Can I use charger property on a main sequence to load the properties in the subsequence?
Hi, I tried to use the shipper of the property to load limits and variabels local values in subsequences of the main sequence.
I can export all properties for my main sequence and all subsequences in the export function within selecing
When I try to load the file exported by using the property loader I get different errors depending on the format, with that I imported/exported. For the error of iget text files or csv-17100 "The file format is incorrect near 'StationGlobals' section. Make sure you use start and end markers correctly. » To get an xl format I get error - 18 "Stage of charger property has no import or export properties. 43 property values were imported from 920 or lines of data. There is no where close to 920 data lines or 320 properties in the file exported. If I use the property loader to load the properties to just hand it works very well, is it extra formatting that I do for the file before you import it or is it not possible to load the properties in a subsequence of a property to hand charger? Tags: NI Software Can I use my iPhone 6 bought in Hong Kong in the Canada? Can I use my iPhone 6s bought in Hong Kong in the Canada? Your question can mean two things: The answer to (1) is certainly! The answer to (2) is I'm not sure, but I do not. To have any hope of answer (2) 'Yes', you at least should: I want to integrate the ANSI C sample program ReadDigPort - ExtClk.c in my own big package. I want to use the internal clock of the BNC NI USB-6259 (.. 80 kHz 120 kHz). In the document: How can I use internal clock case OR USB - 6259 BNC for the acquisition of digital data in my own big software? It is possible to set a clock on an internal counter (for example ' Dev1/ctr0"): But it is not possible to drive this internal clock to a terminal (for example "/ PFI0/Dev1"): The sample clock source can be derived from an external terminal (for example "/ PFI0/Dev1"): But it is not possible to derive the internal counter of the clock (for example ' Dev1/ctr0"): Hi datafriend, using what it says is correct: Or sample DI source clock: Any PFI, RTSI, HAVE sample or convert clock, AO, Ctr n out internal and many other signals sample clock This means that if you do not use an external signal as clock you can use the sample clock to HAVE it on board or at the output of the internal counter. There are also 2 ANSI C examples in this regard: http://zone.NI.com/DevZone/CDA/EPD/p/ID/4485 http://zone.NI.com/DevZone/CDA/EPD/p/ID/4488 So in both cases you have to use a fictitious task you need only for the generation of the internal clock (HAVE or CTR) Can I use a Gen 4 and Gen 3 ATV on the same network? Can I use a Gen 4 and Gen 3 ATV on the same network? Yes. can you use a deskjet 970cse in black only mode when the color cartridge dries up can you use a deskjet 970cse in black only mode when the color cartridge dries up? Thank you, Jerry banhien information is very accurate. I would just add a bit of it. Because this printer uses a tricolor cartridge and a black, it should be one of the printers that will print with just the black cartridge installed. It is called print in backup mode. I should happen automatically when you remove the color cartridge and try printing. A message will arrive on the printer or the computer and ask you if you want to print in backup mode. Say yes, and it should let you print. Hope that helps. Can I use windows media player to play mp3 and have the recigition speech to convert to text? You can get on a conversion of 70% in reading a file in Windows Media Player using something like Dragon Naturally Speaking to convert. If you set the playback speed to slow in Windows Media Player to play > play speed, you will get a better result. The best option is to download the file to an audio transcription service, but which generally costs 0, 50-1, 00 per minute of audio. Can I use Draw on my desktop? Is it only the mobile app? Can I use Draw on my desktop? Is it only the mobile app? Hi EyeArt, Draw is a mobile application only. Hope that helps. Sue. can I use photoshop on a pc and a mac with the same license? Yes, just install the application of cc, https://creative.adobe.com/products/creative-cloud on each computer desktop and use it to install your programs cc. Can I use Premiere Elements for (3D) HD video editing on the SURFACE PRO 3 (i7 8 GB) in m2ts (input/output)? Elements does not support 3D, and I doubt that it is running correctly on a Surface. I don't have internet connection, so can I use offline adobe indesign, photoshop? and what is the product adobe cos cs6 is not available more... CS6 products are always available through Adobe: Buy CS6: Can I use "If", "else" statement in main.qml? Hello What statement I use within the main.qml? is there documentation for things and the statement can be used within the mian.qml (e.g. 'if', 'for', 'while') Hello Engine QML use a JavaScript interpreter. that statement is bug in Qt 4.8, so it is better to avoid it or explicit use of braces {} in the case branches. Other than that, it is simply JavaScript. Syntax information QML is located on the Web site of the project-qt: http://Qt-project.org/doc/Qt-4.8/qdeclarativeintroduction.html I suggest you browse the other articles there as well. can I use my wireless printer if it is connected to the main computer with the USB cable? My main computer runs XP Professional and is not wireless capable (that I know), my laptop running Windows 7 is wifi enabled, it can independently connect to the internet and printer (Photosmart 5510) is wifi capable but that is currently connected to the main computer with a USB cable. My question: can I use the printer to the host computer by USB and computer laptop through wireless? If yes how to configure connections? Thank you. Hello A small wifi Wireless USB on the XP machine should work just fine. You can OpenOffice.org printer to two computers wireless. I don't think that a machine can access the printer if you plan to use the USB connection or wireless. I have not tried yet, maybe next weekend. Kind regards How can I use notifications to send data from different sources for the same chart? Hello I use the model of 'Continuous measurement and logging' project comes with LV 2013. It is extremenly helpful in understanding the messaging between the acquisition, graphic and loops of newspaper. (Thank you NEITHER!) I ran into a snag though. I want to change so that my graphic loop receives notifications of data from two sources of acquisition by the declarant. I have trouble getting the data from the two sources to display on one graph. I've isolated the problem in the attached vi. Here's what happens: 1. I create 2 parallel loops data and send the data to a third parallel loop with the notifiers. 2. the third loop receives data from one of the loops because one of the authors of just receiving notifications is to expire instead of receive data. Can anyone suggest how can I fix? Thank you. -Matt Here's my modification of your VI. I put notes on the block diagram to explain the changes. He uses a queue for data transfer to avoid data loss. It uses a notifier to stop loops. All local variables and value property nodes have been eliminated. The way loops are arrested probably let some data in the queue. No more of one or two iterations of each of the loops of data acquisition. If you need ensure that all data has been displayed (or recorded in a real application), then you must stop acquiring loop first and read the queue until you know it's empty and both other loops stopped. Then stop the render loop and release the queue and the notifier. Lynn Can I use icloud to back up all my data on the iphone? My iphone memoryis used 10.5... 1.1 gig left... but I bought 50 GB on icloud... How can I automatically keep all the photos... all emails on icloud instead of taking a lot of space on my iphone? Turn on iCloud photo library: iCloud: overview of the iCloud photo library Get help with your photo library - Apple Support iCloud iCloud Photo library FAQ - Apple Support iCloud photo library automatically keeps all of your photos and videos in the original version, in high resolution. Follow these steps to choose how you store your photos and videos on your device: If you turn on [device] Optimize storage, iCloud photo library manages automatically the size of your library on your device, you can make the most of your device storage and access photos more than ever. All of your original photos, full resolution and the videos are stored in iCloud, while versions of unit size is stored on your device. You can download original photos and videos over Wi - Fi or cell phone when you need it. If you turn on download original, iCloud photo library will keep your original, full resolution photos and videos on iCloud and on your device. Download the originals is the default setting for iOS devices with 5 GB free storage plan and all Mac devices. Can I use my android phone as a remote control for the air to my iPad I have an iPad Air, can I control remotely using my phone android mobile N ° About the only thing you might be able to do is to get a basic application is which is about android and iOS, as a player (do they have an android app) and then you can use it to access the documents of these two devices (upload photos from your iPad and view them on your phone and vice versa, for example) but your phone and your iPad literally speak two different languages. I installed the new version of firefox in my portable 64-bit, but now in any site that has the box-shadow propertycss, doesn't seem to work properly. All the elements which has this property makes cross lines in this browser. It doesn't looks very we CASE # 25884573 - update RN102 6.4 he bricked. Here I would have browsed the forum before updating my RN102 at 6.4. It does not start after upgrading to 6.4 automatically via the browser. When I push the power button, nothing happens. If I pressed the power button, I hear the discs turn up, but t Original title: GameuxInstallHelper Recently, I tried to install Microsoft FSX, but at the end of installation a mistake happens that has a problem, find or reading the gameuxinstallhelper.dll. I need to find a solution. I'd appreciate if someone can My G6 laptop freezes when moved. When the battery is jostled when you move and to base it on something again it freezes even when it is plugged. When I try to open OneNote from Outlook icon, I get the following error: Before you can use this feature, OneNote must start for the first time. You can come back here and try again after you start OneNote. Someone knows the solution to the my proble
310 property values have been found.
Similar Questions
High speed M: Series Multifunction DAQ for USB - 16-bit, up to 1.25 MECH built-in BNC connectivity. / s,.
is written:
Or sample DI source clock: Any PFI, RTSI, HAVE sample or convert clock, AO, Ctr n out internal and many other signals sample clock
The digital subsystem doesn't have its own dedicated internal synchronization engine. Therefore, a sample clock must be provided another subsystem on the device or from an external source.
With what other subsystem on the device can generate a source of the clock? How?
Creates channels to generate digital impulses that define the freq and dutyCycle and adds the channel of the task that you specify with taskHandle.
DAQmxCreateCOPulseChanFreq (taskHandle, "Dev1/ctr0" units, clockName, idleState,
initialDelay, freq, the duty cycle); works
DAQmxErrChk (DAQmxCreateCOPulseChanFreq (taskHandle, "/ PFI0/Dev1", clockName, units, idleState, '))
initialDelay, freq, the duty cycle); does not work: error DAQmx: measurements: type I/O of the physical channel does not match the type of I/O required for the virtual channel you create. Name of the physical channel: PFI0. Name of the virtual channel: clock
Sets the source of the sample clock, the sample clock rate and the number of samples to acquire or generate.
DAQmxCfgSampClkTiming (taskHandle, "/ PFI0/Dev1", maximumExpectedSamplingRate, DAQmx_Val_Rising, ")
DAQmx_Val_ContSamps, bufferSize); works. Acquire or generate samples until you stop the task
DAQmxCfgSampClkTiming (taskHandle, "Dev1/ctr0", maximumExpectedSamplingRate, DAQmx_Val_Rising,
DAQmx_Val_ContSamps, bufferSize); does not work. Error: Acquire or generate samples until you stop the task: make sure that the name of the terminal is valid for the specified device. See Measurement & Automation explore valid names of terminals. Property: Property of DAQmx_SampClk_Src: DAQmx_SampClk_ActiveEdgeSource device: Terminal Source Dev1: Dev1/ctr0
The digital subsystem doesn't have its own dedicated internal synchronization engine. Therefore, a sample clock must be provided another subsystem on the device or from an external source.
----------------------Can I use iCloud photo library to save space on my device?
Maybe you are looking for