Can I remove Logical columns that I will not use in the layer of presentation as the id or foreign key columns?

Similar Questions

• HP Photosmart 2610 says that it will not print, because the transport is stuck, but it is not

  my HP Photosmart 2610 all-in-one, said that he will not print because the transport is blocked. Well, he is not stuck. Yet, I can't print. I printed close to 20 000 cards because I bought and installed printer. What should I do? can you recommend a printer to buy. Looks like it's ready for the 'OS' yard HELP.  PAUL LACNY * address email is removed from the privacy *.

  Hello

  Perhaps he is worn and requires little (routine) maintenance (20,000 sheets is a lot of printing).

  As OEM HP is responsible for the good operation of the printer and their drivers. Check with
  HP support, their documentation online and drivers and ask in their forums.

  Good luck, you need to update or reinstall the latest driver.

  There are three models, so enter-> Photosmart 2610 - in the link of the HP driver and select the version
  you have - then select your version of Windows.

  Support HP & drivers
  http://welcome.HP.com/country/us/en/support.html

  Contact HP
  http://welcome.HP.com/country/us/en/contact_us.html

  HP forums
  http://h30434.www3.HP.com/PSG/

  =============================================

  The main issue is probably the drivers, but these can help:

  Add or remove a printer
  http://Windows.Microsoft.com/en-us/Windows-Vista/add-or-remove-a-printer

  Solve printer problems
  http://Windows.Microsoft.com/en-us/Windows-Vista/troubleshoot-printer-problems

  Open the printer Troubleshooter
  http://Windows.Microsoft.com/en-us/Windows7/open-the-printer-Troubleshooter

  Find the manufacturer's Web site
  http://Windows.Microsoft.com/en-us/Windows-Vista/find-a-printer-manufacturers-website

  Find and install printer drivers in Windows 7
  http://Windows.Microsoft.com/en-us/Windows7/find-and-install-printer-drivers

  I hope this helps.

  Rob Brown - Microsoft MVP<- profile="" -="" windows="" expert="" -="" consumer="" :="" bicycle=""><- mark="" twain="" said="" it="">

• Can't reinstall Vista. Because Vista will not get to the Setup screen.

  Hi people. Got a prob a little. Vista stopped booting the other night. So, I tried safe mode, and it hung on crcdisk.sys. So, I decided to get in shape. Problem is, it will boot from the DVD, but will not load / access the Setup screen (I waited for 7-8 minutes and nothing's happened, shows just the thing with the green bar).

  Not too sure if it's because the hard drive is 1 TB (but Vista was on the same front hdd with Windows 7). I tried to remove the 2 GB of ram (I use 4). No go. Tried another DVD rom, not go. Removed USB devices that have been connected. No go. I know that the DVD itself is fine. I tried on the other PC here, the installation screen came within 2-3 minutes. But his is not a 1 to (its 250 GB) the only DVD that will work / I install is the Windows 7 DVD.  So, how can I reinstall Vista?

  I deleted all partitions / recreated with the Win7 installation as well. Still couldn't get Vista to get to the Setup screen

  Any info appreciated

  Thank you

  Finally fixed it. I read that USB legacy can also cause this. So, I disabled it. Everything is good. Managed to get to the Setup screen, then reinstall Vista

• How to remove icons that I will not use BlackBerry Smartphones?

  Can I remove programs that I don't want?

  For example, the "Instant Messaging" icon... or... the "Center application" (which suggests you to download some programs).  I'm not going to use... Can I remove these?

  Thank you

  Welcme cmmunity supprt frums

  You can highlight and hide... Or I made a folder called MISC and put all the items you don't want in there hide the folder

  ENJy your BlackBerry!

• Logic problem.  JavaScript will not correctly add the values

  Simple logic problem.  I have radio buttons fixed to values 1 or 0, but the simple addition of characteristic adobe has used it add up?

  Basic story, I need to display the value of how no. GOs there, then multiply the amount of GOs No. against a locker's worth.

  While subtract 100 to get an academic score.

  Code to determine the value of a set of radio buttons;

  Switch (this.getField("Group_1").value)

  {

  case 'GO ':

  Event.Value = 0;

  break;

  case "NO GO":

  Event.Value = 1;

  break;

  }

  On the calculation tab, I then use the first calculate (sum +) selection to determine all areas, I would like to add (total of 24 possible selections) field name is (TOTALNG)

  After that I have a hidden field that multiplies the previous value TOTALNG * 4 (which represents the value of the note I want to determine each no. GO), then displays

  the total final that I simply subtract 100.

  It is, he does not appear correctly the initial value of the no-go. It is always 1 account back up to what it should be. I even select the radio to go button which resets the value to 0, but down altogether, it counts as if it is chosen and gives a value of 4.

  A way simple code so far, even seems (if the way im put it on foot does not tell you that I know little) but I do not understand what I can be missing. I even put a field of 0 to add in now just to see if she needs another value to add against just in case where there is that one number GOING to add.

  Any idea? My form is a probably a mess, but I think the code is simply stated if anyone is willing to look and laugh for a second to my work.

  Thank you

  The problem seems to be the order of computation of field, only not with the

  code. You can configure via a Set - other tasks - field form editing mode

  Calculation order.

• System will not use all the memory available on a 64 bit system

  I recently bought a laptop DV7. It contains Windows 7 Professional 64-bit and 8gbs of Ram. The system uses only 4gbs of Ram. Why is this? Is there something that can be done, so windows uses the full 8gbs?

  Thank you

  Here is the article will tell you how the OS & hardware reserves physical memory... http://blogs.technet.com/b/markrussinovich/archive/2008/07/21/3092070.aspx

  I noticed some discrete graphics cards are reserving large quantity of memory... but having said that, I did not affect the performance of the system...

• Cannot remove HARD disk configuration PERC 6i with use of the SAS drives foreign. Existing data are not important. Scratch reloading to redeploy the server.

  Dell Poweredge 2950 III with serial number note from the Admin: have the label removed according to the TOU > receipt readers traded since an identical poweredge almost eliminated. In the configuration of the PERC controller 0 6i utility, disk groups show as foreigners. Messages following the procedure to import the configuration, then remove before was not effective. The prior configuration appears in the menu.

  I would like to simply clean configurations of VD for the readers and the controller. After it is deleted then next step is to set up a configuration I want. My new Setup is not relevant for this post. The goal and the only question is how to clear existing shared disk configurations.

  VD0 clear addition to figure 2 SAS PD/hard drives as virtual disk unique. RAID levels 0, status is offline, SMART status not = no error, County VD = 1, PD = 2 count, operation = none

  Is a similar to VD0 VD1

  other berries are currently empty.

  For initial troubleshooting I have removed all the HARD drive except a single disk on the server. This disc shows also as stranger.

  In the PERC 6i config utility:

  VD MGMT doesn't show CONTROLLER0 - no configuration is present. Choice of the F2 are Config. Foreign config based on availability. (Create new VD and manage preserved Cache are greyed out) Right pane of the screen indicates "foreign Config present, controller prop.: DG = 0, County VD count = 0, County of PD = 1".

  PD MGMT shows only the formatted Mo 139 K SAS single, foreign = State, SMART status not is no mistake, operation = none

  VIEW FOREIGNERS shows DG0 = foreign, Virtual disk 255 with DG count = 1. County of VD = 1, County of PD = 1

  I installed 3 of the disks individually rotating as a single HARD drive with similar results.

  WITH 2 HDD SAS installed only difference is VD Mgmt shows County DG = 0, County VD = 0, County of PD = 2.   View foreign shows VD255 prop: Raid 0, Raid = foreign status, size = na, operation = none. | Disk prop group. : VD Count = 1, County of PD = 2, Ded HS = 0 (because it does not exist).

  Thanks Chris. Problem is solved. I would like to Flash the firmware as precautionary measure? Still confused why initial in the VD Mgmt tab procedure has failed.

  All readers of Restore tab PD-ready state.

  -Dave

• How can I remove creative cloud, that it does not allow me to delete it goes on to say: I have on the desktop programs that need.

  I'm trying to remove the creative cloud from my PC, but it keeps giving me the message that the programs on the desktop should, I just want to remove.

  Please use the Uninstall tool to uninstall creative cloud.

• How can I delete a site that I will not publish?

  Hi all

  Sorry in advance if this is a really stupid question.

  I am completely new using MUSE and construction of Web sites.   I've been playing with a few drawings on a layout of Parallax and slowly working my way through the process, with a lot of reading 'how' between the two.  However, I cannot find a delete option to get rid of the test sites and my recent items list, becomes long.  I tried to find the answer by looking at the forums and via the web, but all I can find are references to deleting a published site.  Please can someone tell me - in terms of complete fool - how can I delete a site, I never have to publish and was just a practice site?  Thank you very much.

  The only way to do it without uninstalling or Formate is to stuff everything in the Windows registry... delayed one.

• I don't know how i ' v, but I lost the toolbars at the top and bottom. [Alt] will not bring up the toolbar and scroll keys do not work. How can I fix it?

  I managed to hide the toolbars, ALL of them. [Alt] brings to the top of the toolbar so that I can change them. In addition, the [previous page] [next page], [home] and [end] keys do not work.

  You can have:

  1. Choose the Mode "full screen" or
  2. unchecked toolbars

  The F11 key activates / turns off Mode full screen or not. Full screen, you have no toolbars, no tab and no bar Add on (bottom).

  • See-> http://kb.mozillazine.org/Netbooks#Full_screen

  If unchecked you your toolbars (checked = displayed; UN - check = not displayed), and then do one of the following, then click on those you want to check/uncheck:

  • Right-click in the empty space at the end of the tab bar
  • Press the ALT key or the F10, the poster Menu bar, click View > toolbars
  • Firefox button > Options
  • Hold down the ALT key and type the letters of the keyboard V T
  • See-> https://support.mozilla.com/en-US/kb/Back%20and%20forward%20or%20other%20toolbar%20items%20are%20missing
  • Also see-> https://support.mozilla.com/en-US/kb/how-do-i-customize-toolbars
  • Also see-> http://kb.mozillazine.org/Toolbar_customization

  If this answer solved your problem, please click 'Solved It' next to this response when connected to the forum.

  Not related to your question, but...

  You may need to update some plug-ins. Check your plug-ins and update if necessary:

  • Plugin check-> http://www.mozilla.org/en-US/plugincheck/
  • Adobe Shockwave for Director Netscape plug-in: install (or update) the Shockwave with Firefox plugin
  • Adobe PDF plugin for Firefox and Netscape: Installation/update Adobe Reader in Firefox
  • Shockwave Flash (Adobe Flash or Flash): updated Flash in Firefox
  • Next-generation Java plug-in for the Mozilla browser: install or update Java in Firefox

• When I try to burn a video with windows media player, that it will not automatically to the window where add item option is available. Why?

  Remember - this is a public forum so never post private information such as numbers of mail or telephone!

  Ideas:

  • You have problems with programs
  • Error messages
  • Recent changes to your computer
  • What you have already tried to solve the problem

  You try to burn a video DVD? If_yes_that is not supported
  by Windows Media Player, try using Windows DVD Maker.

  The following items may be worth a visit:

  Burn a CD or DVD in Windows Media Player
  http://Windows.Microsoft.com/en-us/Windows-Vista/burn-a-CD-or-DVD-in-Windows-Media-Player

  Burn a CD or DVD in Windows Media Player:
  Frequently asked questions
  http://Windows.Microsoft.com/en-us/Windows-Vista/burn-a-CD-or-DVD-in-Windows-Media-Player-frequently-asked-questions

  Windows Vista - Windows DVD Maker - burn video disc
  http://Windows.Microsoft.com/en-us/Windows-Vista/burn-a-DVD-video-disc

  Volunteer - MS - MVP - Digital Media Experience J - Notice_This is not tech support_I'm volunteer - Solutions that work for me may not work for you - * proceed at your own risk *.

• User or login icons will not appear in the beginning upward / recorder key issue...

  Hello all, I am facing a very big problem with Windows 7. I recently installed Eltima software keystroke recorder Advanced to monitor my child's web history, and after installing I rebooted my computer, you are prompted. After my laptop has rebooted, I noticed the home screen started flickering really bad and all users of my computer have been removed from the welcome / login screen. There is nothing to click on. All I see is the background of Windows 7 with this motion of annoying flicker. After a while, I received this error. "The instruction at 0x770ed7a9 referenced memory at 0x00000020. The memory could not be written. Click on ok to terminate the program. "I tried to see if holding the key ctrl + alt + del would do me any good, and he didn't. There is no need to restart the computer. However; I am able to use SafeMode (networking). I went to CMD and type "control userpasswords2" and the box was always checked for password and connect to display at startup. I'm running out of options... Any assistance will be greatly appreciated! Thanks :)

  Start the computer in Mode safe, then use system restore to set Windows in a few days.

  If it were my child, I would have serious reservations about looking over his shoulder all the time. I think that there must be better ways to put the close supervision of 24 hours.

• How can I get rid of a (empty) toolbar not used at the top of my page?

  I have a completely blank toolbar at the top of my page, which removes space on my screen? Is it possible to close?

  You can select the toolbars to show or hide them here: view > toolbars

  Press F10 or press and hold the Alt key to bring up the 'Menu Bar' temporarily.

• When I go to my computer, then program files it will not show me the exe files

  When I go to my computer, then program files, that he will not show me the exe files, that told me what to do not have full administrator control, when I go to the page showing which is the administatrator he show me has a control total why he let me not see the exe files, it also leaves me not so far closed for my dvd writer dishes?

  Try Control Panel, user accounts, click the account, make sure that its listed as 'administrator '.

  close. Then, in control - panel.open 'Options records' stand & check the box 'Show hidden '.

  files & folders", uncheck uncheck them next box"Hide extensions"next"Hide protected. "

  files/folders", nearby... This you gives access, however, once youre thru with youre editing

  or see the files/folders, you must restore default in 'Folder Options '...

• How can I remove a picture that I put in place to share?

  I don't want to share a photo that is on my essential windows.  How can I remove it?  I don't want to see the photo of my friend.  Perhaps is it better to send a photo as the poster.

  Hello trudie2119,

  Thanks for visiting the site of the community of Microsoft Windows. The question you have posted is related to Windows Live Essentials and would be better suited to the Windows Live Solution Center community. Please visit the link below to find a community that will support what ask you:

  http://windowslivehelp.com/

  Mary
  Microsoft Answers Support Engineer
  Visit our Microsoft answers feedback Forum and let us know what you think.