Can I install WXO on Satellite Pro L300-22N?

Similar Questions

• Installing XP on Satellite Pro L300

  I already did some research and came across this thread
  [t 26040]
  who has some interesting information.

  However, it is believed it I don't format the HARD drive after using the Intel Matrix Storage Manager Manager.
  How am I to install XP on the computer and wipe Vista in the process even if I can't format the drive?

  If I do not format the drive I find wih vista still be there while I install XP. I received a bunch of laptops to the school, I work to untangle and install programs, etc, however that was purchased for me is machines with Vista basic which is bloody useless.
  I have the machine's Satellite Pro L300.

  A clearer explanation of what to do would be really convenient.
  Also, in addition to the driver manager, do I need specific drivers for the HARD disk?
  I can't find anything like this in the pages of pilots for the L300 Toshiba.
  Thank you

  Roy

  Well, the XP installation is very easy.
  Some forum posts describe this procedure too.

  You read that the HARD drive should t be formatted after including the SATA driver. This is right. This means that you shouldn't t change all partitions and must format the C partition prior to installing XP.
  But you can easily install the XP on the same partition as Vista. The new facility will replace the Vista operating system and installation of XP would go you smoothly.

  The second possibility is to integrate the SATA driver in the OS XP using nLite as already mentioned above.
  nLite would create a new XP CD and would include the SATA driver.
  Then, you would be able to begin the Xp installation using the new CD and format the HARD drive and create or delete partitions.

  Easy ;)

• Can I install ConfigFree on satellite Pro 6100?

  Can I install ConfigFree (& which version) on my
  Satellite Pro 6100 P4 - M 2.0 GHz/XP Pro/15.0 "TFT/60 GB / 256 MB/CD-RW-DVD-ROM/LAN/Wi-Fi/BT?"

  Hello

  As far as I know that the free Config was not preinstalled on this unit.
  You can find this tool on the CD of tools & utility?
  If this is not the case, there is therefore no configfree for this model of laptop.

  Concerning

• Can I install WXO on Satellite 1605CDS?

  Hello

  I really hope that someone can help me. I have a Satellite 1605CDS and I try to install windows xp on it for the past few weeks, but now I'm starting to think that it cannot support another operating system except windows 98.

  Is it possible to install windows xp on Satellite 1605CDS and if so, please help me to do?

  Thank you.

  Hello

  After a long investigation, I found a site with the Satellite 1605 material specifications.
  http://TCE.Toshiba-DME.co.jp/Linux/Eng/spec.php3?model=PS160U-188

  For me it makes no sense to install XP on this oldie!
  This device supports max 160 MB of RAM. I think it s not enough to use the XP. Of course, you will be able to install it but the laptop would go slowly.

  I installed XP on the computer with the 700 Mhz processor and 128 MB, but please don t ask enforcement: (.) One word-> horrible!

• Can Satellite Pro L300-22N - I use a SATA hard drive?

  Hi all!

  My hard drive is broken. Now, I want to put a new one in it. I have a SATA hard drive, but I can put it in this laptop? Because the old one was an ATA (I guess)

  Thank you very much!

  Hello

  I can confirm the info given by Liam.
  The L300 supports the SATA interface and you use the SATA 2.5 HARD disk

• How can I fix the screen on Satellite Pro L300?

  How can I fix my screen Satellite Pro L300? I went by mistake about it.
  Although there seems to be nothing wrong with the external armor but there seems to be a few lines on the screen.

  The glass is cracked? You see the flow of liquid crystals when you move the screen?

  If the lines are perfectly horizontal or vertical, and then the glass behind the protective plastic surface is cracked, requiring a replacement LCD.

  An authorized service provider can give you a new LCD Module. Visit the Web from Toshiba for a list of the ASP

• Satellite Pro L300 1AD is unable to install the Windows XP display driver

  I just installed XP on my Satellite pro because my internet modem doesn't work with Vista.

  I went to the main site of Toshiba to install display drivers, but they moved it, it keeps bringing the message "this driver is not for this computer please contact manufacturer.

  I put t understand why because all the other drivers that I downloaded on the same work, it's just the display one page. Does anyone know what's wrong?

  You have downloaded the latest driver for Satellite Pro L300?
  On the Toshiba site it s version 6.14.10.4953.

  An alternative, you can try the drivers from Intel, but normally the Toshiba driver should work.
  I always use the driver from Toshiba and never had any problems.

  Furthermore, I looked on the Toshiba site:
  http://EU.computers.Toshiba-Europe.com

• How to install Windows XP in Satellite Pro L300-1 to 9?

  Hello!

  first of all, sorry if I ask something really obvious, but I'm quite new with this questions... sorry for my English, I'm not native.

  I have a Toshiba Satellite Pro L300 1 to 9 with Windows Vista preinstalled, but the thing is that I prefer Windows XP. I tried to install it, but it won't work.

  I read a lot of messages and comments on this topic in this forum and also in the web. The problem is that I don't know if the procedure and drivers to download are the same for all models L300. Mine is L300 1 to 9.

  Could someone give me a few extra simple instructions (I'm a beginner) on how solve this problem or a link to this question? I saw a lot of them, but none on this model L300 1 to 9.

  Thank you very much!!

  Hello!

  What do you mean with it doesn t work to install Windows XP?
  Please explain this!

  However, I think you forgot the SATA drivers. These drivers are required to install Windows XP, if your system is running in AHCI mode for better performance.
  The drivers, you can download the Toshiba site or on Intel:
  http://EU.computers.Toshiba-Europe.com-online decision-making supported Downloads & => Download drivers

  In addition, I think this link might be useful for you:
  http://APS2.toshiba-tro.de/KB0/TSB8602DB0001R01.htm

  Good bye

• How can restore factory settings Satellite Pro L300-100

  Hello

  I have a laptop Toshiba Satellite Pro L300-100.
  It kept freezing then nothing seamed to work on it. My operating system is windows Vista professional. So I decided that I had to do a full restore from CD.

  So I put the recovery CD in the drive which has been in the Toshiba without looking, I installed it but it installed Windows XP Professional.
  So obviously the wrong disc was put in the box when manufactured.

  So I now have Windows XP Professional on my computer none on my drives work.
  My cd does not work like obv that settings are not on the disk.

  Is there anyway way to restore my computer without the disk that I don't have to buy one when the wrong disc was in the first place. Of course, I know that I should have checked the disk, but it is like an accident full and the disc was not correct even in the first place

  Hey Buddy

  First of all a few words in that regard:
  > So I put the recovery CD in the drive which has been in the Toshiba without looking, I installed it but it installed Windows XP Professional. So obviously the wrong disc was put in the box when manufactured.

  It was not a mistake or a fault that the Win XP disc with the laptop.
  Your laptop computer was preinstalled with Vista BUSINES version and Toshiba portable computers that are preinstalled with Vista BUSINESS get besides a Win XP OS as an option to downgrade!

  In addition you didn t receive the Vista BUSINESS recovery disk because the Toshiba laptops with the option of recovery and HARD drive recovery, Toshiba disc creator software that allows you to create an OWN Vista recovery disk.
  BUT it can be done if you have not formatted the HARD drive...

  You can find lots of information about this recovery disk you manual there are some info and also a reminder has been preinstalled on your system that says; It s is strongly recommended to create a recovery disk.

  Well buddy. To cut this story you have just only one solution:
  You must buy the drive for recovery from here:
  https://backupmedia.Toshiba.EU/landing.aspx

  Good bye

• Re: Satellite Pro L300 - how can I reset the BIOS password?

  I put the password on the BIOS and electric start and I forgot the password.
  How can I reset the password?

  I have a Toshiba Satellite Pro L300.

  You must bring the laptop to an authorized service center to remove the password.

  Which country are you? Check your local Toshiba Web site for a list of the ASP (service centres).

• Satellite Pro L300-1AF fails to start

  I have a Toshiba Satellite Pro L300-1AF that won't start, it stopped working a few weeks ago and I tried startup repair and things, and nothing seemed to work just kept loading a black screen with a cursor but nothing else. After a little more research, I found out how to restore to factory settings holding the 0 key etc. when I tried this he got 54% then the screen everything went black and now it used to boot. It happens with just:

  -Unable to start windows. a recent hardware or software change might be the cause.

  file:\Windows\system32\winload.exe
  status: 0xc000000e
  Info: the selected entry could not be loaded because the application is missing or damaged.

  He also says to insert your installation disc, but I have not one when I bought it.

  -What this means and how can I solve this problem? I tried the factory restore and just make it even worse.

  Any help or advice would be much appreciated

  Hello
  > He also says to insert your installation disc, but I have not one when I bought it.
  That's your first problem. This model laptop was delivered without disc recovery but the preinstalled software that allows you to create a recovery media. All this is clearly described in the document s user manuals.
  Now, your original Vista operating system has disappeared. On this path virtual I can't say with certainty what the problem is, but somehow, I think the HARD drive's troublemaker.

  What to do now? First you need the Windows installation for the installation of the OS disc. Original Vista may not be used more so my advice to you is to get the Win7 32 bit install disc and try to install it on your machine. Win7 is entirely compatible, so there is no problem to install all the necessary drivers, tools and utilities.

  By default the BIOS settings and try to install Win7. If the same problem recurs and Setup will stop I m afraid HARD drive is defective. If possible, try to get another HDD for testing purposes.

  You know you have to play a bit with your machine now and find out what the problem is.

• Satellite Pro L300 - Dual boot with the AHCI mode

  Type of product > Notebook
  Family > Satellite Pro
  Product series > Satellite Pro L series
  Model > Satellite Pro L300 24L
  Model short-term > PSLB9E

  Hello.

  XP and Seven is installed in dual-boot on my laptop and I use EasyBCD to choose which system I want to start.

  To start XP, I need to enable "Compatibility" (Controller SATA in BIOS mode) and seven is "AHCI" must be activated.

  Is there a way for my two OS was started without making changes in the bios?
  Y at - it an update to correct this problem (or alternative)?

  Thank you in advance.
  Marc

  Yes you can do it but I'm afraid, you must reinstall Windows XP Home edition m.
  Why? Because before beginning to install Windows XP Home edition, you must change it to AHCI mode, launch the installation of Windows XP Home edition and before you start you need to load the SATA driver (via F6 I think).

  Long time ago, we have discussed a lot about this on this forum then use the advanced search anc check options other postings on this subject.

  By the way: check http://aps2.toshiba-tro.de/kb0/TSB7B020R0000R01.htm

• BSOD STOP 0 x 00008086 on Satellite Pro L300 - 1 K PSLB9E

  Hello

  My son came back from uni with his laptop which, to quote ' is knacked - no idea what the problem - been like that for weeks...» »

  At startup, it goes to the green bar of process, then goes off, then comes up with the BSOD - technical details: Stop:

  0 x 00008086 (0x00000000) (0x00000000) (0x00000000) (0x00000000)

  At this point, I didn't get any action with her, when I make a bad situation worse.

  The laptop is a Toshiba Satellite Pro L300 - 1 K (PSLB9E) running Windows Vista.
  (I would provide more information, if I could, but can't until I can start to check specifications)

  Thanks in advance.

  Hello

  BSOD can be caused by a hardware or software problem.
  First of all, you should check if it s not software related issue.
  In such cases, it of needed to reinstall the Windows operating system.
  Usually the new OS installed should not cause any BSOD!

  If the Toshiba Recovery disk does not help you, then you should start to investigate
  It may be a cause of modules defective memory BSOD issue very often.

  However, if you have no knowledge about computers, then you should ask a technician to downtown to control parts.

• Satellite Pro L300 - no sound with Win7 64

  I have the laptop according to:

  [Satellite Pro L300-1AF | http://uk.computers.toshiba-europe.com/innovation/jsp/SUPPORTSECTION/discontinuedProductPage.do?PRODUCT_ID=1058007&DISC _topSpeed = 1 & service = UK]

  I installed Win7 on the laptop, and now I can't get any sound. When you set the volume control, the level display changes on the operating system, so I guess everything is ok with the connections. I tried many different drivers, including the currently recommended drivers, as well as all the previous pilots (including drivers for different versions of the VICTORY, as suggested on some forums) after many hours trying to solve the problem, nothing seems to work.

  Any ideas or suggestions?

  Hello

  This means that the sound card is properly installed in Device Manager and you don t have no yellow exclamation?

  Perhaps portable speakers are silent. Simply press the combination of keys FN + ESC enable/disable sound.

• Satellite Pro L300 - XP runs slowly

  Satellite Pro L300 PSLB9E - Windows XP
  Works slow intermittently, but shows inactive in the Task Manager. Disable anti virus etc, but always slowly works intermittently.

  Can anyone offer advice please?

  Hey mate,

  First I must say that it is really hard to say why your laptop is running slowly. There are several reasons for this problem, but it would be interesting to know if you have installed the operating system preinstalled by Toshiba or did you install XP yourself using a disc of Microsoft? In this case, you should try this again with the Toshiba recovery disc. It contains a picture of the factory settings and so, your laptop should work correctly.

  In addition, I would recommend to defragment the HARD disk, disable some services and startup programs that you don't need and you try a good antivirus like AntiVir. After that, clean you the registry with CCleaner.

  Good luck!