Can I use a power adapter that provides the samilar voltage but a different amperage?
Hi all
The specs for my original AC of a dv6-1355dx adator are:
Input: 100 ~ 240 V, 1.6 has, 50 - 60 Hz
Output: 18.5 3. 5 a, V
756
The plug of the adapter nearest you, that I could find online of dv6 is:
Input: 100 ~ 240 V, 1.5 has, 50 - 60 Hz
Output: 19 V 4.74
90W
Can I use it to replace the original one?
Thank you so much and have a nice weekend!
Yes, the HP Pavilion dv6-1355dx Entertainment Notebook PC comes with power adapter 65W.
http://support.HP.com/us-en/document/c01893242
The 90W AC adapter / you provided has no problem as long as the part fits, there are only two sizes (4,5 and 7. 4 mm).
To ensure that you get the compatible adapter, take a look at the
HP 65 w Smart AC adapter
For HP laptops with connectors 4.5 mm or 7. 4 mm
http://www.shopping.HP.com/en_US/Home-Office/-/products/Accessories/AC-adapters/G6H42AA?HP-65W-smart-AC-adapter
Here are the following features and benefits to get the Smart AC adapter. Smart cards can improve your productivity by feeding your computer laptop while that plugged in, as well as the charge of your battery so that you can take your laptop with you when you disconnect. HP Smart adapters also have built-in overvoltage protection to protect against current fluctuations that can damage your laptop. Help HP Smart adapters you can save on materials, energy consumption costs and travel.
Tags: Notebooks
Similar Questions
-
can I use AC POWER ADAPTER RESTENT CONNECTED on MY PORTABLE EVENAFTER COMPLETELY CHARGE
MY PC HP COMPAQ NOTEBOOK IS 15 SERIES. HOWEVER, MY DOUBT IS A COMMON A REG ADAPTER FOR LAPTOP.
WHEN IN THE HOUSE, I USE ADAPTER CONNECTED TO LAPTOP EVEN AFTER FULLY CHARGING THE BATTERY SO I THINK THAT THE LAPTOP TAKES PWER OF HAND RATHER THAN BATTERY SO THAT THE ENERGY OF THE BATTERY IS STORED FOR USE OUTSIDE THE HOME. I THINK THAT IT'S GOOD PRACTICE. HOWEVER, I HAVE A QUESTION ON THAT. While KEEPING the ADAPTER STAY CONNECTED EVEN AFTER FULLY supported, y at - IT NO PROBLEM FOR THE BATTERY, I have AVERAGE IF is there CHANCES OF OVERCHARGING THE BATTERY AND CAUSING DAMAGE to THE BATTERY OR IS IT ALL MECHANISM THAT PREVENTS OVERCHARGING of THE BATTERY OF MY 15-S001tu COMPAQ NOTE BOOK.
PL ADVISE ESPECIALLY IF WHAT I DO IS JUST OR NOT.
Best regards
DEKHILI
What you're doing are OK, if you still use your laptop as a mobile device and not as a replacement of permanent office.
Modern laptops won't let not the battery overload. If the color of the white led charge\power then it is no longer supported. If it's orange, then it reloads.
If a laptop is used as a permanent replacement office and always stay connected, so the best plan would be to remove the battery and store it in a cool place. Plug the power adapter and use it as your desktop. There are a number of schools of thought on the State of charge of the battery must be stored. As long as you use the laptop with the battery from time to time and let it load, the battery must remain in good condition for at least a few years.
-
To measure the pressure using a pressure transducer that provides the analog current output 4mA-20mA
I wanted to acquire the current analog signal which varies from 4-20mA using NI 9207. I tried in 2 ways.
method 1 - created an input channel current analog & used a reading Vi to acquire it. How can I give the channel connections in this...
method 2 - using NOR-DAQ Assistant, I put the channel connections and I got Amplitude versus time graph. She also gave negative values. Can I do this way which is easier? How can I solve the problem
First attachment belongs to the 1st method
Second attachment belongs to the 2nd method
-
I try to use a square twice side by side on my site, and they are sensitive, but as they have a different amount of content in them, they are different height. How do I make them the same height so they dimensionnera always evenly?
Here is an example of what I want to do.
Here is the css and html I use;
. Half-width {} content
Width: 50%;
Float: left;
Max-width: 675px;
Max-height: 338px;
}
. {Texthalf}
Width: 80%;
height: 80%;
margin: 10% 10%;
}
< div class = "Half-width-Content" style = "" background-color: # 2793 3; ">"
< div class = "Texthalf" >
< h1 > < font color = "White" > did you know? < / police > < / h1 >
< hr > < / h >
< h6 > < font color = "White" > Hacel has combined 100 years of experience in the lighting industry < / police > < / h6 >
< hr > < / h >
< / div >
< / div >
And this is what I get now;
Thank you
First - make sure you include a link to the jquery library in your page head tags:
And then paste the code I provided after him.
-
Satellite Pro C660-16F: power adapter that is compatible
Hi all
I recently lost the charger of my Toshiba Satellite Pro C660-16F.
It provides the output DC 19V - 3, 42A
My father also has a Toshiba Satellite, model A300 1RF
Supplies of its DC 19V - 4, 74A Chargers
I don't know if I can use the charger of my father for my computer, like I don't know
If it is just the current or excessive current it can cause damage.Can someone give me the answer to that?, thank you very much in advance!
Hello
You can use another adapter 19V.
The value of the Volt is very important. You can ONLY use the power adapter that supports the 19V
The ampere is too important, but it may be a little different.Your original adapter supports 3.42 Ampère and other 4.74. It's a little higher but not really relevant.
-
Satellite A200 - where can I find a power adapter?
Hi guys,.
Need help to find a power adapter that would work with my laptop Satellite A200. Any help would be great.
Thank you
Aaron
Hello!
You can get these adaptors and other parts of an authorized service. On the Toshiba site, you can search the nearest.
You can also see the Toshiba site for compatible adapters:
http://EU.computers.Toshiba-Europe.com-online services & devices-online Options & accessories PC-online PC Options & accessories HomepageGood bye
-
Can I use Cyberlink Power Director to transfer vhs to dvd? Thank you very much.
Hello
No, unless your computer has a capture card. I used the following device:
Kind regards.
-
How can I use an ipod nano that was synched to another computer?
My daughter gave me his 2nd generation ipod nano because it is no longer use it. When I plugged in my USB to load, I got a message informing me that there is an update. It would not be updated beause "ipod cannot be updated because it contains files that are used by another application."
What should I do to be able to use this ipod nano?
I don't think that this message is related to the iPod is synced to another computer... It is usually other applications or processes on the computer (which is not iTunes) accessing the iPod for some reason if iTunes is not able to perform the update. However, your question in the subject heading ("How can I use an ipod nano that was synched to another computer?") is valid, since the iPod was previously used by someone else, with a different iTunes library.
If you want to start using this iPod with your iTunes library and put on your songs, instead of doing an Update, you need to restore. This erases the iPod, reinstalled the latest version of the software, and sets it to the default settings. The iPod gets a 'new beginning', as when it was new. To resolve the problem with this "files in use by another application" error message, try restarting your computer. Immediately after the computer finishes starting up, run iTunes, plug in the iPod (if it isn't already) and try to do the restore (or Update). If you still get this error message, please after return.
If you are restoring, you can configure it to sync with your iTunes library. You can post back, if you need advice on options for the implementation.
-
Can I use arrowheads and be in numbers the the custom shape set come with photoshop in graphic design that will be put on Youtube or social networking?
Hi albert xu,.
Greetings!
Yes, you can as this is why photoshop is intended.
You can use and create designs and post that publicly.
Concerning
Jitendra
-
Can I use PXI embedded controller connected to the PC under LINUX operating system
Hi all
We ara tries to connect to PXI8106 (in 1042 chassis) to PC under LINUX via ethernet (cable cross at the moment), is the version of labview 8.5.
Can I use PXI embedded controller connected to the PC under LINUX operating system?
If Yes, where can I find its configuration in the .ini file?
Thanks in advance.
Hello bachir_elec,
I'm sending you two links that I don't provide the information you need.
Using Linux on an Embedeed PXI controller:
http://digital.NI.com/public.nsf/allkb/821E0C115A3B4EF286257069004B8352?OpenDocument
Configuration of your PXI Linux system:
http://digital.NI.com/public.nsf/allkb/5CEEC941FB7B0488862573F700653B21?OpenDocument
You can take a look?
-
When I open a tab/icon on my computer is much too large for my screen and I can't use my computer; 3 boxes at the top right corner with the-, square and X are too far to the right to do anything. How can I fit on my screen, so I can use my computer?
Hello
Please contact Microsoft Community.
This problem is limited to any icon or it happens with all?
Did you change to the computer?
I suggest to refer to the following methods and check to see if it helps:
Method 1:
Install the latest display driver and check
Uninstall the driver from Device Manager display.
a. close all programs. This will ensure that the programs do not interfere with the update of the driver.
b. right-click on my computer, and then click Properties. This will bring you from the System Properties menu.c. click Device Manager
d. expand the display column of cards by clicking on them. This will show the graphical current map that is using your computer.
e. right click on the adapter, then select Properties.
f. click on the driver tab. This tab displays information about the current driver, as well as options to update, delete, uninstall, and back the driver.
g. click on uninstall
h. restart the computerYou can install the latest display driver for download on the site of computer manufacturing, same driver will reinstall automatically after the restart, if the computer is connected to the Internet.
Method 2:
I suggest you try the system restore. Restore the system to a restore point when your computer was working fine
You can also check the Device Manager to see if the video card has a yellow exclamation on it with an error any:
http://Windows.Microsoft.com/en-us/Windows7/products/features/device-management
I hope this helps.
Kind regards
Anusha -
Can I use an I tunes card for the mini game on my I pad?
Can I use an I tunes card for the mini game on my I pad?
You should be able, unless you're an Organizer from family to family sharing (an organizer can not use gift cards). Buy the card on your account (this is the account that has downloaded the games on your iPad?): Redeem iTunes and Apple music gifts and codes - Apple Support
Purchases should automatically use the balance of your account
-
Can I use an air2 iPad to sync the music on my iPod nano?
Can I use an air2 iPad to sync the music on my iPod nano?
Is ther a clot that I can use, lightning to USB, this music of sync word for my iPod nano 7th generation.
N °
There is no way to synchronize different iDevices between them.
I'm sorry.
-
What key combination can be used to capture a screen to the Clipboard? __
What key combination can be used to capture a screen to the Clipboard?
http://en.Wikipedia.org/wiki/screenshot
In Microsoft Windows, pressing the button print screen capture a screenshot of the whole office and put it on the Clipboard. Pressing the combination Alt - Print Screen captures only the current active window. In most versions of Windows, captured screenshots do not include the mouse pointer.
Video content in the programs using a hardware overlay video converter is not captured by the method described above. Windows Media Player on Windows XP in its default configuration on supported hardware is affected by this. However, some third-party applications can capture overlay images.
By default, Windows does not record the screenshot to an image file; the user is required to paste the image into a separate program (such as Microsoft Paint, which is integrated) imaging for the economy. Some programs, however, especially online multiplayer, will automatically save screenshots in a specified folder. From Windows XP (or any version based on Windows NT), it is no longer possible to take screenshots of windows DOS full screen without other software.
Windows Vista and Windows 7 include a utility called Snipping Tool, first introduced in Windows XP Édition Tablet PC. This is a screen capture tool, which allows you to take screenshots (called snips) of windows, rectangular areas, or a free-form area. Shears tinsmith can then be annotated, saved as an image file or an HTML page or by e-mail. Unfortunately, it does not work with uncompressed, XP versions but represents an XP compatible equivalent.
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
http://en.Wikipedia.org/wiki/Print_screen
In Microsoft Windows, pressing print screen will capture the entire screen, while pressing the alt key pressed in combination with the screen print will capture the selected window. The captured image can then be pasted into an editing as a word-processing, electronic mail, or graphics softwareprogram. On the keyboards that have a caps lock key, you may have to press lock first. Pressing print screen, with the alt key and the SHIFT key pressed, turns on a mode of high contrast for people with visual impairments.
See you soon.
Mick Murphy - Microsoft partner
-
Can I use MSTSC to connect remotely on the internet?
Can I use MSTSC to connect remotely on the internet (local computer is Vista Ultimate SP2 to a distance Win 2003 Server)? I used MSTSC on my local network and it works well.
Hi Ibaltsae!
Thanks for posting. Yes, you can use MSTSC to connect remotely to a computer or server on the internet, the same as if you were using your local network. To connect to the remote computer, use the DNS or public IP that are associated with name.
I hope this helps! Shawn - Support Engineer - MCP, MCDST
Microsoft Answers Support Engineer
Visit our Microsoft answers feedback Forum and let us know what you think
Maybe you are looking for
-
How can I stop my history tab to open when I click on a link that opens a new window?
Whenever I click on hrefs lately, the new window opens with the historical pane open. I can't figure out how to disable this.
-
Measurement of voltage deferred with a start from a pulse TTL (PCI-6251, OR DAQmx)
Hello What I do: gain a measure of tension after a certain period of time (order of microseconds) when we observe a TTL pulse, lasting about 1-100 microseconds. What are the options I to do thins? PS. If this problem is solved in a C code example, pl
-
I can't uninstall a program from my laptop HP Pavillian?
Well, I want to uninstall this program Emusic Manager to my laptop but cannot. I tried like 5 times, but nothing happens. I finally use the Task Manager to click out. And Yes, I tried using programs to remove this program too. Have you ever had this
-
Can not watch DVD after modernization of Windows 8
I have a HP Pavilion m6-1010tx Entertainment Notebook PC and have upgraded to Windows 8 and can not watch DVD now. What can I do?
-
I had her work on my pc and then it stopped - I did a system restore to the date he was and everything worked fine, but not internet (strange), so I move the date forward for other systems of restoration, and it gave me no sound, but internet worked.