can I use more than 2 devices for 1 account of creative cloud?

Similar Questions

• How is it you can't use more than 126 GB of a 1.5 TB with LabVIEW Real-time hard drive?

  How is it you can't use more than 126 GB of a 1.5 TB with LabVIEW Real-time hard drive?
   
  It's only 8.3% of disk space!

  http://digital.NI.com/public.nsf/allkb/E7E2F5657B6026358625750B007201A6?OpenDocument

  The national Instrument is reformat that you drive less than 126 GB or replace the drive with a less than this size.

  Please OR tell me you go fix your LabVIEW Real Time soon, and that we will not have to wait for LabVIEW RT 9.2.1 in 2011 for this one to fix.

  http://upload.wikimedia.org/Wikipedia/Commons/9/90/Hard_drive_capacity_over_time.svg

  Readers as high as 126 GB or more have been around since mid-2002.  It's about 7 years now and LabVIEW Real-time STILL cannot use greater than 126 GB drives!  Please OR.  Do something.

  We deserve the patches for older versions of LabVIEW RT.  What about updates to LabVIEW RT.  As 7.0.2 7.1.2 7.6.2, 8.0.2, 8.2.2, 8.6.2.

  We don't need new features or versions of LabVIEW RT as 9.0 until we have some of the bugs fixed in existing versions.

  Kevin.

  
  

• Satellite Pro L40 PLS4BE: Can I use more than 2 GB of memory

  Is it possible add more than 2 GB of memory?

  What happens if I add e.g. 2 x 2 GB?

  Intel says GM965 supports 4 GB max memory...

  BR,

  Mikko

  Hello

  No you can not use more than 2 GB of RAM. You can upgrade the laptop up to 2GB (2 x 1 GB).

  > What happens if I add e.g. 2 x 2 GB?
  I think that nothing will happen ;)
  Either your laptop will not start or will start the laptop but the full RAM will not be recognized

• Can I use more than one flash drive to ready boost on Satellite L650/0ed

  Hello

  I have a toshiba Satellite L650/0ed, it's good if I use more than one drive 8 GB flash for "ready boost" - what is the maximum number of using flash-drives can devote to the "ready-boost.

  In addition, if I use a 16 gb flash drive, will this affect more memory "ready boost".

  Why the 3.5 drive seagate expansion 1 TB is not compatible for ready-boost.

  Thank you
  -Brent907

  Hi mate

  Please check this Microsoft page that describes the ReadyBosst
  http://Windows.Microsoft.com/en-us/Windows7/products/features/ReadyBoost

  There, you can find this statement:
  + ReadyBoost works with storage devices more flash. In Windows 7, it can handle more memory and even multiple devices * eight *, for a maximum of 256 GB of additional memory. +

  I hope this can be useful!

• Codes of the lesson can be used more than once?

  My students purchase the book for class and use the codes of the lesson in the back of the book. These codes may be used more than once? Sometimes my students buy used texts. Thank you!

  Yes, I use classroom in a book for Photoshop and InDesign. Thank you!

• Can I use more than 1 on 1 device icloud account?

  I'm trying to set up a family sharing. I have an itunes account id and Setup on my vista desktop. My children are new 6th generation ipod touch for Christmas. I want to implement the family sharing so that they may have music already on the itunes on the computer account and have their own accounts. It says I have to install icloud on a supported device, I did not. can I use one to touch children in order to create an account with my current id icloud and then sign out and they use their ID as usual?

  Not at the same time.

• Unrecognized USB device if I use more than four devices. WTF.

  Hey,.

  I currently use a 32-bit version of Windows Vista.  I have six slots USB which is given to me.  I use four of them at all times to my keyboard, mouse, WiFi adapter and the headset.
  Whenever I'm trying to plug a fifth device I get the error: USB device not recognized.  However if I unplug any other device, the new device will work perfectly.  And then if I try to re - connect the deleted device back in, it will not work until I have remove the fifth device.
  WTF?

  It is certainly not a question of power that I have decent food.  In addition, why inlcude 6 USB slots if there are only 4 can work at the same time?  I tried Googling for a solution and learned that a computer must be able to handle up to 127 devices, anyway.

  What can I do to fix this error?  Do I have a virus or something?

  Hello

  Check with support of the manufacturer of the system (motherboard for customized systems manufacturer) and ask for their
  Forums about known issues. Look for the updates the BIOS, chipset of low level drivers, and others
  drivers.

  There could be a power problem that the USB interface can supply only so many devices at a time. If
  power is part of the question, then external, powered USB Hub will help.

  -------------------------------------------------------------------------------

  Follow these steps to remove corruption and missing/damaged file system repair or replacement.

  Run DiskCleanup - start - all programs - Accessories - System Tools - Disk Cleanup

  Start - type in the search box - find command top - RIGHT CLICK – RUN AS ADMIN

  sfc/scannow

  How to analyze the log file entries that the Microsoft Windows Resource Checker (SFC.exe) program
  generates in Windows Vista cbs.log
  http://support.Microsoft.com/kb/928228

  Then, run checkdisk - schedule it to run at next boot, then apply OK your way out, then restart.

  How to run the check disk at startup in Vista
  http://www.Vistax64.com/tutorials/67612-check-disk-Chkdsk.html

  -----------------------------------------------

  Then lets refresh the USB stack

  Control the click Control Panel - Device Manager - no matter where in the box of white/white - then the VIEW - see the
  Devices disabled - look around (with the exception of USB controllers) for your devices (can have
  zero or more than one) and top - right click UNINSTALL.

  Control Panel - right CLICK on EVERYTHING - Serial USB controllers - Device Manager and UNINSTALL
  all except the category itself - REBOOT - it refreshes the drive and battery USB

  This KB shows XP how to and the method of Vista is identical
  http://support.Microsoft.com/kb/310575

  This is a utility to help you, but do 1 above.

  USBDeview is a small utility that lists all USB devices currently connected to your computer, thus
  as all USB devices that you previously used. Run Options and check the 1st three choices to see to it there
  Is there.

  http://www.NirSoft.NET/utils/usb_devices_view.html

  You must remove all instances of the devices and restart.

  ----------------------------------------------

  If necessary try these two:

  Tips for solving problems of USB devices - and a Mr Fixit
  http://windowshelp.Microsoft.com/Windows/en-us/help/c39bd203-f729-47a4-8351-83291e13c8a81033.mspx#EGB

  Hardware devices not detected or not working - Mr. Fixit
  http://support.Microsoft.com/GP/hardware_device_problems

  I hope this helps and happy holidays!

  Rob Brown - Microsoft MVP<- profile="" -="" windows="" expert="" -="" consumer="" :="" bicycle=""><- mark="" twain="" said="" it="">

• Can I put my Compaq Presario SR5030NX to win 8 and can it use more than 2 GB of memory so?

  Hello

  I have Windows 7 on it now and it works fine, but the specs say that it can take only 2 GB of memory. I didn't know if the Compaq Presario SR5030NX is capable of running Windows 8 and if that would allow him to use more memory, or if the memory is a hardware limitation.

  Thank you

  Tania

  The following link will offer you if HP has tested your system for Windows 8:
  http://WWW8.HP.com/us/en/Ad/Windows-8/instructions.html

  If your system is not tested, HP will not release the drivers directly for your site template Web HP.com.

  The following hyperlink will suggest if your system is compatible with Windows 8:
  http://Windows.Microsoft.com/en-us/Windows-8/upgrade-to-Windows-8

  If your system is compatible with Windows 8, most of the pilots would be available through Windows 8. If you need any specific driver, please follow these steps:
  1. in the run box, type devmgmt.msc.
  2 unknown devices would be listed as such and plotted with a yellow question mark.
  3. Select the unknown device or any other device you need of drivers and right-click to access the properties.
  4. in the Properties window, click the Details tab and select Device Instance of Id or hardware ID from the drop-down.
  5. an alphanumeric string, like this DEV_7130 & PCI\VEN_1217 & SUBSYS_012F1025 & REV_01\4 & 6B16D5B & 0 & 33F0 is the marker for the identification of the unit.
  6. Please provide this number so we can offer you the appropriate driver.

  According to the specifications of your system, the motherboard can support only 2 GB of maximum memory:

  http://support.HP.com/us-en/document/c00910113

• Can I use more than one html5/js animation produced with Flash/createjs in a Web site?

  Hi, I produce animations with Flash which will be delivered in createjs html5/js hollow. The problem is that after including the first animation in my html Web site, the rest of the animations are crushed with the first, that is why, if I attempt to insert a second animation in my site, in fact, it will replace the first animation, I had already placed...

  I already tried the following:

  -change the default canvasID to another

  -Change the resources and namespaces Javascript in Createjs export settings

  -manually change the name of the functions (lib, img, syc) in the Javacript file

  None of them seem to solve the problem. So I'm now wondering if it is actually possible to insert more than one animation in a Web site...

  I would appreciate a quick response because I am working on a project with a very tight schedule and really need to address this question right.

  Thank you very much in advance for the help.

  Then, you have made a mistake.

  Start with the two different FLAS.  one with a red rectangle on the stage and the other with a blue onstage rectangle and nothing else.  publish your html and js files.

  combine the two into one and, if you have a problem, the postcode of your a single html file and two js files.

• How to use Illustrator on mobile devices? [was: user unique creative cloud - Illustrator]

  Hello!

  Hoping someone can help me. I bought the version Creative Cloud Illustrator thinking that I would be able to edit files on my iPad when away from my office. Is this possible? I can not understand how... Can someone explain to me what to do?

  It works very well on my desktop, but I really wanted the mobile features.

  Thank you very much!

  Requirements for programs of cloud... scroll down and check each program

  -http://helpx.adobe.com/creative-cloud/system-requirements.html

  Mobile applications

• Can I use more than one USB-6008 in the same program?

  I'm working on a project that may require up to six modules USB-6008.  Before I buy more I need to know if I can use all six at once in the same Lab View program.  Can anyone help?

  Hello Nick,

  LabVIEW is capable of handel that the number of data acquisition tasks quite easily, but you have to remember that USB has a maximum bandwidth. Therefore, you have to make sure you have enough on your PC USB hubs. In general there are between two to four USB slots by hub and each of them will have a maximum flow rate which will be divided between all devices connected to this hub. So even if you can get four USB DAQ devices attached to four USB ports if they are on the same hub, you might notice significantly reduced rates of data transfer. I would say rather than buying six or more USB 6008, why not buy a PCI card that is able to handel a lot more entries with greater bandwidth.

• Can I use more than 1 layer in a single layer mask?

  Hi all!

  
  

  I am a beginner in Photoshop, so everything I do to this tent to complete the tutorials.

  
  

  At a given time of the lesson I started today, mentions of the description that I must make a selection in the left part of the image, add a layer mask and press Ctrl + Backspace to make the selection disappears. I did it, no problem.

  
  

  The next step is to do the same in the upper part of the image.

  
  

  My problem is that I already have an active layer mask and I can't repeat the same steps because I am not allowed by the program to create a second in the same layer.

  
  

  What Miss me?
  

  Its very easy really and you do not need more of a mask. The author would probably include a photo of the layers palette for orientation.

  

  I have not used a path to create the edges of the pieces of the puzzle here, but the principle is exactly the same.

  Hope that helps

  Terri

• In the Api Soap Echosign, how can I send more than one file for the signature...

  Some examples of code for sending single document...

  $client = new SoapClient(EchoSign\API::getWSDL());)

  $api = new EchoSign\API ($client, "YOUR API KEY");

  $file = EchoSign\Info\FileInfo::createFromFile('demo.pdf');

  $document = new EchoSign\Info\DocumentCreationInfo ("Test sendDocument", $file ");

  $recipients = new EchoSign\Info\RecipientInfo;

  $recipients-> addRecipient ($recipient_email);

  $document-> setRecipients ($recipients);

  $result = $api-> sendDocument ($document);

  Hello

  You will find the documentation of the DocumentCreationInfo object in the EchoSign API SOAP at https://secure.echosign.com/public/docs/EchoSignDocumentService22#DocumentCreationInfo

  You will see that you can provide an array of files in the field of fileInfos DocumentCreationInfo object.

  EchoSign also provides REST style APIs. You can access the REST API documentation at https://secure.echosign.com/public/docs/restapi/v5. You can use POST reassure API https://secure.echosign.com/public/docs/restapi/v5#! /agreements/ to send the contract and this API operation accepts also several files on demand.

  I hope this helps.

  Thank you

  Nikhil

• VMFusion5.0.3:Why I can't use more than one processor in Win8

  I ran Win8 in VMware fusion 5.0.3 I put the CPU to use 2 CPUs Win8 but Win8 uses only 1, see the screenshot below. Is this a bug? Thanks for any answer!

  

  This is just the default presentation in Windows 8, 2012. You can change it by clicking on the graph and selecting ' change the chart of "->"logical processors.

  André

• Can I use more than once the trial of a piece of software?

  I have a free account and want some software trial. I can use this piece of software once, or it does not reset?

  That is, I can Photoshop the trial and the trial then again at a later date?

  No, you cannot use the free trial again on this machine. Its just for 30 days and cannot be reset. So if you want to use, try the PS, using it on another machine.