Can I keep CS3 during the upgrade to CS4?

Similar Questions

• Keep VM during the upgrade to ESX 3.5 Starter

  I executed an ESXi 3.5 with 4 VM and upgrade to the version of ESX Starter.  No backup copy of these virtual machines (does not seem possible under ESXi) and an export to backup box also does not work because there is a lot of snapshots on virtual machines. (system used to trainingpurposes).  Y at - it a medium backup of ESX upgrade keeping these VM?

  It is no problem to install 3.5 from scratch and reconfigure the system, but I have to be sure that the virtual machine disappeared not later .  If there is no upgrade path records, is there a way to create a backup of these virtual machines or an export without removing snapshots?

  I hope someone can help me

  Concerning

  Martinus

  Since you are ready to install ESX 3.5 from scratch and to reconfigure the system, you can go for the option in the installer ESX 3.5 "Dungeon of the VMS and the VMFS (virtual machine file system) that contains. This option will ensure that the existing VMFS volumes that have intact, virtual computers during the ESX displays. After installation, you can manually register the virtual computers.

  In this case, you don't need to make backup of virtual machines, since VMFS volumes are secured intact.

  Fixing of the screen for you reference.

  * If you find this or any other answer useful please consider giving points by checking the correct or helpful answer.

• Can I turn off my PC during the upgrade to Windows 10?

  Original title: Upgrading Wondows

  Can I turn off my PC during the upgrade to Windows 10

  Can I turn off my PC during the upgrade to Windows 10

  Hello.

  No.; You can't turn it off while improving to 10.

  See you soon.

• How can I work around the compatibility test during the upgrade of Windows Vista Edition Home Premium to Windows 7 Home Premium?

  During the upgrade of Windows Vista Edition Family Premium of Windows 7 Home Premium, he stopped at the compatibility check and asked to uninstall McAfee Personal Firewall Plus. I uninstalled McAfee Total Protection, but the problem remains. I contacted the technical support of McAfee and it installed and running a deep cleaning products McAfee removal. But the problem remains. What should I do to work around the compatibility check, so that I can complete the upgrade to Windows 7 Home Premium.

  Go to C:\Program Files

  Remove the McAfee program from there folders

  Restart the installation again.

  Also:

  1. click on start, type msconfig in the search box and press ENTER.

  User account control permission

  If you are prompted for an administrator password or a confirmation, type the password, or click on continue.

  2. in the general tab, click Selective startup.

  3. under Selective startup, clear the check box load startup items.

  4. click on the Services tab, select the hide all Microsoft Services check box, and then click Disable all.

  5. click on OK.

  6. When you are prompted, click on restart.

  7. after the computer starts, check if the problem is resolved.

• I upgraded from CS3 to CS5 in December 2013. I have the original disks for CS3, but the upgrade was via a download. I need to reload windows on my PC and Photoshop. Can someone tell me how to download it again?

  Hello

  I upgraded from CS3 to CS5 in December 2013. I have the original disks for CS3, but the upgrade was via a download. I need to reload windows on my PC and Photoshop. Can someone tell me how to download it again?

  CS5 - http://helpx.adobe.com/creative-suite/kb/cs5-product-downloads.html

  You can also download the demo version of the software through the page linked below and then use your current serial number to activate it.

  Don't forget to follow the steps described in the Note: very important Instructions in the section on the pages of this site download and have cookies turned on in your browser, otherwise the download will not work correctly.

  CS5: http://prodesigntools.com/all-adobe-cs5-direct-download-links.html

• How can getting error Code U44M1P7 during the upgrade, I fix?

  How can getting error Code U44M1P7 during the upgrade, I fix?

  Update product that you are trying to install?

  Is it compared to the creative or perpetual clouds?

  Please check following if you have creative clouds.

  http://helpx.Adobe.com/Creative-Suite/KB/error-u44m1p7-installing-updates-CCM.html

• I don't like to upgrade Windows XP to Windows 7, because I'm blue screen/crash during the upgrade but the upgrade Windows XP to Windows Vista does not crash during the upgrade!

  I have my computer to another, here my specs:

  Intel Core 2 Duo
  Hard drive 500 GB
  2 GB OF RAM
  DVD player
  Floppy Disk
  The operating system that is running Genuine Windows XP Professional Service Pack 3 and just upgraded Windows 7 (but I know before upgrading Windows 7) and keep the blue screen / Crash when upgrading to Windows 7. but the upgrade Windows XP to Windows Vista is not blue screen/crash during the upgrade.
  Is anyone to upgrade from earlier version of Windows to Windows 7 without crashing and spending fortune?

  Hello

  1 did you change on your computer before this problem?

  2. What is the blue stop screen error message?

  3. When you receive a blue screen during the upgrade?

  You can follow the suggestions and then check.

  Method 1

  Disconnect external devices connected to the computer?

  Method 2

  You can read the article and then check.

  Upgrade Windows XP to Windows 7

  http://Windows.Microsoft.com/en-us/Windows7/help/upgrading-from-Windows-XP-to-Windows-7

  See also:

  Windows 7 Upgrade and Migration Guide

  http://TechNet.Microsoft.com/en-us/library/dd446674 (v = ws.10) .aspx

• It will be possible to choose the 32-bit or 64-bit during the upgrade to Windows 10 no matter what version you currently have?

  Original title: Windows 10 upgrade options

  It will be possible to choose the 32-bit or 64-bit during the upgrade to Windows 10 no matter what version you currently have? I know there are problems with the upgrade a 32-bit version on 64-bit directly, but it is possible to install 64-bit and have a backup installation files in the Windows.old folder.

  If you are currently running a 32-bit version of Windows 7 and you want to migrate to 64-bit Windows 10, you will need to download the 64-bit Windows 10. ISO and make a custom installation:

  How to: perform a customized Windows installation

  A custom installation will produce a Windows.old folder, but as that mentioned, it is none functional. The best thing you can do is to create an image of the system in advance if you need to go back to Windows 7:

  http://www.notebooks.com/2009/10/24/how-to-backup-your-installation-of-Windows-7/

  See also:

  What are the official update paths to Windows 10?

  Microsoft has revealed in a video of 9 Channel official upgrade paths to Windows 10:

  

  Users of Windows XP and Windows Vista will have to do a clean installation of a. ISO, so Windows 8.0 users.

  Source: http://channel9.msdn.com/Events/WinHEC/2015/OWD100

  If you try to upgrade to Windows 7 by using Windows Update, it will keep the same architecture.

  How knowledge publishing Architecture, canal and the construction of 10 Windows installed.

• Firefox will not start after the upgrade to 27. Seen an error message during the upgrade process.

  Firefox will not start after the upgrade to 27. Seen an error message during the upgrade process, but do not remember.
  Tried running firefox.exe Pei but error message:

  XML parsing error: the undefined entity
  Location: chrome://mozapps/content/profile/profileSelection.xul
  Line 18, column 1:
  "< dialog < =" "^ =" "p =" "> < / dialogue >

  Running on Windows XP SP3. No problem whatsoever before moving to 27. Sending of Chrome that I can't open Firefox at all.

  Thank you, jschaer2000. In the meantime, he works. How long, we'll see ;-)

• Protection of the projects during the upgrade of the Lion in Yosemite

  Hello world!  Does anyone know how to protect themselves from projects during the upgrade of the Lion to the operating system of Yosemite?  I heard shops of the horror of people the upgrade of an operating system to another and then having to rebuild their projects in the new operating system and I want to avoid if I can.  If there is no way to do so, any ideas on the record of ongoing projects would be greatly appreciated.  I have been turned off of this update forever and you have to do as soon as POSSIBLE.  I'm currently under OS X 10.9.5 and FCPX 10.1.4.  Thank you!

  10.9.5 are Mavericks. Could indicate you these horror stories? They may contain information that is largely obsolete. You want to check any third-party software and plugins to make sure they are compatible with the latest operating system.

• Error: The installer cannot set Windows XP required configuration information during the upgrade to Windows XP Home SP3 of Windows XP Pro.

  Original title: OEM Windows XP Home SP3 update XP Pro

  Here is a compilation of the messages from another forum regarding
  My problem:
  ---------------------------------------------------------------

  I'm trying to upgrade a Windows XP Home Sp3 OEM system to
  Windows XP Pro. (There are a few Pro features
  that are not available in the House I now need: (1) the files offline and
  (2) an add-on available for free to Onenote 2007, Top2onenote, requires a Pro).
  I don't want a clean install, but an upgrade. I bought a Windows XP Pro
  Upgrade CD on Ebay that was Windows XP Pro
  Gold (v2002). I'm sure that's true for the following reasons:

  It has been listed as an upgrade, but the CD is not labeled "Upgrade".
  It seems very authentic with all Microsoft holography.
  He came in the standard package of Windows XP (without box),
  and it was sealed.
  The name of volume for the CD is WXPFPP_EN. The Internet,.
  It is the retail of Windows XP Pro RTM (gold)!

  Here are things I tried initially.

  (1) I tried to upgrade to Pro from the purchased CD. It is immediately
  has refused to upgrade indicating the upgrade OS (Pro) is older than the
  installed OS (home)...

  (2) I read about "slipstreaming". "Slipstreaming" allows to integrate
  a service pack with an earlier version of the operating system. I created a
  upgrade XP Pro SP3 with Nlite slipstreamed CD image (and
  Autostreamer later, but it made no difference) from the purchased CD
  and a file containing SP3.

  After you burn the CD and start the upgrade
  (Windows installation), the upgrade process
  product through "information collection."
  "Dynamic update" and "Preparation of Installation" with
  no problems. My computer restarted and returned to
  "Installation preparation". A progress bar called 'Progress '.
  quickly filled to about 90% and the hanging system
  at that time there for about 15 minutes.
  Then, I got the following error message:

  Setup cannot set the required Windows XP configuration
  information. This indicates an internal Setup error.

  This is where I am stuck. I had to leave the installation at this point.
  My drive is starts raining and I had to restore a backup.

  (3) just for the heck of it, I formatted my hard drive and
  reinstalled my original OEM XP Home SP3 OS (no clean up, no user file).
  I immediately used my XP CD slipstreamed Pro to try one
  upgrade to XP Pro and IT WORKED! I need to find out why the
  properly clean XP Home OS upgraded to XP Pro but my pre-existing
  (with the files users, drivers, etc..) XP Home OS does not level
  successfully to XP Pro.
  -------------------------------------------------------------

  Another post:

  Yet once, today, I installed a new copy of OEM Windows XP Home Sp3.
  I continue with installation of all the essential and the add-on
  pilots (essentially all my original version). Then, I
  set up a network connection and firewall. With this configuration,.
  I ran the Pro XP slipstreamed SP3 CD. The upgrade to XP Pro
  success (even if the upgrade not configured my graphics
  card properly). I guess my current problem is either the registry,
  the WINDOWS, some user file or parameter file.
  ---------------------------------------------------------------

  Another post:

  I made a file and the backup of the folder C:\Windows folder
  on my system that is pre-existing (OEM XP Home Sp3). I also did a
  separate the backup the State of the 'system' on my pre-existing system.
  These are added my full image backup of her pre-existing
  system a month ago.

  I did a backup image of my system (minimum fees OEM XP Home
  SP3 with all the original installed drivers over a network configured
  connection and a firewall configured). This system will upgrade
  XP Pro with XP Pro SP3 slipstreamed CD successfully.

  Experiment 1:

  I've restored my minimum system. I then restored the C:/Windows folder
  and the State of the pre-existing system backup system. A startup
  has managed (with a minor irritant). I had to activate Windows.
  Then, I tried upgrading the slipstreamed XP Pro processor. He stopped
  at the same place during the upgrade and gave the same error as before:

  Setup cannot set the required configuration information Windows XP.
  This indicates an internal Setup error.

  Experiment 2:

  I've restored my minimum system. I then restored the system state only
  the backup of the pre-existing system. After startup I was asked to
  activate Windows, but answer Yes to the question would be to disconnect me
  the system. I couldn't get connected to try the XP Pro upgrade.

  Experience 3:

  I've restored my minimum system. I then restored only the C:/Windows
  the backup of the pre-existing system folder. Once again, as in experiment 1,
  the upgrade failed at the same place with the same error message.

  ----------------------------------------------------------------

  Before the experiment 3, I hoped that 3 experience would succeed so I
  could conclude that I had a registry problem. I'm not sure now.
  I don't know what to try next. Take the minimum system and reinstalling
  my files of the user is not an option that my hard drive has over 200 GB of
  programs! If I restore all files and folders of my pre-existing
  I would still have backup to restore a system state the reliable (read the registry).
  ---------------------------------------------------------------------

  Sorry for the length! If anyone has any ideas I would appreciate your responses.

  Thank you

  Hello

  This problem can occur if a piece of hardware that is installed on your computer is not compatible with Windows XP.

  For more information, see this link:

  Error message: Setup cannot set the required Windows XP Configuration information

  Hope the helps of information.

• Optiarc bd rom bc - 5500 s work stopped during the upgrade to Windows 7, Windows Vista 64-bit impossible to load the driver.

  Hello

  I use sony vaio VGN-FW290 JTH. I tried to upgrade to Windows 7 and has been invited to uninstall iTunes, Vaio Care, ATI Catalyst Install Manager, ATI Catalyst Control Center, Google Toolbar. I uninstalled it, rebooted the PC and then tried to run Windows 7 installation DVD. Then, I realized that my CD/DVD/BD does not, marked with! in the Device Manager. I tried the procedure in this forum to the http://social.answers.microsoft.com/Forums/en-US/vistahardware/thread/957a26d4-4219-4b76-8e89-2e74e6ee2a0e/. I ran SFC tool - it pointed out some problems he couldn't fix it. I tried to update to the latest drivers for the drive, but Windows says that the latest drivers are installed. The properties for the device say: Windows cannot load the driver for this hardware device. The driver may be corrupted or missing. (Code 39):

  I hope someone from Microsoft or Sony can help - I think that it is catch 22 during the upgrade to Windows 7.
  Concerning
  Tomgold

  Hi tomgold,

   

  Welcome to Microsoft Answers Forums.

  This can also occur if an incorrect device driver has been installed for the DVD-ROM device.

  I suggest that you visit the DVD drive manufacturer site download the latest drivers for the drive and install on the computer and if it works. Make sure you download the Windows vista 64-bit driver.

  Device Manager error codes

  http://support.Microsoft.com/servicedesks/webcasts/wc091802/devicemgrerrcodes.htm?gssnb=1

  If the above, step fails I would suggest that you run the patch available in the link below and check if it works.

  http://support.Microsoft.com/GP/cd_dvd_drive_problems

  Halima S - Microsoft technical support.

  Visit our Microsoft answers feedback Forum and let us know what you think.

• Authorization request during the upgrade of the application.

  Hello

  I have the problem with the permission of the application.

  When I install the application, I get the message of trust application, but when I upgrade the application, I don't get the message of trust application but get the message "this application of [application name] has asked an http connection [link URL]" with checkboxes.

  These permission prompts appear 7 times in my application for different URLS.

  Why the permission is changed during the upgrade and how to avoid these prompts for permission?

  What you see is what I see too.  Updates seem to "revoke" the application permissions.

  To work around this problem, I recommend to start the application, that it has the required permissions.  The permissionsApiDemo is a good example of how to do this.  If the application has lost permissions, then you must prompt the user for you give the appropriate permissions - new PermissionsApiDemo is a good example,

  Don't forget that you can actually loose permissions in other ways, for example the user permissions of your application in editing parameters.  If it pays check every time.

• Eve during the upgrade

  Hello
  Rather than rebuild the day before from scratch after an upgrade, I can do this.
  
  We are moving from 11.1.0.7 to 11.2.0.2
  The plan is
  (a) continue with the log mode archive for preupgrade steps. So waiting is in sync with the primary.
  (b) main stop on 11.1.0.7 and trace 11.2.0.2 (boot upgrade)
  (c) Mount startup on hold using the 11.2.0.2 oracle home
  d continue with the upgrade of RDBMS on primary (in the mode of journal archive)
  newspapers of recovery (e) is shipped in standby mode during the upgrade period
  (f) primary stop and sleep at the end of the upgrade. Updated compatibility for 11.2.0 on two and do appear primary and start the recovery pending.
  
  I've not done this before. If someone has done this, and would it work? :
  
  
  Thank you
  MSK

  I suggest you:

  0 disable the primary log shipping
  1. stop standby
  2. install 11.2.0.2 on Standby
  3. start standby in recovery mode (don't run DO NOT catpatch.sql to sleep)
  4. primary stop
  5 install 11.2.0.2 on primary
  6. run catpatch.sql on primary
  7 re - enable log shipping
  8. watch it again apply primary eve - it will also improve the Standby data dictionary

  See Oracle support article: how to apply a group of patches, the power supply or the CPU in a configuration of data secondary physical custody [278641.1 ID]

  Hemant K Collette

• ORA-04063: package body 'SYS. DBMS_SQLTUNE error' during the upgrade

  Hello
  I am trying to upgrade the oracle 10.2.0.2 on 11.2.0.1 with dbua tool database. During the upgrade "Oracle Server" ORA-04063: package body 'SYS. DBMS_SQLTUNE"error has occurred.
  In the oracle server log:
  
  ---------------------------------------------------------------------------------------------------------------
  
  REM create the automated SQL Tuning task
  REM If the task exists already (catproc is re-of running) is not error.
  Start
  2 sys.dbms_sqltune_internal.i_create_auto_tuning_task;
  exception 3
  so 4 than others then
  5 if (sqlcode =-13607) then - task already exists
  6 null;
  7 other
  8 lift;
  9 end if;
  10 end;
  11.
  Start
  *
  ERROR on line 1:
  ORA-04063: package body 'SYS. DBMS_SQLTUNE"contains errors
  ORA-06508: PL/SQL: called program unit is not found: 'SYS. DBMS_SQLTUNE ".
  ORA-06512: at line 8 level
  
  ------------------------------------------------------------------------------------------------------------------------------------------------------------
  
  After unsuccessful upgrade I have restore and recover the database. SYS. The DBMS_SQLTUNE package and package body were valid. But when I compile them the package becomes invalid.
  I get the error and reach 390221.1 metalink Note:
  
  ------------------------------------------------------------------------------------------------------------------------------------------------------
  
  Solution
  -Drop synonyms
  Drop public synonym existsnode.
  excerpt from Drop public synonym;
  
  ----------------------------------------------------------------------------------------------------------------------------------------------------
  
  But there are no synonyms, which is mentioned in this note in my PB.
  
  How can I solve this problem? Thank you.

  If you have not read the note ORA-04063: package body 'SYS. DBMS_SQLTUNE' errors - upgrade to 10 G and 11 G fails on ID Dbms_sqltune 1271490.1+?

  Nicolas.