Can I print my own business cards using HP phtosmart?

Similar Questions

• I can't ping my own computer by using ping 127.0.0.1 why?

  I can't ping my own computer by using ping 127.0.0.1 why?

  Hello

  ·         Were there any changes made on the computer before the show?

  If the loopback test fails, the IP stack is not responding. This problem may occur if one or more of the following conditions are true:

  1. The TCP drivers are corrupted.
  2. The network adapter does not work.
  3. Another service is interfering with IP.

  Follow the steps in troubleshooting section and check if that helps:

  How to troubleshoot connectivity TCP/IP with Windows XP

  http://support.Microsoft.com/kb/314067

• I can't print from Lightroom 4 or use gmail after I upgraded to Windows 10

  Since the upgrade to Windows 10, I can't print from LR 4 or use my gmail

  Hi carolt,.

  Please uninstall the printer & software drivers, reboot the machine and reinstall the updated drivers for the printer manufacturing site.

  Let us know if that helps.

  Kind regards

  Mohit

• How to print Avery 8371 business cards

  How can I print my business cards on models avery 8371?

  Hello JenniferKeen,

  I would first check to see if there is information on the Avery 8371 design and use these instructions. You can use the following models of Avery and download.
  http://www.Avery.com/vgnfiles/op/en_US/help%20Center/staticfiles/how%20To%20use%20Templates.PDF

  http://www.Avery.com/Avery/en_US/templates-%26-software/software/Avery-design--print-online.htm?N=4294967076&refchannel=3980ac83ae70a110VgnVCM1000002118140aRCRD

  If not, try the following.

  1. in the top MS Word menu bar, click 'tools '.
  2. on the menu drop down select "Letters and mailings" and then "envelopes and labels...". »
  3. in the "envelopes and labels" window, click on 'Options '.
  4. under "Printer information" make sure you have select the right type.
  5. under "Information of the label" make sure "Avery Standard" is selected.
  ' 6. find your 8371 tag number in the ' product number "(8371 - card) list and click it, then click the OK" "button.
  7. now click on the button 'Print' in the remaining window.

  If that doesn't help and you use Microsoft Word, you should post in the forums of Microsoft Office for Word. If you use another Office product, you can contact them for support.

  Sincerely,

• When I open a document in Firefox with Adobe Reader 9, I can't print (no problem if you use Internet Explorer)

  I am running Windows 7 (64-bit), using Firefox 8.0. When I open a document with Adobe Reader 9, I am unable to be with her (printing, recording, etc.) another what to see. When I use Internet Explorer I don't have this problem.

  The plug-in may not work well in Firefox because you are using an older version of Adobe Reader.

  Please note that there is currently a security breach uncorrected in Adobe Reader that is actively exploited by criminals.

       https://secunia.com/advisories/47133
  

  The current version of Adobe Reader (unpatched) is:

       Adobe Reader X (10.1.1)
  

  As an alternative, consider using

  • FoxitPDF Reader
    http://foxitsoftware.com/Secure_PDF_Reader/
    or
  • Sumatra PDF
    http://blog.Kowalczyk.info/software/sumatrapdf/free-PDF-reader.html

  You need to uninstall Adobe Reader unpatched software and install one of the PDF readers alternatives to its place as long as product Adobe is fixed, although you may find you like other products all also, or more.

• I am trying to print business cards

  I just bought a HP Photosmart C4480 all-in-One. I tried to print business cards using the type of stock perforated (equivalent to Avery L7414).

  I can't match the top margin so that printing starts within the perforated area. If I use plain paper that it lines up properly. When I use the cardstock I get different higher margins even if I do not change the setting. It's like as if the map is slippery in the printer after it gets taken up by the rollers and prior to printing. Advice please on what to try a solution?

  Always looks like a mechanical problem, however changing software shouldn't solve the problem if this was true. In any case, I'm glad that you were able to find something that works. My last word of the Advisor; stick with what works.

• What kind of paper setting should I set my printer to print business cards?

  HP PSC 2210 all-in-one

  Win XP Pro Media 3rd ed.

  No error message

  No changes made to the system

  I am trying to print business cards using Avery 2 faces of business cards printable 5876.

  When I print a test out of my biz on plain paper # 20 cards and adjust the settings so, everything goes well and a walk test using the regular stock # 20 everything comes out great!  But when I put in the stock cards Avery and hit go, the printer goes much more slowly while the scenario and images very dark with excess of toner on the card only stock.  But not on the paper stock. Why is this?

  Should I should change the settings for the automatic printer paper what setting for business cards?  If so, in what context? -Special papers, greeting cards, paper brochure or what?  PLEASE NOTIFY.

  Thank you

  Scott

  Hmm...  I just did a search on the card stock you use, it is designed for laser printing, do not ink jet.  That being the case, I suggest to try the thick paper or plain paper for the paper type.  The product of 8877 Avery may be a better choice for your inkjet printer.

• InDesign CS6 10 - up business card? Where is the model?

  Already have the design... does anyone know where I can find the place 10 model, so I can put the card out there? Thank you...

  Also... need to design a new logo today or tomorrow... anyone have the right techniques for a super simple two letter logo?

  Adobe has no rele4ased all-new models since CS4. You can always find those for download via InDesignSecrets.com.

  The model you have is actually an Indesign 2.0 file that has been updated to CS5. It is worth noting special about her, or any other template file that you would use to make your OWN business card layout. In this case, you place your card 10 times in the model. If you want a back side, add a page to both your one - up and up - 10 files, build back on the one-up and the palce that ten times (or use step and repeat, as I'll explain in a moment) in the ten dans le dix-up page - up page.

  You have not told us anything about this tutorial, so I can't help with where this model comes maybe. but you can make your own, or do without one entirely, using the Step and repeat in the Edit menu. Place your image of the only card on the page more in the position of the upper left corner, and then click Edit > step and repeat...

  Check the box of the design grid, and then set the number of columns to 2 and 4 lines and check the preview box. The value shifts. Your current model looks like it uses an offset 2.1375 vertical and horizontal 4.25.

• How can I print to hp photosmart all-in-one ipad 7280

  How can I print to hp photosmart all-in-one ipad 7280

  Hello

  But the C7280 is not active AirPrint, you can still print via the local network using HP ePrint mobile app.

  You can find the steps to get and use the application in the following document:

  http://support.HP.com/us-en/document/c02775166

• can I print a mirror image of with a HP officejet 4620?

  Can I print a mirror image of using my HP Officejet 4620? If so, how?

  Hello

  It is not really a printer capability that allows you to mirror image printer, but even more the software which is the engine of the printer.

  What device/operating system are you using? If you are using Windows 7, you will find the mirror image option in the properties of printer below.

  Often the easiest is to use Microsoft paint to return your image in a mirror image and save the image to print later. In the painting, under the option do rotate, flip the image vertically or horizontally depending on the orientation of the original to get a mirror image.

  

• I can't print business cards

  I bought a HP Officejet Pro 8500 a and Print artist version 23. I use the software and design business cards, take the A4 (which is a product of Avery 8571) and then print. The end result is the printer prints about 1/4 inch on the brands of preferated to the left. The alignment is off and I ruined sheets of cards preferated. I use regular paper now just to see if I can solve the problem but after exhausting all possibilities including choosing A5 and the creation of business cards 2x3.50 on the software, the printer still refuses anything else print that off to the left.

  Any suggestions?

  I thought of her after hours of changing the settings in the Print artist program. The setting must be on the cards own Cup istead a4 as Avery said.

• How can I use my electronic business card

  my electronic business card printing vista is on my my Office I follow the signs to leave it Setup Wizard. When I hit the icon it ask if I want t edit or delete.  When I call VistaPrint it says that it must be set up in my e-mail program by using outlook. but the program that I have now is windows mail.  what I can do to use my electronic business card spike sparkle

  Hi Spikesparkle,

  Electronic business card cannot be created by using with windows mail. You must have outlook 2007 is installed on your computer to use it. If you have any questions about the card with outlook, you can post your questions in the discussion of the agency group.
  http://www.Microsoft.com/Office/Community/en-us/FlyoutOverview.mspx

  http://Office.Microsoft.com/en-us/Outlook/HA100686361033.aspx?pid=CH100776961033

  Bindu S - Microsoft Support

  [If this post can help solve your problem, please click the 'Mark as answer' or 'Useful' at the top of this message.] Marking a post as answer, or relatively useful, you help others find the answer faster

• Can I use Adobe Stock images for printing on demand greeting cards

  A license is available for use as images to print on demand greeting cards

  Hello

  In the FAQ - frequently asked questions, Adobe Stock

  Adobe Stock offers licenses allowing licensees to sell products or services based on an asset?

  At the moment, Adobe Stock only provides standard licenses, allowing the licensee to use the asset only for illustration purposes.

  Licenses are available through Fotolia.

  Thank you

  Bev

• OfficeJet 4630: business card printing

  Software = MS DeskTop Publisher 2010

  = AVERY 8373 card Photo quality glossy paper (8 to a 8.5 x 11.0 sheet)

  Thanks to the MS Publisher software, I tried to print a full sheet of cards.  The top cards of 6 print perfect.  The bottom two cards do NOT print.  I tried this twice with the same result.

  Any help will be much appreciated.

  MeadeWayne

  Welcome to the HP Forum.

  Try the following with your label template:

  Avery Wizard for Microsoft® Office

  If you don't have Word, you can use the software online and then print on your printer.

  If you like:

  Click on through the creation of a model, and you can create a template of "plain".

  Add what you want each / all business cards.  You can add tiny photos or Clip-Art to the corners to customize each card and / or add funds.  Add text in any format desired for each card.

  ============================================================================

  The template creates a standard Word .docx document - any type of file owner fantasy.

  Set your printing preferences for media > Brochure glossy or similar so that the printer waits the thick card stock.

  Reference:

  Printing options

  WARNING: I have no interest in Avery - I am a user of the product.

  Click on the Thumbs - Up Kudos to show that you appreciate the help.

  Click on accept as Solution when the answer provides a fix or a workaround!

  I am happy to provide assistance on behalf of HP. I do not work for HP.

• LaserJer Pro 200 M351nw: residues of toner to print business cards

  When I print on bond paper, I get a decent, crisp image. But when I print on card stock thre is a powdery residue on the paper. I can drag it with a handkerchief and get a significant amount of powder on the tissue.

  I remember reference to paper stock that is sutiable for color lasers, but I can't find it all in stock business cards anywhere I looked. It is apparently a special paper.

  I went through the type of paper in the printer properties. The only problem is when I print business cards. Is currently trying Avery 5876 and 8876 and Office Depot 3700-R. The 5867 and 3700-R are labeled for use in color lasers. The 8876 is inkjet. Same negative results with all.

  All proposals/solutions would be greatly appreciated.

  Hi @1071 ,

  I see by your post only when printing on cards, you get powdery residue on the paper.
  I want to help you solve this problem.

  You have the Laserjet LaserJet Pro 200 M251nw?  How can I find my model number or product number?

  Usually, when there are residues, burrs, tasks of toner left on the pages is caused by the paper used or the type of paper selected in the printer driver. You already tried different types of paper and had the same results.

  The Avery 5876 you tried are Laser printers.

  It is recommended to use bright white paper or paper that is designed for use in Laser printers.
  Don't use paper that is designed only for use with ink jet printers.
  Progress of paper is porous and for printers inkjet that absorbs ink in the paper.
  Paper Premium isn't for Laserjet printers. Chemicals and the ink soaks into the paper and takes more time to dry.
  Use paper that is not too rough. Generally using smooth paper translates into a better print quality.

  I have provided the specifications of paper for this model.

  Specifications for HP LaserJet Pro 200 M251n and M251nw color printer.

  Up to 200 g/m2 (110 lb. index) cards

  I have a document with a few steps to try to see if this will solve the problem.

  Troubleshooting print quality problems.

  What is the weight of the cardboard?

  What parameter for the type of paper do you use?

  If you need help, let me know.

  Have a great day!
  Thank you.