can I use instead of conditioning of analogue output signals data acquisition to provide voltage outputs analog?

Hello guys,.

I have a general question regarding the units of packaging such as the USB-9263 analog output signal. If I can use it instead of data acquisition to provide an analog voltage output?

Thank you

ELA

Yes, the 9263 can provide 4 output channels analog voltage (+/-10 v range) with up to 1mA of current drive. Looks like: it refers to the short circuit of conditioning of signals and some protection against overvoltage. Link below is the User Guide:

http://www.NI.com/PDF/manuals/372406b.PDF

-AK2DM

Tags: NI Hardware

Similar Questions

  • measure the angular speed, angle and trigger using a gyroscopic sensor breakout board and LabView data acquisition

    How to measure the angular velocity, the angle and trigger using a gyroscopic sensor breakout board and LabView data acquisition?

    There is a single channel data acquisition code which measures the angular velocity, angle and flexibility using a gyroscopic sensor breakout board and acquisition of LabView data attached to this, I need a help to creat two-channel data acquisition code?

    Hello

    Attached is a vi that you can use in order to read the measured angular position of an encoder.

    If you need more examples on the tasks that you can develop with NOR-DAQmx and LabVIEW, you just need to open LabVIEW and click Help > find examples > Input and Output material > DAQmx > entry counter.

    Kind regards

  • Can I use with NI PCI-6233 of SCXI signal conditioning

    The title says it all. I wonder if I can use my unit with the NI PCI-6233 industrial data acquisition card and if so what cable should I use between the chassi and map of SCXI signal conditioning?

    Hello Tsthorsell,

    This feature is not plausible. This can also be verified by simulating the chassis and unity, the 6233 OR cannot be selected as the transmitter/receiver.

    Best regards

    M Ali

    Technical sales engineer

    National Instruments

    www.NI.com/support

  • How can I using an apple extreme get a better signal around the House?

    How can I using an old apple extreme get a better signal around the House?

    I use an old apple express and a new express from apple.

    I need to update my extreme from apple for the last device namely a time capsule.

    Can I use my apple extreme connected to my new camera add more points around the House?

    What is the model number of the old AirPort Extreme?

    What is the model number of the old AirPort Express Terminal?

    We assume that the model number of the new AirPort Express Terminal is A1392, correct?

    What connects to what now on your network?  It looks like this?

    Internet connection > Modem > new AirPort Express?   How the old Express connects to the new Express?   Cable?  Wireless?

  • Can I use 6115 measure DC or low frequency signal

    I use 6115 OR data acquisition if put singnal superior to 100 Hz, the result is very good.

    But if the frequency below 10 Hz, the result is not fair.

    I try MAE and choose the DC coupling mode, it still can not measure DC signal.

    What can I do? or the NI6115 can measure just the DC or the lower frequency signal.

    Thank you

    Hi xsfl,

    Please try the other channel. I wanted to ask, what are the characteristics of your signal? What is a sinusoidal signal, how often, what range of amplitude? Also, have you been able to measure low frequency signals before or is this the first time you try?

    Also, remember that you are above the minimum rate, 20kS/sec, sampling sampling as to the care.

  • Functional Global Variables: an indicator can be used instead of a shift register?

    It is a simple question, but I can't find an answer to it. The model agreed to a functional Global Variable is to use an uninitialized as in this example shift register:

    ('Référence IN' and ' Reference to "is actually a pile of references.) There is also a "Se Refnum" case, which comes the straight through the tunnels shift register.

    My question is, why can't we do store the indicator data? It is much simpler to use a shift register (IMHO a non obvious way to store global data!):

    The case "Se Refnum" does absolutely nothing. Other functions such as erasure of data can be implemented just as easily. The advantage of the FGV to help avoid race conditions is maintained because you always use the VI to access the data.

    JonP says:


    Not so much, the Inidicator can happily live outside the case structure, together and Clear would be just assign different values.

    If you have only a case structure, the indicator could not live outside of it.  In order to maintain the indicator data, your design requires that it is not written in for a case of Get.  If you have an exterior structure deal that decides on 'Get' or 'set or clear' and (in the case of "Set or clear") contains the terminal of the indicator and a classiquee case that decides on 'Set' or 'clear '.  However, I would consider this a design below using the standard template of the FGV.

    The difficulty with retrieving the value if you want to do a read operation / writing change. But LV provides many ways to retrieve data from an indicator (one you don't mention is the 'Value' property), do you mean that's all "incorrect"?

    Yes (I mean that they are all incorrect).

    You could hack your way around the design to work with a single structure of matter and the terminal of the indicator being outside using a method to read the value of the indicator and through a tunnel to the structure of the case through wiring for the tunnel of writing indicator in the case of 'Get '.  However, who will require a local Variable or value of property node.  As I said, these (I only mentioned the local Variable originally) are not good choices for performance and scalability.  If you are not aware of the functional differences between the terminals, local Variables and nodes of property value, refer to this article (obviously advantages/disadvantages such as redraw objects on the front panel are not relevant here).

    I guess you could say that indicators should only be written, but it is difficult to be pure!

    No, it's not, just use the classic design of the FGV!

  • IE 8 is the browser used by control panel to connect to ms update firefox can be used instead?

    I like to use firefox and ie instantly resumes when I use the control panel to check the updates.is browser descends from this task.

    MS use ActiveX controls on the update site, so you can access this site via IE and not with Firefox or other browsers.

  • Can I use instead of AHCI RAID

    Hi, I have a dell inspiron 530. In the bios there is no option AHCI. Since the RAID AHCI she does that mean I can use the same?

    PS: I have 2 hard drives (no RAID). I tried to boot into windows on the first hard drive, but then it froze on startup a BSOD flashed for a few milliseconds and then he resatrted.

    Thank you.

    Hi John,.

    Thanks for posting your question on the Forum of the Microsoft community.

    1. have you tried to change the boot drive SATA mode?
    2 are you able to boot your computer?

    3. What is the error code that you get when getting BSOD?

    I understand you have two independent hard drives connected to the controller. If you are able to start your computer successfully, here is an article that can help you change AHCI RAID.
    Error message occurs after you change the mode of the boot drive SATA

    Important: This section, method, or task contains steps that tell you how to modify the registry. However, serious problems can occur if you modify the registry incorrectly. Therefore, make sure that you proceed with caution. For added protection, back up the registry before you edit it. Then you can restore the registry if a problem occurs. For more information about how to back up and restore the registry, click on the number below to view the article in the Microsoft Knowledge Base:

    How to back up and restore the registry in Windows

    If you can not start at all, I suggest trying the following methods and check if they are useful.

    Method 1
    Please follow the underlying steps:
     
    Step 1. Disconnect all external devices except the keyboard and mouse.

    Step 2. I would like to start your computer in last known good configuration.

    If method 1 does not work, go to method 2.

    Method 2
    Step 1: Try to start your system in a State of services necessary to the operation and a minimal set of drivers, active Mode without failure.
    Start your computer in safe mode

    Step 2: If the system works fine in safe mode, try to clean the system startup:

    How to perform a clean boot in Windows

    Note: See "how to reset the computer to start normally after a boot minimum troubleshooting" to prepare the computer to start as usual after a repair.

    If method 2 does not work, go to method 3.

    Method 3
    As you cannot start your computer at all, I suggest to run a startup repair to repair the damaged boot system files and attempt to start in normal mode. See the section: how to use Startup Repair in the following link.
    Startup Repair: frequently asked questions

    If this does not help, try to start from an installation disc of Windows 7 to the Windows recovery environment mode and then try to run the Startup Repair tool and check if you are able to start normally.

    Hope this information is useful. Let us know if you need more help, we will be happy to help you further.

  • Word Perfect is not compatible with Windows 7. What can I use instead?

    WordPerfect or treatment.

    I've recently updated my computer to windows 7. I used to have the perfect word, but it is not compatible with this new set up. How can I go on writing documents or summaries. Do I have to buy a new cd to upgrade from word perfect or is there a way I can write documents with this version of windows 7?

    You have a few options:

    You can use the built in word processor called Word Page (start > all programs > Accessories > Word Pad). It is pretty basic and does offer all of the features of a professional processing.

    You can download a free office suite that includes a treatment called Writer (free agency)

    "LibreOffice productivity Suite download ' LibreOffice

    You could buy a new version of WordPerfect, which is compatible with Windows 7, or use Microsoft Office, which includes Microsoft Word:

    Trial license:

    http://Office.Microsoft.com/en-us/try/

    Full license:

    http://support.Microsoft.com/kb/823570

    Get the key;

    http://Office.Microsoft.com/en-us/buy/redir/XT101874326.aspx?CTT=5&origin=HA101847520

  • How can I use / instead of - to separate my website'pages?

    I am doing a url like this: https://www.Adobe.com/br/products/Muse.html ,

    using the / to separate my website'pages.

    When I try to do, software changes to.

    Hello

    You must change the folder structure to get this configuration, Muse currently does not allow this. I add a few threads, which may be useful for this

    Change the structure of folders in Adobe Muse?

    How can I structure my muse with records cc site

    If you can't find something useful, please add your vote here

    Add the folder Structure for Adobe Muse

    Let me know if you have any question.

  • What can I use instead of Front Page 2004?

    Original title: I used Frontpage when you set up a Web site in 2004. I understand that Frontpage has been abandoned by Microsoft 5 years in 2006 and will not work on most of the newer servers

    My we host advises me that Front Page Express is no longer supported on new servers, this was discontinued by Microsoft in 2006. I need tp develop my site witout using the front page extensions or find another software update. Microsoft has such a product or is there any suggestions?

    Adam

    Hi hartfell.

    Microsoft has replaced with a program called Expressions Microsoft FrontPage.

    http://www.Microsoft.com/expression/default.aspx

  • What can I use instead of contribute to the update of existing Web site?

    The site is built with Dreamweaver and my colleague needs to update the text periodically. She will not enter in any of the Dreamweaver program, just use a WYSIWYG editor. I do more complex changes. Now that Contribute is no longer available, what are we doing?

    I just checked with the cat from Adobe...

    When you select Full for 'I want to buy', then contribute 6.5 in 'I have' on this page it gives you an option to $199 to contribute 6.5.

    The "I own it" is supposed to change to 'I want' when you pass upgrade to full.

  • Can I use the recovery CD without losing all my data?

    When I turn on my laptop satellite I get a message saying that the Windows system file is missing or damaged. The standard fix seems to be to repair using the Windows CD of Installation which of course I did not. I've also seen suggestions that sometimes chkdsk will fix the problem, but I can't run no more.

    The insert on the product recovery disc warns that all created files since I bought the laptop will be deleted. However, when I load the utility, I get two options. The first is to reinstall XP on my entire hard drive, and he told me that if I do that, I'll lose all my files. The second option is to install XP on a separate partition on my hard drive. He said nothing to lose all my data. Am I right in thinking that this second option will be to install XP, say, E: and I will then be able to run chkdsk on C:, or at least access C: and back up all my data?

    My deep gratitude for all the advice!

    Hello

    Sounds like you have an old Win XP Recovery disk

    Of general use of the Toshiba Recovery disk would be to format the whole HARD drive and therefore existing partitions will be deleted too I m not quite sure on the second option, you mentioned, maybe you would be able to choose a partition during the recovery process and would be able to install the operating system only on this partition without formatting the HARD drive but I m not 100% sure because it seems to be a former recovery procedure

    I would recommend another solution. You want to access the HARD drive to back up data. Right? Why you n start t Notepad using a Livecd such as Knoppix. In this case nothing would be installed on the HARD drive and the data on the HARD drive would not be affected so you can access important data and can move a HDD connected USB or flash memory stick

    After that, you can run the recovery procedure and might install Win XP on C.
    What do you think of this

  • BlackBerry Smartphones Can I use 'Cards' with WiFi (in Europe) without incurring data charges?

    Hertz offers a mobile WiFi with a rental vehicle, and I wonder if I can use 'Maps' through this system?  I should ensure that network connections are turned off?  Appreciate any expertise on this one.

    You will experience free of charge as long as you are on free wifi at all times. When I was in europe, my 'data roaming' option has been set off. I wouldn't use all data unless I was connected to a hotspot wifi somewhere, which are very common in Europe.

    To trigger data roaming services, open up your settings. Go to network connections > Mobile network. You can activate or deactivate your mobile network disabled if you do not use your phone while that in Europe or left running up to you, but for data, use the drop-down list option and set it to the off position. In this way it will not use data on any mobile network and so only when using WiFi.

  • Can we use Source accounting entity group to load the data from multiple entities with a single rule to load?


    Page 79 of erpi_admin_11123200.pdf says that "reporting entity groups are used to extract data from several reporting entities in a single data rule execution.  I use standard EBS adapter to load data in HFM application, I created a group of entity made up of several accounting entities, but I can't find a place in FDMEE where you get to select/use this group... When you define an import format you type the name and select Source (e, g. EBS) system you can select Map Source (for example EBS11 I adapter) or the accounting entity (it is what I select to define data load maps), but not both.  Note that there is no place to select the Group of accounting entity...  Location check menu group entity drop-down but it doe not my group of accounting entity which I believe is anyway something different... and creating a location and pointing to a format compatible with the selected Source adapter is no not good either... I'm confused, so is it possible to load data from several reporting entities in one rule to load or am I misreading the documentation?  Thank you in advance.

    Do not leave the field blank in the Import Format. If leave you empty to the place, when you set the rule to load data (for the location with EBS as a Source system), you will be able to select a single accounting entity or a group of accounting entity.

    You can see here

    Please mark this as useful or answer question so that others can see.

    Thank you

Maybe you are looking for

  • HP M7170N too hot to 214F. Computer stops after 1 minute

    I need some additional opinions on what may need to be replaced. In summary, here is the problem. I unplugged everything from the motherboard including USB and media players. I took out all but 1 Memory stick. Everything that is connected to the moth

  • Is it possible to use RSA keys with CLI Analyzer?

    I connect to a server and is currently the only way I can access, rather than provide my public key. Is it possible for me to specify it anywhere in the configuration? I don't see that it uses ssh-keyscan to add public keys to the host. Where I put m

  • local access over ssl vpn

    Hello Here is the configuration: (Location A) - Internet users - ASA (ssl vpn) - location situation users use ssl vpn over the Internet to connect to resources in the location b. is successful. However, A users location need access to their own netwo

  • Recommendations of the RAM to 7000 concurrent connections

    Hi allI need your kind recommendations.We have installed oracle database enterprise edition 12 c on windows server 2012. the two 64-bit.We have 14000 students. We want to provide to 7000 concurrent user connections.How much RAM we forced to 7000 conc

  • Error with a blue screen in windows 8 64-bit because of the file "cnnctfy3.sys".

    I m sending u link of this error minidump files since there were 5 error files I downloaded on OneDrive Link: https://onedrive.live.com/redir?resid=620CE0EA1DD716E9%21356 CrashFileUpdate folder_name Please help me... my laptop running very low, becau