Can I get several variables defined by the user in a slide?

I used the variables defined by the user in the past to collect information on the results of the quiz, as well as for the certificate of quiz.  I would like to re - use variables in a few areas.  in my project, a slide invites you the user name (variable, I created), second will prompt you for the user ID (variable, I created).  I would like a third screen that reads 'Confirm your previous entries', and I want to show him the two variables.  I see only one.  Is it possible to get them both to display?

I also want to re - use both in the quiz at the end certificate.  If I change the certificate in Flash widget, will be the two variable display?

This quiz brings to me by email (we have no LMS).

Any suggestions?

Cyndi Nagel

Hi again

You reduce the screen shot before you download? You are right. It's barely legible.

If the variables are inserted into more than a legend, double have you checked the timing? Maybe something is pause the slide before one of the legends has a chance to appear.

See you soon... Rick

Useful and practical links

Tags: Adobe Captivate

Similar Questions

  • Sharing Variables defined by the user through projects

    Hello

    I wonder if it is possible to share Variables defined by the user between projects. What I have in mind, is that I would like to have my user defined Variables configured in a central location and then insert them into my projects as variables bound so that they update automatically when I change their values. For example, I define a variable named ProductVersion , that has the value 9. Then I insert this variable in all my projects as a bound variable. After 2 months the product version changes was 10, so I change the value of the variable at 10 to the place where it is stored and it is automatically updated in all projects. Is it possible somehow? I'm new to RoboHelp and I find no answer. I tried the solution for a while using the product on the Internet without success. I even contacted Adobe Support and they redirect me to this forum I used help and manual before and how they deal with user variables was quite simple.

    Hello

    Unfortunately RoboHelp does not offer a way to let this, at least, is not directly.

    However, I think I found a way to get there, the variables are stored in a file named rhvariable.apj. So what you could do is to add this file as a file of luggage to each of your projects that will share variables.

    Now, you would create a shared location, but also a new category in your resource manager. This will create a common location to store the file apj.

    Add the file of baggage to the location. Repeat for all the projects that share variables.

    Now, when the variable is changed in any of the project participants, it should be to update the shared location and you can achieve the goal.

    Note, however, that although you'll get what you want, it will be always open each of the participating projects, synchronize the APJ file and generate the output in order to to refresh all. No way, I am aware of escape that.

    Cheers, Rick

  • FPGA target 9146 OR editions variable defined by the user to a network

    I am developing code to use on the expansion chassis NI 9146 ethernet with 3 hanging modules, NI 9205, NI 9264 and NI 9476.

    The code is supposed to be downloaded on the chassis as FPGA code and run the code itself and the release of information on the network for the chassis, it is hanging in.  The code is simple (blood pressure measurement and convert them to pressure).

    When the code is on the host pc, it can be run through the target and runs correctly.  The pieces are just have thing chassis user FPGA 1 LED blink a few times per second, convert the voltage in pressure and variable output on the network and read some Boolean variables that are on the network.  All variables are not listed in the network in this way (by pressing the button run an FPGA VI compiled host) by pressing

    When the FPGA VI is downloaded to the flash memory chassis, configured to run once downloaded and restarting the device, the VI FPGA runs, because user FPGA 1 LED flashes on the specifided rate in the code, but variables do not put on the network.

    Attached are several screenshots of the code window and screen project.

    Thank you for your time

    Mitchell

    Hello

    The FPGA cannot write to the variables by itself.  It is usually used to make a task of high speed.  In order to communicate with a host computer, you will need the code running on the controller that uses screws FPGA Interface.

  • How can I get automatic fill-in of the user name and password?

    It is similar but different from my previous question. On a computer when I open Firefox it opens automatically log me in my homepage (a Yahoo mail account). When I open a new tab in my gmail login happens with my already filled username. All I have to do is click NEXT and it goes to the login with my password information page. I can't get firefox my my other computer to do this. My homepage comes up with my informed user name, but I have to manually go through the login process. When I open gmail in a new tab, I can't do anything except: 1. press ENTER and get an error message, and then click in the user name box, or 2. Re - click the gmail to re - open the tab. Once I did this the page comes with connection two names - the strange correct one and a few. (I've not been able to get rid of the weird name, either). I would like to be able to fix things, so Firefox will do the same thing on this computer as it does on the other.

    Someone at - it suggestions?

    A detail as a website to remember you (automatically log you) is stored in a cookie.

    You can use these steps to make a Web site recognize and remember you:

    • Create a cookie 'allow' except to keep these cookies, in particular in the case of secure websites and when the cookies expire when Firefox is closed.
    • Tools > Options > privacy > "Use the custom settings for history" > Cookies: Exceptions

    You can delete cookies for a Web site to make the site forget about you.

  • Win Vista Business 32-bit SP2 running: How can I get IE 8 to keep the user ID and PG for the sites?

    I'm under IE 8.0.6001.19019, with privileges for the Admin user, and I was not abe to understand why, unlike my other portable installation Win 7 SP1, as IE 8, I can't get the system to keep the user (not to mention passwords) ID I enter the website screens, for example: as my web Yahoo email account.  I have been through all the IE Tools / Internet options screens to see what I can and can't seem to find something there.

    Any thoughts?

    Block you cookies by moving the slider on the Privacy tab to the top or to a site from the list which is accessed through the Sites button. If this isn't your problem.

    If I remember well AVG Free scan deletes the cookies in a default scan. But it should be limited to tracking cookies.

    I'm not familiar with HotSpot Shield.

    You run like CCleaner cleaning software that deletes cookies?

    Apart from that, I am ideas. You could try to run without addons (type Internet Explorer in the area start search and select the no addons version) and see if this behavior persists.

    Just to clarify, the data is available if you navigate away from the site, then come back to open a session? Or is it only after close Internet explore and restart?

  • Can not get category, group, object of the user using CustomRecordTypeReadAll

    By setting the Inclure_tout to true, I get a lot of record types after calling the CustomRecordTypeReadAll web service, but there is no object category, users and groups.
    Someone knows why? Thanks in advance!

    I ran into this and similar items before. I never asked for a formal response, but it seems that the items that you cannot change in the CRM On Demand admin interface are not included in queries like CustomRecordTypeReadAll. For example, I don't think that you can rename the user object in the CRM On Demand, so the value is returned in CustomRecordTypeReadAll.

  • ICC 2.0 variables defined by the user and the content of the DB

    Is there a reasonable documentation that describes the way in which variables are mapped in the database. With the current level of documentation, it is quite difficult to write model CLI scripts based on the characteristics of the device (such as the description of the interface etc...).

    / Mikko

    Unfortunately, the content on the extraction of the database and the API is very minimal.

    You can access the API of your own device information using this link:

    https://your address -ip/webacs/api/v1 /.

    Or download the Cisco reference Guide first Infrastructure 2.0 API here:

    http://www.Cisco.com/en/us/docs/net_mgmt/Prime/infrastructure/2.0/APIRef/pi-2.0.zip

    -Thank you
    Vinod
    *Side encourages contributors and it's really free. **

  • Variables, FPGA, defined by the user and SoftMotion 2012 + NOR 9505

    Hello

    To http://forums.ni.com/t5/Motion-Control-and-Motor-Drives/Softmotion-and-NI-950X-Module-Compatibility/... Nathan says:

    NathanK wrote:

    The glue code that connects Softmotion on FPGA LV code RT is called 'the axis interface. The version of the interface of the 2011 Softmotion axis necessary creation screw RT that exposes certain capabilities to Softmotion.

    ....

    Improvements have been made in 2012 Softmotion who has removed the requirement to write RT live. Disclosure for the FPGA happens rather on the Variables (UDVs) user-defined. It is also possible to create a kind of axis 9501 for configuration of the module as well as an axis UDV generic for other completely custom 950 x modules or axes. It is not a specific example for the 9505 yet.

    This caught my attention, as I'm trying to develop a system using LabVIEW SoftMotion 2012 and the NI 9505. I'm curious to see if there are alternative methods to write my application.

    Where can I find more information on this 'generic UDV axis' and how to implement a? Nathan says "is not a specific example for the 9505 yet", but there are examples for the other modules - how similar/different are these modules from the 9505, and it involves a lot of effort to bring examples of the 9505?

    Thank you!

    Hi JKSH,

    I have some relevant information that it is request that may be useful:

    Working with Axes Variable defined by the user (NI SoftMotion Module)

    Resource binding dialog box (NI SoftMotion)

    Configuration OR SoftMotion Axes (OR SoftMotion Module)

    Example that mentions of Nathan is the drive Stepper (9501) .lvproj (material Input and Output"Motion Control" NI SoftMotion"Device Specific" NI 950 x"OR 9501), I would take a peek at this on use of the UDVs.

  • defined by the user is not displayed correctly the variables

    Hello, I use the variables defined by the user in Adobe Captivate 9. I am having the users to enter text in a text box entry, then view their entry on another slide. When I test the project the user defined variable displays only partially what I have typed in the text entry box. Someone at - it solutions?

    You must do so via the properties panel.

    See you soon... Rick

  • I did several back ups on my computer and I wonder how many of the discs that I have to hold. Can I get rid of all except the last backup?

    I did several back ups on my computer and I wonder how many of the discs that I have to hold. Can I get rid of all except the last backup?

    Thank you

    Scott

    Hi Scott,.

    You must keep all 10 backup.the disk new backups will contain only the last backups and will not have the previous backups.

  • Functions defined by the user with several parameters

    I set features three following user using "Define."

    UF1 takes a single patameter;

    UF2 takes two parameters;

    and UFX takes two parameters - with the second is 'X' in the definition.

    Œuvres F1.  F2 is the EVAL of F1 version and it works too.  User functions only seem to work fine.

    F3, a function of two user settings, produces a graph of NaN.

    F4 is the EVAL of F3 version.  Note that 'B 'is not replaced by 1'.  Also produces a NaN chart.

    F5 produces a graph of NaN.

    F6 is EVAL of F5.  The 'X' is not replaced (even with the ' B' above), and even if it looks like 'X * X', it also produces a graph of NaN.

    Is it possible to get defined by the user, with several parameters, features work by tracing the curve?

    Hi!, Fortin:

    If you download and install the ultimate Firmware with the version of the software: 2015 6 17 (8151), with the number of Version: 1.1.2 - 11, you can trace your examples of definition of the function, with curves and values, without NaN.

  • notification area: How can I get my internet connection and the life of the battery and its return in the notification area

    How can I get my internet connection and the life of the battery and its return in the notification area

    on the bottom right of my screen?

    I tried the properties and to add notifications but it net let me add them...

    Hello

    1 Please reboot nothing so interfere with this process.

    Click with the right button on Taskbar - Properties - tab Notification area - check box Volume - if it is grayed out
    Then, use this link. (The battery is the same method.)

    How to enable or disable the system tray in Vista icons (there are several methods
    and you can to use them all).
    http://www.Vistax64.com/tutorials/106787-notification-area-system-icons.html

    If necessary: a Mr Fixit

    System icons do not appear in the notification area in Windows Vista or in Windows 7 until you
    Restart the computer
    http://support.Microsoft.com/default.aspx/KB/945011

    I hope this helps.

    Rob Brown - MS MVP - Windows Desktop Experience: Bike - Mark Twain said it right.

  • I can save is no longer shades defined by the user.

    It's something I've done many times:

    -create objects with the fill color > select > add the color group to illustration selected in the swatches Panel > click the menu library swatch in the swatches Panel and select "Save the nuances" in the drop-

    This would normally take me to the exact location where I need to record a sample, defined by the user - something like: (user defined) / Library/Application Support/Adobe/Adobe Illustrator (version) /(defined language)/samples. I can see this site for a fraction of a second, before the file browser window switches back me on the directory of the user. The library is open is no longer in this dialog box.

    I run two versions of Illustrator - CC and CS5 and oddly, it is the case in both, so I think the problem is Adobe - of - rights of library. I use a Mac, running OS X Yosemite 10.10.5.

    To be clear, I did several times in the past and it worked. And I tried to restart the computer.

    Any help/advice are welcome

    OK, I solved the problem by chance, and I'll leave the solution here if someone has the same problem.

    Namely, my Finder browser "save the file" has been on "Sort by date", and this mode will not access library. I went to "sort by name", and the library with user-defined shades reappeared. (Do not know what is the logic of this, but there you go).

    -Ana

  • How can I get FireFox to work on the first Google ChromeBook addition? He repeats to me upgrade and when I do it says does not support?

    How can I get FireFox to work on the first version of the Google ChromeBook? Everytime I open it it said to update or upgrade to FireFox and make it your main page. So I downloaded it and it's open once it is installed, but then a message appears that says "can't stand" search for an application that supports FireFox and its software, or something of the sort. I was sitting here with a full battery when I started and now it is dead... and I still don't have FireFox on my ChromeBook.

    What do I do now or how do I get it to work? And if it just simply won't work on a CHromeBook then they need to have that riht out in the open.
    

    Hello

    I had a peek in this and was informed that Firefox does not work on Chrome OS.

    It is designed and done a little differently from the likes of Windows and Linux and will not support another browser being installed.

  • How can I get a new category in the list?

    I have included a number of events of the churches, using the calendar in Thunderbird, but whenever I have to add 'Church' as a new category, even if I already added. How can I get a new category in the list? It might also be useful to be able to get rid of the categories that I'm probably not want. Is this possible?

    When you add the new category?
    If added to the event entry so it is an addition of time.
    You go to Options-calendar-categories and add is there to be a permanent choice. There is also a button to delete it.

Maybe you are looking for

  • Question HDMI on Qosmio F60-111

    Hi all I have a strange problem with my computer laptop HDMI port. I searched a lot, read the operating instructions, tried all the solutions available online and was not able to solve the problem. I have connected the HDMI cable between the laptop a

  • Unwanted Vongo software installation

    I have a HP dv6000 with Windows XP. I tried to uninstall a program called Vongo come included. Somehow, I did something wrong, the kidnapping was messed up and if I try again, I get an error message. When I start my Windows logon, Windows tries to in

  • What should I do to read pdf and jpeg files?

    What should I do to read pdf and jpeg files? I used to be able to see these files, but now I can't! all the ideas will help. Thank you

  • several intermittent BSOD on a Dell laptop

    I have few users with a particular model of Dell. They all know BSOD for a few days now. All drivers have been updated as much as I could see. I have looked at the dump files, but could not find any useful info in it. I posted a few files dump of a c

  • Images jerky on pc brand new.

    Hello everyone,I've been editing in first for about a year now on my macbook, but I recently built a pc brand new that works on windows.When I installed the first and I imported my images from g-d 70 canon, I noticed in reading on the timeline of the