I went on youtube to look at things and I realized that the sound was not working. I thought I must have forgotten to install the driver for my sound card, then when I tried to install, it says something in the sense of "error". - Impossible to find Port Com1 I looked into this a bit on google and found that it is probably disabled in my BiOS. I'm not sure what to do after that, but I hope that someone knows why my computer can not detect anything.  hate viruses

  http://support.Dell.com/support/downloads/index.aspx

  Go to Dell website > drivers and downloads Section > key in your model number > get latest XP drivers for it > download/install them.

  See you soon.

  Mick Murphy - Microsoft partner

• 5.0.2 Android Xperia Z3 can not detect mobile data

  I just update my Sony Xperia Z3 lollipop 5.0.2. After update, I can't detect my mobile data, but there is no problem with the WiFi connection. Can someone tell me how to solve this problem. Please help me. I really need to use the Internet

  Settings > more > internet settings > accept

  to enter them manually, google "android apn settings __name of your network___.

  settings > more > mobile networks > access point names > more