Can I use it for packaging?

Similar Questions

• Can we use the same package for main and begotten of concurrent programs.

  Hello
  
  I use a package.procedure1 for a simultaneous program. Can I use the same package.procedure2 of a pondu simultaneous program which was called from package.procedure1? If I say incompatible as the same program of 1, which will create problems by running the 2nd program because the package is same?
  
  Thank you
  HC

  I use a package.procedure1 for a simultaneous program. Can I use the same package.procedure2 of a pondu simultaneous program which was called from package.procedure1?

  Yes you can.

  If I say incompatible as the same program of 1, which will create problems by running the 2nd program because the package is same?

  When you second the 2nd program it will not work if the 1st program execution, and he has to wait until you have completed the 1st program.

  Don't know what code you use in the first and second procedures or even in the whole, but you can try this in a TEST instance first and check whether or not it works as expected.

  Thank you
  Hussein

• Unable to take backup on Windows 7 get error code 0 x 81000019 and message backup Windows found errors on the media during a backup on it and can't use it for additional backups.

  Original title: backup Windows found errors on the media during a backup.

  original title: backup errors

  Whenever I try to do my monthly backup I get the following messages

  Backup Windows found errors on the media during a backup on it and can not use it for additional backups.

  Pleas write the following label on a blank media and insert it into D: /.

  I did and then he asked me to get in shape, I say OK and I get the same message on the media errors and I put another disc and get the same problems again. I can't find out what the problem is, what can I do to fix this problem and get a new backup?

  I now have an error 0 x 81000019

  Hello

  You did changes to the computer before the show?

  Method 1: Check if the shadow copy volume is running
  (a) click Start.
  (b) in the search box, type Services.msc.
  shadow copy Volume c) right-click and go to properties.
  (d) select Auto (Delayed) in the start menu type in the menu drop-down.

  Method 2: Clean boot
  When the computer starts to boot, programs non-Microsoft will not be started and would avoid any interruption of their share.

  How to troubleshoot a problem by performing a clean boot in Windows Vista or in Windows 7
  http://support.microsoft.com/kb/929135.

  Note: Once you are done with the boot, follow step 7 of article to reset your computer to normal startup.

  Method 3:

  Check all your drives to NTFS.

  This problem may occur if the drive is not NTFS format.

  Please follow the steps mentioned below to convert the reader:

  Using the Convert command

  1. click on the "Start" button, click "all programs" and click on "Accessories".

  2. right click on "command prompt" and click "run as administrator".

  3. in the window "Administrator: command prompt", type the following command and press ENTER.

  CONVERT %Drive% letter: / FS: NTFS

  letter of %Drive% is the driver that you want to convert. For example, type the following command to convert drive F to NTFS:

  CONVERT F:/FS: NTFS

  4. when the following message appears in the command prompt window, type the volume label of the drive that you are converting, and then press ENTER:

  The type of the file system is FAT.

  Enter the name of the current volume of reader letter %Drive%:

  Type any string of characters for the Volume name. If you simply press ENTER, it will affect 'Local disk' as the default Volume name.

  5. when the conversion to NTFS is complete, the following line appears in the command prompt window:

  "Complete conversion".

  6. restart the computer and check the result.

  Hope this information is useful.

• How can I use statistics for all the tables in a schema in SQL Developer? and how long will it take on average?

  Hello

  How can I use statistics for all the tables in a schema in SQL Developer? and how long will it take on average?

  Thank you

  Jay.

  

  Select the connection and right-click on it and select schema statistics collection

• can I use tiff for HDR files in 'fusion HDR Pro' PS cc

  can I use tiff for HDR files in 'fusion HDR Pro' PS cc

  Yes.

• I know that I get 2 downloads. I have one on my Mac. Can I use one for my laptop?

  I know that I get 2 downloads. I have one on my Mac. Can I use one for my laptop?

  Hello david,.

  That is right. Cloud software can be installed on Mac or Windows for no extra cost. No platform swap process is necessary.

  On the Mac log you just to creative.adobe.com with your Adobe ID and download the software. Same thing as you did on the PC.

  Hans-Günter

• Can we use DBMS_JOB for parallel processing?

  Hi all

  I wonder if we create 10 jobs each inserts 100 rows in a specific table. Will it be parallel? In other words, please correct me if I'm wrong, when a job starts Oracle does not wait for it until he finished. It run other respectively, right? If this logic is true, then we can use DBMS_JOB and DBMS_SCHEDULER for parallel processing?

  Thanks in advance.

  Yes, you can use these 2 packets for parallel processing. I suggest using DBMS_SCHEDULER instead, because it is much more powerful than DBMS_JOB. I noticed a kind of latency using DBMS_JOB between the presentation of each batch.

  I usually combine DBMS_SCHEDULER with DBMS_ALERT to acknowledge the completion of the work.

  As suggested, you can also use DBMS_PARALLEL_EXECUTE. This package uses the dbms_scheduler logic.

• Can I use SetFld for GenPrint of page banner fields?

  I have a form of page banner with several fields of variable top to display information specific to the batch it is included with (for the area of publication after manipulation). Currently, I put these values by assigning variables of the same name (as fields) in a DAL script called as my BachBannerBeginScript for this batch. The fields on the page banner form/section have a NOOPFUNC rule, so without that happening assign process during script DAL, they are intrinsically worthless. This has worked well so far.

  Now I have a new banner to a different batch/process page, and its purpose is to be a "synthesis report" of sorts, detailing on the banner page of General information about each document included in this batch. I take information from the batch (bch) file, read in an additional external file and aggregate the data in GVMs (to form a table, essentially) during the BatchBannerBeginScript. The problem I have now is that I have an array of variable size (based on the document time in my batch file), but I know I can't use functions allotted to me in GenData, and so I basically have to predefine as many instances of the section (if I make a report by section line) or field (if I make an article with all instances of the field about it) that I think are possible (max-scenario essentially).

  However, after that I have my article/fields defined, I always use DAL script to populate these fields. I tried to use SetFld to fill, but values do not appear in my output, leading me to believe this rule function does not work in GenPrint. Is there a better way to put all these fields that explicitly assign each instance of a field? I'd rather have a few moments in a loop that takes to a PTC instance and assigns a variable field name than to have hundreds of assign statements where I assign explicitly each possible field.

  Thank you

  Gregg

  Yes you can. In fact, it is not a rare thing to do. You just need to use the script associate banner option to identify the DAL routine to perform to make your mapping. This assumes that you have already enabled support for printing banner page. Say that the lot will have the script is the CLIENT, he would do something like this:

  < customer="">

  TransBannerBeginScript = MyScript.DAL

  I'm reasonably sure that you can declare a global script by using this same option under the < printer=""> group.  That would run on any package recipient who does not otherwise specify a different script.

• No problem at all. Company I work with that use IE w / their software online. Can I use IE for that and Firefox for all the rest?

  This company online system has been tested with IE. I met a little trouble trying to disconnect. When I log out, it takes me to the login screen, but I'm not disconnected and can not reconnect. I'll try using IE and see if the problem goes away. If so, can I use IE just for this company and use FF for everything else?

  Yes, you can even use IE as you are using Firefox, if you wish.

• PC card - can I use it for?

  Excuse my ignorance, but I have a slot for pc card on the side of my laptop (equium L20). What kind of job could I use it for? Some of my games does not work, I put some sort of bulletin of upgrade?

  Google for PC cards and you will find many solutions of PCMCIA cards.
  Lucky suggested that PCMCIA cards can be used as wireless network card, save etc, tuner TV, adapter, support of information there are many possibilities.
  But unfortunately I don t think you will be able to use these cards with all the games.

• Qosmio F20-111: need drivers Vista-&gt; Can I use drivers for F30?

  I couldn't find a driver for my laptop vista. Can I use F30 drivers for my laptop F20?

  Thank you

  Hello

  Of course, you can try to install the drivers of Qosmio F30 but the question is: drivers Vista F30 will work?
  I think you should be able to install Vista on your F20.
  But you will not be able to use the additional features of Toshiba Toshiba controls, keys FN, etc.

  PS: I found very beautiful thread in the Qosmio G20 section.
  Some of the guys discussed about Vista on the G20. Now for the G20 Vista drivers are not available, but FranciscoJr has handled this problem.

• I can't use iCloud for backup of data from third-party applications

  I use an iPod touch 6th generation and I wanted to use iCloud for backup of Twitter, IG, Pinterest etc. I've tried searching steps. So far I've been finding the same set of instructions:

  Settings > iCloud > storage > select your iDevice > turn on apps you want to iCloud to save

  But after clicking on the storage, I don't see that 'manage storage' and below, the option 'change of Plan '. Why does my iPod not not the option choose iDevice? I can see the option to save the data of integrated applications, but not applications, third-party. My iCloud that unit is on but my Photos under icloud is disabled. I really need the extra space. What seems to be the problem?

  Click Manage store (settings > iCloud > storage > Storage manage and you see what moves backup iCloud storage.)

• Hi can I use xp for dv2000 recovery disk to downgrade a dv2000 with preinstalled vista thank you

  Hello

  I have 2 laptops of dv2000 with different model No, s

  one with xp factory mounted and the other with factory installed vista

  can I use the xp from the computer recovery disks laptop xp

  to downgrade vista to xp or is it better to install windows 7 please

  Thank you very much

  maggieglanville

  Hello:

  You probably have to downgrade your laptop from Vista to XP, but you do not have a license (right to downgrade) to do with Microsoft.

  Normally, the desktop and professional laptops only received rights to downgrade to XP due to risk of operations undertaken grinding halt because of software with some programs and Vista incompatiblities.

  Personally, it is best to switch to Windows 7.

  Since your laptop with Vista, it can run Windows 7. For all the missing drivers you may need to you can use normally drivers Vista on the support page and the driver of your laptop.

  In addition, you can read through this guide for dv2000 for Windows 7 upgrade.

  http://h30434.www3.HP.com/T5/notebook-operating-systems-and/Windows-7-upgrade-guide-for-DV2000-models/TD-p/186936

  Paul

• Can I use java for the development of the playbook?

  Hi I'm new in blackberry development. I've owned playbook and that you want to develop playbook apps, but I can only develop in java. Please, someone tell me what I can use java for the development of the Tablet?

  Bilal

  # You can convert by android android applications, run-time.

  Explore these links

  https://developer.BlackBerry.com/

  https://developer.BlackBerry.com/Java/

• I bought a windows DW product code, can I use it for DW to run on my new MBP?

  DW bought a year ago and have a product code. I have now a new MBP. Can I use this code for instal DW on my mac?

  Sorry, this is version 4 or earlier than the creative cloud.

  Adobe used to allow a single platform exchange for a same license, but it's only for the current version at the time of the Exchange. When CS6 came out back in 2012, CS5 fell from the swap of platform availability list. Who could actually, fell off the list by year or earlier with the output of the CS5.5 as a stand-alone version.

  You can install Windows on your Mac and run it from there, but I heard some problems late in the program when you do it in analogies.