Can I transfer a file to Windows Movie Maker on a DVD?

Similar Questions

• I can't publish a file using Windows Movie Maker despite after every single step and instruction

  I use Windows Movie Maker c. 5.1. (Build 2600) on a computer running Windows XP Professional 2002, SP 3. I try to publish a movie file which is a revised version of a WMV file. In other words, the original file is a file WMV is 534 MB.  I am editing the film by dividing and by deleting scenes, adding transitions and titles.  I am able to save the file (for a WMM file) but impossible to publish the movie.  I checked that (i) the files are in the correct location, (ii) the file does not exceed the limit of 4 GB, (iii) the destination does not exist (I tried everything from my desktop to video files).  I tried every possible resolution and the file type.

  I would change the software of movie at this point if I had not invested so much energy and time behind this project.  Help, please!

  Hello not happy with WMM,

  You get an error message when you try to publish?  If so, what is it?

  One thing you might try is breaking your video into 3 or 4 smaller sections and see if they work / will be published separately.

  See you soon

• I can't copy my files to windows movie maker. When I try to copy them, I GET a POPUP STATING THAT PROBLEM OCCURRED. Windows Media did the same thing and I have service pack 3 so-called.

  MOVIE MAKER DOES NOT ALLOW ME TO IMPORT FILES TO CREATE A MOVIE. WHEN I create files to create a cd or a slide show with windows media player I have a popup indicating that there is a problem with my cd player or the idon't have a and there a burner cd, used it all the time so far.

  Hi I'mafteru.

  1. don't you make changes before the show?

  Sometimes no Microsoft programs running on the computer may cause this problem. Try the following steps:
  Step 1: Check if a non-Microsoft program is causing this issue
  see How to configure Windows XP to start in a "clean boot" State .
  b. restart the computer and check if the problem persists. If the issue is not persistent, then from the article, follow the method 1 and method 2 to find out if any program is causing the problem.
  c. Once you have found the culprit which is the program that is causing the problem, then uninstall it or reinstall once more to solve the problem.

  Note: Article, remember to follow 'steps to configure Windows to use a Normal startup state. "

  Step 2: Remove the unwanted registry entry
  a. see the CD-R or CD-RW drive is not recognized as a recordable device
  b. follow the steps in the article, and then restart the computer.
  c. check to see if the problem persists.

  Important: Modifying the registry incorrectly or remove will cause serious damage to the computer. It is recommended to back up the registry before you edit it.
  See How to back up and restore the registry in Windows

  For your reference: Movie Maker frequently asked questions

  Visit our Microsoft answers feedback Forum and let us know what you think.

• Impossible to import PowerPoint file in Windows Movie Maker - codec error

  I am tryping to import a PowerPoint file into Windows Movie Maker to burn it to a DVD, but I get a codec error

  Cannot import the file C:\Users\Karen\Documents\2009 Fundraiser\Yellow Rose 2009.ppt MWP because the necessary codec to play the file is not installed on your computer. If you have already tried to download and install the codec, close and restart Windows Movie Maker, and then try to re-import the file.

  How can I find this codec and install it?

  Blond highlights Hello,

  Thanks for posting in the Microsoft answers Forum.  Usually, when you try to play a video in Media Player if you do not have the right codec Media Player will automatically download and install the correct codec if it is available.  Since this is a Power Point presentation has video embedded in it?  If so, try to play the video file outside the Power Point presentation and Media Player will go out and get the correct codec if you are connected to the internet.  Here is an article from the Microsoft Knowledge base that explains Media player codecs and configuration to automatically download:

  http://support.Microsoft.com/kb/926373

  I hope this information is useful.

  Thank you

  Jack

  Jack
  Microsoft Answers Support Engineer
  Visit our Microsoft answers feedback Forum and let us know what you think.

• When you try to import a .mp4 file in windows movie maker, the program does not list the file when I search for it in his file.

  When you try to import a .mp4 file in windows movie maker, the program does not list the file when I search for it in his file.  Help, please.

  As I suggested previously, conversion to a format like
  . WMV before you import it into Movie maker may be the solution.

  The free Converter from Microsoft can be a place to start:

  (FWIW... it's always a good idea to create a system)
  Restore point before installing software or updates)

  Download Microsoft Expression Encoder 4 with Service Pack 1 (SP1) (freeware)
  http://www.Microsoft.com/download/en/details.aspx?displaylang=en&ID=24601
  (runs under WinXP SP3 / Vista / 7)

  When you install the program...
  Start Microsoft Expression Encoder 4
  (Start / programs / Microsoft Expression /)
  Microsoft Expression Encoder 4)

  On the "Load a new project" screen...
  Left click... "Transcoding project '...

  When the program opens, click on... File / import...

  (If at any time you get lost while browsing
  the program of... to... Window / active Reset
  Type or workspace... CTRL + SHIFT + R)

  Look for the file/s that you want to convert.
  (If files do not appear... open the fall
  window and choose... All files)

  Click (highlight) left the files and the left on the Open button.

  You can see the files in the "Multimedia content" pane

  In the right column... left click on the tab "Output"...

  Open the drop directory window and choose an output folder.
  (This is where you will find your converted file)

  On the left, click on the button "encode".

  Wait... video encoding CPU intensive and can
  be a slow process. It is always best if you do not have
  multi-task while files are encoded.

  Now... try import you again. File WMV in Movie Maker.

  More converters:

  There are to many converters available on the net...
  the following links are some examples. You can
  need to experiment to find the best result.

  Proceed at your own risk *.

  (FWIW... it's always a good idea to create a system)
  Restore point before installing software or updates)

  (1) format Factory (freeware)
  http://www.videohelp.com/tools/Format_Factory
  (the 'direct link' is faster)
  (the file you want to download is: > FFSetup270.zip<>
  (FWIW... installation..., you can uncheck
  'all' boxes on the last screen... even in this case, it may
  install the Ask toolbar on your system)
  (Windows XP / Vista / 7)

  First, you will need to decompress the file or just open the
  Drag FFSetup270.exe out of the folder
  and drop it on your desktop. To install left click.

  (2) Freemake Free Video Converter (freeware)
  http://www.Freemake.com/free_video_converter/
  (Windows XP / Vista / 7)

  (3) Koyotesoft Free Video Converter
  http://www.koyotesoft.com/indexEn.html
  (2000/XP/2003/Vista/Seven)

  (4) Sothink Free Video Converter
  http://www.Sothinkmedia.com/video-converter/
  (Windows XP / Vista / 7)

  (5) hamster Free Video Converter
  http://www.PCWorld.com/downloads/file/FID, order 155794, 4 pages, 1/download.html
  (Windows XP, Vista, 7)
  (If you choose Custom Installation
  You can uncheck additional modules you
  do not want to install)

  (6) quick Media Converter
  http://www.Cocoonsoftware.com/
  (Win XP, Vista, Win 7 Home Premium)

  (7) SUPER © Simplified Universal Player Encoder & Renderer
  http://www.videohelp.com/tools/Super
  (the download mirror site is faster) (Windows XP / Vista / 7)

  (8) Xilisoft Video Converter
  http://www.Xilisoft.com/video-converter.html
  (not freeware but receives good reviews)
  (Windows XP (SP2 or later) / Vista / 7)

  Good luck...

• Why can't I import songs into Windows Movie Maker?

  Whenever I have import an mp3 file into Windows Movie Maker, I find myself with an astronomically long mp3. When I open the properties of the mp3 out of the program (on the desktop or in iTunes), I get that mp3 is normal size (approximately 3-5 minutes long) but when I open porperties in WMM, it turns out be more close to 3000 hours.

  Try to convert MP3 files to WMA format
  before you import into Movie Maker.

  There are to many converters available on the net...
  the following links are some examples.

  Proceed at your own risk *.

  (FWIW... it's always a good idea to create a system)
  Restore point before installing software or updates)

  (1) format Factory (freeware)
  http://www.videohelp.com/tools/Format_Factory
  (the 'direct link' is faster)
  (the file you want to download is: > FFSetup270.zip<>
  (FWIW... installation..., you can uncheck
  ('all' boxes on the last screen)
  (Windows XP / Vista / 7)

  First, you will need to decompress the file or just open the
  Drag FFSetup270.exe out of the folder
  and drop it on your desktop. To install left click.

  (2) Freemake Free Video Converter (freeware)
  http://www.Freemake.com/free_video_converter/
  (Windows XP / Vista / 7)

  (3) Koyotesoft Free Video Converter
  http://www.koyotesoft.com/indexEn.html
  (2000/XP/2003/Vista/Seven)

  (4) Sothink Free Video Converter
  http://www.Sothinkmedia.com/video-converter/
  (Windows XP / Vista / 7)

  (5) SUPER © Simplified Universal Player Encoder & Renderer
  http://www.videohelp.com/tools/Super
  (the download mirror site is faster) (Windows XP / Vista / 7)

  (6) Xilisoft Video Converter
  http://www.Xilisoft.com/video-converter.html
  (not freeware but receives good reviews)
  (Windows XP (SP2 or later) / Vista / 7)

• Download iTunes files in Windows Movie Maker on a downloaded CD?

  Hey,.

  I'm doing a movie in WMM, and I tried to go into iTunes and import the music on a CD that I had already imported into iTunes. He gave me something the codec is not installed.

  For the record: I have already read the answer of Yes, and it does not help me because it was things I had not bought and downloaded from iTunes. These songs, I am trying to import came from a CD, I bought in a store and jumped in my computer. Any help? I'm relatively stupid when it comes to such things, so it would be easy, plain-English-non-tech-chamois terms useful.* *.

  Thanks in advance! (:

  pepper

  Hi, pepper,
   
  1. you try to import the music from iTunes to WMM (Windows Movie Maker)?
   
  The files you want to import into WMM should be supported by WMM else, you will get this error message.
  To better understand about codecs, see this link "Codecs: frequently asked questions": http://windows.microsoft.com/en-US/windows-vista/Codecs-frequently-asked-questions
  You can also use Windows Media Player to copy songs from an audio CD, check out this link for more information: http://windows.microsoft.com/en-US/windows-vista/Rip-music-from-a-CD
   
  To convert the files into iTunes to the WMM file format supported, see this link: http://support.apple.com/kb/HT1550
   
  For more information on "importing files into Windows Movie Maker: frequently asked questions" visit this link:
  http://Windows.Microsoft.com/en-us/Windows-Vista/importing-files-into-Windows-Movie-Maker-frequently-asked-questions
   
  I hope this helps.
   
  Kind regards
  Syed
  Answers from Microsoft supports the engineer.

• When I import a video file into Windows Movie Maker it plays Audio and video

  When I import a video file into Windows Movie Maker, it plays the video and no Audio how to import the video file so that it contains the audio when the time to line up? Help?

  Original title: when I import a video file into Windows Movie Maker, it plays the video and no Audio how to import the video file so that it contains the audio when the time to line up? Help?

  When I import a video file into Windows Movie Maker, it plays the video and no Audio how to import the video file so that it contains the audio when the time to line up? Help?

  Watch the video file. The last 3 letters represent the file format.

  Windows Movie maker only supports the following video file formats:

  Video files: .asf, .avi, .dvr-ms, .m1v, .mp2, .mp2v, .mpe, .mpeg, .mpg, .mpv2, .wm, and .wmv

  If yours is not on the above list, Movie Maker will have probel play.

  In this case, you will have to google for a free video converter and change the format of your video file to WMV. WMV format is the most reliable format for Windows. For the benefits of others looking for answers, please mark as answer suggestion if it solves your problem.

• Why can't I import mp3 files to windows movie maker?

  I get an error message "Cannot C:\Users\Paul\Music\iTunes\iTunes Music\Victor Johnson\Fire security Songs\03 Smokey the Bear.mp3 imported." frequently when you try to import tracks .mp3 to my Windows Movie Maker files. It doesn't make a difference if I buy these titles on Amazon or iTunes, or does it make a difference if I create an .mp3 version in iTunes until I try the import. Other titles will not simply import.
  What should I do to get these files to import?

  Hello

  MP3 can sometimes be problematic if convert WMA and then import them.

  Of many freeware converters
  http://www.MP3-Converter.com/mp3_converter_freeware.htm

  Free Mp3 Wma Converter V1.81
  http://koyotstar.free.fr/indexEn.html

  Free MP3 WMA WAV Converter
  http://www.nbxsoft.com/MP3-Converter.php

  Plenty of capable edition

  Audacity - free
  http://Audacity.sourceforge.NET/

  Free Audio Editor 2011 - free
  http://www.free-audio-editor.com/

  Other sources of information:

  http://Forum.recordingreview.com/

  http://www.djforums.com/forums/

  http://Homerecording.com/BBS/

  http://www.pcmusicstuff.com/

  ================================================

  My friend John Papa - MVP - is the expert on Windows Movie Maker.

  PapaJohn.org
  http://Papajohn.org/

  PapaJohn - online tutorials
  http://www.Papajohn.org/mm2-online-tutorials.html

  Windows Movie Maker Tutorials - check the sounds of the addition in the left menu and others on the
  main screen.
  http://www.windowsmoviemakers.NET/tutorials/

  Windows Live Movie Maker that works on Vista and Windows 7, see the link under Windows Live Essentials.
  http://windowslivehelp.com/

  Windows Live - Movie Maker Portal - official support Site - see also the Forums of the right part of the page
  http://windowslivehelp.com/product.aspx?ProductID=5

  ====================

  These might help:

  Getting started with Windows Movie Maker

  Import video, photos and audio on Windows Movie Maker

  Import video from a videotape

  Get a movie in Windows Movie Maker

  Make a movie quickly in Windows Movie Maker (AutoMovie)

  Publish a movie in Windows Movie Maker

  I hope this helps and happy holidays!

  Rob Brown - Microsoft MVP<- profile="" -="" windows="" expert="" -="" consumer="" :="" bicycle=""><- mark="" twain="" said="" it="">

• I can't save my project (mswmm) file on windows movie maker 5.1 as a video file

  Hello
  I worked on a project to create a movie about 500 MB with windows movie maker, but when I try to save as movie on my computer, I am unable to save him, while the CPU usage is 100% and windows movie maker says, "estimated time remaining" for about 15-30 min and projects then a mistake. I checked my files several times that are ok, but... .can not save my project. My system configurations are provided for in:
  P - IV - 2.4 GHz processor
  512 MB of RAM
  Graphics 128 MB
  Is that what I need to improve my system or there is another problem? I will be grateful if you could suggest any remedy, please. C

  Here is how to divide a movie complex in small projects
  http://www.myvideoproblems.com/tutorials/MovieMaker/SplitComplexProject.htm

  How many records you in the project?
  Are what kind of file all?

  MM do not like certain types of files, and it appears when you come to save the movie, this tells you what types of files are better use
  http://www.myvideoproblems.com/tutorials/MovieMaker/File_type_compatibility.htm

• I am trying to load a MPEG file into windows Movie Maker 2013 and load only the audio part. What can be done to fix this

  I have MPEG files that I'm editing and when I load in Movie Maker only the audio part load. During loading, I get the following message at the bottom of the screen for the audio to load but when that ends more nother is responsible and the screens indicate only the audio track.

  Hello friend. I know that windows movie maker supports wmv video well, you can convert your videos to wmv mpeg video for a trial, it should work. If you don't know how to convert a video, this video converter will help you a lot.

• Is there a limit to how much the music of mp3 files, you can add to a project in windows movie maker?

  I have a total of 11 mp3 files that I need to add to this photo film and I have 10 mp3 files already imported, but it won't let me add the last of them.

  Hello

  You can follow the steps in this link & check if the problem persists:

  Unable to import the MP3 file to the Windows Movie Maker project

  Note: Using third-party software, including hardware drivers can cause serious problems that may prevent your computer from starting properly. Microsoft cannot guarantee that problems resulting from the use of third-party software can be solved. Software using third party is at your own risk.

  Hope the helps of information.

• How can I insert an mp3 music file in Windows Movie Maker?

  How can I insert an MP3 of the music on Windows movie maker film?  I downloaded this song three times from Amazon.com... the file is fine.  Yet, when I'm in Windows Movie make and attempt to insert of the song, I get a message saying that the file is invalid or damaged.  The file is fine.  I'm able to import OTHER songs without problem to my film.  BUT I want this song in particular one and can't make it work.

  Convert MP3 to WMA format before importing
  in Movie Maker and you should have a better result.

  There are many freeware converters available on
  the net... the following examples may be worth a try:

  (FWIW... it's always a good idea to create a system)
  Restore point before installing software or updates)

  * Proceed at your own risk *.

  (1) format Factory
  http://www.pcfreetime.com/
  (the file you want to download is: > FFSetup270.zip
  (FWIW... installation..., you might want to
  Uncheck all of the boxes on the last screen)

  First... after the download and installation of Format
  Factory... you can open the program and
  left click on the toolbar, the "Option" button and
  "Select an output folder to" / apply / OK.
  (this is where you find your files after they)
  are converted)

  Drag and drop your MP3 files on the main screen...

  Select "while"WMA"/ OK...

  Click on... Beginning... in the toolbar...

  That should do it...

  Here's another free download:

  (FWIW... it's always a good idea to create a system)
  Restore point before installing software or updates)

  (2) Koyotesoft "Free MP3 WMA Converter".
  http://www.koyotesoft.com/indexEn.html
  (FWIW if you install the converter, you can
  Uncheck offerings from Yahoo and Dealio) (also... you
  may want to uncheck the CD Ripper and the Easy
  MP3 Cutter)

  After installing the program... open and drag and drop
  your audio files on the main screen...

  Choose a backup folder (path of output). Or just leave...
  "Save to the directory the file" checked and the new
  files will be saved in the folder with the current files.

  Choose a format... WMA.

  Left, click Convert.

• My new Windows 7 live Movie Maker is not recognize my old files to windows movie maker (xp). How can I fix this?

  I had some movies from my child on my old windows xp system and computer scientists transferred all my data from this computer to my new which runs windows 7.  The new live version of movie maker won't recognize my files.  How can I fix this?

  I had some movies from my child on my old windows xp system and computer scientists transferred all my data from this computer to my new which runs windows 7.  The new live version of movie maker won't recognize my files.  How can I fix this?

  ==================================================
  This happens when the former projects include transitions and effects which are
  not included with Windows Live Movie Maker.

  Best bet IMHO... create new projects, or install earlier versions of Movie Maker.

  See the following articles:

  5 versions of Windows Movie Maker in Windows 7
  http://www.brighthub.com/multimedia/video/articles/25282.aspx

  Windows 7 - XP Movie Maker 2.1 edition... but in Windows 7
  http://www.brighthub.com/multimedia/video/articles/28935.aspx

  Volunteer - MS - MVP - Digital Media Experience J - Notice_This is not tech support_I'm volunteer - Solutions that work for me may not work for you - * proceed at your own risk *.

• I can't open a file MPG on Movie Maker for Windows 8

  Hello

  I m experiencing some difficulties to open a file MPG on Movie Maker for Windows 8. The file shows as if she was "inserted" in the timeline, but I can´t play or edit. I have no problem in reading the file on Windows Media Player, it s just the Movie Maker who does not read correctly.

  Any ideas on how to solve this problem?

  Thank you

  Hello Jordan,.

  Thank you for your response.

  I appreciate your time and patience.

  I suggest you post your question on in the Windows movie maker forum.
  http://answers.Microsoft.com/en-us/windowslive/Forum/MovieMaker?tab=threads

  Thank you