Can I install a CD/DVD burner on my nc6220 O S XP PRO

My driver is not able to burn, I was wondering if there is a download of burner I can get?

Download?  N °

Buy a player capable of writing CD/DVD/etc and then you can use it for such things (with WIndows XP, you will need third-party software to write in some formats.)

Tags: Windows

Similar Questions

  • Can I install a Philips DVD R/RW drive (DVD8801/96; 9305 046 68096) on my HP Pavilion p6720f desktop computer

    I have windows 7, AMD Phenom he's 840t Quad Core with a dvd burner as the top super multi drive on my HP Pavilion p6720f desktop computer. Can I install a Philips DVD R/RW drive (DVD8801/96; 68096 046 9305) as my second drive burner?

    jherbie77,

    Are you sure of that model #?  I found it listed hereandhere as a PATA/IDE hard drive. Not a good choice!

    That being said, here are my suggestions.

    You need an internal Sata DVD + RW (there be DL mode) and the necessary cabling. Power supply not having a spare power cord Sata, but it wil have the molex 4 pin. You also need a Sata data cable.

    Player $18.99

    cable selection:

    just a data cable, you have found a power cord Sata 15 pin $2.99

    just a power and data in the drop-down list $3.99

  • Can activate a Satellite L40 DVD burner

    I recently bought a Satellite L40 (Vista Home) which came with a Pioneer DVD burner. The problem I have is that the player is currently disabled and that any attempt to activate the device fails.

    Can someone advise a solution because I can't use the drive as it is?
    Thanks in advance.

    What exactly do you mean by saying that the player is currently disabled?

    Have you checked the Device Manager and the status of the CD/DVD driver?
    Do you see yellow exclamation points?

    However, no matter if a yellow exclamation point appears or not, you should try to remove the CD/DVD drive device manager and must restart the laptop.
    Finally, the Windows operating system should recognize a new device and should reinstall the CD/DVD drive.

    Hope this short procedure will help you get the job of CD/DVD drive.

    I appreciate feedback ;) cheers

  • I want my installed with computer DVD burner to work by writing on DVD.

    DVD - RW driver is not written on the DVD but writes on CD, no error code is given, I have NERO 10 installed on my computer. I have an external burner installed also, but that burns both DVD and CD on its own. Anais fine E

    Hello

    . Check if the DVD recorder is recongised in windows explore?

    . If it works much earlier?

    I suggest you to follow the below mentioned article:

    http://support.Microsoft.com/kb/982116

    Hope the helps of information. Please post back and we do know.

  • Can I install Adobe DC 14.99 subscription to my two laptops (macbook pro and PC) because I never use them at the same time and its only for me?

    Can I install adobe DC on both my laptop since I was the only person who will use the program? I pay 14.99 and realized its more for multiple users, but I'm just a user wishing to access on my two computers.

    Hi Joel,

    Yes, you can install Acrobat DC on both computers.

    According to the "end user license agreement" (EULA), a single usable subscription end user on up to 2 computers in any instance.

    Kind regards
    Rave

  • I can't install the external DVD drive windows

    My laptop CD/DVD drive is damaged and unusable. I bought an external drive. I tried in vain to reinstall windows by putting my installation in the new external DVD/CD drive disc, connecting to the computer with the USB cable supplied with the player. BIOS Boot sequence first to the value "CD/DVD/CD-RW' and other devices (device USB storage, internal HARD drive, floppy drive and integrated NIC) were not marked to start." When I restarted the computer a message "no bootable... devices. "came. Same message came when I tried again with the first initialization of parameter on "USB storage device. I tried other options and means, I could think of, but could not install a fresh copy of Windows. My drive is good and works normally. Is there a way I can install new Windows on my computer, USB key or drive external hard external HD or DVD/CD drive?

    Ooops! -Sorry - in this case...

    http://wiki.EeeUser.com/windowsxpusb

    can help

  • How can I replace my original dvd burner in a desktop gateway computer?

    I removed the original burner and replaced with a refurbished and guaranteed burner, now the new and the old are not recognized by the computer, help?

    Hello

    Your, try running the DIFFICULTY mentioned in the following link and check.

    Your CD or DVD drive cannot read or write media

  • HP DVD1260I DVD burner

    Cannot install HP 1260i DVD burner. Windows 7 Ultimate Code 10... tried all the usual bugs to no avail... of ideas please?

    Try following the steps under "Windows 7 or Windows Vista" in the MS KB article:

    http://support.Microsoft.com/kb/982116

    These measures, to remove the UpperFilters and LowerFilters, values if they exist, in the registry key named can help.

    Create a System Restore Point beforehand and restart the computer later.

  • For Windows DVD burner 8

    Just got a new computer with Windows 8. Unfortunately discovered the window of Windows 7 DVD writer disappeared. (Data disc, burning on Windows Media Player is not useful) I do home movies, photo slideshows and have no way to burn them. (So that they can play on a DVD player) I don't know what they were thinking when they took the engraver of DVD of Windows 8, because I would be more then happy to pay for it!

    Since it no longer exists, but is - anyone out there found any good software? I'm looking for something simple, preferably $100 or less. I bought a DVD Creator software to date and it has been a NIGHTMARE!

    Some people have suggested DVDStyler, a little wary of free downloads. Or I've tasted Wondershare, but I'm also a bit wary of compensation for the more than downloads. (-:

    Warning or suggestions would be greatly appreciated!

    Hello

    I suggest you to check in store Windows that there is some DVD burning software are available.

    Check out the link,

    http://Windows.Microsoft.com/en-in/Windows-8/Windows-store#1TC=T1

    Also, use your favorite web browser and install the free DVD burning software.

    With the help of third-party software or a link, including hardware drivers can cause serious problems that may prevent your computer from starting properly. Microsoft cannot guarantee that problems resulting from the use of third party software or link can be resolved. Using third-party software or a link is at your own risk.

    Warning: Using third-party software, including hardware drivers can cause serious problems that may prevent your computer from starting properly. Microsoft cannot guarantee that problems resulting from the use of third-party software can be solved. Software using third party is at your own risk.

    If you need help with Windows, please let us know we will be happy to help you.

  • Looking for DVD Burner for Optiplex GX260

    I have an Optiplex GX260 that has been brought to me for upgrades. Currently, it is a P4 2.4 Ghz/512 MB, 60 GB with a CD-Rom drive. They want a DVD burner installed. I was not able to find out if the GX260 can use the same internal DVD burner which uses a gx270s. Dell does not show an available update. I would like to have some information I can get on it. Thanx


  • Portege A100 - problems recognizing a new DVD burner

    Hello

    I'm looking to replace the Panasonic/Matsu * player UJDA750 combo with a LiteOn SOSW - 852S DVD burner. The LiteOn is CSEL and is not recognized by the Portege A100. I tried to change the master/slave/CSEL and Inverse CSEL using E2MS_WIN_SOSW - 852 S .exe (in an Acer Travelmate 220, which sees all configurations), but the Portege A100 still does not recognize LiteOn.

    I ran IDEDIAG using a WinME boot CD and the Matsu * a Combo drive in Portege reports as secondary master. So, I tried flashing the drive LiteOn (using the Acer Travelmate platform) with MTKFlash version 183 c using the a command? "mtkflash 3 w/b PRS9.bin" (using the original firmware of saved), '3' to change the drive to the secondary master. I came across problems here - the flash appears to hang. The drive is always ok, however. I flashed it back to the original ok CSEL using E2MS program in Acer.

    I have not tried bridging the pins 45 to 47 on the LiteOn - I thought maybe it was a last resort.
    -Can help you with the correct configuration for a CD/DVD drive in the Portege A100? There are a bunch of different ones - primary, secondary, tertiary, Quarternary master/slave and CSEL and Inverse CSEL. Portege A100 'sees' the Matsu * a CDROM model CR-176_B of Acer.

    Or - can you recommend me a DVD burner for this laptop?

    Hello

    The evolution of the master/slave/c-salt settings is not recommended and tell the truth I put t know if its possible. I presume that it of not possible to Flash these settings on medium power.
    In my opinion it doesn't make any sense to do.
    This procedure may damage the drive. Maybe you will not be able to use this drive more and more you will void the warranty!

    I think it s better to buy a compatible device and supported as trying to drive not compatible flash.

    Did you check your user manual? Usually the user manual should provide information on compatible CD/DVD players and supported.

    Good bye

  • video DVD burner

    How can I get a video dvd burner and where

    Hello

    The article below should answer your questions.

    http://www.Microsoft.com/windowsxp/using/MovieMaker/expert/jones_02november25.mspx

    In the event that you are specifically looking for a third-party software, I suggest that you search using your search engine.

    WARNING OF THIRD PARTY
    Using third-party software, including hardware drivers can cause serious problems that may prevent your computer from starting properly. Microsoft cannot guarantee that problems resulting from the use of third-party software can be solved. Software using third party is at your own risk.

  • Portege 3490CT - I can't install XP using the USB dvd burner

    Hello

    I can't install Windows XP Home edition. I have USB-DVD writer and also an external recorder Toshiba on PCMCIA (CPI 5025a Toshiba) but he couldn t find any external recorder.

    I remove the HARD drive and format the extern in 2 parts.
    I first install BACK and copy the files of Windows XP Home edition on the second part, but I could also install it because of the conflict of the FAT and NTFS t. In the BIOS, I chose cardbus-16 bit. My CD burner works (tested before).

    Please help to install Windows on my laptop.

    You cannot install Windows XP directly because there is no driver for the external optical drive to build.

    Mainly, you're on the right track.
    Format the HARD drive, make two partitions the two FAT32.
    Copy the folder I386 from your CD to install XP on the second partition.
    Start the installation calling winnt.exe.
    Install XP on the partition of frist.
    After the installation is complete, you can use the XP "convert.exe" command to change FAT32 to NTFS partitions. Run "convert.exe /?' in a DOS window to get the correct settings."

  • install dvd burner lightscribe Pavilion in my HPEnvy Phoenix

    How can I install burner lightscribe dvd supermulti/cd of drivers of my old HP Pavilion a6500f to my new pc to HPEnvy Phoenix 810 - 150se dt

    Hello

    The Lightscrbe in your old PC Player uses a SATA connection by the HP documentation.  These HP published instructionswill show you how to add a second optical drive. Look for the extra power connector near the existing optical drive.  You will need to buy a SATA data cable and then plug it into an empty SATA port on the system board.  Use one of the empty SATA 3 Gb/s ports. See the image below.   You can consider wearing a latex medium weight glove to avoid scratches and cuts on the hands.

    The last issue is to install the LightScribe system software.  Try to reinstall underlying lightscribe systembefore installing your burning software.  In addition, you will need an application that will support Lightscribe.  Burning CD/DVD from Cyberlink or Roxio applications should support optical drives Lightscribe.

  • Tecra 8200: Strange question if I try to install a DVD BURNER

    I have a Tecra 8200, Pentium III 750 mhz, 256 MB Ram, 60 GB hard drive.

    I buyed a new DVD player, especially a double layer RECORDER of DVD TOSHIBA SD-R6472 SLIMLINE 8 x DVD - RW for laptop in the CAR.

    I installed it on my totebook and this drive seems to be not recognized Windows XP (with service Pack 2).

    When I put on my laptop and start the boot Tecra 8200, the led of the DRIVE to continue but when starts to load windows xp this leads coming out and when the sistem of start of windows do not recognize ENGRAVER of DVD;

    Is there a method to recognize-DVD BURNER to windows, and I have to start looking for plug-and-play, after I have remove and replace the DVD burner.
    If I use this way to recognize the work of good DVD and Windows XP and everything works fine.

    The problem is that I do all this action to use this DVD burner.

    I try to install the other two-dvd burner but y at - it the same problem: windows don't recognize they must use my singolar procedure to use they; I try to update my bios to the latest version available and to update firmware of dvd writer but never.

    I ask a real help to those who can provide help for me.

    Thank you all!
    Grazie a tutti! :)

    CIAO

    Italy Dario

    Hello Dario

    Well, first of all, you must check the BIOS settings. As far as I know the configuration of the device must be set to the OS installer.
    Then it s advisable to reinstall the operating system. In this case, you must use the CD recovery or the original version of Microsoft Windows. All the necessary drivers, which you can download from the Toshiba site

    Good bye

Maybe you are looking for

  • 2014 MBP crashes when the external drive connected

    MBP 2014 15 "El Capitan running. Connected crush 3 TB Seagate GoFlex Desktop drive. When I connect, drive starts, is recognized by Finder but the system locks and then hangs and then almost immediately. Was OK until I tried to transfer a large file o

  • computer connect laptop tv turns off the color scheme

    original title: computer connect laptop tv When I connect my laptop to a plasma tv via the vga cord input, the color on the TV set is switched off. I have used other vga cables and it hooked up to TVs and it is always. the color is fine on pc and tv

  • The intermittent bios password problems

    I have a HP Pavilion DV9000 Notebook/entertainment (GL885UA #ABL) and intermittently rejects the startup password. There is a USB keyboard and a mouse attached separately. The BIOS is displayed as HP F.3D, 22/11/2007. Processor is AMD Turion 64 X 2.

  • I have 13 updates to visual c ++ 2005 SP1 KB2538242

    I get updates of visual C ++ 2005 service pack 1 for the last three days. Restart the computer after installation and when I reboot there is another update of the same type. all the updates install. How many updates are there.

  • Photosmart 8450: "Device Setup doesn't have all the.

    HP dear Forum and Support: My HP Photosmart 8450 fails to install on my Dell laptop. Help, please. I have a Dell Inspiron 640 m laptop computer with Windows XP. I got the printer installed fine, but then I caught a bad virus had to restore my laptop