Can I install Windows Vista by using Windows vista basic home backup os disk '?

Similar Questions

• Can I reinstall Windows 7 Basic Home Edition with product key?

  my computer hp laptop provided with windows 7 Home Basic installed, but it was crushed. I was wondering if I could reinstall windows 7 Home Basic with the product key?

  New computers coming often pre-installed with Windows 7 have what is called a recovery partition. This is used to reinstall an operating system in the case of a system failure. To access it, you need to start when you start your computer by pressing a function key. This can be either F1, F2, F9, F10, F11, F12 key DEL or tab. See the manual that came with your PC for instructions on how to reinstall Windows.

  For HP, press F11 directly after switching on the device

  OR

  Reinstall Home Basic

  You will need a whole in a single installer disk that you can use to select Windows 7 Home Basic Edition during installation. See the following for instructions:

  For a DVD that contains all the flavors of 32-bit and a DVD that contains all the flavors of 64-bit that is Windows 7 Starter,Home Basic , Home Premium, Professional and Ultimate see

  here.

• Can I put Windows 7 Basic Home Edition of Windows 7 Home Premium using Windows Anytime Upgrade?

  Original title: Please open the question to get the detailed information about my problems!

  If please answer my questions paragraph wise and note the number of the question before you answer for which you write, I can easily understand.

  1.i am trying to restore my data, but it takes too much time. For more than 20 minutes, he came that system restore is initializing.
  2.i want to upgrade my Windows 7 Home Basic to Windows 7 Home Premium using Windows Anytime Upgrade.Will I need a product key to activate my Windows 7 Home Premium?
  3. can I still put my Windows even if I level of Windows 7 Home Basic to Windows 7 Home Premium to Windows 7 Ultimate?
  4. I lose all data while improving my Windows using Windows Anytime Upgrade(Windows version mentioned above)?

  If please answer my questions paragraph wise and note the number of the question before you answer for which you write, I can easily understand.

  1.i am trying to restore my data, but it takes too much time. For more than 20 minutes, he came that system restore is initializing.

  
  Depending on the size of the data set you want to restore, it may take a little time.

  2.i want to upgrade my Windows 7 Home Basic to Windows 7 Home Premium using Windows Anytime Upgrade.Will I need a product key to activate my Windows 7 Home Premium?

  
  When you perform an Express upgrade, you will receive a key product as part of your purchase.

   

  First of all, check that the edition of Windows 7, you are upgrading is already enabled (if it isn't, you will encounter complications and that you might start all by performing a clean installation). Click Start, type Anytime Upgrade, click the option to purchase a key. Wait while loading of the Express Upgrade page, click on the Windows 7 Home Premium Upgrade to buy it.

  Click Next, fill in your details (it is important that you do this because the product key will be sent to you as a backup in case you need to reinstall) enter your credit card information, click next to begin the upgrade, wait while checking the key, accept the license agreement , click upgrade, wait while the software updates, (it may take 10 minutes or more, depending on the case, updates are required), your computer restarts automatically, after the reboot, Windows 7 will notify its update of the computer, the computer will restart once more automatically and will be completed the upgrade, a windows will pop up by notifying the upgrade was successful and your computer is ready to use, click Close, you should be upgraded to Windows 7 Home Premium, your files, programs and settings stored, proceed to activate Windows 7 Home Premium.

  3. can I still put my Windows even if I level of Windows 7 Home Basic to Windows 7 Home Premium to Windows 7 Ultimate?

  Yes, you can do an another Express Windows 7 Ultimate upgrade using the same instructions as above.

  4. I lose all data while improving my Windows using Windows Anytime Upgrade(Windows version mentioned above)?

  
  No, you will not see previous instructions.

• How can I install windows 98se in windows vista 32, if I can use my SNAPSCAN AGFA 1212U scanner in windows vista.

  How can I install windows 98se in windows vista 32, as I install can´t as the term work program or or in the index file to install in the program. But maybe it s possible to install this program through MS-DOS and in this case, how is possible to install this program here. ! ? However, this is why I hope to hear from everyone out there, he can help, as soon as possible, so I can get through this problem. !

  Hello

  go to your computer manufacturers website and search for a driver and software download section

  Enter your computer model number and find "98SE drivers."

  good luck with it

  and it is not possible to take a 98SE released file and put it in vista for your scanner

• Can we install windows vista 32 bit OS on a computer that is pre installed with windows 7 64-bit OS?

  Can we install windows vista 32 bit OS on a computer that is pre installed with windows 7 64-bit OS?

  "ZainS" wrote in message News: * e-mail address is removed from the privacy * .com...

  @ Ken... I tried installinng windows vista by using the recovery disk that will get a customer with the computer dell laptop... and then he was trying to install vista on my computer... It works fine when installing files, but it is and stucks where he says 'finish installation' and he won't do anything after that... I tried to restart my computer and I could see Microsoft coportation logo and then my computer stucks to this screen and wont connect in... not sure what exactly to do... by the ways for your reply thanks

  You cannot use recovery discs to install with, if not for the exact model computer that you install.  You need a full installation detail of the model of Vista operating system you want to install since you don't downgrade your operating system to a system that offers no right of demotion.

• How can I install Windows Movie Maker 2.6 on my victory. 7? I don't want to win. Live Movie Maker. It is spam, compared with 2.6 MM Windows to Vista.

  On my Vista op system, I strongly use Windows Movie Maker. On my laptop Win.7 op system I have that Win. LIVE Movie Maker which is frankly junk. How can I install windows Movie Maker on my os. Win. 7?

  The big question is why MS took a good (not perfect), Windows Movie Maker for Vista and group a lot less - than to win. Live Movie Maker?

  On my Vista op system, I strongly use Windows Movie Maker. On my laptop Win.7 op system I have that Win. LIVE Movie Maker which is frankly junk. How can I install windows Movie Maker on my os. Win. 7?

  The big question is why MS took a good (not perfect), Windows Movie Maker for Vista and group a lot less - than to win. Live Movie Maker?

  For your information, Windows Movie Maker 2.6 is just a "water-down" version designed for computers cannot run the built-in Windows Movie maker 6.0

  Windows Movie maker 6.0 comes with Vista.
  2.6 MM Windows does not come with Vista. It is not a 'new' program. It is a compromise version.
  Excerpt from http://www.microsoft.com/download/en/details.aspx?displaylang=en&id=34
  Overview

  Movie Maker 2.6 is for Windows Vista users whose computer cannot run the Vista's Movie Maker version.

  To test whether your computer can run Vista's Movie Maker version:

  1. on the start menu, click all programs.
  2. click on Windows Movie Maker.

  If Movie Maker starts, you must not download version 2.6.

  If you get an error message that says: "Windows Movie Maker cannot start because your video card does not support the required level of hardware acceleration or hardware acceleration is not available", download and install Movie Maker 2.6.

  .............................................................................................................................................

  Windows Live Movie Maker is better, contrary to what you feel. Maybe, you're just not used to it?

  How can you install version 2.6? Go to the net.

  If you like Windows Movie Maker 6.0 so, here's a tutorial to install it in Windows 7 computers.
  http://www.SevenForums.com/tutorials/35151-Windows-Movie-Maker-6-0-install-Windows-7-a.html

• Satellite Pro A40 can't install windows without using recovery dvd?

  Hello
  I can't install windows xp pro on my A40 Pro sitting unless I have to use the recovery DVDs including family XP Edition pro.
  I own a copy of xp pro, but I just can not format the hard drive either through the xp pro Setup or using third party software.
  all ideas

  Thanks in advance

  Hello

  Maybe you have an old version of your Windows XP operating system in the Microsoft Windows CD.
  I guess you are not able to install the OS, because some updates and SP are missing on the CD.
  You should try to include service packs of MS, and then install the operating system.

  PS: I put t understand why you n t use the recovery CD. The installation is very simple and al Tosh drivers are pre-installed. OK, it s a Home version but there aren't huge differences of Pro

• can I install windows on my Samsung Galaxy Note II vista?

  Can I install Windows Vista on my Samsung Galaxy Note II?

  Hi, JosephBlack_jtb,

  NO.

  I don't think that it meets the requirements of Windows Vista

  http://support.Microsoft.com/kb/919183/en-us

• I can't install windows install on Vista Home Premium

  I can't install windows install no matter what option I have try all say that they are not compatible for my system. I searched high and low and tried several options but none seems to work. I recently demoted back to service pack 1 thinking that I could upgrade to service pack 2 and get the installer in this way. But now I can not install service pack 2 either. Any help in this area would be very appreciated thanks

  Hello

  1. why you try to install Windows install on the computer?
  2 does the problem occur when you try to install other programs?
  3 is the issue limited only with Windows Installer?
  4. what happens when you try to install Service Pack 2?
  5. you receive an error message when you try to install Service Pack 2?
  6. are you able to install some other updates?

  Provide us several inorder to information to help you better.

  You can see the link provided.
  How to ask a question
  http://support.Microsoft.com/kb/555375

• Can I install Windows DVD maker on my machine?

  I have a computer that has Windows Vista Business installed with Service Pack 2. I understand that other versions of Vista are equipped with Windows DVD Maker but not Vista Business. I want to burn a DVD so please can you tell me if I can install Windows DVD Maker on my machine.  If this is not the case, then what would you recommend? Thank you

  http://Windows.Microsoft.com/en-us/Windows-Vista/burn-a-CD-or-DVD-in-Windows-Media-Player

  You can not install Windows DVD Maker on Vista Business.

  You can use Windows Media Player, click on the link above.

• I click on upgrade, it starts to install then after about 2 seconds. it come I can't install windows 10 error 80070003.

  Hi I'm moving to windows 10, once I click on upgrade, it starts to install then after about 2 seconds. it come can not install windows 10 error 80070003, someone has any ideas?

  ABATTS

  You can reset the Windows Update components by running the Fixit on this page. But if there is malware present, she will continue to reset the connection to the update servers:

  How to reset the Windows Update components

  http://support.Microsoft.com/kb/971058

  Suggest you download and save the Fixit. Then configure the system before the clean boot by running:

  How to troubleshoot a problem by performing a clean boot in Windows Vista/Windows 7

  http://support.Microsoft.com/kb/929135

  Once the Fixit has been downloaded and the system is started in the pure State, check that the native Windows Firewall is now on if a 3rd party firewall has been used previously. Now run the Fixit and choose the default mode. Restart once it's done and see if the system can be connected to the update servers. If he can't, then rerun the Fixit and choose aggressive mode. Turn it back on when he finished the race and updates.

  I suggest before you stop and install the updates, disconnect from the Internet, first.

  Try the upgrade again. If it does not work.

  Task of pre-required

  When you make significant changes to your computer for example updated operating system, you must always back up. See the links to resources on the backup by clicking the link for each version of Windows you are using: Windows XP, Windows Vista, Windows 7, Windows 8/8.1

  • How to back up and restore your files manually
  • How to free up disk space in Windows
  • How to: 10 tips before installing Windows 10
  • How to: determine if a device application or hardware is compatible with Windows 10
  • Will remain the documents and applications, or install app must

  then

  • How to download official Windows 10 ISO files
  • How to: upgrade previous versions of Windows using the file ISO for Windows 10

  then

  • Turn off (preferably uninstall) your Antivirus utility before you perform the upgrade.
  • Reboot several times, and then try again.
  • Disable the general USB peripherals (for example - smart card reader).
  • If you are using a SCSI drive, make sure you have the drivers available for your storage on a thumdrive device and it is connected. During the installation of Windows 10, click on the advanced custom Option and use the command load driver to load the driver for the SCSI drive. If this does not work and the installer still fails, consider switching to an IDE based hard drive.
  • Perform a clean boot, restart, and then try again.
  • If you upgrade to the. ISO file, disconnect from the Internet during the installation, if you are connected in LAN (Ethernet) or wireless, disable both, then try to install.
  • If you are updated through Windows Update, when download reaches 100% disconnect from the LAN (Ethernet) Internet or Wi - Fi, then proceed with the installation.
  • If this does not work, try using the. ISO file to upgrade if possible.
  • If you are connected to a domain, go to a local account.
  • If you have an external equipment, attached to the machine, unplug them (example, game controllers, USB sticks, external hard drive, printers, peripherals not essential).

• I can't install windows on MacBook 15 inch 512 GB 2015

  Hello

  I just brought my new laptop I want to install windows on this 10 by bootcamp. I saw a lot of videos on youtube about installing windows on a mac.

  And I have the iso of windows and proceed to installing windows subsequently after that download the file of taking in charge of windows there was an error popup "WINDOWS FILE cannot NOT BE COPYED". Later when I retried but I need to download a media file, so I download the separate media file instead. But how do I add this file to boot camp instead download it again.

  Please help me with it on this error and the Windows Media file. IM using Bootcamp 6.0.1 so I think it's not see option select task during installation windows 10.

  Can I install Windows on mac without having to install the media file. While I can install it later when windows is installed on BOOTCAMP 6.0 NOT the PREVIOUS VERSION.

• Workstation HP Z240 Tower: can I install Windows 7 from scratch?

  Greetings!

  The operating system on my computer is actually win 10 Pro demoted to Win 7 Pro. I want to know if I can install from scratch Windows 7 in my computer using the Windows 7 disc with the computer.

  I was told, the operating system is Windows 10 but it uses an interface of Windows 7. I don't understand the need for this complication. If you can just install Windows 7, so why use an interface? Maybe this computer only works with Windows 10?

  What are you trying to do, as you say that you are already using Windows 7?

  I do not understand your question about "interface."

  The GUI (graphical user Interface) for Windows 10 incorporates most of the features of the GUI for Windows 7 and also of the GUI Windows 8/8.1.

  See: http://www8.hp.com/ca/en/products/workstations/product-detail.html?oid=8354563#! = form tab

  Your computer was preinstalled with:

  Windows 7 Professional 64 (available through 10 Pro 64 Windows downgrade rights)

  and also comes with a license and support for Windows 10 Pro software.

  My recommendation: given that Microsoft will stop supporting Windows 7 in January 2020 - a short period of absence - install Windows 10 to get security-updates for your computer now and after January 2020.

  Suggestion: if you have a "spare" disk drive, disconnect your current hard drive, connect the 'spare' and try to use this support for Windows 7 to install Windows.  That should answer your question about "can I install...". ».

• Can I install windows 7 on early 2015 macbook pro version with El captain?

  Can I install windows 7 on early 2015 macbook pro version with El captain?

  Thank you

  Install Windows 7 and earlier Apple Support on your Mac using Boot Camp -

  Check the tables in the link I provided to see if your computer works for Windows 7.

• Can I install Windows XP on a Satellite A300D - 14 p

  Can I install Windows XP on a Satellite A300D - 14 p?

  .. .thx for any info and/or messages...

  Hello

  Just to clarify something:

  -If you want to install Windows XP Home edition, but do not change the BIOS settings (leave it in AHCI mode) at the beginning of the procedure of facilities you must load a SATA driver by pressing F6. That's only way to install Windows XP Home edition with success
  -You can install WXP without driver SATA, but you must change the compatibility settings. Everything works fine, but if you change the settings on back ACHI you get BSOD every time when you try to start Windows XP Home edition

  If you want to install the SATA driver please install WXP if you use SATA starts the driver before installing Windows XP Home edition.