Can I set up my printer with USB port and wireless?

Similar Questions

• Can I set up a folder with many files and give only a limited number of people access? Just as in the old system.

  Can I set up a folder with many files and give only a limited number of people access? Just as in the old system.

  Hi oliviner,

  If you are referring to the workspaces, then yes it is possible but the service will be removed in January 2015

  If you are referring to files.acrobat.com, so if you can create folders and put the files into it, but you cannot assign access to specific people as you could in workspaces.

  Kind regards

  Rave

• How can I set up my printer with the internet to avoid the impression in this tiny print and language I don't recognize?

  I used to be able to print very well and then something happened and I don't know how to correct it. Not only, it prints in very small font and lettering I do not recognize but also wants to print many pages, that I'm not. Thx for all help to correct.

  Hello

  · What is the number and model of the printer?

  · You want to print Web pages?

  · Were there changes before the show?

  1 if the font is small when you print from Web pages, and then try to increase the size of the text on the Web page, change the size of text larger or largest.

  a. in Internet Explorer, open the Web page from which to print.

  b. on the view menu, point to text size.

  c. click the biggest or largest to enlarge the size of text.

  d. print the Web page again.

  2. you can also run the troubleshooter and check if that helps: printer in Windows problems: http://windows.microsoft.com/en-us/windows/help/printer-problems-in-windows

• Mac OS x 10.7 Lion prints with USB, but not wireless

  Hello

  Printer works wirelessly perfectly before the Lion, but after installation worked when connected with USB.  Rest of the Wi-Fi works very well, including my Macbook and portable woman with his printer.    Any ideas?   Thank you

  Can anyone other printing to the printer on the network? What can happen, is that the usb printer can be the default printer on your mac. Try to print and scan, remove the printer with the sign less bottom left, and it readd with the most. For the wireless, you find the Hello connection to add.

• Problem with USB port and touchpad satellite A135-S2386

  Welcome!

  Laptop Satellite A135 in Houston, I bought about a year ago, it was working fine until last Friday. All my USB ports stoped working. I have power to the usb ports, but Windows Vista recognize any tool that is connected to the computer. Only what I get is USB is not recognized, or something like that. The same situation is under Linux (ETCH Deiban), the USB ports does not.

  Another thing is touchpad. It does not at all, regardless of it's Linux or Windows. Stoped working in Sunday.
  I used the cd recorvery and reinstall Vista, but the problems still exist.

  Please tell me what to do with this problem.

  See you soon

  Hello

  If the problem persists after using the original recovery media is certainly hardware related issue. I recommend you contact the nearest authorized service provider. They check your laptop.
  Sorry, but I really don't think you can do it alone to solve this problem.

• How can I set up my printer to usb only

  Well I think that my printer is still under warranty, and the conect Wireless will not work. All happins corectly on my PC but the printer says it cannot conect to the internet. Now, everything I want to do is leave it on USB 100%. ICAN somthings like and some things I can't, but I did not understand how to configure it to use USB only. Can anyone help?

  What is the model of the printer? If there is a button on / off for wifi, just to press and turn off the wifi.
  If you have installed as a network printer on a computer, you must uninstall the software and install it again for usb connection.

• timed equipment digital input with usb port and windows

  Hello

  I have a data bus 16-bit I read in a computer windows laptop. There is a strobe data to tell me when to read the data I want. The STROBE will remain high for 1 time of speech to 10 Mbps (about 1 microsecond) the flow rate is much lower than the speed of the bus. I looked into the usb-6501 but it does not support hardware timing and mark will not work at this speed. Is there a usb device that will do it? Maybe a pc card? FireWire?

  Please don't send me to pages on device selection. I looked and I couldn't find what I think I want to.

  Thank you

  Charlie

  Hi Charlie,

  The sampling rate overall max for USB form factor is 1 ms/s or 1.25MS / s for a single channel. The box USB-6251 takes in a 16-bit input. For higher sampling rates, you will need to use a PCI or PXI form factor.

• Problems when printing with USB or wireless - offline message

  Hello world

  I use a HP ENVY 4500 with a laptop Acer Aspire laptop and a desktop computer HP Pavilion 500, both with an Intel i7 and Windows 8.1. Initially, I configured the printer to work with both PCs wireless. The wireless network is provided by the modem of my provider (Telenet), so it is not very strong I increased it with Devolo powerline adapters. Print is fine, only when I want to print more pages then 3 print job is stopped in the middle of page 4. I get a message that the printer could not print the document, and the page comes out half print. I connected my printer with a USB cable and configured to work with USB, but also wireless. But that Don t always works, today, I tried to print a document from Mozilla Firefox and it would not start. The printer can be used on both sides without choosing the connection?  Also I get the message that the printer is offline and cannot print the document, even if it's actually printing.

  When I open the doctor print & scanning everything seems to be ok wth the printer, no defects are detected. Wrong me?

  Hello @DenOuwe and welcome to the Forums of HP, I hope you enjoy your experience!

  I see that you run into connectivity errors.  I would like to help.

  I would recommend using this thread on missing/partial prints & printer offline on Windows 8/8.1. by @JERENDS

  Good luck and please let me know the results of your troubleshooting operations. Thanks for posting on the HP Forums!

• Printer LaserJet 4100: Should which cable I for Laserjet 4100 connected to the laptop with USB port

  I have the HP Laserjet 4100 printer. I bought a new laptop with USB ports.  What type of printer cable I need to connect the printer to my laptop? Is there some kind of printer cable adapter, or something else that will do the trick?

  I have the same question about my HP Laserjet 1100 printer.

  Thanks in advance for your assistance expected.

  If I remember correctly, the 1100 uses a cable "C", alias MicroCentronics.  Have never seen an adapter for that one.  On the 4100, you can get a USB to parallel adapter.  They are pretty cheap and available at most CESS (Consumer Electronics Super Store) as Best Buy.  Staples and OfficeMax/Office Depot should also wear.  Online is cheaper if you have time to wait.

  The thing with these USB converters is often must 'install' the cable first.  In other words, connect it to the laptop, then wait so he could install, then connect the printer.  Depending on your operating system and if you have correct updates that can be almost instantaneous, and you may not even see it pop on the screen.

  Best idea is that since these are obviously not portable machines, connect them to your router via a network card.  I had the 1100 years and used a cheap 170 X.  I know most recent are available which are faster.

  For the 4100, see if you can retrieve a Jet Direct 620 unit on eBay.  Probably less than $50 and sometimes even as little as $25.  Stay away from the 600, 510 or 615 cards.  Low or as the 600, they can leave your network open to hackers.  No need to get Gigabit cards as they will be well above what the 4100 can handle.

  Now, two of these old devices, processing power and memory can be a problem.  Never try to print documents online.  Save them on your laptop, and then print.  You will probably get communication errors if you print directly from IE or FireFox.

  If the 1100 does not die, not even worth fixing.  Put into a Fuser is a nightmare.  The 4100 will probably work for another 20 years if you keep to clean and replace the rolls before they cause jams.

• How can I set my default printer?

  my printer has worked fine since I installed it initially. Now today, it seems not to be the default printer. But I can't work on how to change default

  Original title: How can I set my default printer, I have office 2010, it was OK, but for some reason, it is by default.

  Hi MinnieTraynor,

  Thanks for posting in the Microsoft Community. It seems that you have a problem with setting the default printer on Windows 7. This can be very frustrating for you, and I appreciate the efforts you have put in. Let us work together as a team to get this number fixed.

  We start with a few questions-

  (1) what is the brand and model of the printer?

  (2) have you made changes on the computer?

  I would like more information about the issue.

  Method-

  I would have you look at the article-

  Change your default printer

  http://Windows.Microsoft.com/is-is/Windows7/change-your-default-printer

  In addition, I would have to see the article-

  Solve printer problems

  http://Windows.Microsoft.com/en-in/Windows/printer-problems-in-Windows-help#fix-printer-problems=Windows-7&V1H=win8tab1&V2H=win7tab1&V3H=winvistatab1&v4h=winxptab1

  We know if you need help. We will be happy to help you.

  Thank you.

• Got a 27 "monitor from Apple, with thunderbolt (error). My MacPro can't love at first sight. Apple won't bring back the monitor. Will using a USB 3 map and then using a hard drive with USB 3 and Thunderbolt works?

  Got a 27 "monitor from Apple, with thunderbolt (error). My MacPro can't love at first sight. Apple won't bring back the monitor. Will using a USB 3 map and then using a hard drive with USB 3 and Thunderbolt works?

  N ° you need a computer logic board which has built in Thunderbolt.

• Is it possible to plug a USB to my new iPad Pro, to transfer PDF files and some Jpeg files from the USB key with an adapter of lightning? If there is NO adapter, how can I get these files on the USB key and my iPad pro?

  Is it possible to plug a USB to my new iPad Pro, to transfer PDF files and some Jpeg files from the USB key with an adapter of lightning? If there is NO adapter, how can I get these files on the USB key and my iPad pro? I need these PDF files transferred my I touch pro. Any suggestions?  Please

  Thank you

  Mike Tingey

  The iPad does not support USB keys. There are some wireless flash drives that can be used, but not the classical records. I suggest you transfer files to a computer and their synchronization then back to the iPad via iTunes.

• not the case in the present site gives a phone number to explain my contract, I can move from one computer to another? How can I set up for printing to Adobe

  Not the case in the present site gives a phone number to explain my contract, I can move from one computer to another?

  How can I set up for printing to Adobe

  So far, it is not necessary for a person no-tech.

  If you have a normal single-user license or subscription, you are allowed to have two active facilities as long as you use only one of them for the software at the same time.  You can disable and re-enable them if necessary to install on another machine.

• A form of the APEX, the elements of the numbers go right margin.  If you change these elements to "view only", the margin moves to the left.  How can I set numbers to display with a right margin?

  A form of the APEX, the elements of the numbers go right margin.  If you change these elements to "view only", the margin moves to the left.  How can I set numbers to display with a right margin?

  You must use the attribute of the element of the element. Change the Horizontal/Vertical alignment to right.

  https://www.dropbox.com/s/gxn51e0steg482a/element.PNG

• Problem with the display of pictures of USB ports and CD player!

  I'm having a problem with my USB port and CD player.  I tried to put a USB stick and card reader in both slots USB and a CD in the CD drive, and whenever the prompt appears, as it did before, asking me what I would like to take.  In the box gray top of page it says "Windows can perform the same action whenever you insert a disk or connect a device with this kind of file:

  Photos

  What do you want Windows to do? »

  Then in the white box below, it is totally blank, without options, where, as he used to give me several options.

  Can someone help me please?  I would really appreciate that I have a photo tour to finish as soon as possible, and I need to get my pictures on the PC!

  Thank you very much!

  Hello

  · What is the service pack installed on the computer?

  · Do you have any software installed on the third CD burning?

  · Do you remember all the recent changes on the computer before the show?

  1. If you have any software installed on the computer of third-party CD burning temporarily uninstall the software and check the results.

  2. you can also run the Autoplay Repair Wizard and check if it helps. You can download the tool from the link below: http://www.microsoft.com/downloads/en/details.aspx?FamilyID=c680a7b6-e8fa-45c4-a171-1b389cfacdad