Can I install Windows after formatting my laptop?

After an automatic update that probably did not work right (it was not any message like "update completed" or "your computer"), windows on my laptop no longer starts. There is every time a message just before windows start that some .dll files "were not found '... I tried to format my laptop using an older version of Windows XP, but the problem still remains. Now, I have no operating system.
Can I reinstall windows with the recovery CD? I have not yet try it... I have a portable Satellite U200.

Of course you can do it. It's very simple. Put THE switch recovery delivered ODD, portable media and immediately press C. Gardez_ him down for a few seconds. This will force portable to use ODD as the first boot device.

Just follow the menu on the screen.

Tags: Toshiba

Similar Questions

Rebuild (OS disk) drives can re - install Windows after installation of Linux?

Hi folks,.

Question: Can the disks to rebuild (OS + pilots) Re-install Windows, after a Linux installation?

Goal: The goal is to alternate between facilities of OS: Linux - and Windows - and Linux - etc.

Thanks again, good people.

Of

a valued customer

You have more question?

If you do not, please click to accept as a Solution to close this case.

Tank You

Cristian

I can't install windows xp on my laptop why?

I can, t install windows xp on some portable which was the prob?

I can, t install windows xp on some portable which was the prob?

Please describe your problem in more detail. Tell us what means "I can, t install. Exactly how do you try? What happens when you try? If you get an error message, please quote verbatim.

Not able to install Windows after formatting hard drive

I am not able to install windows on the computer. I have Dell Inspiron N5010.

Put under alert.

-Windows cannot be installed to disk 0 Partition 2.
Details: Windows cannot be installed to this disk. This hardware may not support booting to this disk. Make sure that the drive controller is enabled in the computer BIOS menu.

In the BIOS

SATA - AHCI mode

Hello

When you formatted the disk you also partition? Also, what version of Windows you are trying to install the system, and what media you are using to install it?

Have you entered THE system BIOS and changed the SATA settings to see if you can get Windows to load on this subject?

Todd

Can I install Windows 7 on a laptop replacement?

Original title: LapTop stolen

My laptop was stolen recently. I had bought and installed Windows 7 on a couple of years. I still have the CD and the code. I can install it on a laptop replacement I have? Also, can it be disabled on laptop computer stolen so that the new owner can not use it?

You can install it on the new laptop and reactivate over the telephone, this should clear the other plant on the stolen laptop:

How to activate Windows 7 manually (activate by phone)

1) click Start and in the search for box type: slui.exe 4

(2) press the ENTER"" key.

(3) select your "country" in the list.

(4) choose the option "activate phone".

(5) stay on the phone (do not select/press all options) and wait for a person to help you with the activation.

(6) explain your problem clearly to the support person.

http://support.Microsoft.com/kb/950929/en-us

If the person who stole your laptop uses a key Locator, however, they could use a good key Locator and reactivate the license, so there is no guarantee.

How can I install Windows 10 on my laptop Windows 7 in dual boot?

I want to install Windows 10 when it is available, but don't want to lose my current Windows 7 system.

I hope that I can set up as a dual boot.

What is the best way to do it?

Yes, it would be valid for both architectures. Make sure that the key is not yet installed on any system.

I can't install windows xp on my laptop sony.

Every time I put my cd on my cd drive and restart the computer goes to blue screen

If your computer came preloaded with Windows 7?

Before that you plan to replace Windows 7 with Windows XP. Have you tried to familiarize yourself with the operating system first?

http://techingiteasy.WordPress.com/2009/08/19/for-the-former-Windows-XP-user-welcome-to-Windows-7/

If you want to run Windows XP, you can consider to dual boot Windows 7 and Windows XP. You first need to know if your computer is compatible with Windows XP. Much more modern computers are gradually support for Windows XP.

How dual boot Windows 7 and Windows XP
http://notebooks.com/2011/02/01/how-to-dual-boot-Windows-7-and-Windows-XP-Part-1/

Another option is to run your license of Windows XP in a virtual machine on Windows 7. I have http://www.oracle.com/us/technologies/virtualization/oraclevm/061976.html

If you decide to do a clean install, please see the following:

Reinstall Windows XP
http://michaelstevenstech.com/cleanxpinstall.html

Insert your Windows XP CD, and then restart your computer.

When you are prompted to boot from the CD, do so. To do this, press any key on the keyboard.

Windows XP will go into its configuration process.

Once you arrive at the welcome configuration, press enter on your keyboard to start the installation process

Press F8 on your keyboard to accept the license agreement

Select the partition, and then press D on your keyboard to remove it

Select Format the partition using the NTFS file system

Press F on your keyboard to start the formatting.

Installation files will now be copied to your hard drive

Your system will be rebooted, the installation of Windows XP will continue

Cannot install windows 10 on my laptop because of Windows Family Safety Filter.

I can't install windows 10 on my laptop because of Windows Family Safety Filter. I tried to uninstall this app but still no luck.

Original title: upgrade Windows 10

Try to upgrade manually:

If the Upgrade Wizard of Windows 10 becomes blocked or unresponsive to 99%, wait at least 4 to 7 hours. If the installation program does not progress, close the wizard and restart your computer. Follow the instructions to upgrade manually by using the tool of creation of media or file ISO for Windows 10.

If you encounter an error about enough space to perform the upgrade, see the instructions:

How to install Windows 10 on devices with limited space

Task of pre-required

When you make significant changes to your computer for example updated operating system, you must always back up. See the links to resources on the backup by clicking the link for each version of Windows you are using: Windows XP, Windows Vista, Windows 7, Windows 8/8.1
- How to back up and restore your files manually
- How to free up disk space in Windows
- How to: 10 tips before installing Windows 10
- How to: 10 things to do if the Windows 10 install fails.
Retry the upgrade manually:

Option 1: Using the media creation tool

Download the media creation tool

Click with the right button on the MediaCreationTool.exe file and then click on run as administrator.

Note: How to check if you are downloaded or installed the update Windows 10 November

Select upgrade this PC now and then click Next

Option 2: upgrade using the file ISO for Windows 10.

Task of pre-required

When you make significant changes to your computer for example updated operating system, you must always back up. See the links to resources on the backup by clicking the link for each version of Windows you are using: Windows XP, Windows Vista, Windows 7, Windows 8/8.1
then
- How to download official Windows 10 ISO files
- How to: upgrade previous versions of Windows using the file ISO for Windows 10
then
- Turn off (preferably uninstall) your Antivirus utility before you perform the upgrade.
- Reboot several times, and then try again.
- Disable the general USB peripherals (for example - smart card reader). You can do so from the Device Manager.
- If you have an external equipment, attached to the machine, unplug them (example, game controllers, USB sticks, external hard drive, printers, peripherals not essential).
- Support your default BIOS reset BIOS.
- Check if there BIOS updates available for your system, and then to apply them.
- If you are using a SCSI drive, make sure you have the drivers available for your storage on a USB device and it is connected. During the installation of Windows 10, click on the advanced custom Option and use the command load driver to load the driver for the SCSI drive. If this does not work and the installer still fails, consider switching to an IDE based hard drive.
- Perform a clean boot, restart, and then try again.
- If you upgrade to the. ISO file, disconnect from the Internet during the installation, if you are connected in LAN (Ethernet) or wireless, disable both, then try to install.
- If you are updated through Windows Update, when download reaches 100% disconnect from the LAN (Ethernet) Internet or Wi - Fi, then proceed with the installation.
- If this does not work, try using the. ISO file to upgrade if possible.
- If you are connected to a domain, go to a local account.

I had pre installed windows vista on my laptop. now, I replaced the hard drive. so, can we recover only windows giving you the serial number?

I had pre installed windows vista on my laptop. now, I replaced the hard drive. so, can we recover only windows giving you the serial number? I have sony laptop.

How to get Vista recovery Media and/or to use the Vista recovery Partition on your computer.

There is no Vista free download legal available.

http://eSupport.Sony.com/

Contact your computer manufacturer and ask them to send a recovery disk/s Vista set.

Normally, they do this for a cost of $ small.

~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~

Or borrow a good Microsoft Vista DVD (not Dell, HP, etc).
A good Vista DVD contains all versions of Vista.
The product key determines which version of Vista is installed.

There are 2 disks of Vista: one for 32-bit operating system, and one for 64-bit operating system.

If install a cleaning is required with a good DVD of Vista (not HP, Dell recovery disks):

Go to your Bios/Setup, or the Boot Menu at startup and change the Boot order to make the DVD/CD drive 1st in the boot order, then reboot with the disk in the drive.

At the startup/power on you should see at the bottom of the screen either F2 or DELETE, go to Setup/Bios or F12 for the Boot Menu

http://support.Microsoft.com/default.aspx/KB/918884

MS advice on the conduct of clean install.

http://www.theeldergeekvista.com/vista_clean_installation.htm

A tutorial on the use of a clean install

http://www.winsupersite.com/showcase/winvista_install_03.asp

Super Guide Windows Vista Installation

After installation > go to the website of the manufacturer of your computer/notebook > drivers and downloads Section > key in your model number > get latest Vista drivers for it > download/install them.

Mick Murphy - Microsoft partner

How can I install Windows 8 of my 1.5 TB external harddrive without formatting?

Well I finally decided to move to Windows 8 (starting from Windows 7 x 64), but I'm stuck in a weird situation here... I image .iso Windows 8 with me but I will not be burn on a DVD, the only option would be either use a USB key or an external HARD disk... Unfortunately my 16 GB USB DRIVE no longer works (and the .iso image file does not in my other USB drives I had remaining)... So I decided to use my drive external HARD on the contrary - but there's another problem... about 750 GB on my HARD drive is full (there are all my files, movies, music, games, etc) and the rest is 'empty '...

So, how can I install Windows 8 of this external HARD drive without formatting? Since I don't have any other "spare" hard drives or USB keys with a lot more storage capacity... And I can't keep them in my laptop because it has only 500 GB...

Can I partition my external HARD drive and secure all my files in one partition, and format the other partition to use it to install Windows 8 on my laptop somehow...?

You can create a partition on your HARD drive and install Windows inside with Universal USB Installer
Here's how you create a new Partition
- Open disk management
- Right click on the partition that you want to split > Shrink > select size > Ok
- Unallocated space will appear
- Right-click on > Format give a letter
OR you can install windows on a different partition from your internal HARD drive

You can create a partition in the internal drive and extract files inside Windows and make it bootable with EasyBCD (3rd party free program to change startup options and other things)
- Create a new partition using disk management
- Extract the files to install Windows inside
- Open EasyBCD > add new item > WinPE > search for X:\Sources\boot.wim > add
- Reboot and choose the new element added to the startup in
I used this method once and it worked

I want to re - install windows xp on my laptop but I don't have the resource cd. I don't have the product key. What can I do?

Please

I want to re - install windows xp on my laptop but I don't have the resource cd. only I have the key to product label I can do?

also my frist question is that if I install this version (xp sp3) with my product key, it will be legal?

The downloaded file CANNOT BE USED TO INSTALL WINDOWS.

It is not a question of legal or non-legal. The file you download is not complete. The downloaded file will update an existing installation of Windows XP Service Pack 1 or Windows XP Service Pack 2 for Windows XP Service Pack 3.

Right click on my computer, then select Properties. The screen say for your version of Windows, including Service Pack?

Re-installation of Windows may or may not be the right solution for your problems. If you want to re - install Windows, read this article on the Toshiba site--> http://www.csd.toshiba.com/cgi-bin/tais/support/jsp/outFrm.jsp?ofId=AskIris&searchString=restore+windows+xp&x=7&y=9 in particular the section titled "using the recovery partition Toshiba HDD recovery utility '

After a fresh install with XP Home EWdition, Service pack 1, 2.0, and 3.0, I can't install Windows Update or IE8.

After a fresh install with XP Home EWdition, Service pack 1, 2.0, and 3.0, I can't install Windows Update or IE8. Update back me to http://support.microsoft.com/kb/2497281

Article ID: 2497281 - last review: January 18, 2011 - revision: 1.0

You may be unable to access the site Web Windows Update in Windows XP, Windows 2000, or Windows Server 2003 if these versions of Windows are not updated with the latest Service Pack

But I have service Pack 3. IE8 fails, install a convenience store, but after following the instructions there is no difference.

I am at a loss for the next steps...

There was problems with the server for updates for a few weeks now...

Many people say that download and run the Update Agent stand-alone file solves this problem:

http://download.windowsupdate.com/WindowsUpdate/redist/standalone/7.4.7600.226/WindowsUpdateAgent30-x86.exe

For more information:

http://support.Microsoft.com/kb/943144

For later use, it is not necessary to use all the steps you mentioned. You can upgrade directly from SP1a to SP3.

I click on upgrade, it starts to install then after about 2 seconds. it come I can't install windows 10 error 80070003.

Hi I'm moving to windows 10, once I click on upgrade, it starts to install then after about 2 seconds. it come can not install windows 10 error 80070003, someone has any ideas?

ABATTS

You can reset the Windows Update components by running the Fixit on this page. But if there is malware present, she will continue to reset the connection to the update servers:

How to reset the Windows Update components

http://support.Microsoft.com/kb/971058

Suggest you download and save the Fixit. Then configure the system before the clean boot by running:

How to troubleshoot a problem by performing a clean boot in Windows Vista/Windows 7

http://support.Microsoft.com/kb/929135

Once the Fixit has been downloaded and the system is started in the pure State, check that the native Windows Firewall is now on if a 3rd party firewall has been used previously. Now run the Fixit and choose the default mode. Restart once it's done and see if the system can be connected to the update servers. If he can't, then rerun the Fixit and choose aggressive mode. Turn it back on when he finished the race and updates.

I suggest before you stop and install the updates, disconnect from the Internet, first.

Try the upgrade again. If it does not work.

Task of pre-required

When you make significant changes to your computer for example updated operating system, you must always back up. See the links to resources on the backup by clicking the link for each version of Windows you are using: Windows XP, Windows Vista, Windows 7, Windows 8/8.1
then
- How to download official Windows 10 ISO files
- How to: upgrade previous versions of Windows using the file ISO for Windows 10
then
- Turn off (preferably uninstall) your Antivirus utility before you perform the upgrade.
- Reboot several times, and then try again.
- Disable the general USB peripherals (for example - smart card reader).
- If you are using a SCSI drive, make sure you have the drivers available for your storage on a thumdrive device and it is connected. During the installation of Windows 10, click on the advanced custom Option and use the command load driver to load the driver for the SCSI drive. If this does not work and the installer still fails, consider switching to an IDE based hard drive.
- Perform a clean boot, restart, and then try again.
- If you upgrade to the. ISO file, disconnect from the Internet during the installation, if you are connected in LAN (Ethernet) or wireless, disable both, then try to install.
- If you are updated through Windows Update, when download reaches 100% disconnect from the LAN (Ethernet) Internet or Wi - Fi, then proceed with the installation.
- If this does not work, try using the. ISO file to upgrade if possible.
- If you are connected to a domain, go to a local account.
- If you have an external equipment, attached to the machine, unplug them (example, game controllers, USB sticks, external hard drive, printers, peripherals not essential).

How many times can I install Windows 7 on your PC even after I continue to update the hard drive SSD for a bigger?

How many times can I install windows 7 on your PC even after I continue to update the hard drive SSD for a bigger? Unlimited?

Mike

There is no limit.

Can I install Parallels after installation of Windows using Boot Camp?

Windows on Mac

Can I install Parallels after installation of Windows using Boot Camp?

You can install Parallels, but you will not be able to transfer your license existing if its already active in Boot Camp. You first need to remove the Boot Camp, then you can transfer it to Parallels. You may need to reactivate by phone:

How to activate Windows 7 manually (activate by phone)

1) click Start and in the search for box type: slui.exe 4

(2) press the ENTER"" key.

(3) select your "country" in the list.

(4) choose the option "activate phone".

(5) stay on the phone (do not select/press all options) and wait for a person to help you with the activation.

(6) explain your problem clearly to the support person.

http://support.Microsoft.com/kb/950929/en-us

Can I install Windows after formatting my laptop?

Similar Questions

Maybe you are looking for