Can I set up a surround sound 5.1 with the headphones?

Can I set up a surround sound 5.1 with the headphones? I plugged in the headphones, but it doesn't seem to work very well.

Great Question!

The output on the laptop is 2.0, unless specified.

Most of the 5.1 headphones do a virual surround sound experience unless they require multiple entries mini-jack, optical or cajolées.

The only way to experience true 5.1 on a notebook computer is to have a 5.1 card internal (which is not included in the course HP laptop computers) or buy an external plug (USB or ExpressCard).

Tags: Notebooks

Similar Questions

  • Air 2 can be set to 2 users and open it with the ID of touch by each person?

    The Air 2 may be set up for 2 users and each person open the iPad with Touch ID?

    You can store up to five fingerprints and they can be each of different people you want. However, iOS does not support several accounts, so everyone will access the same content - same contacts, email accounts, iMessage accounts, accounts of FaceTime and iTunes and App Store, notes, documents, etc.

  • Option of surround sound clothes outside with HD4870 HDMI connection after installation of SP1 Vista54

    Clothes outside with HD4870 and HDMI connection surround sound option
    I just built an HTPC and installed SP1 Vista64 and I have a problem. I have a DFI LanParty very X 58-T3H6 motherboard and a VisionTek Radeon HD 4870 video card with HD audio. I have a HDMI cable to my Sony AV receiver and all I get is Audio stereo. The subwoofer never wakes from sleep, or AV receiver indicates anything but a stereo input.

    I have the RealTek HDMI audio device installed, and he says he's working properly in Device Manager. Under properties, what is proposed is stereo speakers. Surround sound is presented as an option, but it is grayed out and not selectable. All drivers are up to date from four days and I have the on-board sound card mother disabled in the BIOS and it does not appear in the Windows Device Manager, nor are there any other audio device except the RealTek HD HDMI audio device.

    Other HDMI devices, such as my XBOX 360, a surround sound very well via the AV Sony receiver.

    VisionTek support told me to install the RealTek HDMI driver, I did, but that's all the help they were able to give me.  The problem persists.  Surround sound is gray under sound properties for this device,

    I took the HDMI cable from HDMI port on the video card and plugged on my XBOX 360 and I get surround sound, so I know that the cable and the audio/video receiver is configured correctly.

    If anyone has an extra idea about it, I know you more!

    Thank you!

    Hi flattery.

    Thank you for taking the time to post.

    Can you please post here the result of your dxdiag in the forum?

    ·         Click on the Start Orb on the Office

    ·         In the Search box , type dxdiag and press enter

    Once you're in the DirectX tool, click Save all information and save on your computer. Open the saved file (must be a text file) and copy this information and paste it into the forums here so we can see again.

    1. What is the version of the BIOS that you run on your motherboard?

    2 have you ever had this installation or surround sound from always grey work?

    Please let us know.

    Thank you

    Keith
    Microsoft Answers Support Engineer
    Visit our Microsoft answers feedback Forum and let us know what you think.

  • How can I extract a series of CDs of music with the same title, but each with its own number of CD?

    I have a set of 5 CDs of music, all with the same title but different disk numbers. Ripping the first is good, but when I try to rip the second I get a message that this title was torn. Each CD shows her number, but not in the title line. I guess the CD numbers aren't playing. How can I solve this problem and have all 5 CD end up in Media Player?

    Hello

    You can change the title of rip for CD1, CD2 and CD3 etc. Later, try to rip from CD & check if the problem occurs.


    Reference:
    rip music from a CD

    Hope the helps of information.

  • The Apple Magic Keyboard can operate without bluetooth when connected to an iPad with the lightning to the USB camera adapter?

    The Apple Magic Keyboard can operate without bluetooth when connected to an iPad with the lightning to the USB camera adapter?

    I love the Apple Magic Keyboard to be very light (I want it with me everywhere). I also like that I can choose the layout of the keyboard I want (Canadian multilingual), which is not available on any keyboard for any brand, with the exception of Apple iPad (and I did a ton of research). I have problems with the old model of keyboard Apple Wireless because of the Bluetooth connection: I often have trouble connecting. I want a reliable keyboard. I don't like having to plug the keyboard on the iPad, and I think that a wired keyboard can more reliable and safer than a wireless keyboard. And a wired keyboard never had battery problems.

    I read that the Apple Magic Keyboard can work wired with a Mac without bluetooth. And I read that some USB keyboards work with lightning to the USB camera adapter. There are several keyboards with a cable (Belkin or Logitech) lightning, but none with the available Canadian multilingual.

    So, if I buy a magical keyboard Apple and a Flash to the USB adapter of the camera, according to my needs, I'll be satisfied or I'm going to be disappointed?

    A better solution would be to have a male-male cable lightning between the keyboard and the iPad, but I don't find any of these products anywhere.

    Thank you.

    It will not work. And where did you read that the keyboard works wired with a Mac?

  • How can I show what bssid a user is associated with the CLI on 1242 Cisco ap?

    How can I show what bssid a user is associated with the CLI on 1242 Cisco ap?

    SH associated dot11

  • How can I register my copy of Lightroom 5.7 with the serial number that I bought? Information system currently lists the type of license as "creative cloud."

    How can I register my copy of Lightroom 5.7 with the serial number that I bought? Information system currently lists the type of license as "creative cloud."

    I downloaded 5.7.1, he asked for a serial number, and now everything is OK. Thanks for the help.

  • accidentally, I buy the windows version of adobe acrobat DC instead of the mac version. I have only a mac computer. can you please cancel my purchase and replace it with the version of windows with a mac version.  the order number is AD006058877NL. Rgds,

    I accidentally buy the windows version of adobe acrobat DC instead of the mac version I only a mac computer can you please cancel my purchase and replace it with the version of windows with a mac version.  the order number is AD006058877NL. Rgds, jan van montfort + 31681471049. [email protected]

    Hi Jan,

    I understand your concern, please see this doc on this subject: return, cancel or change an Adobe order

    Kind regards

    Rahul

  • I bought photoshop CS5 in 2011 and my laptop crashed and I bought a new one and had to re install the program. How can I do that I have my original email with the confirmation number ETC, but it does not appear on my order history?

    I bought photoshop CS5 in 2011 and my laptop crashed and I bought a new one and had to re install the program. How can I do that I have my original email with the confirmation number ETC, but it does not appear on my order history?

    Download from products of CS5 download

    Install and enter your serial number.

  • can I set mutiple home pages using fire Fox using the icons separate desk top?

    is it possible to set up several firefox desktop icons each with its own homepage with their own records to down load? If not, is it possible to set up so that I can switch between search engines, each having its own folder to load down? I'm kind of a newbie who doesn't rely on google any longer after having discovered the invisible web, but would like to be able to use all its resources but also google at any time.

    You can use the additional profiles if you want each shortcut on the desktop to open a session of Firefox with its own parameters.

    If you want to share data, you can use Firefox Sync.

  • Windows 7 can be set on a second computer when uninstalled on the first computer

    buy a windows 7 Home premium update on ebay but recently discovered that it was installed on his computer, but he says it uninstalled and it should work.

    First of all, buy used windows is kind of a bad idea, you have no guarantee that the person will actually uninstall it.

    Secondly, Yes, if windows has been uninstalled from a computer, so it can be put on another with the key used on the 1st. A single computer can use a key at the same time, so if you use and the person who that you bought na not uninstall, then he would not accept the key. Or it could, but we would say that windows is not genuine.

    If it sounds too good to be true, it probably is.

    It would be better to just buy a new copy of windows from a store, instead of opportunity on ebay.

  • When sending mail from windows, how can I set up my account to "undisclosed recipitents" in the address "to"?

    I get emails where address "To" said "undisclosed recipients". How can I configure my email so I can send emails without individually select each email address, I want to receive the emails I send?

     
    Use the Bcc: field instead of the To: field.
     
    Some mail servers require an address in the TO: field, tho.  If this is the case,
    use your own address.
    --
    Dave N.
    MS - MVP (Mail)
    Windows 7 Ultimate 64
    "cw44" wrote in message
    News: * e-mail address is removed from the privacy... *
     
    I get emails where address "To" said "undisclosed recipients". How
    can I set up my email so I can send emails without individually select each
    email address, I want to receive the emails I send?
     
     

    Windows 7 Ultimate 64

  • my video plays fine on the computer but the surround sound on tv sometimes the sound does not play, why is this?

    my video rendering plays well on the computer but when I play the video on my TV through the surround sound, some of the audio disappears. No idea why.

    I already checked the left and right channels and made sure my audio is in stereo format

    Maybe that's your problem:

    Re: audio missing on vimeo and youtube

  • How can I set up 2 physical network cards, 1 for the host and 1 for vm?

    Hello

    With the help of VMWare WS 7.1.  I have a physical machine with 2 network as the host cards. Currently only one of the cards network is connected to the network.

    It hosts a SBS 2008 Server virtualized (while we prepare permanent news of the home server). I know not to leave the virtual machine SBS see doamin on the network controllers.

    I want to give a static IP address on one of the network adapters on the virtual machine and allow the host have the map of others.

    Can someone give me the steps or point me to the instuctions?

    Or is it better to use a NETWORK card?  The virtual machine is currently using a NIC a nic virtualized in bridged mode.

    Thank you!

    1. disable automatic bypass on VMnet0 in network virtual and configured Editor to use the map NETWORK active on the host.

    2. in the Virtual Machine settings > set it to network adapter connected by a bridge.

    3. in the guest operating system, configure the IP address as you would on a physical computer.  Take a look at: Managing Your Windows Small Business Server 2008 Network

    It's as simple as that.

  • No sound after you connect the headphones.

    I have a pavilion dv6 laptop.  I have a headset that I want to use for the games, but I can't hear sound through them.  When I do my helmet of communication to the default device it doesn't let me.

    Hello Jack,.

    I certainly understand the inconvenience that you cross.

    It is possible that this problem would have occurred due to some incorrect settings or because of an incompatible or corrupted audio drivers.

    Important: Make sure that your headphones are not connected to the line (headphone) jack of your sound card or computer (unless you want to be listening with headphones rather than speakers). When you connect in the headphones, most computers automatically cut the sound to the speakers. Ensure that the headset is completely and firmly inserted into the correct socket. Plug in the headphones and see if the same appears in Device Manager.

    In order to understand the issue more clearly, I would ask that kindly provide me with the following information.

    1. Have you tried plugging in external speakers or any other helmet and checked if you are able to hear the audio?
    2. You are able to get the sound on your laptop's built-in speakers?

    If you are not able to hear the audio on the built-in speakers or other external speakers or any other headset, I would suggest trying the following methods and check if it helps.

    Method 1:

    Open the hardware and devices troubleshooter.

    Note: If your computer is having problems with a recently installed device or other hardware, try to use the hardware and peripheral troubleshooting tool to solve the problem. It checks the common issues of interest and ensures that a new device or hardware connected to your computer has been installed correctly.

    http://Windows.Microsoft.com/en-in/Windows7/open-the-hardware-and-devices-Troubleshooter

    If the problem persists, please follow method 2.

    Method 2:

    Check with the volume controls. Please follow the steps below and check if it helps.

    (a) right click on the speaker icon in the taskbar, then select volume control options.
    (b) check on "all devices evolving sound.
    (c) make sure that you have "Default uncontrolled communication device".
    (d) place a check on the speakers and headphones. Click on apply and OK.

    If the problem persists, follow method 3.

    Method 3:

    This occurs when you have the speakers, by default. We need to put the headset as default. Please follow the steps below and check if it helps.

    • Exercise the functions mentioned below to set the speakers as default.

    • Click Start and click on Control Panel.

    • Click sound, and then a new window will open.

    • In the new window click on the "Playback" tab and right-click in the window and click on Show disabled devices.

    • Now, check if the headset is listed there and right-click on it and choose activate.

    • To highlight this helmet and click "set as default".

    Also try to install the latest drivers from the chipset in the system and check if it helps.

    If the problem persists, follow method 4

    Method 4:

    I suggest you to refer to the procedure described in the article below and check if it helps.

    No sound in Windows

    http://Windows.Microsoft.com/en-us/Windows/no-sound-help#no-sound=Windows-7&V1H=win8tab1&V2H=win7tab1&V3H=winvistatab1&v4h=winxptab1

    Note: The above article will help you identify and solve its current problems in Windows, including no sound from your speakers or headphones.

    I hope this information is useful.

    If the problem persists, you can write to us and we will be happy to help you further.

    Thank you

Maybe you are looking for

  • Restriction code

    Hello I recently bought a new iPhone 6s and cannot reset my password of restriction (I only today learned that there was a restriction password and don't remember ever putting a). In any case, I tried to restore my phone to factory settings according

  • How to refine the products according to the requirements of the Satellite L850 series

    I would like to know how can I refine the products on this page: -. http://Gulf.computers.Toshiba-Europe.com/innovation/en/series/satellite-L850-series/1122205/ As you can see, the products on this page are so, and it's really a pain just traverse to

  • Bootcamp using 2 of my 4 hearts permanently?

    I have a MacBook Pro 2 GHz Intel Core i7, Yosemite 10.10.5 running. I think I have four total cores. I installed Bootcamp, but am running OSX. I would like to partition analysis on processors as much as possible. What Bootcamp using 2 hearts at all t

  • Scanning HP & Capture has a software IP different than the printer/scanner 7510

    I cannot scan to my computer (Windows 8.1) eitheer using the software HP Scan capture & on the computer or the computer function scanning on the 7510.  The IP address of 7510 is 192.168.1.112, but HP Scan software capture & he's trying to get to the

  • Check your upgrade fails

    Running Windows 10 pro.  Try checking to see how compatibile PC is for Windows 10.  I have the Windows Update icon in the taskbar.  GWX process runs.  When I HR click on and select check the status of your upgrade, upgrade Windows 10 window appears w