Can I use as a point of access Wireless-G broadband router?

Similar Questions

• Can I use my Satellite P10 as Access Point?

  Satellite P10 wireless access point

  Please can someone help?
  I have a laptop wireless by Satellite P10, can anyone tell me is it possible to set up the laptop to share my Internet remotely even if its WiFi, so it can be picked up by my Sony PSP. Then my cell phone would act as a wireless internet access point.
  As I do not have a router, don t know if it is possible this way any ideas?
  Thank you Michael.

  Hi Michael

  Well, I m not sure if it of possible the Sony PSP to connect to the laptop and if it works, but I found several useful information how to create make it the network connection wireless home in Windows XP without a router. Please check this links.

  http://www.Microsoft.com/windowsxp/using/networking/expert/bowman_02april08.mspx

  http://www.annoyances.org/exec/show/ics_xp.

  Good luck

  Good bye

• The Torch 9800's BlackBerry Smartphones Can be used as a mobile Wifi access point

  Hello

  I just got a Torch 9800 with a great data plan; Anyone know if the phone can be used as a hotspot Wifi for a PC?

  N ° the Torch 9800 can't be upgraded to OS 7.1, which is the oldest version of the OS with function Hotspot Wi - Fi.

  I hope that helps you.

• I need to access sites that require adobe flash player on the iPad.  What can I use to allow me to access?

  I need to access sites that require adobe flash player on the iPad.  I can access these sites on my imac with adobe flash player then why not on my ipad.

  What can I use to allow me access to these sites, which are for educational purposes for my grandson to allow him to do his homework?

  While you can get Adobe Flash on the iMac, you can't be on the iPad. There are some browsers in the App Store that will emulate flash, I think that one of them is atomic, or something like that. Do a search on the App Store and you should find something.

• the button apply accentuates not when I try to create my own Restore Point, so I can't use restore given points which do not go far enough

  I don't know what to use as a "description".

  Hello

  You can not today create the Restore Points for a day or a week or a month there in the past.

  They have already been created by the system to the previous date, or they do not exist.

  You cannot create a Restore Point for a date that is already passed.

  Here's how the system restore works:

  You use the system restore to create a Restore Point for today (or the system does this automatically), so if you have problems to say a weeks time, then to restore beck date of the date and time using the Restore Point that has already been created today...

  See you soon.

• I can't use my mouse pointer in windows 64-bit vista Media Center

  My mouse does not work in windows vista media center. I use the tab buttons, arrows, and the rnter buttons to get it to work but not the mouse. Is it possible to get the mouse working? I move the mouse, and if by chance I managed to get the pointer of the mouse under a button he highlites and I can then press the mouse button and it will work, but the mouse pointer is invisible.
  Is it possible to put the mouse in sight?
  Thank you for your help
  Whenever I use (64-bit) windows vista Media Center after it starts I can't use the mouse to move from one element to the element. I need to use the tab key, arrows and enter to do anything in media center. Is it possible to get to be able to use my mouse?

  Among other things, this suggests to disable 'Traces of the mouse', if you have it on might work.

  Tutorial Vista - the mouse cursor disappears in Media Center
  http://www.Vistax64.com/Vista-General/34749-mouse-cursor-disappears-Media-Center.html

  When Media Center is open, the mouse disappears in Vista Ultimate (RTM)
  http://forums.techarena.in/Vista-music-video/678304.htm

• Can I use a USB keyboard (cable or wireless) with my KDLNX810 TV?

  My Sony KDLNX810 USB ports, it can be used with a USB cable or a wireless keyboard? I tried with a wireless keyboard and access to youtube, without success. Is there a driver or something that needs to be configured? Or it just doesn't work?

  I also tried to find a remote control (iphone) app, but have not found a for this model.

  Thank you

  Hello Duane,

  Welcome to the community of Sony.

  Wireless keyboards are not compatible with the TV.

  However, you can use the 101 wired USB keyboard keys with the TV.

  This TV only has not the function distance media. Therefore, it can be controlled using the remote application of media.

  Please mark it as "acceptable Solution" If you find this information useful.

  Kind regards

  Colby

• Equium A100-147: can I use an external mouse wired or wireless

  Hi just bought an A100-147, anyone knows if I can use an EXTERNAL MOUSE wired or wireless

  Hi Peter,.

  You should, as far as I know, be able to use two types of mouse; I know that many people find it more natural and easier than the mouse pad integrated, but that is purely a personal preference.

  A wired mouse plug directly into a USB port or a round PS/2 port, check the ports that you have before you buy anything, but you should have no problem with USB.

  Use of wireless mouse a small receiver which plugs into a USB port and would be normally equipped with software to run it.

  I hope this helps.

  Weezle

• Can I use VM 2nd NIC to access target on the storage network?

  I'm running ESXi 4.1 on an isolated network iSCSI network storage with 1 NIC physical on the management network, 4 physical network connected to the Production network interface cards, and 4 NIC physical and all my VM is Server 2008 x 64. Until the budget will allow, without my actually are Dell PE 2900 of servers running Windows Server 2008r2 and Microsoft iSCSI Software Target 3.3 with various sizes of PowerVault DAS, which is 15 to. Here's my question regarding this configuration. The environment in which I work in requires the use of an application that needs the access card to a server that has more than 10 TB of structured of maps and images. For the sake of future growth, I decided to go the normal way of iSCSI target as opposed to sharing/server configuration, so I created a 14.5 TB iSCSI Target .vhd and all my data have moved to this location. In addition, I have one of my servers iSCSI Initiator pointing to the target VM (exported snapshot)... through my network of production... where it is mounted as a read-only disc, configured as I need to be and spread my desktop map. This configuration works well, but the fact that my VM accesses the target via my production network is certainly not the way I need it to be installed, I really need to access the network storage iSCSI initiator. Confused yet? I really need to keep my out of the Production Network iSCSI traffic, but so far I have not been able to find a method to add a second NETWORK card on my virtual computer and put it on anything other than the VM network. I have no problem at all with my host ESXi accessing iSCSI target data warehouses that I created on my other AD, but obviously, there are enormous obstacles to the creation of a 14.5 TB data store, while a 14.5 to SAN target is very flexible and easy... now how can I shoot by the storage network team.

  I appreciate the answers really, but I'm composing this House as VMWare communities are blocked on my work network. However, given that the responses are also sent to my email... I will receive them as text and therefore all references to added images etc will have to wait until I get to watch. Answers appreciated text.

  Thank you

  Confused yet?

  Yes, absolutely

  I don't know if your configuration iSCSI in detail, please consider my suggestion carefully. Access the iSCSI virtual machine network directly should be as simple as adding a group of ports 'Virtual Machine' to iSCSI vSwitch and adding another virtual NETWORK card on the computer virtual - attached to the newly swanky group harbour - with an IP address in the range of iSCSI.

  André

• How can I convert a 3 mV/V to a load cell signal to something I can read using a field point AIO-600?

  I use an external powere supply 12V to supply voltage to the load cell, and I'm reading data using AIO-600. There is a separate module that can do this, but is it possible to do it with the current material?

  Russell,

  The lowest input for the AIO-600 range is 0 - 6V.  This means that you will have a resolution of 12 bits (11.3 effective) broadcast more than 6 volts.  I guess that your full scale signal max will be 36mV.  Without amplification, you will not have a very high quality signal.  It would be the best bet to amplify your output signal mV as close to the load as possible cell and then connect this signal amplified to your AIO-600.

  Best,

  Chris LS

• How can I use the hotkeys digital w / Apple wireless keyboard?

  Hello world

  I bought a keyboard, Apple Magic for my Late-2013 MacPro running Adobe Premiere.  Newer versions of first and OS X.

  The wireless keyboard is shorter than the extended keyboard and so does not have the numeric keypad on the right, but also of the other keys like 'Home' and 'Page Up'.

  I found ways to replace by 'Home' and 'Page Up' using combinations such as FN-(left arrow) Fine.

  But how to get back the possibility of type "+ 24" in the Source or program monitor to move the 24 images?  Alternatively, a more useful tool for the editor, go directly to a specific image by typing the timecode?

  First does not recognize these shortcuts from the digital keys that are in the top row, on the letters.

  I really miss this feature.  Before I give up on my wireless keyboard, I wanted to see if someone knows how to make these critical shortcuts for me.

  Thank you!

  Joe

  End of 2013 Mac Pro

  OS X 10.11.4

  64 GB OF RAM

  Premiere Pro 2015.2 release, 9.2.0 Build (41)

  Here's an update: I called Apple, and the solution is another piece of material: Belkin YourType wireless keyboard.  It's another Bluetooth keyboard which adds the keys I've been missing.

  So basically, if you want to use the first (or most other change programmes, I guess) with a wireless keyboard - you need two.

• I can't use assistant wireless hp on my pavilion dm1 help please!

  I own a HP Pavilion dm1-LQ862PA #UUF, windows 7-64 bits, a few months ago, my HP wireless assistant not working with a screen saying "HP Wireless Assistant is not available. application is now closed. I ignored it because I can use internet then I discovered that I can't use bluetooth. I checked the Device Manager and there is no installed bluetooth. I can still use the bluetooth before the broken wireless assistant. Please help me thanks

  Have you tried to reinstall the wizard without wire of your recovery manager or support page?

  If you do not need instructions, post again. If reinstall you, uninstall your present. You'll find "Programs and features" in the control panel.

• A WRT160N V3 can be used as wireless access point.

  I have an AT & T's broadband router.  A WRT160N is connected, so I now have Wireless N capabilities.  I have a second WRT160N I want to put in my living room as a point of access, so I can connect my BluRay player and video stream.  How can I configure the second WRT160N as access point?

  Thank you in advance,

  Andrew

  Topic 1. Yes, you can use your second WRT and put in place as a second access point to your network. First of all, unplug the second WRT to your network and wire a computer in one of its LAN ports. Open the web interface at http://192.168.1.1/ on the main configuration page, change the address LAN IP of 192.168.1.1 to 192.168.1.2 and disable the DHCP server. Save the settings. Unplug the computer and connect the cable to the first router on one of the second router's LAN ports. Do not use the internet port of the second router! Now you can use the wireless access point in the second router as access point additional for your network.

  For a wireless roaming the two Wrds with identical wireless settings (SSID, wireless security, etc.) and don't forget to enable the SSID broadcast. Only the channel assignments should be different. Different channels spaced at least 5 avoids duplication of canals. Now your laptop can connect to your network via either WRT and internet through the first WRT. It must also be able to move between the two Wrds without losing the connection.

  Re 2. Because the WRT160N has only the ethernet 10/100 ports a CAT5e cable should do. Of course, you can consider getting a better cable, for example a cat6 for future enhancements to your network. It depends on how much effort it is necessary to replace the cable later if you decide to go for gigabit ethernet on your local network.

• Can I use a WAG354G as access point

  I have a cable modem and a wired router. I also have a spare WAG354G when I had normal ADSL. Can I replace the router with the WAG and just use the other 3 ethernet ports and wireless so just use it as an access point? If so what settings do I or do I have to buy a dedicated router ap instead? TIA

  No you can not use this router as an AP with your Modem cable.

• can I use same address pool of policies and groups of different remote access VPN tunnel

  Hi all

  I want to create an access remote VPN in ASA different profile. IHAVE a RA vpn already configured to achieve a purpose.

  can I use the same ip address pool used to that existing for the new tunnel-group (to avoid adding rotuing on internal devices for new pool) and it is a temporary condition)

  Thanks in advance

  Shnail

  Yes, the local filtering on the SAA will be perfectly fine. My point of view with different pools is based on customer requests where later after some time, the requests came to distinguish the VPN-users group on servers and so on. For another client, I had to implement filtering on an internal firewall where the VPN gateway (which was out of our control) uses a de.100 pool-. 200. And it's a PITA, if the pools are not aligned on subnets.

  But anyway, your solution will work.

  Sent by Cisco Support technique iPad App