Can I move a snapshot to another location and bring back later?

Similar Questions

• can I move all functions to another monitor and still close the laptop without turning off the second monitor on a laptop

  can I move all functions to another monitor and still close the laptop without turning off the second monitor on a laptop

  You define 'Action close lid' to the 'status quo' instead of sleep or Shut down:
  Go to-> double click "Power Options" Control Panel-> 'Select a power plan' under your selected plan, click "Change plan settings"-> "Change plan", click on the blue link 'Change advanced power'-> in 'Advanced settings' tab expand "power buttons and lid"-> extend the action of the 'close' lid, set "on battery" and "Plugged in" to "Do nothing"-> click apply-> OK button

  Multiple monitors: frequently asked questions
  http://Windows.Microsoft.com/en-us/Windows-Vista/multiple-monitors-frequently-asked-questions

  Set up multiple monitors
  http://Windows.Microsoft.com/en-us/Windows-Vista/set-up-multiple-monitors

  Move windows between multiple monitors
  http://Windows.Microsoft.com/en-us/Windows-Vista/move-Windows-between-multiple-monitors

  Understanding multiple monitors
  http://Windows.Microsoft.com/en-us/Windows-Vista/understanding-multiple-monitors

• I can't move a folder to another folder, because I said that I don't have permission to do.

  original title: authorization

  I can't move a folder to another folder, because I 'need to permission' to do.  How can I get permission... it's my computer, nobody else uses it.

  How to grant permissions in Windows 7

  1. Locate the file or the folder where you want to take in charge in Windows Explorer.
  2. right click on the file or folder and select properties from the Menu
  3. click on the Security tab, then click the button change. Click OK to confirm the UAC elevation request if necessary.
  4 Select user/group permission windows or click Add to add other user or group (you may need to do this for multiple users - ex: administrator and your own user account).
  5. now under permission section check the rights you want for the user that is to say 'Total control' in the "Allow" column to assign the rights to full access control permissions to the user.
  6. click OK for changes to take effect and click OK again to exit the Properties window.

• move a folder to another location

  When I try to move a folder to another location on the page it keeps decompress. I also sort by name checked but that doesn't work either. What I am doing wrong?

  The developers removed the auto arrange option in Windows 7. Or the other of these third-party patches will add back so you can turn it off.
   
  
  How to disable Auto organize into folders in Windows 7? -The Winhelponline Blog
  http://www.Winhelponline.com/blog/disable-auto-arrange-folders-Windows-7/ 
   
  
  Windows 7 - Windows Explorer Auto Fix - disable
  http://www.SevenForums.com/tutorials/92758-Windows-Explorer-auto-arrange-disable.html 

• I want to cut out spaces (bottom) of a ramp, so when I move the ramp to another location, you will be able to see through the cutting of the spaces and see the new view behind the railing

  I want to cut out spaces (bottom) of a ramp, so when I move the ramp to another location, you will be able to see through the cutting of the spaces and see the new view behind the railing

  marvwfactor

  What version of Premiere Elements and on what operating system works - it?

  Video or?

  Waiting for more information, you can apply ChromaKey (an effect of overlay of the effects of the program) to convert the solid color background areas in transparency. The success will depend on the nature of the solid color and how his strong colorrelates to the rest of the colors in the image.

  Please review and consider and provide more information, so that we can give you an answer with substance.

  Thank you.

  RTA

• How can I move an application to another screen

  How can I move an application to another screen

  Hold down the icon until they start to move. From there, you can tap the application that you want to move and drag it to the left or right to access the screen you want. Once you are finished, press the home button to complete the task and turn off the wiggle.

• How can I move a control to another Panel?

  How can I move a control to another Panel. For example, I currently have a textbox control and command which I would like to move to a tab of the Panel buttons 2... Is there a way I can just change the Panel they sit rather than remove the controls I have and then create new controls on the tab?

  Maybe you want to make the trip in IDE, not by the program...

  It is very simple: select the controls that you want to move, Ctrl-x or select 'Cut' in the Edit menu, and then select the destination tab, press Ctrl + V (or select Paste from the Edit menu).

  That's all.

• How can I move a file to another AI work/text in Illustrator 4.1? ART EXPORT and IMPORT ART and ART of the PLACE do not work.

  How can I move a file to another AI work/text in Illustrator 4.1?  Using the art of export, import or the art of the place don't give me image.  What transfers is a rectangular box with a big X in it.  Illustration of the song gives me only a distorted picture.

  If it really is version 4, it is 25 years old. I'm surprised you have install much less run. Then copy and paste does not work? These files generated in V4 or newer files? The really only files up to V8 may be opening in V4. After that, the format of file completely changed.

• I bought a new hard drive. I don't have a system recovery disk. Can I load Windows Vista from another source and activate using my original product key?

  I bought a new hard drive. I don't have a system recovery disk. Can I load Windows Vista from another source and activate using my original product key?

  Hello

  There is no download available from Microsoft Vista.

  Contact the manufacturer of your laptop and ask them to send a set of recovery disks.

  They should do this for a small fee.

  "How to replace Microsoft software or hardware, order service packs and replace product manuals.

  http://support.Microsoft.com/kb/326246

  Some manufacturers have more available Vista recovery disks.

  If this happens, you may need to try this instead:

  You can also borrow and use a Microsoft Vista DVD, which contains the files for the different editions of Vista (Home Basic, Home Premium, Business and Ultimate) must be installed. The product key determines which Edition is installed.

  Builders recovery DVDs are should not be used for this purpose.

  And you need to know the version of 'bit' for Vista, as 32-bit and 64-bit editions come on different DVDs

  See you soon.

  p.s. If the old hard drive is still installed and running before you change on hard drives and you never received the to purchase recovery discs, you can make the recovery discs from the recovery Partition which should be on the old hard drive. You will need to request that the manufacturer how to do as each computer manufacturer has their own way of making records of this partition recovery.

  It depends on the old hard drive still works.

• Win7: How can I move user folder to another drive

  (with all its tentacles of registry supported)

  Related to this issue but a little different (using Win7 RC)
  I would like to move the folders from the user for all members of the family to E:\
  What is the best way?
  When I cut and paste, I am warned a bunch of system folders. In addition, I don't see the LOCATION tab when I click on properties.

  When you create a clean installation, using the combination of a system SSD drive and a conventional disc, such as a data reader, there is a way to 'move' the users folder (normally, C:\Users) and the hidden ProgramData folder (normally C:\ProgramData) for the conventional disc, or the data reader, using an answer file, or an unattend.xml file for an unattended Setup, as mentioned above.

  For a person making a unique, one-time Setup, trying to figure out how to create an answer for fully automatic, just installation file to accomplish this small one, is average, far too much trouble.  It is also not necessary.

  It is possible, during an installation of conventional and interactive disc installation or USB thumbdrive, to enter what we call, 'Mode of Audit', until the computer is called or a created user name and perform the necessary reallocation.

  (1.) a conventional facility.  If you are using an SSD, at the point the installation process where you are asked where you want to install Windows, you must use disk Options to delete all partitions on the SSD drive, before you select the SSD drive as a target.  Do not manually partition or format the drive before installation.  Windows 7 will do and must do, because Windows needs to align the logical format with the characteristics of the physical drive, and, also, Windows wants a small system partition for its own purposes.

  2.) when installation stops, waiting for you to give a user name and a computer name, the computer are not!  Press Ctrl + Shift + F3, and the computer will restart in... (wait for it!) "Audit mode '!  Basically, Windows create a disposable administrator account and log in, as this disposable administrator.  Hurt you, with regard to this temporary user survive complete the installation, but the computer works normally, and you can install the drivers and software.  Every time that the computer starts in Audit mode (you are allowed to restart), a version of Sysprep.exe GUI will pop up, offering to restart the computer in OOBE (out of box experience).  OOBE is where you were a moment before - that is to say, where you create a username and computer name and installation is complete.  Do not restart in OOBE, until you are ready to complete the installation.

  3.) he should know what drive letter (or the location of the folder) will be assigned to your disk Datadrive.  So, it's time, in audit mode, to understand this.  If you need to partition or format the datadrive, do so now.  On the Start Menu, right click on "Computer" and select Manage from the context menu, go to the computer management console.  In the management console of the computer, storage/disk management, you will find tools to change drive letters, partition, etc.

  4.) you need only a minimal answer file.  It is an xml (text file) file created in Windows System Image Manager application.  You can call what you want.  I would say: folders.xml.  Here are the contents of a folders.xml file, which is re - locate users and ProgramData to D:\

  
  
     
         
             
                  d:\Users
                  d:\ProgramData
             
         
     
     
  

  I'm going to imagine a scenario where you make this file on another computer, and transfer to the computer when the installation is done using a USB key, which, when it is connected to the computer in Audit Mode, is attributed to the extra drive letter:

  You could probably just copy the text above into Notepad and save it as a text file with the .xml extension and be good to go, as long as you wanted to use d:\Users and d:\ProgramData as your Datadrive locations.  (I used this answer file, with success; I do not guarantee that it will work for others.)

  5. to use the folders.xml, located in the root directory of your flash drive, plugged and visible under U:\ form, you must open a command prompt, access c:\windows\system32\sysprep and give this command:

  Sysprep.exe /audit /reboot /unattend:U:\folders.xml

  This will cause the reboot of the computer, but you will end up right back in Audit Mode.  As long as you're still in Audit Mode, re-location of these dossiers is not complete, because the temporary administrator useraccount still has his stuff in C:\Users and there are still a few active databases in C:\ProgramData.

  6.) now, you need to say goodbye in Audit Mode.  Remember that a graphical interface for the use of Sysprep to initialize the OOBE appears whenever you re - boot into Audit Mode.  "So after restart you 5.) you will have your chance to run it.  (If it comes to your personal computer, do check the box "Generalize" in the GUI of Sysprep).

  7.) finishing your Windows installation, create a permanent user name and giving the computer a name, etc.  When you're finally running, go get to C:\  C:\Users should have disappeared.  C:\ProgramData is probably still there, but it is normally hidden, so you won't know, until you go to Folder Options and check Show hidden files and folders.  D:\Users and D:\ProgramData (hidden) must also exist.

  8.), I like the idea of using junctions to intercept any program crazy enough to hardcode to c:\users or c:\programdata you will need to delete or move C:\ProgramData, before creating a junction to C:\ProgramData pointing to D:\ProgramData.  The command line tool, mklink, is useful here.  Open a command prompt, and then type mklink /? to get instructions.  If you want a right click GUI tool, you can check:http://schinagl.priv.at/nt/hardlinkshellext/hardlinkshellext.html

  After you create junctions, I think you could use regedit to edit the ProfileList key to the locations of origin C:\.  Folders.XML will have changed the Folderlist key, so that everything points to D:\ instead of %systemdrive%\ or C:\   I'm not sure what would be the point, but you couldn't.

  HKEY_LOCAL_MACHINE\SOFTWARE\Microsoft\Windows NT\CurrentVersion\ProfileList

• How can I move the public folders default location to a new drive?

  I'll put up a brand new machine with Windows 7 pre-installed and a big 500 GB hard drive.  I partitioned the drive into 2 logical drives C: and E:

  Wherever possible I want to store all user data on E: (I know is not possible for all the parameters of the user to move - mores the pity).  I have not yet copied across all the data from my old machine so I just empty folders to play with at the moment.  I moved all the My Documents/pictures/etc files for the e: drive by changing the location in the properties of the folder.

  However, I can't do the same with public folders.  If I right click on the folder, click Properties, then location, it's like I can't change C:\Users\Public\... but it does not change

  No idea why, or how I can get around this?

  This is possible thanks to a Directory junction that can redirect to a new location of the Public folder.

  First create a new folder on E:\ and maybe you want to call it Public.

  Go to Cmd prompt as administrator.

  All copy existing public folders to the new folder created using the command
  Robocopy /MIR %Systemdrive%\Users\Public E:\Public     (or any name that you used for public folders on E :)

  You need robocopy as he takes care of hidden files, etc., especially if you have the recorded TV folder in public folders.

  Once the copy is transferred, you must delete the existing public folder and create a junction in his place. To do this, boot into Safe Mode as an administrator and remove the public content and file inviting again by running Cmd as administrator. To remove the Public folder:

  RmDir /s /q %SYSTEMDRIVE%\Users\Public
  
  After creating the new folder location and remove the existing public folder, now is time to create a Directory junction of audiences with the following folders:

  Mklink /J %Systemdrive%\Users\Public E:\Public                         (or any name you named the folder opublic on E:\)

  for example: mklink /dC:\Users\Public E:\Public   

  Now, all that is intended for the original Public folder gets directed to the new location.
  I hope this helps.

  samc1

• How can I move bright room to another computer

  How can I move bright room 2.2 to another computer XP system

  you are allowed 2 activations with your license.

  then, install on your new system and then activate.  If you do not want your previous room set up to count as one of your two activations in your old computer in a bright room, click Help > deactivate.

  If you can not activate on your new system because you get a warning that you have exceeded your authorized activations, disable on your old computer, and then try to activate on your new computer.

• Cannot move public folders to another location

  Original title: I encounter a strange error while moving the public folder?

  Hello world!

  I encounter a strange error while moving the public folder, although I've done it before without any problem.

  

  

  Thses files that are located in the Public folder in its original volume:

  

  and as you can see this folder "music" is available in the source "C:\users\public".

  That these two folders within the Public folder have been moved to the new location D:\users\public

  

  -----------------------------------------------------------------------------------------------

  However, when I moved to: C:\Users\Public via the command prompt and run the Dir command. I noticed this "Music" folder, but it is not "public music. After that I applied the last command, but instead of running this command:

  "robocopy /MIR %SYSTEMDRIVE%\Users\Public D:\Users\Public.

  I have run this command with the setting 'music' "Public"

  "robocopy /MIR %SYSTEMDRIVE%\Users\Public\Music D:\Users\Public.

  And the music folder moved:

  

  But I am quite sruprised that in the first time I did that I only work "robocopy /MIR %SYSTEMDRIVE%\Users\ D:\Users\PublicPublic .

  "In addition, as you can see that there is no ' Document Public" and "Public Desktop" in the output of the command "Dir /" via the command prompt. However, records two moved with the command "" robocopy /MIR %SYSTEMDRIVE%\Users\Public D:\Users\Public "without any problem.

  ------------------------------------------------------

  These steps, I made a request to transfer:

  This can be done by a directory connection that can redirect to a new location of the Public folder.

  First create a new folder on E:\ and maybe you want to call it Public.

  Go to Cmd prompt as administrator.

  All copy existing public folders to the new folder created using the command
  Robocopy /MIR %SYSTEMDRIVE%\Users\Public E:\Public (or any name that you used for public folders on E :)

  You need robocopy as it supports the hidden files, etc., especially if you haveRecorded TV public folder.

  Once the copy is transferred, you must remove the existing public folder and create an ajunction in his place. To do this, start mode safe mode as an administrator and remove thepubliccontents and folder, and then start theCmd as an administrator command prompt. To remove the Public folder:

  rmdir /s /q %SYSTEMDRIVE%\Users\Public

  After you have created the new folder location and deleting the existing publicfolder, now is the time to create a directory Junction forpublic folder with the following command:

  MKLINK /J %SYSTEMDRIVE%\Users\Public E:\Public (or any name you named the folder opublic on E:\)

  for example: mklink /d C:\Users\Public E:\Public

  Now, all that is intended for the original Public folder gets directed to the new location.
  I hope this helps.

  Hello

   
  The question you posted would be better suited in the TechNet Forums. I would recommend posting your query in the TechNet Forums.
   
  http://social.technet.Microsoft.com/forums/en-us/w7itprovirt/threads

• When I download compressed files, they go to the local > temp location, when I extracted all the files, they are sent to the My Documents folder. Can I go to the local > temp location and delete the zip file?

  When I download compressed files, they go to the local level > temp location, when I extracted all the files, they are sent to the My Documents folder. Can I go to local > temp location and delete the zip file? Knowing that I still have the data in the My Documents folder.

  Once they are checked, of course. If you want to keep a backup, you can move the zip file in your documents folder.

  In fact, you can delete everything in the temporary folder that is not currently in use. Best time to do this removal is immediately after the start, before launching other applications.

• How can I move buttons between the address bar and the search bar?

  I use for home, Developer Web, Download and so forth, to the right of the address bar, between that and the Google bar.

  But now I can't move in there, with the latest version of Firefox.

  I wish that when they create a new version, they would not take away what we customize things to do. so I can get all of them back?

  simon_a6 wrote:

  In customize I get the dots around the search and address bar, they cannot be changed.
  

  • The dashed border points out that you can drag and drop things here. White tile on the new tab Page have a similar design.
  • The search bar can be moved.
  • The address bar is pinned in place, unless you install Classic theme restaurateur.
  • Customize controls, buttons, and Firefox toolbars
  • Frequently asked questions after update to Firefox version 29
  • How to make the new look of Firefox as the old Firefox