Can I limit data in the cells to a single app?
I am considering upgrading my phone to Rabat for an iPhone. I use iOS on my iPad for several years, but have never had a smartphone before. My iPads are Wi - Fi only so I never had to worry about the limits, and since I do not anticipate needs a lot of data I expect to get a plan with a small data limit.
I know I can say iOS does not allow the use of mobile data and only to access data via the Wi - Fi so that he does not eat my data when I don't want it.
My question is this:
I can say for a specific application access cellular data while blocking all other applications to do? For example, maybe I want to use an app for navigation while driving. It requires cell data for the navigation service knows where I am and you can send me instructions and alerts. But I don't want all the other apps on my phone goes on line and using data while I am using the cellular connection rather than a Wi - Fi connection.
No matter which iPhone I get would have iOS 9.3 on it. Probably the SE of the iPhone, but I'll look older before making a final decision.
Thank you.
Yes - cell data can be disabled for individual applications. So you can disable it for the applications that you want to restrict and let it on-site for those who have not. I hope you enjoy your new phone
Tags: iPhone
Similar Questions
-
How can you save data of the iCloud on an external hard drive?
How can I record data of the iCloud on an external hard drive?
Is not possible. iCloud requires a Wi - Fi connection to synchronize data. Cannot do it on an external drive.
-
write data to the cell in excel
Hello
I am trying to write data to a cell in excel. When I'm looking in sample program, I felt a bit difficult to understand.
I have written code to read data from a particular cell that works well. I am facing difficulties in writing data in the cell. pls help someone.
to read a data cell that works
status is Excel_RangeGetItem (rangeHandle, NULL, CA_VariantInt (i + 1), CA_VariantInt (j + 1), & MyVariant);.
Get the pointer of SHIPPING
status = CA_VariantGetDispatch (& MyVariant, & MyDispatch);
Create a Range object pointer for SHIPPING
status = CA_CreateObjHandleFromIDispatch (MyDispatch, 0, & ExcelSingleCellRangeHandle);
Get the value of the range of simple cells
status = Excel_GetProperty (ExcelSingleCellRangeHandle, NULL, Excel_RangeValue2, CAVT_VARIANT, & MyVariant);
status = CA_VariantGetCString (& MyVariant, &val);)
strcpy (CellValue, Val);to write data in a cell
status is Excel_RangeSetItem (rangeHandle, NULL, CA_VariantInt (i + 1), CA_VariantInt (j + 1), MyVariant);.
status = CA_VariantSetDispatch (& MyVariant, & MyDispatch);
status = CA_CreateObjHandleFromIDispatch (MyDispatch, 0, & ExcelSingleCellRangeHandle);
status = Excel_SetProperty (ExcelSingleCellRangeHandle, NULL, Excel_RangeValue2, CAVT_VARIANT, & MyVariant);
status = CA_VariantSetCString (& MyVariant, writedata);I know I made a mistake in the code above.
Thank you very much, Roberto. You have solved my problem.
-
Can I write data to the memory of the Machine (not SD card)?
Can I write data to the memory of the Machine no SD card?
I know that I add data using FileConnection like this
FileConnection fc = (FileConnection) Connector.open ("file:///SDCard/"+"da.txt", Connector.READ_WRITE);
This is the code that write to the SD card.
But if I want to write in the memory of BlackBerry, what path will be in the FileConnection?
Or is it impossible to add files in the memory of BlackBerry?
It will be something like "file:///store/home/user/".
-
Numbers - how to import external data to a cell in a single file into a new cell in another file?
I want to do the same thing in numbers (3.6.2 (2577) I used to do in Excel (any version):)
to import a calculation of a cell in a file in a new cell in another file.
Example: I want to import the result of a sum in a specific cell of my accountant in August to a cell in comparison in my accounting of September.
It was so easy in Excel. Until the reference computer broke down.
By the numbers, I tried to copy - paste the contents of the cell formulated, but not good.
No help manual online or anywhere. I think that maybe the function is absent in number.
Then I return to MicroSoft Excel, that I have used for many years and I am sorry to say feel much more wysiwyg.
Formulas in a numbers document cannot reference cells in other documents of numbers.
"Much more wysiwyg" is another way to express what many of those who "used (MS Excel) for many years" expressed as "more intuitive. These two descriptions usually boil up to ' what I'm used to, ", which is also true in the other sense.
Whatever the real explanation, the standard advice is "the tool that will do the job." If "the job" requires referencing values in a separate document, the numbers (alone and without the help of AppleScript) are not the best tool for this job.
Kind regards
Barry
-
Where can I find help for the companion of XBox Music App, App for video, or for games of XBox Live?
You can find the sites of support for these applications at the following locations:
-
I signed up for CC. I don't know that this Dreamweaver will come into conflict with my older version of CS5. You can run two versions of the DW on a single computer?
You can run two versions of the DW on a single computer?
Yes. Please do not duplicate messages.
Nancy O.
-
See the time with the date in the cell?
How do you not see time with the date in a cell? I tried all the settings I can find but without success.
Using the numbers from version 3.6.2 (2577) - OS: El Cap 10.11.6
I don't want to see that 12:00:00 AM
Hi Russ,
Inspector to format > cell, the parameters as shown below:
Kind regards
Barry
-
I run a recreational League of golf and have been recording the scores of the players (50 + players in total) with the intention of maintaining a form of disability from the League.
So far, I did most of the calculations manually in number. Recently, I have experimented using the Lookup function but have encountered a problem with the time where the player does not play this week.
In table 1, where I do all scores record cel when they do not play is left blank. However, in table 2 than corresponding cel returns a 0... strikes completely out of whack handicaps.
Here is what I used in table 2 for the information of table 1... SEARCH (name, 2016 Stats::Table 1 $Last: $ name, 2016 Stats::Table 1::G44)
I also tried to add an IF statement, but I have obviously not understood correctly as he said I tried to refer to a cel in the statement itself.
Example of the disability Page in the table 2 list a 0 is returned in cel 6... which is then averaged in the cel of last second... namely the problem. The cel with the 6 in it is a formula that counts the number of moves played and see it 6 because it counts as a trick played 0. This shows the wrong average score of 65.666
Them
A
78
1
78
Me
Me
80
75
81
0
81
77
6
65.6666666666667
-10
As it appears in table 1. indicating the total number of rounds played in 5 and returning the precise average score of 78.8
Me
Me
80
75
81
81
77
5
78.8
Hi pondball,
(Could be my 'golf name' somedays)
Formula in Handicap::B2 and filled to the bottom and right at Handicap::X4
= IF (LOOKUP ($A, data: $A, Data::B)=0,"",LOOKUP($A,Data::$A,Data::B))))
IF compared the results of the first SEARCH and if it is zero, returns an empty string. If the comparison returns FALSE, the second SEARCH is called, find and returns the result of zero. AVERAGE does not take into account all results of text, including the string NULL, a zero-length text value.
COUNT (used in the column count the number of turns) also ignores the text values.
4th place of disability shows one of the reasons for not using LOOKUP.
SEARCH alwas accepts a "close fit" with the search value. 'near match' for RESEARCH is defined as 'the largest value equal or less than the value of the research', and for the values text, "less than or equal" can be described as "identical or come forward in a list of items of text in alphabetical order.»
For us, the other two values in the name list are 'less' us and the most important is 'Them', the values for 'Them' are returned.
For this reason, I tend to use VLOOKUP instead of RESEARCH in many cases.
VLOOKUP present the disadvantage of requiring her research-where location which will be the first column of the lookup table (which is not a problem here, because the location of the research is one ot the column data table).
But also has the advantage of af being able to require an "exact match" search value.
Here's the same tables of two, with VLOOKUP replacing LOOKUP. Note that the VLOOKUP function has a different syntax than the LOOKUP function.
Formula VLOOKUP in Handicap::B2, filled with verse down and right at Handicap::X4:
= IF (VLOOKUP ($A, Data: $A:$ X, COLUMN (), FALSE) = 0,"", VLOOKUP ($A, Data: $A:$ X, COLUMN (), FALSE) ")
Written as above, the formula works correctly in rows 2 and 3, but will just return the error in the 4th row triangles, since it will not find a match (exact n) for 'Us' in column A of data.
After confirming that it produces no unexpected error, wrap the formula in function SIERREUR as shown below and repeat the filling down and the right filling operations above.
SIERREUR function interrupt all errors, including those affecting the results without your knowledge if they occur. Always delay adding IFERROR until you know what are the errors he fools.
=IFERROR (IF (VLOOKUP ($A, data: $A:$ X, COLUMN (), FALSE) = 0,' ", VLOOKUP ($A, data: $A:$ X, COLUMN (), F ALSE))," ")
Y2: = COUNT (C2:X 2)
Z2: = AVERAGE(C2:X2) (base form)
Z2: = IF (Y = 0,' ", AVERAGE (C2:X 2)) (real form)
The encapsulation of the AVERAGE function in the IF statement deletes the calculation if the number of items to the average value is zero, AVERAGE preventing from return to a division by zero error. The number of circles in the column there is NOT used in the calculation of the average (AVERAGE did his own count), but is used as a switch 'OK to calculate' leaving the calculation of the AVERAGE to move forward.
Kind regards
Barry
-
Windows 7. How can I see data on the Clipboard
I get messages saying that there is a lot of data on the clip board and asking me if I want to keep it or not. I have some information on the Clipboard that is important to me, but I do not see the data. All I get is the option either to keep information or throw it out...
I looked through all the programs and use the search files but I can't find any reference to the Clipboard. I like to keep the Clipboard as clear as possible, but I need to extract some data before deleting.
I'd appreciate any help, I am 78 years old and not exactly a computer Whiz kid, unfortunately. I bought a guide called "Windows for older people" - no where he mentioned Clipboard in the book
Help please
Pat King
Hi Pat,
The Clipboard stores not anything on the hard drive at all, there is no place of Clipboard, and it is not saved anywhere. If you turn off your computer, or copy something else, the memory is replaced by the new memory.
-
How to prevent the entry of the data in the cells that don't meet certain conditions
So, the question is that I have to warn the data to enter into the cell that does not conform '< 500' condition or, on the other hand, satisfy the condition «> 500 "»I noticed that the link was broken.
Here is the example:
for (r = currentDataGrid.startRow; r)<=currentDataGrid.endRow; r++)="" {="" search="" all="">=currentDataGrid.endRow;>
for (c = currentDataGrid.startCol; c)<=currentDataGrid.lastVisibleCol; c++)="" {="" search="" all="">=currentDataGrid.lastVisibleCol;>
Val = getCellVal (r, c); Get the value in the cell (the cube value)
If ( <= 10="" ||="" val="">20 val) {/ / my rule to block}
currentDataGrid.readOnly [r] [c] = 1; Block cell
} //END IF
} //END SECOND "FOR".
} / / END FIRST "FOR".This isn't a good solution if your form is too large. I use this function while the page is loading (CustomOnLoad() I think).
Good luck
=> -
Can I leave XML on the data of the group model cascades BB10 apps?
I did the analysis of XML in the XML data model & it's work very well. But impossible to sort data that's why I try to group data model...
Please help me...
Thanks in advance.
Hi all
Thank you guys for your valuable response.
I did the code below.
void::callXMLList() {} A
actIndicator = myNavPane->findChild ("xmlIndicator");
listView = myNavPane->findChild ("xmlListView");
GroupDataModel * model = new GroupDataModel();Load the XML data in the local file
XDA XmlDataAccess;
QVariant list = xda.load)
QDir::currentPath() + "/ app/native/assets/contacts.xml."
(' / contacts/contact ");Add data to the model
model-> insertList (()) list.value;
QStringList key;
me?<>
model-> setSortingKeys (key);
Create a ListView and add the template to the list
ListView * listView = new ListView;
listView-> setDataModel (model);
QTextStream out (stdout);
off< "\n="" connect="">
actIndicator-> stop();
}Thank you once again...
-
I am not able to download apps for my iPhone on the App Store. He just 'waiting '. But never starts the download. I tried with wifi and mobile data. The two are not downloading the applications Can u find out what's wrong? I use iPhone 5s
I had the same problem. At the same time hold the screen lock button and the home button until your iPhone restarts. That solved the problem for me.
-
the date of the first time, I install app
I need the date of the first time I have install agame, very important to me
The problem happened when my brother remove my apple mistakenly ID so I re register once again with the same old apple ID but the game does not connect with game Center and was told that (the game is attached to the different game Center account than you are logged)
I wrote to the support of game and I asked them to change the email on the game, but they asked me to tell them the date of the first time I have install the game and play with him. can - what someone knows the way to know this date
How I can got to this date, I have this game for 3 years and I don't want to lose my progress if some damage that happened to my iPhone
Please help me
I used iphone 4
Best regards
Mack
Sign in to your iTunes and make appear the purchase history, follow the steps mentioned in this article:
-
Can operate without BIS - in the universe of GMail and app blackBerry smartphones?
Hello!
I got a BB Curve 3 g 9300 for a week; I'm in England, and I have as well as a T-Mobile contract, Phones4U store in London. Before agreeing to buy the BB and the contract, I went through a whole bunch of things that I wanted to be able to do with the seller and received assurances that they were all possible without additional cost beyond the contract.
Now, the thing is that this contract includes unlimited T-Mobile internet, but does not include the T-Mobile "Blackberry Booster" - which I think is the terminology of T-Mobile for the BIS.
After checking with a nice lady to T-Mobile, I didn't expected to be a problem, because she said that the Blackberry Booster is necessary for e-mail system push Blackberry and Blackberry Messenger, neither of which I want.
Since then, however, I had regular problems with the GMail application (saying "this application requires a working data connection") and BB App World (with a similar message of not being able to connect to the server). This is not the case all the time - sometimes both work very well. But they do not (as described) approximately 40% of the time, and of course, it is enough to say that I can't rely on them.
So I just called T-Mobile again and this time I was told this was caused by not only not the Blackberry Booster. The person I spoke claimed that Blackberry power to prevent my apps to work (as I described) and that they periodically scan combined BB and disconnect people like me who are not pay for Booster/BIS.
So now I wonder if it's really true and - in other words - that it's effectively impossible to use a BB correctly without the Booster/BIS. If you are sure that you know about it, just reply to tide me over!
I should add that you can find out something about the GMail problem anywhere on the web, many different solutions proposed. But most of the success is old, and my impression is that none of the solutions are final. I also tried most of the suggestions, and they have not helped. (An important is only that I have not yet tried redownloading books service, because I do not understand, and because it sounds like it is bound to have BIS.)
Thank you very much in advance for any help you can offer!
Neil
Hi there, Neil.
That is right. To use BlackBerry App World and other applications like GMail, Facebook, and Twitter, you need a BlackBerry data package and access to BIS. Without access BIS, these applications work properly, even if you access GMail online via your browser and you can manually download the applications through your computer.
I hope this info helps!
Maybe you are looking for
-
Work around for the Ical does not send do not issue invitations
If I understand the problem, ical will not send an invitation email to someone it detects has an ical account. People don't know they have an invitation or they use Google or Outlook to their calendars. Despite everything, they just don't receive inv
-
My iPad 2, iOS 9.1.2 safari crashes constantly
Safari is constantly crashing and I can't seem to fix. Can someone help me?iPad 2, iOS 9.1.2, lots of storage. I tried to restore my iPad, to soft and hard closures, nothing seems to help.
-
Put multiple graphs of waveforms in a report
I am a new user of LabView and I am trying to select more then a graph of a waveform with a control or a list to my report of Word, but I couldn't find a way to do it. I can choose ONE of many graphics, but sometimes I need to send two or three. My .
-
How can I find temporary "password protect - startup."
I had recently 3 used dell computers with a mortgage company of bankruptcy to help out them of their office, their home & hung and EVERYTHING! of them are password at startup (windows xp pro), how do I go beyond, or reset the passwords, so I can use
-
Calendar sync with Gmail blackBerry Smartphones?
I recently had an accident with outlook and I was wondering if anyone knows if the csn curve sync with the gmail calendar and contacts?