Can I install ConfigFree on satellite Pro 6100?

Similar Questions

• Can I install WXO on Satellite Pro L300-22N?

  Hello

  I have a question:

  Can I install win xp pro / Home on Satellite Pro L300-22N? It has Vista Home Premium on it now and I don't like this system, I wonder if it supports win xp.

  Please I need to know the fast awser.

  Concerning
  HFH-Dataservice

  Hello

  Of course, you can install Win XP why you think that you can not install Win XP?
  If the laptop is able to run Vista installation Win XP shouldn't be a problem.

  See European driver of Toshiba.
  You can find some Win XP drivers too

  PS: before install you Win XP, you must create the recovery disk!

  See you soon

• New on Satellite Pro 6100 WLAN card installed, but can not be activated

  Hi, just replaced the internal Wireless LAN card on my laptop Satellite Pro 6100. Map of yesterday and today have the same problem: I can't turn them on. They are installed properly and supposed to run in what concerns the XP drivers, but does not detect wireless network andy saying it is "disabled".

  I tried upgrading to the latest version of BIOS
  I reinstalled the latest drivers
  Toshiba network device switch sees only the Intel Pro/100 VE wired, network card, but not the card the Intel Pro/Wireless 2200BG.
  Direct activation of the Wireles does not produce a said connection disable, enable, trying to connect, but it fails, as if he did not see the network.

  Past and present, wireless card fail to see any network.

  Martin

  Hello Martin

  This model of laptop is quite old and at that time 2200 card was not on the market. I can imagine that there is a compatibility issue.

  I think for older models of laptops, the best solution is the use of a faster but external solution in the form of PCMCIA or USB WLAN card. With the help of these cards you will not have compatibility issues.
  What do you think of this?

• Install the new hard drive on Satellite Pro 6100

  Hello

  I have the Satellite Pro 6100 and the hard drive has failed. Bought a new hard drive but have no idea where to begin to install it. Also, I have the product key for windows xp pro, but don't have a disc. Is there a way to get around get one, or someone has any ideas please?

  Thank you

  Michelle

  Hmmmm... It's very strange that you n t have idea how to start. Throughout history, there are only two options:
  -for the installation of an operating system you can use the original Toshiba Recovery disk that came with this laptop. If you n t have it then
  -use the Microsoft installation for the installation of the OS disc. All the drivers, tools and utilities must be installed Additionally one by one. Each of them you can find on Toshiba download page under http://eu.computers.toshiba-europe.com > support & downloads

  Please note: the product key at the bottom belongs to original recovery image so you probably won't be able to use it for the activation of the operating system.

• Satellite Pro 6100 - is to "restore" a re - recovery CD install?

  Hello

  My Satellite pro 6100 won't start. "Starting process crashes and a message appears saying that the \windows\system32\config\system file:-«' is missing or damaged.
  When I ran the product recovery DVD, he asked me to confirm what operating system, I want to "Reinstall". At this point I turned it off because I don't want to do something that I can mean loose valuable data (photos) from my hard drive. The user manual is ambiguous, he speaks of restoring damaged files and restore the software preinstalled in the same section. Can someone tell me if I continue I will get the option just the file restore/repair damaged in question or he comes to wipe my hard drive (including my data) and completely re - install windows XP?
  Thank you

  Hello

  If you are using the recovery CD it erases everything on your computer! So if you have something that is important then it first save!

  BR

  Tom

• Can't see the new hard drive on my Satellite Pro 6100

  I bought a new Toshiba 40 GB hard drive for my Satellite Pro 6100.
  I installed it in the Bay, but it is not recognized in the BIOS, or when I try to reinstall using the recovery disk!
  Bios recognize that there are in the car, even if it is not formatted?
  I'm missing something?

  Thanks in advance

  Neil

  It should work!

  The reader should also be recognized that even he is not formatted...

  3 things you can do:
  At the start you can go in bootmenu and check if the drive is recognized on the 1st controller.
  If this is not the case, check the configuration of the drive (master, slave, CSEL).

  If this is not enough to check the toshiba support website and download the latest version of the bios (probably you already have, check as mentioned above)

  If this does not work your new drive (or worse: your controller) could be faulty. If the reader of the Moose still work on your laptop, check the 40 GB drive to another laptop or PC with adapter ATA connection normal.

• Is it possible to install Windows 7 on Satellite Pro 6100

  Is it possible to install windows 7 on a Toshiba Satellite pro 6100 computer? I am currently using windows XP.

  Thank you.

  Hey Buddy,

  Do you really think on installing Windows 7 over several years old Satellite Pro 6100?

  In my opinion, it won't work because it is too old and not fast enough. Newer operating system that is supported by Toshiba is Windows XP and this should be the best choice for good old classic.

  So just to be satisfied with Windows XP, it's a good choice for older computers! :)

• Satellite Pro 6100 - what CD/DVD drive that I can use

  What DVD player is supported by the Satellite Pro 6100?
  I need to upgrade

  Thank you much for the help.

  Hello

  May I ask if you took a peek in the user manual?
  In most cases, information on compatible CD/DVD players are placed in the user's manual.

  Just for the note; You can also order a compatible CD/DVD player with ASP in your country!

  Check it out!

• Re: Satellite Pro 6100: can I use RAM PC3200 modules

  Hello

  I looked on the specification for this laptop and it does not have to go on 1gig, on the site of crucial, it says to use pc2700,

  But the laptop would always fully work with PC3200 (400 MHz) in it?

  Also the laptop actually supported on 1gig?

  Thank you

  As much as I know the Satellite Pro 6100 supports a FSB 400 MHz.
  So, theoretically, you can use the modules supporting 400 Mhz too.

  It is important that you use the modules DDR SODIMM 200 pin.
  The Mhz may be different.

• Satellite Pro 6100-> DVD playback is OK, but can not read CD

  I have Toshiba Satellite pro 6100 and the reader of CD/DVD SD-C2502 on winxp sp2.
  The drive did not read any CD/DVD at the outset.
  After a DVD lens cleaner, it plays DVDs, but the Player cannot read any CD incl. music CD

  The error is 'windows cannot read the disk. The disc is damaged or... ".

  I "took off the CD/DVD drive and reconnected" and the pilot also seems to be OK.

  Any suggestions or ideas?

  Hello

  This sound like a player cannot calibrate properly and that's why the drive cannot read the CD disks.
  Especially the replacement drive is necessary and inevitable. :(

• Re: What can I do to get my Satellite Pro 6100 from the dead?

  It's now quite a few years I have a * Satellite Pro 6100 *. I recently had the following problem.

  * _Problem_ *.
  When I press the power button to turn the computer into the AC power light starts flashing orange light (flashes come in groups of eight, the second and eighth flash are longer). Nothing else happens: the computer is dead as a brick. To stop the flashing, I have to disconnect the main power supply and remove the battery.
  * + Note: the power supply is ok.

  * _Question_ *.
  What should I do to restore normal operation?

  Thank you

  Post edited by: hnav

  Hello

  I put t think you will be able to do anything that would bring back the laptop from the dead.

  According to your description books sends a flashing error code that appears always if a motherboard error has been detected.

  In your case only an ASP might help you.

  First, the technician would be able to read the code and then to know what part is malfunctioning.

  In the worst cases, the motherboard must be replaced; (and this could be a costly affair.

  Good luck

• Signal not detected on Satellite Pro 6100 wireless

  I have two laptops Satellite Pro 6100, two of them are configured to automatically connect to our local wireless router which they both started.
  A computer is used by myself by my wife; bookmarks, email accounts and so on are different on every computer/hard drive.

  I have problems with one of the computers (mine) - the usual problem with multispindle connectors on the video boards and feeding, then I tried to use "his" computer with 'ma' machine's hard drive.

  His machine does not recognize our LAN with my hard drive installed. He came up with a new network found, but not a wireless network. Also, with this machine and my hard drive installed, can't the machine to search for wireless LANs, the icon does not appear. The switch is turned on for wireless signals and it works very well with his hard drive in it. The network is protected, and the two machines have the same id in them for connection which work fine in the original engine.

  I don't really understand this condition. Something in the bios? Something on my hard drive that is not recognized by the computer? the wrong phase of the Moon?
  Suggestions how to trouble shoot and fix this?

  Both machines are XP Pro on them, latest updates.

  Hello

  Also AFAIK, Satellite Pro 6100 was equipped with different Wlan cards so if use different HDD with different driver then the Wlan card could not be detected by Windows XP.

  Check if the wireless adapter is listed in the Device Manager and recognized correctly.

• Satellite Pro 6100 - no idea on I need drivers

  Hello
  Well, I brought a Satallite Pro off ebay a few days back but I can't find what I need.
  I don't have any idea what the laptop except a Satallite Pro 6100 1.7 ghz, 512 MB ram mobile P4 CPU graphics card nividia.

  It would be great if I could know what laptop that I use to download the drivers, or at least be done in which I need only one I'd love to be able to change the brightness of the display by using the fn + F5 key and have the screen filling the LCD.

  Thank you.
  Mike.

  Hello

  I put t really understand your problem

  The European driver from Toshiba site provides all the important and necessary drivers for the Satellite Pro 6100.

  I assume you mean on the XP drivers
  Install all.

  In a first step, I recommend the installation of the common Module Chip Set Utility, display driver and then continue with the rest

  If you have installed SP2 please check the "Microsoft Windows XP SP2 update information" because some tools need to be updated.

  concerning

• Satellite Pro 6100: black border to the right of the screen

  After a new installation with windows xp when I star tup I have a black border (1.5 cm) to the right of my screen.
  After the beginning and the end of the screen saver, I have a full screen.
  but when my laptop started again I have this black border again.
  I have a satellite Pro 6100.

  Management information
  System
  Model = laptop
  Manufacturer = TOSHIBA
  Serial number = 0000000000
  UUID = ffffffff-ffff-ffff-ffff-ffffffffffff
  BIOS Version = Version 1.90

  OPERATING SYSTEM
  Caption = Microsoft Windows XP Professional
  Version = 5.1.2600 Service Pack 2

  CENTRAL PROCESSING UNIT
  Index = 1
  Manufacturer = GenuineIntel
  Name = Mobile Intel (r) Pentium (r) 4 - M CPU 1.70 GHz
  Version = model 2 Stepping 7
  Max clock speed = 1694
  Socket designation = uFC - PGA Socket

  Display
  Index = 1
  Horizontal resolution = 1024
  Vertical resolution = 768
  Chip Type =
  The RAM size =

  Very strange problem! Can you please tell us more about this problem? I assume that you have installed the OS on your own. Since when you noticed this weird display problem?

  Have you noticed this immediately after installing the OS (without driver)? Did you install the display driver on Toshiba support page?

• Satellite Pro 6100 Modem does not - No Dial Tone

  Hello

  I'm in terrible trouble. I have a big meeting Friday and discovered that the internal modem on my Satellite Pro 6100 does not work. I downloaded the drivers of software Modem since the support site, and the installation seemed to go OK. There are no conflicts listed in the Device Manager, and when I query the modem to in the properties of the modem (from the control panel), it seems question OK too, but...

  HE DIDN'T THERE WAS NO DIAL TONE!

  I don't know that it is connected to my phone OK. Instead of a tone, I hear a loud hum, with a series of clicks. I can't hear being composed either DTMF tones, even when I disable "wait for dial tone. This behavior is the same if the modem is connected to the phone line.

  I have a big rally Friday and will need this modem to work... any help would be much appreciated...

  Thank you

  Matt.

  Hello
  that doesn't sound so good!

  The measure where I read that your ad you´ve checked your system almost all.

  Right on the thing, have you installed a firewall or other programs to check system that denied access to the modem?

  It is also ok, you should let check your laptop on a faulty Modem.

  Good bye