Can I determine which forces a user logoff?

If a user chooses to force disconnect another user in the Task Manager, I found in the event viewer?  I tried without success.

Thank you

I have not tested, but I suspect that the event is logged if you enable auditing in Group Policy Editor (gpedit.msc).

Tags: Windows

Similar Questions

  • I was looking in my information system; software environment; system drivers and I noticed that many have stopped status. How can I determine which are to be started? How can I start them?

    I was looking in my information system; software environment; system drivers and I noticed that many have stopped status.  How can I determine which are to be started?  How can I start them?

    Hello

    · Do you see a problem with your computer?

    You can check the links which has more information on the information system: Description of Windows XP system information (Msinfo32.exe) tool: http://support.microsoft.com/kb/308549

  • What is the best way to determine which line a user has clicked on a link?

    Hello. Question no doubt simple, but my googleing fails me. I have a table with a column that is a command link. How can I determine which row was clicked on? I need to take this value and to move to another page to link it to a different query. I thought to establish the result in a session bean? Or is there a better way?

    Thank you!

    Hello

    You have two options:

    1. (complex) have your ActionListener evaluate the event to get the source, then climb the tree of components up to the table and get the data of the current line;
    2 (single) add a setPropertyActionListener in relation to the value = "#{var}" target = "#{destination}" where var is the value of the attribute of the var and destination table is your bean managed requiring the line clicked.

    Kind regards

    ~ Simon

  • How can I determine which had launched a particular service?

    Hello guys:
    I was checking the services of Windows 7 and saw that just the computer turns and there are services began.
    Obviously, if the service is set to automatic start, this behavior is expected. But if it is set to start manual (on request), should be a service or application that has begun. Sometimes, which could explain the dependencies, more precisely in the box that says: "the following system components depend on this service. But what happens if this box is empty.
    My question is, how do I determine the service or the responsible application to launch a service to manual start?
    Best regards.

    How can I determine the service or the responsible application to launch a service to manual start?


    One obvious answer is to disable and observed effect. However, I am usually warning against changing services default start settings, because it tends to cause system error. Users often do to improve the performance of the system, but it will normally do for negligible improvement and often be likely to result in a decrease in system performance.

  • How can identify us which office a user will receive in a persistent pool?

    In our company, we go through a large implementation of virtual machines. Here are our current deployment process:

    1. Quick Clone devices of a model to measure determined by the business line

    2. Create a persistent area in Manager view but do not add devices

    3. Additional full customization to devices according to the needs (software extra, settings, etc.)

    4. Data migration from the employee of their physical box to their new virtual machine

    5. Add their designated VM pool persistent and to connect immediately to ensure that they are awarded.

    As you can see we are not using and app virtualization or profile management utilities. It is therefore important that our users get a specific device. What we would like to be able to do is all the additional configuration at the front and add all devices in the pool from the beginning and somehow indicate which device each user will receive instead of having to add the devices one by one to the persistent pool.

    Any thoughts?

    Sorry, you can find the console from that.  It is vdmadmin.exe and it is on the broker for connections.

    http://www.VMware.com/PDF/viewmanager_cl_tool.PDF

    If you have found this device or any other useful post please consider the use of buttons useful/correct to award points

    Twitter: http://twitter.com/mittim12

  • How can I determine which applications and processes are turned on at first upward and how can I keep their autostart?

    My office of gateway using Windows XP takes a long time to start.  I hear a lot of activity because it starts and after a very long time, I can really use it.  I would like to know what process or applications start automatically and then determine which ones to move away and how.

    If you were to Google something like:

    XP boot manager

    You will get hits with links to managers of free starter like this simple:

    http://www.MLIN.NET/StartupCPL.shtml

    Another popular and free tool with a built-in startup manager (and other interesting things) are CCleaner which you can download here:
    http://www.Piriform.com/CCleaner

    CCleaner allows you to manage most of the startup items and also do some other operations oriented cleaning.  Some people will you recommend is not to use the registry functions in CCleaner to avoid these features for now.  I have no problem with it for me, but sometimes it's a contentious issue, I prefer to avoid as much as possible!

    You can uninstall CCleaner later if you don't like it.

    You can disable the startup items, see how things look and if you want - you just delete them (or leave it off).

    After launch of CCleaner and see what startup items you can disable/remove, if you are still not sure of your startup items, follow these steps:

    Run CCleaner and choose Tools, boot and bottom right, click on the button "Save to text file" to save the startup information in a text - something like startup.txt file

    Save the boot information text file on your desktop (or somewhere you can find it) open the text file with an editor (Notepad or WordPad), select all (Ctrl-A), copy text, all the text selected in the Windows Clipboard (Ctrl-C) and then paste (Ctrl + V) the contents of the startup list to come back here in your next reply and maybe someone can tell you another thing to consider.

    A more revealing startup Analyzer is Autoruns which will allow the manipulation of all sectors of boot and does not actually install anything:
    http://TechNet.Microsoft.com/en-us/sysinternals/bb963902.aspx

    I have zero startup items on my computer, so none of this is important to me!

  • How can I determine which commands are associated with private 2-14

    I don't want to create command authorization sets just used a private level. I can't determine what commands are assigned to what level priv?

    By default, there are three levels of command on the router:

    privilege level 0 — includes orders to disable, enable, exit, help and logout.

    privilege level 1 - Normal level on Telnet; includes all commands on the router user level > prompt.

    privilege level 15 - includes all orders enable-level at the router prompt #.

    Orders at level 2-14 are empty by default, BUT you can always access all orders at your level and below, so if you are level 4 you have access to the commands at levels 0 and 1

    Hope that helps, rate, if

  • How can I determine which item in a table was just clicked on?

    I have a table set in place on my front. When user right click on an item in this table, I would like to be able choose among 3 different options. I have the shortcut menu works, but I need to know what element of the array of the user in a click with the right button to determine what values to change. How can I get the index of the item?

    Thanks for any help!

    https://decibel.NI.com/content/docs/doc-6406

  • How can you determine who is a user Professional license employee user vs.

    Currently looking for add a new business to our group and we want to know how to determine the license we have and what to ask for the new company.  Is there a query that can be executed or a report that can be run and determines the license we have?

    We have installed the following modules. HR self-service, GL, AP, purchase, purchasing.

    Dave

    Dave,

    Please contact your Oracle account manager, it is best to meet licensing issues.

    World prices and licenses

    Thank you

    Hussein

  • How can I determine which is selected in a report and form the appication

    I have the need to choose what is selected, for example the primary key that is selected in the first form.
    Thank you
    Doug

    Hello

    I think this can be done using a "sweater in the region." Take a look on: [http://apex.oracle.com/pls/otn/f?p=48982:1] sorting on the second page won't work, but otherwise you get a copy of the report from page 1 exactly as the user he had before clicking on the link for an article.

    Andy

  • How can I determine which Intel SSD is compatible with my MacBook PRo mid-2012?

    I have a MacBook Pro 13 inch Mid 2012 (not retina) and I need to upgrade my hard drive to an SSD. I've seen several like Intel s 540 and 750 series and a Crucial MX SSD. However, I am trying to identify the one which would be compatible and the best alternative for my upgrade. I appreciate the help. Thank you.

    SSD:

    MX200 essential 500 GB SATA 6 GB/s 2.5 "

    Intel SSD 540 s series 480GB 2.5 "SATA 6 Gb/s, 16nm, TLC

    Intel SSD 750 series (400 GB 1/2 height PCle 3.0, 20nm, MLC)

    Your Mac has a SATA interface, so the PCIe model is not compatible, I would choose most of the three.

  • How can I determine which profile is currently using Firefox 3?

    I have 4 profiles in my file C:\Documents and Settings\ral\Application Data\Mozilla\Firefox\Profiles\. I think that Firefox opens with eepi9w6m.b117. How will I know?

    "I could use C:\Program Files\Mozilla Firefox\firefox.exe" - ProfileManager
    If I knew how, so he invite - howto uncheck the "open without asking" without being able to open the dialog box that contains it.

    Tag: profile, current profile

    To find which profile you use ' ...

    • Help-> Trouble Shooting Information-> 'open containing folder '.
    • or directly by typing on: support then 'Open containing folder'.

    The file name of the file contains the name of the profile

    A directory to the top of your current profile are all your profile folders

    Other references:

  • How can I determine which key is which product?

    Combining what product key code which

    I wrote about 27 keycodes on a Notepad. About 2 years later, now I want to reinstall XP Pro. The problem is that I have keycodes for vista home, xp pro and about 20 keys xp home. Now, for some stupid reason, at the time I thought that any key would work for any version (because there is no code bit like using uniblue to set which of their codes were for what product for example, rb RB-XXXXX-XXXXX-XXXXX-XXXXX telling me its for registry booster) I was wondering if there is a way to know which key is for which operating system (OEM retail (, Home, pro, full, Xp, vista etc)

    In my opinion, Windows needs to release fewer versions of its software.

    Unfortunately not.

  • OfficeJet Pro 8600 N911a: How can I determine which cartridge needs to be replaced?

    I installed an update to Windows Pro 10.  Now, I can't say what ink cartridges need to be replaced.   What happened to the apps that gave me the ink level?

    Hello

    Same software offered fow Windows 10.

    What are the results when you try to launch the HP Officejet Pro 8600 application?

    In addition, you can check the level of ink on the screen of porinter as shown below:

    http://support.HP.com/us-en/product/HP-OfficeJet-Pro-8600-e-all-in-one-printer-series---N9/4322914/model/4323658/document/c02876509/

  • How can I determine which programs need to run when I start my computer?

    When I start my computer there are so many programs that start running. How will I know that I should really run? Can someone advise me please on this issue?

    It seems that I have to add to my previous post that it is best to start to remove the start up programs a little at a time and try to do it with the programs, you know what they are.  Are some of the things that I try to remove Quicken, MS Office, programs that play music (for example Winamp & Real player), anything from Adobe.  Things I leave usually in (in addition to my software antivirus of course) are hardware related like my touchpad, video and audio, and my CD/DVD stuff that needs to be there when I want to burn discs.  This isn't an exhaustive list, but hopefully you get the idea.

    Generally when making changes, change a little at a time to ensure that you do not have messed something up.  Run for awhile, and then if everything seems OK, do more than a few changes if necessary.  In this way, if something goes wrong, it's much easier to find the problem.

    I hope everything says what I have failed to mention in my previous post.

Maybe you are looking for