Can I use instead of AHCI RAID

Hi, I have a dell inspiron 530. In the bios there is no option AHCI. Since the RAID AHCI she does that mean I can use the same?

PS: I have 2 hard drives (no RAID). I tried to boot into windows on the first hard drive, but then it froze on startup a BSOD flashed for a few milliseconds and then he resatrted.

Thank you.

Advertisement

Hi John,.

Thanks for posting your question on the Forum of the Microsoft community.

1. have you tried to change the boot drive SATA mode?
2 are you able to boot your computer?

3. What is the error code that you get when getting BSOD?

I understand you have two independent hard drives connected to the controller. If you are able to start your computer successfully, here is an article that can help you change AHCI RAID.
Error message occurs after you change the mode of the boot drive SATA

Important: This section, method, or task contains steps that tell you how to modify the registry. However, serious problems can occur if you modify the registry incorrectly. Therefore, make sure that you proceed with caution. For added protection, back up the registry before you edit it. Then you can restore the registry if a problem occurs. For more information about how to back up and restore the registry, click on the number below to view the article in the Microsoft Knowledge Base:

How to back up and restore the registry in Windows

If you can not start at all, I suggest trying the following methods and check if they are useful.

Method 1
Please follow the underlying steps:
 
Step 1. Disconnect all external devices except the keyboard and mouse.

Step 2. I would like to start your computer in last known good configuration.

If method 1 does not work, go to method 2.

Method 2
Step 1: Try to start your system in a State of services necessary to the operation and a minimal set of drivers, active Mode without failure.
Start your computer in safe mode

Step 2: If the system works fine in safe mode, try to clean the system startup:

How to perform a clean boot in Windows

Note: See "how to reset the computer to start normally after a boot minimum troubleshooting" to prepare the computer to start as usual after a repair.

If method 2 does not work, go to method 3.

Method 3
As you cannot start your computer at all, I suggest to run a startup repair to repair the damaged boot system files and attempt to start in normal mode. See the section: how to use Startup Repair in the following link.
Startup Repair: frequently asked questions

If this does not help, try to start from an installation disc of Windows 7 to the Windows recovery environment mode and then try to run the Startup Repair tool and check if you are able to start normally.

Hope this information is useful. Let us know if you need more help, we will be happy to help you further.

Tags: Windows

Similar Questions

  • can I use instead of conditioning of analogue output signals data acquisition to provide voltage outputs analog?

    Hello guys,.

    I have a general question regarding the units of packaging such as the USB-9263 analog output signal. If I can use it instead of data acquisition to provide an analog voltage output?

    Thank you

    ELA

    Yes, the 9263 can provide 4 output channels analog voltage (+/-10 v range) with up to 1mA of current drive. Looks like: it refers to the short circuit of conditioning of signals and some protection against overvoltage. Link below is the User Guide:

    http://www.NI.com/PDF/manuals/372406b.PDF

    -AK2DM

  • IE 8 is the browser used by control panel to connect to ms update firefox can be used instead?

    I like to use firefox and ie instantly resumes when I use the control panel to check the updates.is browser descends from this task.

    MS use ActiveX controls on the update site, so you can access this site via IE and not with Firefox or other browsers.

  • Functional Global Variables: an indicator can be used instead of a shift register?

    It is a simple question, but I can't find an answer to it. The model agreed to a functional Global Variable is to use an uninitialized as in this example shift register:

    ('Référence IN' and ' Reference to "is actually a pile of references.) There is also a "Se Refnum" case, which comes the straight through the tunnels shift register.

    My question is, why can't we do store the indicator data? It is much simpler to use a shift register (IMHO a non obvious way to store global data!):

    The case "Se Refnum" does absolutely nothing. Other functions such as erasure of data can be implemented just as easily. The advantage of the FGV to help avoid race conditions is maintained because you always use the VI to access the data.

    JonP says:


    Not so much, the Inidicator can happily live outside the case structure, together and Clear would be just assign different values.

    If you have only a case structure, the indicator could not live outside of it.  In order to maintain the indicator data, your design requires that it is not written in for a case of Get.  If you have an exterior structure deal that decides on 'Get' or 'set or clear' and (in the case of "Set or clear") contains the terminal of the indicator and a classiquee case that decides on 'Set' or 'clear '.  However, I would consider this a design below using the standard template of the FGV.

    The difficulty with retrieving the value if you want to do a read operation / writing change. But LV provides many ways to retrieve data from an indicator (one you don't mention is the 'Value' property), do you mean that's all "incorrect"?

    Yes (I mean that they are all incorrect).

    You could hack your way around the design to work with a single structure of matter and the terminal of the indicator being outside using a method to read the value of the indicator and through a tunnel to the structure of the case through wiring for the tunnel of writing indicator in the case of 'Get '.  However, who will require a local Variable or value of property node.  As I said, these (I only mentioned the local Variable originally) are not good choices for performance and scalability.  If you are not aware of the functional differences between the terminals, local Variables and nodes of property value, refer to this article (obviously advantages/disadvantages such as redraw objects on the front panel are not relevant here).

    I guess you could say that indicators should only be written, but it is difficult to be pure!

    No, it's not, just use the classic design of the FGV!

  • Word Perfect is not compatible with Windows 7. What can I use instead?

    WordPerfect or treatment.

    I've recently updated my computer to windows 7. I used to have the perfect word, but it is not compatible with this new set up. How can I go on writing documents or summaries. Do I have to buy a new cd to upgrade from word perfect or is there a way I can write documents with this version of windows 7?

    You have a few options:

    You can use the built in word processor called Word Page (start > all programs > Accessories > Word Pad). It is pretty basic and does offer all of the features of a professional processing.

    You can download a free office suite that includes a treatment called Writer (free agency)

    "LibreOffice productivity Suite download ' LibreOffice

    You could buy a new version of WordPerfect, which is compatible with Windows 7, or use Microsoft Office, which includes Microsoft Word:

    Trial license:

    http://Office.Microsoft.com/en-us/try/

    Full license:

    http://support.Microsoft.com/kb/823570

    Get the key;

    http://Office.Microsoft.com/en-us/buy/redir/XT101874326.aspx?CTT=5&origin=HA101847520

  • How can I use / instead of - to separate my website'pages?

    I am doing a url like this: https://www.Adobe.com/br/products/Muse.html ,

    using the / to separate my website'pages.

    When I try to do, software changes to.

    Hello

    You must change the folder structure to get this configuration, Muse currently does not allow this. I add a few threads, which may be useful for this

    Change the structure of folders in Adobe Muse?

    How can I structure my muse with records cc site

    If you can't find something useful, please add your vote here

    Add the folder Structure for Adobe Muse

    Let me know if you have any question.

  • What can I use instead of Front Page 2004?

    Original title: I used Frontpage when you set up a Web site in 2004. I understand that Frontpage has been abandoned by Microsoft 5 years in 2006 and will not work on most of the newer servers

    My we host advises me that Front Page Express is no longer supported on new servers, this was discontinued by Microsoft in 2006. I need tp develop my site witout using the front page extensions or find another software update. Microsoft has such a product or is there any suggestions?

    Adam

    Hi hartfell.

    Microsoft has replaced with a program called Expressions Microsoft FrontPage.

    http://www.Microsoft.com/expression/default.aspx

  • What can I use instead of contribute to the update of existing Web site?

    The site is built with Dreamweaver and my colleague needs to update the text periodically. She will not enter in any of the Dreamweaver program, just use a WYSIWYG editor. I do more complex changes. Now that Contribute is no longer available, what are we doing?

    I just checked with the cat from Adobe...

    When you select Full for 'I want to buy', then contribute 6.5 in 'I have' on this page it gives you an option to $199 to contribute 6.5.

    The "I own it" is supposed to change to 'I want' when you pass upgrade to full.

  • What to use instead of Adobe Flash with Safari

    Hello, after reading about Flash I uninstalled it on my computer. Now when I go on a site that uses Adobe Flash, what can I use instead? I use Chrome and it plays the video on sites requiring Adobe Flash as Safari can not play. Chrome, what makes that Safari does not? Both Chrome and Safari are the latest versions for OS X 10.11.2

    Best regards, John

    Use Chrome when you visit sites that require Flash Player.

    Chrome browser comes with Flash Player plugin that is not integrated, Safari.

  • I can't use a website should I use with Firefox 5.0. So, I need to uninstall and go back to 3.5 or 3.6. Please notify. Also, my control panel blocks from Windows Explorer a PMP. That's why I use Firefox instead. Thanks for any help!

    I can't use a website should I use with Firefox 5.0. So, I need to uninstall and go back to 3.5 or 3.6. Please notify. Also, my control panel blocks from Windows Explorer a PMP. That's why I use Firefox instead. Thanks for any help!

    I thought it would be FAFSA is causing your problem.

    Install Portable Firefox 3.6.x on your hard drive to a Web site. This will not affect any of your current Firefox installation.

    http://PortableApps.com/apps/Internet/firefox_portable/localization#legacy36

  • Satellite A110-275: can I use FAT32 instead of NTFS with recovery CD?

    Satellite A110-275
    Can I use the file system fat32 instead of ntfs disk recovery system.

    Hello

    Well, on the Toshiba Recovery CD you will find only the ghosts.
    This ghost files contains image with all the files and data from HARD drive.
    I guess that the image was made on NTFS.

    I think it s not able to change the file system on the HARD disk without formatting or losing data on this HARD drive.
    If you want to change the FAT32 file system, you must format the HDD to FAT32.

    But I put t know why you want to do. It makes no sense to me.
    In my opinion, the NTFS system is more powerful than FAT32

  • Can I use the 2nd HD with RAID 0 in my G15-AV501 QOSMIO?

    Dear,

    I have a QOSMIO G15-AV501. This model does not support HD RAID by the BIOS, but I would use software RAID.
    The question is: can I use the 2nd HD using RAID 0 by re? I will use as RAID 0 in order to promote the overall performance. Is this possible?

    Thank you.

    Dario of Colombia.

    Hello

    I don t think you will be able to use the RAID if the laptop doesn't supports RAID and has no RAID controller.
    Usually for RAID using the RAID controller driver must be installed. This must be done at the beginning of the installation of the OS. Without this driver HARD drive can't be recognized and you will not be able to install the operating system.

    However, as I know the RAID option doesn t accelerates the overall performance.
    The RAID is useful if the first disk goes dead and restore you the data.
    RAID mirroring option saves the data on two hard disks.

  • Can I use my printer manually instead of using the wireless connection?

    Can I use my printer manually instead of using the wireless connection?

    cbg_37 wrote:

    It is an OfficeJet Pro 8610.

    Hello

    It has a print USB 2.0 port, so you can use the printer USB cable to connect it to your computer. This cable may be not in the box, please check if you first buy one (around $5 to $ 10). It is similar to:

    Kind regards.

  • What are the parameters? How are Variables differenet? Why we can not use variables to pass data to one sequnece to another? What is the advantage to use parameters instead of Variables?

    Hi all

    I am new to TestStand. Still in the learning process.

    What are the parameters? How are Variables differenet? Why we can not use variables to pass data to one sequnece to another? What is the advantage to use parameters instead of Variables?

    Thanks in advance,

    LaVIEWan

    I'm sorry... I discovered that... its not at all possible to pass data to another sequence using variables... it must be through settings... once again I apologize for the display of such a stupid question

  • Can I use a GPIB PCI instead has a HP 82350

    Can I use a card NI PCI-GPIB IEEE 488.2 in instead of a map of 82350 HP.  I want to configure a 5890 II to a PC running Windows 2000 with the Chemstation B02.01 software.  Sorry - Posted two places.

    Yes, you should be able to. The two cards are GPIB controllers. Just make sure you install the NOR-488 driver for your operating system.

Maybe you are looking for

  • How to run commands from the Terminal from the Finder?

    I would ask a series of Terminal commands in a file, then run the commands by double-clicking on the file in the Finder.  I found a number of sources on how to do on the internet, but most include comments from other users by saying: "this has not wo

  • Pavilion g6 unrecognized radeon

    HeyI have a HP laptop Pavilion g6-2017sp running windows 7 64 bit and am having problems with my graphics.Basically, I have two Radeon HD 7670 M and Intel HD Graphics 4000. the problem is that my laptop does not recognize the radeon and whenever I tr

  • I want to spend the emails saved on a disk.

    I'm AT & T/Yahoo Mail, internet Explorer. Emails stored in folders in this system. How can I move save them to disk? Thank you!

  • Keyhole DRM application is missing

    My wifes laptop continues to display this error message when it tries to run a programWhat is the cause and also what can be done to solve

  • ole32.dll registration fails

    Hi I need to register ole32.dll but it fails.  I get the following message: The module "ole32.dll" was loaded but the call to DLLRegisterServer failed with error code 0 x 8007005. I made in the framework of trying to solve a problem I have with MSOff


HashFlare